I installed twrp, it worked fine other than data mount thing, tried to reinstall twrp but doing something different to try and get around the data mount, still no data mount, but twrp installed fine and my phone booted like normal except nothing from google would work, couldn't even add an account, it would just go to a black screen
So tried wiping dalvik and cache (found the data mount fix) that didnt work so figured at least try and flash a new rom as it seems to be an issue with my rom, well I tried flashing a rom, it said it installed correctly in the set up but then it sat for over 10 minutes on the black samsung galaxy s8 screen
So figuring it wasnt working I decided to try and flash stock rom, I downloaded it, followed the Odin guide, do I only need to flash the AP file?
This is Odin's log
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img.lz4
And it just sits there, right now at 20+ minutes, no indication that anything is being done on phone of within odin
Any help you can offer?
Im on latest 2CRED May firmware and downloaded the right file for that from updato (sammobile is too slow to wait on those downloads)
Should I just suck it up and download from sammobile?
Thanks
Well I figured I needed to flash all four things and that seems to have helped some, but now its stuck at Set Partition
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin.lz4
NVM Im an idiot, I wasnt on the most recent odin
Related
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that happened twice while trying to flash stock nougat firmware after some buggy custom roms.
smart switch from samsung for drivers on windows 10 installed, com 4 connected, whenever i try to flash the 4 parted firmware (cl, bl, ap,csc) it gives me a fail after some time with log above.
thanks for any help how to get back to stock
device wants me to use emergency recovery from smart switch but end of month small bandwith left i would have liked to prevent downloading another 4gb through smart switch as i have the nougat stock files on hdd.
thanks!
Hello,
I've been on a custom ROM for a few weeks and wanted to go back to Stock now that Oreo has been released.
I'm having difficulty to install stock using Odin 3.1.2 using latest stock firmware.
This is my log from Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
The boxes doesn't show any progression or FAIL.
ME TOO ...Anybody knows Why?... in the past I used Odin several times and ever works fine.. So now I reinstall the drivers, change the PC, USB Cable, etc... and nothing...
I just flash only the BL and this is the result:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin.lz4
Please help us...
coiae said:
ME TOO ...Anybody knows Why?... in the past I used Odin several times and ever works fine.. So now I reinstall the drivers, change the PC, USB Cable, etc... and nothing...
I just flash only the BL and this is the result:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin.lz4
Please help us...
Click to expand...
Click to collapse
Are you using the latest version of Odin?
for me, if i don't flash my personal branded firmware (oreo or nougat) it fails. i must flash only my ITV (italy nobrand). if i try to flash TIM branded ita, it fails
Thanx adj998. You have all reason. My version of ODIN was 3.12.3 and this version don't work with the latest firmware of Samsung S8.
I am looking on Internet.... and that's it... I find a new version of ODIN 3.13.. See attachment
All working perfect. (This link have the last version)
https://www.theandroidsoul.com/download-odin/
adj998 said:
Are you using the latest version of Odin?
Click to expand...
Click to collapse
coiae said:
Thanx adj998. You have all reason. My version of ODIN was 3.12.3 and this version don't work with the latest firmware of Samsung S8.
I am looking on Internet.... and that's it... I find a new version of ODIN 3.13.. See attachment
All working perfect. (This link have the last version)
https://www.theandroidsoul.com/download-odin/
Click to expand...
Click to collapse
Awesome glad it worked for you
Managed to go back to stock but my apps still think I am rooted. Any ideas why? Is it the firmware?
adicken said:
Managed to go back to stock but my apps still think I am rooted. Any ideas why? Is it the firmware?
Click to expand...
Click to collapse
If you've rooted a g950f/g955f, then you've tripped Knox permanently, even if you install stock firmware it will stay tripped. Because of this, any Samsung app that uses Knox such as s-health and s-pay, and so on will say you are rooted, only way to solve this issue is to flash custom rom
Hey guys,
Im trying to flash stock rom using odin.
Fail at the system img
YES that is firmware for my model
I dont have frp lock
I rooted my phone,
Installed this rom,
rom worked,
tried to root because i have tripped knox and i want to change build prop for samsung s health,
installed twrp,
rebooted,
data werification failed,
trying flash rom for stock,
and this error
odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> modem_debug.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I siting on this 2 hours. Pls help
Solved:
Checked the update bootloader box in options
I have s7 SM-G930F on running 6.0.1 masmellow..
Now I want to update to Oreo or nugget..
So I downloaded the oreo zip file from sammobile.and odin.. then I flash ... it's fail odin say "re partion operation fail "
Then I try to flash nougat but fails same.
Then I try with masmellow but it fail again same issue..
Then I try to install TWRP it's fail ..
Try to root with CF auto root but fail...
Drivers OK
Correct file I'm sure..cables ok...
(I flash before s2 s3 s4 s5 s6 s7edge root/costume rom)
Plzzzzz help me gyz ...
Hi,
i'm trying to help a friend about his phone that got into bootloop.
i asked him if he tried to do something, but he say no.
i didn't ask my fried what android version he has because i'm not sure that he know what is this, but i ask him if this can help.
this the state, it's display the pic/logo and reboot:
http://oi64.tinypic.com/k538s8.jpg
- i tried to flash stock firmware with odin and download every firmware file from here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930V/
(yes, downloaded them all!) non of them was working; this whats i see on phone in download mode:
http://oi66.tinypic.com/1z1u2i1.jpg
this is the odin version 3.13 output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 5238 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> emmc_appsboot.mbn
<ID:0/004> lksecapp.mbn
<ID:0/004> xbl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
- i entered into Maintenance Boot Mode and tried 'factory mode' or any Debug mode or 'safe mode' and nothing, phone just reset and going back to bootloop.
http://oi67.tinypic.com/2lmxf09.jpg
- other thing i tried was to use Verizon Wireless Software Upgrade Assistant software;
looks very promising; phone was detected and firmware was downloaded:
AP_G930VVRS8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G930VVRS8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G930VVRS8CRK2_CP11296771_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_VZW_G930VVZW8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_VZW_G930VVZW8CRK2_CL14274519_QB20800341_REV02_user_low_ship_MULTI_CERT.tar.md5
but it didn't flash, it's failed, so i copied the files and tried with odin and it was the same - failed.
- i tried with older versions of odin, but they display "unsupported dev" error on the phone.
- i tried with different cable and computer, one at work and other at home - no luck.
i don't know what else to try, after trying to flash 27 firmwares maybe i missing something?
i stayed up all night for this.
any help will be welcomed.
same issue
i can get the newest firmware to flash with odin 3.14 but same issue. only description difference is it seems to freeze then reboot. i have seen it progress a little further with reboots (over time) all the way to the setup screen then freeze and reboot or freeze altogether. been at this for like a week now. driving me nuts please help!! i think im going to try the s7 edge firmware see what that does.
Same exact issue. Hope someone has a solution.
Just have to say. Know the frustration. I have done the same thing with a dozen firmwares. Not as many as you and can not find the answer. If I do i will let you know.
One thing
So I finally got this file to work and pass G930VVRS9CSB1_G930VVZW9CSB1_VZW in odin 3.13. It's still rebooting though. Argh.
Hello everyone, today i wanted to try the new lineage rom for android 9 on my SM-G900M
But while i was backuping my files, i had a problem with WhatsApp, it was basically filling my entire internal memory space, so i had to move this for external sd card to be able to create and upload the backup file to Google Drive.
So i rooted my phone and installed Foldermount, created the link and it was moving my whatsapp files and when it was 16% of the progress bar, my cellphone just rebooted and didn't get back to the OS on the normal time it used to, i had a very long loading screen and when i finally could access my phone it worked for 10~20secs only and rebooted again.
I've tried to hard reset but when i bootup the phone, i have the green screen of reset and when it hits the last stage, the "installing apps" one, and the installing apps bar get near the end, the cellphone just restart like before and get into a very long loading screen.
When i try to upload a rom from Sammobile i got stuck on <ID:0/004> aboot.mbn
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
And when i try to upload a full repair rom with " BL / AP / CP / CSC " i got stuck in <ID:0/004> DO NOT TURN OFF TARGET!! (With Set Partition)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
Any one could help me getting my S5 back to life? :/
Thx if you spent your time reading this all <3
I'm not sure about what i've done to solve this but i could upload the room after changing Cabble/usbport and Ignoring CSC, useing PIT and flaging NAND ERASE on ODIN 3.13.1