samsung galaxy s4 in soft brick impossible to flash with odin - Galaxy S 4 Q&A, Help & Troubleshooting

hi everybody,
i changed my cyanogenmod 11 in samy deluxe, ilost my imei so to restore iti tried to flash stockbut someting gone wrong. im now in soft brick, i tried toflash again but thats the error:
Code:
[CODE]<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
[/CODE]
i attach whats happen in my phone, i really don't what to do... pease help me....
p.s. i used odin v. 3.04 and 3.07 with the same result, mydevice is gs4 i9505

If you are on the new bootloader you cannot flash those ancient firmwares. You need one based on 4.4.2.
- Different usb port
- Run as admin
- Different usb cable
or just flash the custom recovery and flash a custom rom that you want.

Lennyz1988 said:
If you are on the new bootloader you cannot flash those ancient firmwares. You need one based on 4.4.2.
- Different usb port
- Run as admin
- Different usb cable
or just flash the custom recovery and flash a custom rom that you want.
Click to expand...
Click to collapse
i have to install stock because i dont have efs file....... ive tried what you said..... now i downloaded from sammobile thelatest firmware but i don't know if it will work....
is there a writing protection? is that a problem?

Trinity94 said:
i have to install stock because i dont have efs file....... ive tried what you said..... now i downloaded from sammobile thelatest firmware but i don't know if it will work....
is there a writing protection? is that a problem?
Click to expand...
Click to collapse
No.

i tried to flash autoroot and it works!!!! now i have to restore imei... if i flash stock rom imei will be restored automatically???

Related

[Q] Cricket sasmung s4 bricked HELP!!

Alright so I bricked my s4 while rooting it, It says something happened when updating the firmware, I did what people said use odin and flash to stock but i keep getting the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R970CVVUFNC6_R970CCRIFNC6_R970CVVUFNC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
If anyone could help that would be great!
arkk431 said:
Alright so I bricked my s4 while rooting it, It says something happened when updating the firmware, I did what people said use odin and flash to stock but i keep getting the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R970CVVUFNC6_R970CCRIFNC6_R970CVVUFNC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
If anyone could help that would be great!
Click to expand...
Click to collapse
Hi,
What stock you had and what stock rom are you trying to flash?
also check this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Its the stock file for the cricket schr970c and that threads for model specific only.
arkk431 said:
Its the stock file for the cricket schr970c and that threads for model specific only.
Click to expand...
Click to collapse
Sorry mate
i did not realice you had an S4 cricket , the thread i gave you is not for your device..

SGH-i337M Virgin Mobile

1. Rooted via Towelroot on 4.3, then when new OTA update came up i just clicked on install and it went through fine, another update came up 4.4.2 and i clicked on update went through fine, now 5.0.1 came out when i clicked on update went through up to 28% and then said failed,
Now stuck on Firmware having issue connect to Kies which i did but indicated failed
Then i connected via Odin,
Files i got was ( MF3 TARs )
Placed the phone on downloading mode
Tried didn't go through asking for PIT so i found a file loaded
still no go
Log from Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

My phone doesnt boot

I recently flashed my phone with odin, but now when i try to turn it on, it just turns a brighter grey colour and stays like that.
Is there a way to stop this?
Edit: I think i flashed the wrong firmware, Does anyone know any advice on how to get my phone to work?
Can you go Download Mode? if not try switching new batteries, mostly deadboot problems 'cause by battery
I can go into download mode but when i try to do another odin flash it says this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5360_XXMI1.tar.md5 is valid.
<OSM> MODEM_S5360_XXMG1.tar.md5 is valid.
<OSM> CSC_S5360_XEUMI1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
try downloading another firmware your region's and make sure the USB cord is fine
when you've extracted the firmware package...
CSC_S5360_XEUMI1.tar.md5 is different from others...

[Help] Soft brick, cant flash recovery

Hi, i am having trouble getting rid off a soft brick,samsung galaxy I-19500, the phone had samsung factory 5.0.1 lollipop firmware. I tried rooting it by flashing CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 that file, i got the <ID:0/006> Complete(Write) operation failed. error and when i tried to boot it up normaly it was bricked, (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again).
i tried falshing a recovery but it wont get through that same error.
Tried several times and this is the odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
The recovery i am trying to flash is TWRP_3.0.2.0_ks01lte_20160508.tar.md5.
Thanks a lot.
blackyto1995 said:
Hi, i am having trouble getting rid off a soft brick,samsung galaxy I-19500, the phone had samsung factory 5.0.1 lollipop firmware. I tried rooting it by flashing CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 that file, i got the <ID:0/006> Complete(Write) operation failed. error and when i tried to boot it up normaly it was bricked, (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again).
i tried falshing a recovery but it wont get through that same error.
Tried several times and this is the odin log:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP_3.0.2.0_ks01lte_20160508.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Can't open the serial(COM) port.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
The recovery i am trying to flash is TWRP_3.0.2.0_ks01lte_20160508.tar.md5.
Thanks a lot.
Click to expand...
Click to collapse
You are flashing the wrong files. The root file was for the GT-I9505 and the recovery for the GT-I9506. You have a GT-I9500, which is completely different. Try flashing files for the GT-I9500.
GDReaper said:
You are flashing the wrong files. The root file was for the GT-I9505 and the recovery for the GT-I9506. You have a GT-I9500, which is completely different. Try flashing files for the GT-I9500.
Click to expand...
Click to collapse
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
blackyto1995 said:
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
Click to expand...
Click to collapse
Oh, hai!
blackyto1995 said:
Yeah, thats what soft bricked my phone, i though the other recovery that i was trying to install was for i-9500 , i have flashed an stock lollipop rom and debricked it finally. Thanks for making me realise i am quite stupid..
if you can redirect me to a post with a good recovery for my phone it would be nice, since i am having trouble finding one.
thanks again.
Click to expand...
Click to collapse
GearCM Recovery
Unofficial TWRP 3.0.2-1
Sent from my ASUS_Z00A using XDA Labs

ODIN flash failed on Samsung Note 5 SM-N920I

Hi. Recently i've updated my Note 5 to Nougat and trying to root my phone. At first when i flashed TWRP is successful.
But after that my phone just bootloops endlessly. I tried flashing back to the stock but my device says SYSTEM REV. CHECK FAIL. DEVICE:1 BINARY: 0
please help me as im in need of my phone and all my important datas is inside my device :crying::crying::crying:
and here i include odin log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

Categories

Resources