I got my Samsung galaxy S4 GT-i9505 with build number I9505XXUEMK9.
After I got it, I noticed the LTE option is not available and after some research, I found out I have to edit one file with rooting.
So I went to try rooting with KingoRoot APK, and eventually got KNOX warning everywhere, I edited the file that hides the LTE network option and tried to remove root from the app but failed. I didn't really care because KNOX eventually stopped appearing and I can use LTE just fine.
I noticed an update for this phone around December 2015 which is Lollipop 5.0.1 from the internet and want to revert it back to official ROM.
At the moment, the phone's current status is "Custom".
My phone has been factory reset because of some reason and the LTE option is gone again. The status is still custom and KingoRoot SuperUser is still there.
I finally tried to root it for real this time by following this guide http://www.teamandroid.com/2013/11/30/root-xxuemk9-android-43-galaxy-s4-lte-i9505-firmware/
As I try it, the Odin give me FAIL status and I don't know what to do so I just put out the battery.
After trying to boot, the screen shows me "Firmware upgrade encountered an issue"
Then I tried to just flash everything to stock and upgrades to the lollipop instead so I went following this guide : http://forum.xda-developers.com/showthread.php?t=2265477
I downloaded new Odin3 v3.10 and Latest lollipop 5.0.1 I9505XXUHOA7_OXAHOA7.zip from above link
I browsed BL, AP, CP, CSC without PIT file in odin and tried to flash it, FAIL occured
I tried again with PIT file, same FAIL
this is the screenshot
https://www.dropbox.com/s/p9cmlval55sexcd/2016-04-18 21_18_36-Greenshot.png
The odin log shows this
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9505OXAHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
The phone however, only shows :
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM (it was official before I tried rooting)
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
START [224,1440]
START [224,1440] (2nd attemps with PIT file)
Please help, I really need to fix this soon. Thanks!
FIXED
I just switched to my laptop and try flashing via laptop and it works without problem!
Related
I tried to root my phone for the first time. I saw a guide on Youtube and decided why not. It was relatively easy to follow and I am sure I followed it 100% correctly. I managed to see SuperSU, however, it failed to install the proper packages and would always tell me to reboot. Other problems I encountered were Google Play would not open, and every couple of seconds a service would stop working along with it. So I decided to un-root my phone. I found a factory version SM-G395PVPU2APC5, went into download mode, and as of right now it has been stuck here every since. I can alternate between download mode and boot mode but that's about it. I couldn't properly install the factory version because this message pops up every time I try:
ODIN MODE (HIGHSPEED)
PRODUCT NAME: SM-G395P
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FAP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
AP SWAEV: B4(2,1,1,1,) K1 S3
SECURE DOWNLOAD: ENABLE
SW REV CHECK FAIL: [system]Fused 3 > Binary 1
On Odin it has a similar message:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please, please help. I have looked everywhere for hours to try and find a solution. I have downloaded gigabytes upon gigabytes of different factory versions, I think I am going insane because of this problem.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that happened twice while trying to flash stock nougat firmware after some buggy custom roms.
smart switch from samsung for drivers on windows 10 installed, com 4 connected, whenever i try to flash the 4 parted firmware (cl, bl, ap,csc) it gives me a fail after some time with log above.
thanks for any help how to get back to stock
device wants me to use emergency recovery from smart switch but end of month small bandwith left i would have liked to prevent downloading another 4gb through smart switch as i have the nougat stock files on hdd.
thanks!
Hey guys,
Im trying to flash stock rom using odin.
Fail at the system img
YES that is firmware for my model
I dont have frp lock
I rooted my phone,
Installed this rom,
rom worked,
tried to root because i have tripped knox and i want to change build prop for samsung s health,
installed twrp,
rebooted,
data werification failed,
trying flash rom for stock,
and this error
odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> modem_debug.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I siting on this 2 hours. Pls help
Solved:
Checked the update bootloader box in options
I have s7 SM-G930F on running 6.0.1 masmellow..
Now I want to update to Oreo or nugget..
So I downloaded the oreo zip file from sammobile.and odin.. then I flash ... it's fail odin say "re partion operation fail "
Then I try to flash nougat but fails same.
Then I try with masmellow but it fail again same issue..
Then I try to install TWRP it's fail ..
Try to root with CF auto root but fail...
Drivers OK
Correct file I'm sure..cables ok...
(I flash before s2 s3 s4 s5 s6 s7edge root/costume rom)
Plzzzzz help me gyz ...
Hello guys.
So yesterday i tried to root my chinese qualcomm variant of s7 edge with the help of this site https://www.the***********.com/root-qualcomm-galaxy-s7-edge-nougat/ ..
I enabled usb debugging, enabled oem unlock, unlocked bootloader with the help of the link i found in xda ,set up samsung drivers and adb in my pc and proceeded with the steps mentioned..
i flashed the .tar file and it did succeed but after it rebooted i got stuck in the samsung logo
... it showed warranty bit : kernel on the top left
After that i panicked and searched up xda and stubled upon this thread https://forum.xda-developers.com/s7-edge/help/s7edge-g9350-qualcomm-english-hk-rom-t3429535
I did all the mentioned steps but it showed failed in odin
then i tried to install https://www.teamandroid.com/2018/07...0-china-galaxy-s7-edge-g9350-oreo-firmware/2/ but to no avail
after this i got this in odin
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4948 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
....
And now it is stuck in a boot loop i can only access the download mode.. i cannot go to recovery mode at all
every time i press the power button or try to go to recovery mode it says recovery booting , set warranty: recovery and then disappears within a second
Is my device hard bricked ? Please help me I really dont know what to do next .. thanks in advance
DOES UR ISSUE RESOLVED
After rooting my Samsung Galaxy S8 I accidentally wiped all data including the OS. I'm completely new to this and wish for some detailed help from a professional.
Odin keeps giving a fail at param.bin using different ROMs. I've heard it might be the bootloader version that's incompatible but I'm not sure what to do and which bootloader version I have. I'm using the same firmware I've downloaded from sammobile before for my model number SM-G950F and even an extra one with Android pie on it, the same android version before this happened, but to no avail. Here is the log from Odin. Appreciate all help since I wiped the data after being stuck in the bootloader with a Samsung logo on it (alone) but after wiping everything it's the screen before it with the samsung logo AND "powered by android".
It may be relevant to note that I'd rather use Odin than an SD-card.
Edit: I checked the download screen on my s8 and found an error saying that SW REV. Failed Bootloader device 6 binary 4. I checked next to SWREV: B:6
So it apparently is a binary incompatibility for bootloader. Now my question is where can I find the suitable binary? All I see while downloading firmware is the model version and the date but not the binary.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5716 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks in advance!
It worked!
So as a beginner's guide you need to check the error code given after failing in Odin in the download screen in the phone itself at the end of these codes.
My error code was as mentioned in the edit that I was trying to install a firmware with a binary version 4 whereas my device's version is 6. To find the correct firmware version you need to look for the part in the PDA code where it says U6 or U5 or U4 (binary version 6, 5 or 4 as examples respectively).
PDA code is for example: G950FXXU6DSK9 as in my case. This is different from the CSC code, you can find both in the sammobile website. You just have to compare your device's binary version found next to SWREV and identified with a B up among the codes in the download screen of your phone (after holding volume down power and bixby at the same time).
That's it. Special thanks to ZeroXO who contributed to the resolution of the issue and was very helpful ^^
Kindly share your experiences after you rooted your device. What are the pros n cons?