Database Users

[Q] Can not update S4 I9506 with 4.3 Firmware

I am trying to flash 4.3 firmware onto my S4 using odin but get the following error, any ideas? I have the de bugger selected, all drivers installed as far as I am aware of?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506DTMBNA1_I9506XXUBML2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Thanks

Rotagirl2002 said:
I am trying to flash 4.3 firmware onto my S4 using odin but get the following error, any ideas? I have the de bugger selected, all drivers installed as far as I am aware of?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBNA2_I9506DTMBNA1_I9506XXUBML2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Thanks
Click to expand...
Click to collapse
Try a different cables/ports

Have noticed that my phone does not connect to samung kies does even though when I plugg my phone in windows says drivers installed? If not connecting to kies could this be the issue.
Repulsa said:
Try a different cables/ports
Click to expand...
Click to collapse

Thanks, just tried using a different port and seems to be working now.
Repulsa said:
Try a different cables/ports
Click to expand...
Click to collapse

My phone resisting odin flash

my phone is bricked, it will not flash stock rom via odin, i asked on the main forum what the log meant, i was told i needed a pit file, so i got one, and tried again, but it still fails, so here is the log, please tell me what to do.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Try Adding the pit file+the stock rom in odin and flash them together, and see if that works

did you do the download mode
Power off phone
Press and hold Home + Volume down + Power on button
Press volume up to confirm and enter download mode

i did flash the pit and stock rom together in odin, and then tried separately, and yes of course i was in download mode!!!
still no good though...

Kobro said:
i did flash the pit and stock rom together in odin, and then tried separately, and yes of course i was in download mode!!!
still no good though...
Click to expand...
Click to collapse
Try to connect mobile using SS port. i.e. the USB port with different colour in a laptop. It is also known as US 3.0 port!

Kobro said:
my phone is bricked, it will not flash stock rom via odin, i asked on the main forum what the log meant, i was told i needed a pit file, so i got one, and tried again, but it still fails, so here is the log, please tell me what to do.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It failed because you have not split the firmware first - Galaxy y does not support single file flashing
You need to split the firmware into pda modem and csc - You can do this by using splitfus2 link in my signature
However I have already split pretty much all available firmware which you can find on my firmware thread - http://forum.xda-developers.com/showthread.php?t=2568853
The one that you want based on what your odin log says will be
http://d-h.st/hOn

[AT&T S7] Please help if you can. ODIN flashing stock error

EDIT: I HAVE SOLVED THE ISSUE. I am not sure how but I got into a different download mode and the flash worked. I also used different SM-930A Files and it worked but system status is still custom.
I want to put my phone back to stock after I have installed a custom ROM. I have an AT&T S7. I get this error while flashing the firmware using Odin
----------------------------------------------------------------------------------------------------------
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
------------------------------------------------------------------------------------------------------
On the phone it says the following
"SW REV CHECK FAIL : [system]Fused 3 > Binary 1"
If you could tell me how to flash my phone back to stock without getting this error it would be very much appreciated.

I got the same error a while back. For me, it was because I was using Odin 3.11.1. Once I updated to Odin 3.12.3, the restore went smoothly. Someone correct me if that's not the way to fix this issue, but that is what worked for me.

lukemarcondes said:
I got the same error a while back. For me, it was because I was using Odin 3.11.1. Once I updated to Odin 3.12.3, the restore went smoothly. Someone correct me if that's not the way to fix this issue, but that is what worked for me.
Click to expand...
Click to collapse
I have resolved the issue. I have been trying for almost a month now to fix the phone and I finally did it. The device still says custom although I have flashed the official firmware on. Somehow I got into an alternative download mode that accepted the flash. I have no clue how I got it into the mode but it only said "downloading" and showed nothing in the top right corner. No white text.

ColbyTrip1 said:
I have resolved the issue. I have been trying for almost a month now to fix the phone and I finally did it. The device still says custom although I have flashed the official firmware on. Somehow I got into an alternative download mode that accepted the flash. I have no clue how I got it into the mode but it only said "downloading" and showed nothing in the top right corner. No white text.
Click to expand...
Click to collapse
I see. Glad you were able to fix it!

UnRoot Not Working (Save Me Please!!!)

So a few months back I followed PSouza's guide (https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039) to rooting the S7 Edge and everything worked perfectly. As of late, the phone has had many general performance issues and I decided today unrooting may be the best option for right now. So I cracked back open the thread and followed the instructions and low and behold, as always, something had to go wrong. For starters, Odin gives me a fail before it even really gets started (log below).
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!"
The phone itself gives a SW Rev check fail after that (in the download mode).
So I thought to myself I'd just keep it in the meantime and just restart it and use it for now, but low and behold I now can't leave download mode. If I restart regularly, I'm brought back to a software update failed screen, and if I switch to recovery mode (? vol up + home + power) I've wiped the cache partition as another forum suggested, but then going to reboot system now... That restart brings me right back into recovery. I currently have the phone off charger in hopes the battery dies and something changes then.
I'm also downloading the very very latest firmware update for the S7 Edge in hopes that maybe Odin will like it a bit better than this one (VZW_G935VVRU2APE1.zip).
Any ideas? Any solution that gets me a working phone again, I'll definitely make a donation to your PayPal! Thanks in advance for any help!

To anyone reading this having the same issue, follow the instructions in this post (https://forum.xda-developers.com/showpost.php?p=71133959&postcount=27) worked like a charm.

zwroberts1 said:
To anyone reading this having the same issue, follow the instructions in this post (https://forum.xda-developers.com/showpost.php?p=71133959&postcount=27) worked like a charm.
Click to expand...
Click to collapse
Have you tried using smart switch? It is a PC app by Samsung which will automatically choose the correct firmware for you, flash it and also unroot your phone. It is the easiest way to do it.

TheSproker said:
Have you tried using smart switch? It is a PC app by Samsung which will automatically choose the correct firmware for you, flash it and also unroot your phone. It is the easiest way to do it.
Click to expand...
Click to collapse
The issue I was having was that Smart Switch wasn't recognizing my phone off the bat, and when I went to emergency recovery, it would say my serial number was incorrect so it wasn't useable for me.

SM-G930V keeps rebooting after SAMSUNG logo - can't flash firmware

Hi,
i'm trying to help a friend about his phone that got into bootloop.
i asked him if he tried to do something, but he say no.
i didn't ask my fried what android version he has because i'm not sure that he know what is this, but i ask him if this can help.
this the state, it's display the pic/logo and reboot:
http://oi64.tinypic.com/k538s8.jpg
- i tried to flash stock firmware with odin and download every firmware file from here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930V/
(yes, downloaded them all!) non of them was working; this whats i see on phone in download mode:
http://oi66.tinypic.com/1z1u2i1.jpg
this is the odin version 3.13 output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5238 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
- i entered into Maintenance Boot Mode and tried 'factory mode' or any Debug mode or 'safe mode' and nothing, phone just reset and going back to bootloop.
http://oi67.tinypic.com/2lmxf09.jpg
- other thing i tried was to use Verizon Wireless Software Upgrade Assistant software;
looks very promising; phone was detected and firmware was downloaded:
AP_G930VVRS8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930VVRS8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930VVRS8CRK2_CP11296771_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_VZW_G930VVZW8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_VZW_G930VVZW8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
but it didn't flash, it's failed, so i copied the files and tried with odin and it was the same - failed.
- i tried with older versions of odin, but they display "unsupported dev" error on the phone.
- i tried with different cable and computer, one at work and other at home - no luck.
i don't know what else to try, after trying to flash 27 firmwares maybe i missing something?
i stayed up all night for this.
any help will be welcomed.

same issue
i can get the newest firmware to flash with odin 3.14 but same issue. only description difference is it seems to freeze then reboot. i have seen it progress a little further with reboots (over time) all the way to the setup screen then freeze and reboot or freeze altogether. been at this for like a week now. driving me nuts please help!! i think im going to try the s7 edge firmware see what that does.

Same exact issue. Hope someone has a solution.

Just have to say. Know the frustration. I have done the same thing with a dozen firmwares. Not as many as you and can not find the answer. If I do i will let you know.

One thing
So I finally got this file to work and pass G930VVRS9CSB1_G930VVZW9CSB1_VZW in odin 3.13. It's still rebooting though. Argh.