Hello everyone, today i wanted to try the new lineage rom for android 9 on my SM-G900M
But while i was backuping my files, i had a problem with WhatsApp, it was basically filling my entire internal memory space, so i had to move this for external sd card to be able to create and upload the backup file to Google Drive.
So i rooted my phone and installed Foldermount, created the link and it was moving my whatsapp files and when it was 16% of the progress bar, my cellphone just rebooted and didn't get back to the OS on the normal time it used to, i had a very long loading screen and when i finally could access my phone it worked for 10~20secs only and rebooted again.
I've tried to hard reset but when i bootup the phone, i have the green screen of reset and when it hits the last stage, the "installing apps" one, and the installing apps bar get near the end, the cellphone just restart like before and get into a very long loading screen.
When i try to upload a rom from Sammobile i got stuck on <ID:0/004> aboot.mbn
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
And when i try to upload a full repair rom with " BL / AP / CP / CSC " i got stuck in <ID:0/004> DO NOT TURN OFF TARGET!! (With Set Partition)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
Any one could help me getting my S5 back to life? :/
Thx if you spent your time reading this all <3
I'm not sure about what i've done to solve this but i could upload the room after changing Cabble/usbport and Ignoring CSC, useing PIT and flaging NAND ERASE on ODIN 3.13.1
Related
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
that happened twice while trying to flash stock nougat firmware after some buggy custom roms.
smart switch from samsung for drivers on windows 10 installed, com 4 connected, whenever i try to flash the 4 parted firmware (cl, bl, ap,csc) it gives me a fail after some time with log above.
thanks for any help how to get back to stock
device wants me to use emergency recovery from smart switch but end of month small bandwith left i would have liked to prevent downloading another 4gb through smart switch as i have the nougat stock files on hdd.
thanks!
Alright so I am trying to convert my sprint phone to work on tmobile my phone was upgraded to 7.0 so I downloaded SM-G935TUVS4QB1 software to flash it to tmobile, however I get SW REV CHECK FAIL : {aboot]Fused 5 > Binary 4. I am using Odin 3.12 and I see this error a lot with people trying to downgrade, but the phone is on 7.0. This is a copy of the odin log any help is appreciated.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
LeeFerio said:
Alright so I am trying to convert my sprint phone to work on tmobile my phone was upgraded to 7.0 so I downloaded SM-G935TUVS4QB1 software to flash it to tmobile, however I get SW REV CHECK FAIL : {aboot]Fused 5 > Binary 4. I am using Odin 3.12 and I see this error a lot with people trying to downgrade, but the phone is on 7.0. This is a copy of the odin log any help is appreciated.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It looks like you are trying to flash a firmware with bootloader version 4 over version 5. look at the 5th digit from the right in the firmware version and thats the bootloader version. Im afraid you are stuck on the Sprint firmware because tmobile versions are all bootloader 4 and you cant downgrade bootloader versions.
bsharp8 said:
It looks like you are trying to flash a firmware with bootloader version 4 over version 5. look at the 5th digit from the right in the firmware version and thats the bootloader version. Im afraid you are stuck on the Sprint firmware because tmobile versions are all bootloader 4 and you cant downgrade bootloader versions.
Click to expand...
Click to collapse
Interesting that makes sense. Thank you for the response I appreciate that.
No problem
Hey guys,
Im trying to flash stock rom using odin.
Fail at the system img
YES that is firmware for my model
I dont have frp lock
I rooted my phone,
Installed this rom,
rom worked,
tried to root because i have tripped knox and i want to change build prop for samsung s health,
installed twrp,
rebooted,
data werification failed,
trying flash rom for stock,
and this error
odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> modem_debug.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I siting on this 2 hours. Pls help
Solved:
Checked the update bootloader box in options
I have s7 SM-G930F on running 6.0.1 masmellow..
Now I want to update to Oreo or nugget..
So I downloaded the oreo zip file from sammobile.and odin.. then I flash ... it's fail odin say "re partion operation fail "
Then I try to flash nougat but fails same.
Then I try with masmellow but it fail again same issue..
Then I try to install TWRP it's fail ..
Try to root with CF auto root but fail...
Drivers OK
Correct file I'm sure..cables ok...
(I flash before s2 s3 s4 s5 s6 s7edge root/costume rom)
Plzzzzz help me gyz ...
I installed twrp, it worked fine other than data mount thing, tried to reinstall twrp but doing something different to try and get around the data mount, still no data mount, but twrp installed fine and my phone booted like normal except nothing from google would work, couldn't even add an account, it would just go to a black screen
So tried wiping dalvik and cache (found the data mount fix) that didnt work so figured at least try and flash a new rom as it seems to be an issue with my rom, well I tried flashing a rom, it said it installed correctly in the set up but then it sat for over 10 minutes on the black samsung galaxy s8 screen
So figuring it wasnt working I decided to try and flash stock rom, I downloaded it, followed the Odin guide, do I only need to flash the AP file?
This is Odin's log
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img.lz4
And it just sits there, right now at 20+ minutes, no indication that anything is being done on phone of within odin
Any help you can offer?
Im on latest 2CRED May firmware and downloaded the right file for that from updato (sammobile is too slow to wait on those downloads)
Should I just suck it up and download from sammobile?
Thanks
Well I figured I needed to flash all four things and that seems to have helped some, but now its stuck at Set Partition
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin.lz4
NVM Im an idiot, I wasnt on the most recent odin
Hello guys.
So yesterday i tried to root my chinese qualcomm variant of s7 edge with the help of this site https://www.the***********.com/root-qualcomm-galaxy-s7-edge-nougat/ ..
I enabled usb debugging, enabled oem unlock, unlocked bootloader with the help of the link i found in xda ,set up samsung drivers and adb in my pc and proceeded with the steps mentioned..
i flashed the .tar file and it did succeed but after it rebooted i got stuck in the samsung logo
... it showed warranty bit : kernel on the top left
After that i panicked and searched up xda and stubled upon this thread https://forum.xda-developers.com/s7-edge/help/s7edge-g9350-qualcomm-english-hk-rom-t3429535
I did all the mentioned steps but it showed failed in odin
then i tried to install https://www.teamandroid.com/2018/07...0-china-galaxy-s7-edge-g9350-oreo-firmware/2/ but to no avail
after this i got this in odin
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4948 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
....
And now it is stuck in a boot loop i can only access the download mode.. i cannot go to recovery mode at all
every time i press the power button or try to go to recovery mode it says recovery booting , set warranty: recovery and then disappears within a second
Is my device hard bricked ? Please help me I really dont know what to do next .. thanks in advance
DOES UR ISSUE RESOLVED