Hi! I tried rooting my phone after a few reading online.
Basically the instruction is to press power,volume and main button to get to download mode, and press volume up to see the android logo.
Then open Odin, connect phone to computer via USB. Load the Root file via the PDA section. Click start.
The only options ticked are Auto Reboot, and F.Reset Time.
The instruction said click start then let the system go then the phone will restart when finished. But Odin shows it failed.
Im sure the root file downloaded is for my phone model I double checked with different sources.
What should I do? Is my phone bricked now?
I havent disconnected anything and Odin is still running. HELP!
This is what is showing in ODIN
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-h3gduosctc-smn9009.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope someone can help me ASAP I dont wanna get my phone bricked
Related
Okay so my S4 was just fine until an update broke the wifi usage. I tried doing what I was told would probably help by trying to flash it back to how it was, but that didn't work, and I ended up with a warning message each time I power on my S4 "System Software not authorized by Samsung has been found on your phone."
It won't boot past this, and when powered off, and plugged into my computer it constantly vibrates, on and off.
I've tried flashing the Sprint Stock S4 rom, but that only leaves me with a failure message in Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope you guys can help me.
Gentooman said:
Okay so my S4 was just fine until an update broke the wifi usage. I tried doing what I was told would probably help by trying to flash it back to how it was, but that didn't work, and I ended up with a warning message each time I power on my S4 "System Software not authorized by Samsung has been found on your phone."
It won't boot past this, and when powered off, and plugged into my computer it constantly vibrates, on and off.
I've tried flashing the Sprint Stock S4 rom, but that only leaves me with a failure message in Odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMDC_L720SPTAMDC_L720VPUAMDC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope you guys can help me.
Click to expand...
Click to collapse
Try KIES recovery mode
my phone is bricked, it will not flash stock rom via odin, i asked on the main forum what the log meant, i was told i needed a pit file, so i got one, and tried again, but it still fails, so here is the log, please tell me what to do.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Try Adding the pit file+the stock rom in odin and flash them together, and see if that works
did you do the download mode
Power off phone
Press and hold Home + Volume down + Power on button
Press volume up to confirm and enter download mode
i did flash the pit and stock rom together in odin, and then tried separately, and yes of course i was in download mode!!!
still no good though...
Kobro said:
i did flash the pit and stock rom together in odin, and then tried separately, and yes of course i was in download mode!!!
still no good though...
Click to expand...
Click to collapse
Try to connect mobile using SS port. i.e. the USB port with different colour in a laptop. It is also known as US 3.0 port!
Kobro said:
my phone is bricked, it will not flash stock rom via odin, i asked on the main forum what the log meant, i was told i needed a pit file, so i got one, and tried again, but it still fails, so here is the log, please tell me what to do.
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It failed because you have not split the firmware first - Galaxy y does not support single file flashing
You need to split the firmware into pda modem and csc - You can do this by using splitfus2 link in my signature
However I have already split pretty much all available firmware which you can find on my firmware thread - http://forum.xda-developers.com/showthread.php?t=2568853
The one that you want based on what your odin log says will be
http://d-h.st/hOn
So before all of this, my Sprint S4 was rooted but I don't think I installed a recovery on it as before this ****storm happened, trying to boot into a recovery didn't work, so I'm assuming I never installed one. So long story short, I was trying to install Cyanongenmod using their installer, wouldn't work after a few times and now my phone is stuck in the "firmware upgrade encountered an issue" and I can only boot into download mode, can't do anything else and I've tried using Kies recovery thing and nothing works. I've tried flashing new firmware in odin, everything I've tried always fails, gets stuck at "setup connection" a lot, tried different USB ports, cords, literally everything a few Google searches give me and I just cannot get this thing unbricked, and I'm just shocked why everything I tried to flash on it in odin just keeps failing.
I really, really need help from you guys as I need my phone for work and don't have any backup phones or anything, so I would appreciate 100% if someone can get me out this ****, thank you!
Also usually get this error in odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUFNAE_L720SPTFNAE_L720VPUFNAE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Hi! Today I tried to flash the official LP ROM from i9506 Lolipop Official Samsung firmware 5.0.1 by mar10o, but ODIN froze, and gave the output at the end. Now my phone is hard-bricked. Battery is at 70-80%, but it won't start at all. I have no Download Mode nor Recovery. I need help, or at least guidance of what I could do next. I've searched for hours but I haven't found a viable method to reflash the phone., or at least have it do anything at all. I already know that I'm srewed, but maybe someone know how to connect to the phone somehow.
Thanks for your time!
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUDOD3_I9506NEEDOD4_I9506XXUDOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
How can it be hard bricked? As far as I can see, it didn't even flash anything.
Try booting in download mode with battery out and connected to charger.
Try booting in download mode with battery out and connected to charger and putting the battery back in.
Alexmontboik said:
Hi! Today I tried to flash the official LP ROM from i9506 Lolipop Official Samsung firmware 5.0.1 by mar10o, but ODIN froze, and gave the output at the end. Now my phone is hard-bricked. Battery is at 70-80%, but it won't start at all. I have no Download Mode nor Recovery. I need help, or at least guidance of what I could do next. I've searched for hours but I haven't found a viable method to reflash the phone., or at least have it do anything at all. I already know that I'm srewed, but maybe someone know how to connect to the phone somehow.
Thanks for your time!
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUDOD3_I9506NEEDOD4_I9506XXUDOD3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Hi,
Based on the ODIN log that you post, the installation interrupted because you accidentally remove your phone from your computer during initialization (if you don't do it so, might be bad USB cable). As all files are removed, you'll find yourself on a dead phone (in other words, Hard Bricked). The only way is to go to nearest Samsung Service Center, unfortunately.
I was updating my samsung galaxy grand prime duos (SM-G531H) with kies, not knowing my cable was broken while the updating the phone disconnected and i ended up with a screen saying "firmware upgrade encountered an issue. please select recovery mode in kies and try again" i changed the cable and decided to flash the update with odin... process went through and the phone booted up normal with the new update installed... now i decided to factory reset so i went into the stock recovery and did but it came up with a bunch of errors which i didn't take note of... i flashed twrp and repaired the file system, wiped system and then i flashed the the firmware together with the pit file on odin once more... the phone booted up normal and i was using it and eveything when i put it to charge and came back 10 mins later the phone was off.... when i powered it on it just stays on the "samsung galaxy grand prime" screen and doesn't boot... it doesn't go into recovery anymore it just hangs whe're it says "recovery is not seandroid enforcing" i tried flashing the firmware with odin again but every single time i tried it keeps failing at...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Removed!!
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried the repair firmware together with the pit file and it gets stuck at
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
it's been like that for over an hour now... any help would be much appreciated guys.
No
Try with orignal firmware
nihu.46 said:
Try with orignal firmware
Click to expand...
Click to collapse
I tried everything and nothing seems to work
I also get this problem. Does anyone know how to fix it?
Ghettovybz said:
I tried everything and nothing seems to work
Click to expand...
Click to collapse
Remove kies. Reinstall samsung drivers.
Find and flash TWRP 3.0.0 with odin ( on recovery is not SEAndroid enforcing hold volume up and home for 5-10 seconds. Also flash the Custom Kernel by eyeless95 on the forum, its sepermissive.
u0aol said:
Remove kies. Reinstall samsung drivers.
Find and flash TWRP 3.0.0 with odin ( on recovery is not SEAndroid enforcing hold volume up and home for 5-10 seconds. Also flash the Custom Kernel by eyeless95 on the forum, its sepermissive.
Click to expand...
Click to collapse
What about for SM-G530H?
Do u have the link for the kernel?
After installing kernel what should I do then?
Two ways. Find stock rom in Sammobile and install via Odin (newest). Or try once again install it via Kies. You sould can restore it with Kies, but dont plug phone to computer. Write down S/N or something like that (it's under battery) and model, and Kies will download system
argounaut said:
What about for SM-G530H?
Do u have the link for the kernel?
After installing kernel what should I do then?
Click to expand...
Click to collapse
I have a g531h so I'm not sure. I'm below ten posts so i cant post links.
There are kernels and recoverys in the development section that work fine for your phone .