Related
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!
bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki
Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,
install a wrong rom or bad now pc cant find it and screen stay on white i still can go to the boot screen
T-mobile Mda Thanks
TheGreatRudy said:
install a wrong rom or bad now pc cant find it and screen stay on white i still can go to the boot screen
T-mobile Mda Thanks
Click to expand...
Click to collapse
Hard-Reset the device or if that don't work try to get into bootloader and flash it again.
Hello
I have a Magic phone. Is broken.
If you can help Thanks.
howdy explain what you have done to get to that stage and what is wrong with your device???
then i can go ahead and help you in your situation
Thanks.
Me if I am not wrong ROM instead, tried to radio.
mak132 said:
Thanks.
Me if I am not wrong ROM instead, tried to radio.
Click to expand...
Click to collapse
You need to try and explain it more clearly.. I barely understand what you're saying.
From that, all I get is that you've tried to change the radio?
You also have to be more specific, explain all the details. With the information you've given, no one.. even god himself could not help you with this
Sorry. english My language is not good.
My files to the wrong radio recovery menu instead tried to Ram.
After the phone to reset this picture appears, and no other buttons will not work.
Several are now clear of the open is the same.
Iran's android system where I did not open. Represent both the htc phone do not guarantee
mak132 said:
Sorry. Anglysm My language is not good.
My files to the wrong radio recovery menu instead tried to Ram.
After the phone to reset this picture appears, and no other buttons will not work.
Several are now clear of the open is the same.
Iran's Ndrvyd system where I did not open. Represent both the htc phone do not guarantee
Click to expand...
Click to collapse
Uh.....i think you need to wipe your sd card and then try loading the rom again. Whats your native language?
If you can't boot into fastboot (holding back+power), recovery (home+power) or hboot (volume down+power) and your phone is not recognized when connected to the PC then there isn't anything you can do, unfortunately. Can you get into one of these modes?
you have to download the android sdk
and boot the phone witch a recovery image over USB (witch the fastboot.exe)
maybe you should look at the "Non-TMobile 32B Magics" guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
KingSkeme said:
Uh.....i think you need to wipe your sd card and then try loading the rom again. Whats your native language?
Click to expand...
Click to collapse
Thanks.
My native language is Persian.
I also deleted sd card still not done.
swissp said:
If you can't boot into fastboot (holding back+power), recovery (home+power) or hboot (volume down+power) and your phone is not recognized when connected to the PC then there isn't anything you can do, unfortunately. Can you get into one of these modes?
Click to expand...
Click to collapse
Thanks.
No
I do Nmydh any action.
Placed only on the photo does not do any
tactic3 said:
you have to download the android sdk
and boot the phone witch a recovery image over USB (witch the fastboot.exe)
maybe you should look at the "Non-TMobile 32B Magics" guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
Click to expand...
Click to collapse
Thanks
Do not understand.
My phone is htc 32a.
If I am not wrong phone so you can flash.
Nokia phones such as the Flash will return to factory settings
I just occur the problem just like as minhanh_tran have happened.
when I flash a Orange ROM to my T01A, it entered white screen and began downloading, and when it finished it give a messege that the phone will restart automatically.
all this looks like boot right,but after restart the screen is blue screen,that mean I can see the backlight is open,but the screen have nothing,without the docomo logo or toshiba logo.....
when I try the method as minhanh_tran and stepw said, I push out the microSD,and short the pin 1 and 3,connecting the usb to my pc, then the PC find a new hardware, hinting that I enter DL mode and I should give TG01 DL driver.....so,what should I do?
bird_9527 said:
I just occur the problem just like as minhanh_tran have happened.
when I flash a Orange ROM to my T01A, it entered white screen and began downloading, and when it finished it give a messege that the phone will restart automatically.
all this looks like boot right,but after restart the screen is blue screen,that mean I can see the backlight is open,but the screen have nothing,without the docomo logo or toshiba logo.....
when I try the method as minhanh_tran and stepw said, I push out the microSD,and short the pin 1 and 3,connecting the usb to my pc, then the PC find a new hardware, hinting that I enter DL mode and I should give TG01 DL driver.....so,what should I do?
Click to expand...
Click to collapse
Mmmm, did you try to flash a rom by pin recovery method?
arag0n85 said:
Mmmm, did you try to flash a rom by pin recovery method?
Click to expand...
Click to collapse
yep，I have try using this method.
and I can enter the downloading screen and can finish downloading,and then the screen give the right messege"flash successful , the phone will restart automatically".......but after restart, the phone is still back screen, I can not see the toshiba or docomo logo...
bird_9527 said:
I push out the microSD,and short the pin 1 and 3
Click to expand...
Click to collapse
You should NOT remove micro SD...
You need to put your official Rom on the micro SD and then short the pins...
bird_9527 said:
yep,I have try using this method.
and I can enter the downloading screen and can finish downloading,and then the screen give the right messege"flash successful , the phone will restart automatically".......but after restart, the phone is still back screen, I can not see the toshiba or docomo logo...
Click to expand...
Click to collapse
Did you try with a diferent ROM?
right
arag0n85 said:
Did you try with a diferent ROM?
Click to expand...
Click to collapse
I have tried all kinds of ROM, including ORANGE\GERMEN\DOCOMO official ROM,all this can download to my t01a, but after restart, the screen is still black and can not enter the docomo or toshiba logo and can not open....
bird_9527 said:
I have tried all kinds of ROM, including ORANGE\GERMEN\DOCOMO official ROM,all this can download to my t01a, but after restart, the screen is still black and can not enter the docomo or toshiba logo and can not open....
Click to expand...
Click to collapse
Rare thing... but if you can flash properly a DOCOMO ROM, i would recommend you to use the "toshiba service", they don't have a way to know if that happened while you were updating your rom or flashing a custom ROM. Anyways, I don't know what should be happening, you should try to use .enc extension in your DOCOMO original ROM just to try.
arag0n85 said:
Rare thing... but if you can flash properly a DOCOMO ROM, i would recommend you to use the "toshiba service", they don't have a way to know if that happened while you were updating your rom or flashing a custom ROM. Anyways, I don't know what should be happening, you should try to use .enc extension in your DOCOMO original ROM just to try.
Click to expand...
Click to collapse
I have tried many ROM, by all the way (pin 1+3, change ROM file to *.enc, bin...) but after ROM have flashed successfully, it restarts and nothing more, only backlight.
yep
minhanh_tran said:
I have tried many ROM, by all the way (pin 1+3, change ROM file to *.enc, bin...) but after ROM have flashed successfully, it restarts and nothing more, only backlight.
Click to expand...
Click to collapse
my t01a just like as your condition......waiting for the solution tools......
congraturation!
i dont know whats wrong with my phone. i turn it on and boots to the sprint splash screen and goes back to the htc quetly brillian screen and stays there. tried flashing zen-hero_0.1b.zip and now im clueless sorry to be so noobish
anyone willing to help?
iforgot618 said:
i dont know whats wrong with my phone. i turn it on and boots to the sprint splash screen and goes back to the htc quetly brillian screen and stays there. tried flashing zen-hero_0.1b.zip and now im clueless sorry to be so noobish
anyone willing to help?
Click to expand...
Click to collapse
Go into recovery and wipe everything in the wipe menu. Then, flash a rom.