Hey guys,
Im trying to flash stock rom using odin.
Fail at the system img
YES that is firmware for my model
I dont have frp lock
I rooted my phone,
Installed this rom,
rom worked,
tried to root because i have tripped knox and i want to change build prop for samsung s health,
installed twrp,
rebooted,
data werification failed,
trying flash rom for stock,
and this error
odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> modem_debug.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I siting on this 2 hours. Pls help
Solved:
Checked the update bootloader box in options
I have s7 SM-G930F on running 6.0.1 masmellow..
Now I want to update to Oreo or nugget..
So I downloaded the oreo zip file from sammobile.and odin.. then I flash ... it's fail odin say "re partion operation fail "
Then I try to flash nougat but fails same.
Then I try with masmellow but it fail again same issue..
Then I try to install TWRP it's fail ..
Try to root with CF auto root but fail...
Drivers OK
Correct file I'm sure..cables ok...
(I flash before s2 s3 s4 s5 s6 s7edge root/costume rom)
Plzzzzz help me gyz ...
Related
I got my Samsung galaxy S4 GT-i9505 with build number I9505XXUEMK9.
After I got it, I noticed the LTE option is not available and after some research, I found out I have to edit one file with rooting.
So I went to try rooting with KingoRoot APK, and eventually got KNOX warning everywhere, I edited the file that hides the LTE network option and tried to remove root from the app but failed. I didn't really care because KNOX eventually stopped appearing and I can use LTE just fine.
I noticed an update for this phone around December 2015 which is Lollipop 5.0.1 from the internet and want to revert it back to official ROM.
At the moment, the phone's current status is "Custom".
My phone has been factory reset because of some reason and the LTE option is gone again. The status is still custom and KingoRoot SuperUser is still there.
I finally tried to root it for real this time by following this guide http://www.teamandroid.com/2013/11/30/root-xxuemk9-android-43-galaxy-s4-lte-i9505-firmware/
As I try it, the Odin give me FAIL status and I don't know what to do so I just put out the battery.
After trying to boot, the screen shows me "Firmware upgrade encountered an issue"
Then I tried to just flash everything to stock and upgrades to the lollipop instead so I went following this guide : http://forum.xda-developers.com/showthread.php?t=2265477
I downloaded new Odin3 v3.10 and Latest lollipop 5.0.1 I9505XXUHOA7_OXAHOA7.zip from above link
I browsed BL, AP, CP, CSC without PIT file in odin and tried to flash it, FAIL occured
I tried again with PIT file, same FAIL
this is the screenshot
https://www.dropbox.com/s/p9cmlval55sexcd/2016-04-18 21_18_36-Greenshot.png
The odin log shows this
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9505OXAHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
The phone however, only shows :
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM (it was official before I tried rooting)
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK : 0x0
KNOX WARRANTY VOID : 0x0
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
START [224,1440]
START [224,1440] (2nd attemps with PIT file)
Please help, I really need to fix this soon. Thanks!
FIXED
I just switched to my laptop and try flashing via laptop and it works without problem!
Hi. Recently i've updated my Note 5 to Nougat and trying to root my phone. At first when i flashed TWRP is successful.
But after that my phone just bootloops endlessly. I tried flashing back to the stock but my device says SYSTEM REV. CHECK FAIL. DEVICE:1 BINARY: 0
please help me as im in need of my phone and all my important datas is inside my device :crying::crying::crying:
and here i include odin log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that happened twice while trying to flash stock nougat firmware after some buggy custom roms.
smart switch from samsung for drivers on windows 10 installed, com 4 connected, whenever i try to flash the 4 parted firmware (cl, bl, ap,csc) it gives me a fail after some time with log above.
thanks for any help how to get back to stock
device wants me to use emergency recovery from smart switch but end of month small bandwith left i would have liked to prevent downloading another 4gb through smart switch as i have the nougat stock files on hdd.
thanks!
I installed twrp, it worked fine other than data mount thing, tried to reinstall twrp but doing something different to try and get around the data mount, still no data mount, but twrp installed fine and my phone booted like normal except nothing from google would work, couldn't even add an account, it would just go to a black screen
So tried wiping dalvik and cache (found the data mount fix) that didnt work so figured at least try and flash a new rom as it seems to be an issue with my rom, well I tried flashing a rom, it said it installed correctly in the set up but then it sat for over 10 minutes on the black samsung galaxy s8 screen
So figuring it wasnt working I decided to try and flash stock rom, I downloaded it, followed the Odin guide, do I only need to flash the AP file?
This is Odin's log
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img.lz4
And it just sits there, right now at 20+ minutes, no indication that anything is being done on phone of within odin
Any help you can offer?
Im on latest 2CRED May firmware and downloaded the right file for that from updato (sammobile is too slow to wait on those downloads)
Should I just suck it up and download from sammobile?
Thanks
Well I figured I needed to flash all four things and that seems to have helped some, but now its stuck at Set Partition
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin.lz4
NVM Im an idiot, I wasnt on the most recent odin
Hello guys.
So yesterday i tried to root my chinese qualcomm variant of s7 edge with the help of this site https://www.the***********.com/root-qualcomm-galaxy-s7-edge-nougat/ ..
I enabled usb debugging, enabled oem unlock, unlocked bootloader with the help of the link i found in xda ,set up samsung drivers and adb in my pc and proceeded with the steps mentioned..
i flashed the .tar file and it did succeed but after it rebooted i got stuck in the samsung logo
... it showed warranty bit : kernel on the top left
After that i panicked and searched up xda and stubled upon this thread https://forum.xda-developers.com/s7-edge/help/s7edge-g9350-qualcomm-english-hk-rom-t3429535
I did all the mentioned steps but it showed failed in odin
then i tried to install https://www.teamandroid.com/2018/07...0-china-galaxy-s7-edge-g9350-oreo-firmware/2/ but to no avail
after this i got this in odin
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4948 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
....
And now it is stuck in a boot loop i can only access the download mode.. i cannot go to recovery mode at all
every time i press the power button or try to go to recovery mode it says recovery booting , set warranty: recovery and then disappears within a second
Is my device hard bricked ? Please help me I really dont know what to do next .. thanks in advance
DOES UR ISSUE RESOLVED