SM-G930V keeps rebooting after SAMSUNG logo - can't flash firmware - Verizon Samsung Galaxy S7 Questions & Answers

Hi,
i'm trying to help a friend about his phone that got into bootloop.
i asked him if he tried to do something, but he say no.
i didn't ask my fried what android version he has because i'm not sure that he know what is this, but i ask him if this can help.
this the state, it's display the pic/logo and reboot:
http://oi64.tinypic.com/k538s8.jpg
- i tried to flash stock firmware with odin and download every firmware file from here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930V/
(yes, downloaded them all!) non of them was working; this whats i see on phone in download mode:
http://oi66.tinypic.com/1z1u2i1.jpg
this is the odin version 3.13 output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5238 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
- i entered into Maintenance Boot Mode and tried 'factory mode' or any Debug mode or 'safe mode' and nothing, phone just reset and going back to bootloop.
http://oi67.tinypic.com/2lmxf09.jpg
- other thing i tried was to use Verizon Wireless Software Upgrade Assistant software;
looks very promising; phone was detected and firmware was downloaded:
AP_G930VVRS8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930VVRS8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930VVRS8CRK2_CP11296771_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_VZW_G930VVZW8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_VZW_G930VVZW8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
but it didn't flash, it's failed, so i copied the files and tried with odin and it was the same - failed.
- i tried with older versions of odin, but they display "unsupported dev" error on the phone.
- i tried with different cable and computer, one at work and other at home - no luck.
i don't know what else to try, after trying to flash 27 firmwares maybe i missing something?
i stayed up all night for this.
any help will be welcomed.

same issue
i can get the newest firmware to flash with odin 3.14 but same issue. only description difference is it seems to freeze then reboot. i have seen it progress a little further with reboots (over time) all the way to the setup screen then freeze and reboot or freeze altogether. been at this for like a week now. driving me nuts please help!! i think im going to try the s7 edge firmware see what that does.

Same exact issue. Hope someone has a solution.

Just have to say. Know the frustration. I have done the same thing with a dozen firmwares. Not as many as you and can not find the answer. If I do i will let you know.

One thing
So I finally got this file to work and pass G930VVRS9CSB1_G930VVZW9CSB1_VZW in odin 3.13. It's still rebooting though. Argh.

Related

[UNBRICK Guide][for Bootloader v1 jb only][I9195]How to unbrick your device

Disclaimer:
I'm not liable to any demage to your device, including Knox. The information here is as good as I know, there is no guarantee.
(If you like to provide extra information or have a correction, I'll add it to the OP)
>>I'm searching for more full repair firmwares (Containing, PIT, Bootloader, etc. seperated), if anyone could send me the files for I9195 and I9192 etc. i'd upload them too, please help and help others.<<
There are several types of a brick:
Bootloop (usually possible to unbrick)
Stuck at splash screen (a bit harder but still usually possible)
Hardbrick (black screen and nothing works) (there is also a possible solution but it could also mean the end)
Full brick (black screen, nothing works, even the hardbrick method doesn't work. solution could be using a JTAG)
How to unbrick a bootloop and stuck at splash screen brick
Download one of the repair firmwares from here
I9195 Here
Thanks a lot for providing the I9195 files to: @b0g
PIT file:
https://drive.google.com/file/d/0Bx2R0nz6jh17bllKenctWnVsWkE/edit?usp=sharing
Other files:
https://drive.google.com/file/d/0Bx2R0nz6jh17aEVHMHkwLVRjWVE/edit?usp=sharing
###########################################################################################
- Unzip/unrar the files
- Install usb drivers and use the Odin program
- Put the files like the following:
(file names starting with: )
Bootloader (BL) > BOOTLOADER...
PDA (AP) > CODE...
PHONE (CP) > MODEM...
CSC > CSC...
PIT > CSB...
- Make sure your device has enough charge 40% is recommended
- Enter download mode (press volume down + home + power button in the booting process for around 20 seconds)
- connect your device (Odin should say "Added")
- Click start (do NOT disconnect your device or restart your computer in the flashing process, this could make things worse)
- Wait until the phone has fully reset and enter the recovery
- Do a "Factory reset" and "Wipe cache"
- Reboot
- Done
How to unbrick a Hardbricked phone
- Buy a USB-JIG online
- Make sure that the devices battery has charged (even if it doesn't show charging animation)
- Remove your battery
- Plug the USB-JIG inside your phone
- Wait 3 minutes and put the battery back inside
- Wait 40 seconds and the "download mode" screen should appear
- Follow the steps like in the "Bootloop and stuck at splashscreen guide" as above (note: you don't have to enter download mode because using the JIG it should enter it automatically)
Credits:
Me
@b0g
reserved
edited
I9195 mirror at Google drive added
Huge thanks go to @b0g for providing the files for I9195! :good:
hi.
i search a solution repair my s4 mini for hours. tried many ways on this forum and others, but nothing works. so i found this and use the data follow the steps above to ressurrect my phone of bootloop and stuck.
odin flashs correctly i think, but after the reset the phone stucks in "recovery booting..."
i checked autoreboot and re partitition, unchecked f reset time. the odin log says everthing ok:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> persist.img.ext4
<ID:0/003> persdata.img.ext4
<ID:0/003> NON-HLOS.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
what can i do, please help?
skortax said:
hi.
i search a solution repair my s4 mini for hours. tried many ways on this forum and others, but nothing works. so i found this and use the data follow the steps above to ressurrect my phone of bootloop and stuck.
odin flashs correctly i think, but after the reset the phone stucks in "recovery booting..."
i checked autoreboot and re partitition, unchecked f reset time. the odin log says everthing ok:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> persist.img.ext4
<ID:0/003> persdata.img.ext4
<ID:0/003> NON-HLOS.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
what can i do, please help?
Click to expand...
Click to collapse
try flashing twrp recovery and wipe all then (despite external sd)
also try flashing with f reset time enabled...
thanks for the quick help. flashed twrp and it boots in recovery, but full wipe doesnt run, so i wiped manually - unfortunately i get bluescreen and i am again at the beginning.
every method i tried ends with the same result: bluescreen, blackscreen, greenscreen and every other existing screen, in every possible loop or odin stuck during the flash process
i think the problem lies deeper and can only be solved with jtag, if it is not an hardware error. what do you think?
Hi I'm having a similar issue with my i9195 getting stuck on boot screen. I think mine has something todo with the new battery i got for it, as the new one only has 3 pins and the old has 4?
one way i found of being able to boot my phone was to take out the battery plug the charger in then put the battery back in once the green battery icon shows that it is charging hold the power until it vibrates and it should (it does for me) start up, i was also able to get into recovery using the above method by holding the home and volume up as normal.
Thanks for this, I will probably use it in near future.
Please someone has the i9192???
Aronuser said:
....
I9195 Here
Thanks a lot for providing the I9195 files to: @b0g
PIT file:
https://drive.google.com/file/d/0Bx2R0nz6jh17bllKenctWnVsWkE/edit?usp=sharing
Other files:
https://drive.google.com/file/d/0Bx2R0nz6jh17aEVHMHkwLVRjWVE/edit?usp=sharing
###########################################################################################
- Unzip/unrar the files
- Install usb drivers and use the Odin program
- Put the files like the following:
(file names starting with: )
Bootloader (BL) > BOOTLOADER...
PDA (AP) > CODE...
PHONE (CP) > MODEM...
CSC > CSC...
PIT > CSB...
- Make sure your device has enough charge 40% is recommended
- Enter download mode (press volume down + home + power button in the booting process for around 20 seconds)
- connect your device (Odin should say "Added")
- Click start (do NOT disconnect your device or restart your computer in the flashing process, this could make things worse)
- Wait until the phone has fully reset and enter the recovery
- Do a "Factory reset" and "Wipe cache"
- Reboot
- Done
.....
Click to expand...
Click to collapse
hi !
can i use this part for to try to downgrade a KK firmware to JB ???!!!
have to check "re-partition" ???
Loulou-13 said:
hi !
can i use this part for to try to downgrade a KK firmware to JB ???!!!
have to check "re-partition" ???
Click to expand...
Click to collapse
yes check re partition, ah and it's not sure yet if it's possible to downgrade from KK i wanna know myself please tell me the result if you know it
yes ,i think i will try it , but i'm "nervious" with re-partition and pit ! i'm a little afraid ...
i would have prefered an advise to a person"spécialist" who know Samsung very well ...... before testing with this flash .
but i know "re-partition" and Odin (I have already had olds Samsungs )
it's principaly the **** of **** of ****** of HELL "Knox" who scares me ...
The pit here is REALLY the good ???
There are devises who have good(s) method(s) for to downgrade , there are other that it's really impossible ..... but for the S4-mini ,nobody have done expérimenations about ,no tutorials ...etc ...
everybody flash as one file .tar now ...
EDIT !
maybe the master @arco68 can answer to this problem ???!!!
... no idea ?!
Hello, can you please help me? I have problems with random restarting of my i9195 S4 Mini (Vodafone). I tried to flash another official ROM, but this problem remains. When I try flash back original stock ROM (or any other ROM - with root or without root), the results are still same - FAIL message in ODIN after aboot.mbn file.
I tried this guide, but again, everything was ended with fail message (check the attached log).
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can you please help me and tell me what I can do if I want to put back any stock ROM? I am going crazy with the fail message which shows me in every try. Checked with Odin 3.09, 3.07, 1.83 and still no success.
jerrry said:
Hello, can you please help me? I have problems with random restarting of my i9195 S4 Mini (Vodafone). I tried to flash another official ROM, but this problem remains. When I try flash back original stock ROM (or any other ROM - with root or without root), the results are still same - FAIL message in ODIN after aboot.mbn file.
Can you please help me and tell me what I can do if I want to put back any stock ROM? I am going crazy with the fail message which shows me in every try. Checked with Odin 3.09, 3.07, 1.83 and still no success.
Click to expand...
Click to collapse
Can you tell what is the text in download mode screen? If the last 2 lines say BOOTLOADER SW REV : 2, then you have latest bootloader and IT IS IMPOSSIBLE TO DOWNGRADE.
sasank360 said:
Can you tell what is the text in download mode screen? If the last 2 lines say BOOTLOADER SW REV : 2, then you have latest bootloader and IT IS IMPOSSIBLE TO DOWNGRADE.
Click to expand...
Click to collapse
Thank you for reply. Yes, I have Bootloader AP SWREV: 2. But what can I do if I want to change actual ROM which is flashed in device? I would like to get back original Vodafone ROM (stock), but I can't do anything (flash same ROM which is now in device, flash Vodafone ROM, flash custom ROM).
jerrry said:
Hello, can you please help me? I have problems with random restarting of my i9195 S4 Mini (Vodafone). I tried to flash another official ROM, but this problem remains. When I try flash back original stock ROM (or any other ROM - with root or without root), the results are still same - FAIL message in ODIN after aboot.mbn file.
I tried this guide, but again, everything was ended with fail message (check the attached log).
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9195XXUBML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9195OXABML4_2340422_REV01_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can you please help me and tell me what I can do if I want to put back any stock ROM? I am going crazy with the fail message which shows me in every try. Checked with Odin 3.09, 3.07, 1.83 and still no success.
Click to expand...
Click to collapse
I had the same issue (aboot.mbn failing and finally I managed to fix it by flashing I9195XXUCNE6_I9195OXACNE6_DBT with Odin 3.09. Downloaded the firmware from sammobile (http://www.sammobile.com/firmwares/3/?confirm=31540). Had to wipe data/cache after flashing the ROM. Not the ROM I wanted, but at least now I have a working S4 mini again.
jerrry said:
Thank you for reply. Yes, I have Bootloader AP SWREV: 2. But what can I do if I want to change actual ROM which is flashed in device? I would like to get back original Vodafone ROM (stock), but I can't do anything (flash same ROM which is now in device, flash Vodafone ROM, flash custom ROM).
Click to expand...
Click to collapse
skip the modem file and the bootloader file at flashing and you should be fine
Aronuser said:
skip the modem file and the bootloader file at flashing and you should be fine
Click to expand...
Click to collapse
How can I skip these files? Because in ODIN I am selecting just only one file.

[i9506] Bricked after bad ODIN flash.

Hi! Today I tried to flash the official LP ROM from i9506 Lolipop Official Samsung firmware 5.0.1 by mar10o, but ODIN froze, and gave the output at the end. Now my phone is hard-bricked. Battery is at 70-80%, but it won't start at all. I have no Download Mode nor Recovery. I need help, or at least guidance of what I could do next. I've searched for hours but I haven't found a viable method to reflash the phone., or at least have it do anything at all. I already know that I'm srewed, but maybe someone know how to connect to the phone somehow.
Thanks for your time!
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUDOD3_I9506NEEDOD4_I9506XXUDOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
How can it be hard bricked? As far as I can see, it didn't even flash anything.
Try booting in download mode with battery out and connected to charger.
Try booting in download mode with battery out and connected to charger and putting the battery back in.
Alexmontboik said:
Hi! Today I tried to flash the official LP ROM from i9506 Lolipop Official Samsung firmware 5.0.1 by mar10o, but ODIN froze, and gave the output at the end. Now my phone is hard-bricked. Battery is at 70-80%, but it won't start at all. I have no Download Mode nor Recovery. I need help, or at least guidance of what I could do next. I've searched for hours but I haven't found a viable method to reflash the phone., or at least have it do anything at all. I already know that I'm srewed, but maybe someone know how to connect to the phone somehow.
Thanks for your time!
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUDOD3_I9506NEEDOD4_I9506XXUDOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Hi,
Based on the ODIN log that you post, the installation interrupted because you accidentally remove your phone from your computer during initialization (if you don't do it so, might be bad USB cable). As all files are removed, you'll find yourself on a dead phone (in other words, Hard Bricked). The only way is to go to nearest Samsung Service Center, unfortunately.

Soft bricked GT-i9050 need help please...

I got my Samsung galaxy S4 GT-i9505 with build number I9505XXUEMK9.
After I got it, I noticed the LTE option is not available and after some research, I found out I have to edit one file with rooting.
So I went to try rooting with KingoRoot APK, and eventually got KNOX warning everywhere, I edited the file that hides the LTE network option and tried to remove root from the app but failed. I didn't really care because KNOX eventually stopped appearing and I can use LTE just fine.
I noticed an update for this phone around December 2015 which is Lollipop 5.0.1 from the internet and want to revert it back to official ROM.
At the moment, the phone's current status is "Custom".
My phone has been factory reset because of some reason and the LTE option is gone again. The status is still custom and KingoRoot SuperUser is still there.
I finally tried to root it for real this time by following this guide http://www.teamandroid.com/2013/11/30/root-xxuemk9-android-43-galaxy-s4-lte-i9505-firmware/
As I try it, the Odin give me FAIL status and I don't know what to do so I just put out the battery.
After trying to boot, the screen shows me "Firmware upgrade encountered an issue"
Then I tried to just flash everything to stock and upgrades to the lollipop instead so I went following this guide : http://forum.xda-developers.com/showthread.php?t=2265477
I downloaded new Odin3 v3.10 and Latest lollipop 5.0.1 I9505XXUHOA7_OXAHOA7.zip from above link
I browsed BL, AP, CP, CSC without PIT file in odin and tried to flash it, FAIL occured
I tried again with PIT file, same FAIL
this is the screenshot
https://www.dropbox.com/s/p9cmlval55sexcd/2016-04-18 21_18_36-Greenshot.png
The odin log shows this
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9505OXAHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
The phone however, only shows :
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM (it was official before I tried rooting)
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
START [224,1440]
START [224,1440] (2nd attemps with PIT file)
Please help, I really need to fix this soon. Thanks!
FIXED
I just switched to my laptop and try flashing via laptop and it works without problem!

UnRoot Not Working (Save Me Please!!!)

So a few months back I followed PSouza's guide (https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039) to rooting the S7 Edge and everything worked perfectly. As of late, the phone has had many general performance issues and I decided today unrooting may be the best option for right now. So I cracked back open the thread and followed the instructions and low and behold, as always, something had to go wrong. For starters, Odin gives me a fail before it even really gets started (log below).
"<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!"
The phone itself gives a SW Rev check fail after that (in the download mode).
So I thought to myself I'd just keep it in the meantime and just restart it and use it for now, but low and behold I now can't leave download mode. If I restart regularly, I'm brought back to a software update failed screen, and if I switch to recovery mode (? vol up + home + power) I've wiped the cache partition as another forum suggested, but then going to reboot system now... That restart brings me right back into recovery. I currently have the phone off charger in hopes the battery dies and something changes then.
I'm also downloading the very very latest firmware update for the S7 Edge in hopes that maybe Odin will like it a bit better than this one (VZW_G935VVRU2APE1.zip).
Any ideas? Any solution that gets me a working phone again, I'll definitely make a donation to your PayPal! Thanks in advance for any help!
To anyone reading this having the same issue, follow the instructions in this post (https://forum.xda-developers.com/showpost.php?p=71133959&postcount=27) worked like a charm.
zwroberts1 said:
To anyone reading this having the same issue, follow the instructions in this post (https://forum.xda-developers.com/showpost.php?p=71133959&postcount=27) worked like a charm.
Click to expand...
Click to collapse
Have you tried using smart switch? It is a PC app by Samsung which will automatically choose the correct firmware for you, flash it and also unroot your phone. It is the easiest way to do it.
TheSproker said:
Have you tried using smart switch? It is a PC app by Samsung which will automatically choose the correct firmware for you, flash it and also unroot your phone. It is the easiest way to do it.
Click to expand...
Click to collapse
The issue I was having was that Smart Switch wasn't recognizing my phone off the bat, and when I went to emergency recovery, it would say my serial number was incorrect so it wasn't useable for me.

Odin Fail

Hey guys,
Im trying to flash stock rom using odin.
Fail at the system img
YES that is firmware for my model
I dont have frp lock
I rooted my phone,
Installed this rom,
rom worked,
tried to root because i have tripped knox and i want to change build prop for samsung s health,
installed twrp,
rebooted,
data werification failed,
trying flash rom for stock,
and this error
odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> modem_debug.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I siting on this 2 hours. Pls help
Solved:
Checked the update bootloader box in options
I have s7 SM-G930F on running 6.0.1 masmellow..
Now I want to update to Oreo or nugget..
So I downloaded the oreo zip file from sammobile.and odin.. then I flash ... it's fail odin say "re partion operation fail "
Then I try to flash nougat but fails same.
Then I try with masmellow but it fail again same issue..
Then I try to install TWRP it's fail ..
Try to root with CF auto root but fail...
Drivers OK
Correct file I'm sure..cables ok...
(I flash before s2 s3 s4 s5 s6 s7edge root/costume rom)
Plzzzzz help me gyz ...

Categories

Resources