Hello
I have a Magic phone. Is broken.
If you can help Thanks.
howdy explain what you have done to get to that stage and what is wrong with your device???
then i can go ahead and help you in your situation
Thanks.
Me if I am not wrong ROM instead, tried to radio.
mak132 said:
Thanks.
Me if I am not wrong ROM instead, tried to radio.
Click to expand...
Click to collapse
You need to try and explain it more clearly.. I barely understand what you're saying.
From that, all I get is that you've tried to change the radio?
You also have to be more specific, explain all the details. With the information you've given, no one.. even god himself could not help you with this
Sorry. english My language is not good.
My files to the wrong radio recovery menu instead tried to Ram.
After the phone to reset this picture appears, and no other buttons will not work.
Several are now clear of the open is the same.
Iran's android system where I did not open. Represent both the htc phone do not guarantee
mak132 said:
Sorry. Anglysm My language is not good.
My files to the wrong radio recovery menu instead tried to Ram.
After the phone to reset this picture appears, and no other buttons will not work.
Several are now clear of the open is the same.
Iran's Ndrvyd system where I did not open. Represent both the htc phone do not guarantee
Click to expand...
Click to collapse
Uh.....i think you need to wipe your sd card and then try loading the rom again. Whats your native language?
If you can't boot into fastboot (holding back+power), recovery (home+power) or hboot (volume down+power) and your phone is not recognized when connected to the PC then there isn't anything you can do, unfortunately. Can you get into one of these modes?
you have to download the android sdk
and boot the phone witch a recovery image over USB (witch the fastboot.exe)
maybe you should look at the "Non-TMobile 32B Magics" guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
KingSkeme said:
Uh.....i think you need to wipe your sd card and then try loading the rom again. Whats your native language?
Click to expand...
Click to collapse
Thanks.
My native language is Persian.
I also deleted sd card still not done.
swissp said:
If you can't boot into fastboot (holding back+power), recovery (home+power) or hboot (volume down+power) and your phone is not recognized when connected to the PC then there isn't anything you can do, unfortunately. Can you get into one of these modes?
Click to expand...
Click to collapse
Thanks.
No
I do Nmydh any action.
Placed only on the photo does not do any
tactic3 said:
you have to download the android sdk
and boot the phone witch a recovery image over USB (witch the fastboot.exe)
maybe you should look at the "Non-TMobile 32B Magics" guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
Click to expand...
Click to collapse
Thanks
Do not understand.
My phone is htc 32a.
If I am not wrong phone so you can flash.
Nokia phones such as the Flash will return to factory settings
Related
Hi!
I have a HTC Magic from Vodafone, and i try to update the ROM but....it brick!
I have try the recovery, fast boot, and nothing!
On the screen just show a box with the arrow strait to the phone.
Any ideia?
Reggards,
Sorry my English, but 'im Portuguese.
xe_d-sono
you wont get an answer unless you tell us what exactly you tried to do
I've try to update the radio
xe_d_sono said:
I've try to update the radio
Click to expand...
Click to collapse
That's another story that updating the Rom. But give info about what radio you tried to update it with. Give as much info as possible and it will be easier to try to help
I cant remenber what radio i have try, but there is no general recovery way?
Thanks
try things like take battery out for 10 sec plug usb cable in to phone and pc while pressing back button put battery back in
I try that but no luck...it don´t start
generally a brick caused by flashing the radio is a one way ticket
OMG, and now? There must be a way to enter in JTAG mode, like Tynt.
But in this time i thing it is too earlly...
Are you able to use ADB while stuck on that screen?
Press Home + Power to see if you can bring up the HTC recovery console.
press power and home,if you see a box with the arrow, press power and home again, maybe you can into recovery.
bradyonly said:
Are you able to use ADB while stuck on that screen?
Click to expand...
Click to collapse
If you are a bit lucky with your spl, you can use ADB to put in recovery again.
Hello!
my G1 does not boot...
i flash wrong hboot...
help me please boot thise device...
You can repair the bootloader by jtag tool like Omnia Repair Tool (ORT).
ohfar said:
You can repair the bootloader by jtag tool like Omnia Repair Tool (ORT).
Click to expand...
Click to collapse
thank you, but it is device cost more then my g1
may be service centre have Repair Tool...
any posible do not work?
rasperepodvipodvert said:
Hello!
my G1 does not boot...
i flash wrong hboot...
help me please boot thise device...
Click to expand...
Click to collapse
more details please? What exactly did you do? It's hard for anyone to help you without sufficient information.
cg87 said:
more details please? What exactly did you do? It's hard for anyone to help you without sufficient information.
Click to expand...
Click to collapse
i flash this file "update-hboot-1762007-signed.zip" from recovery-RA-dream-v1.6.2
and reboot my G1, then G1 dead
update-hboot-1762007-signed.zip - is HTC Magic hboot ...
View attachment update-hboot-1762007-signed.zip
red lights when usb cable connect to PC....
i don't belive that kill boot program it is possible.... why g1 has no button for hard reset
If the SPL is screwed its screwed.
Enjoy your new paperweight.
vixsandlee said:
If the SPL is screwed its screwed.
Enjoy your new paperweight.
Click to expand...
Click to collapse
but power lights is on when i attached G1 to PC.
i want boot from SD card... make GOLD CARD and boot... it is may be help me?
rasperepodvipodvert said:
i flash this file "update-hboot-1762007-signed.zip" from recovery-RA-dream-v1.6.2
and reboot my G1, then G1 dead
update-hboot-1762007-signed.zip - is HTC Magic hboot ...
View attachment 293642
red lights when usb cable connect to PC....
i don't belive that kill boot program it is possible.... why g1 has no button for hard reset
Click to expand...
Click to collapse
Why did you flash a Magic SPL on your G1 which is a Dream?
Reading is a lost art. Only excuse he has is that English isn't his first language.
so will it not boot at all?
have you tried to boot into recovery mode?
i would try booting into recovery mode. if you are able to, then you may be able to save the correct file onto the sd card using your computer, then putting it back into the phone, then doing the recovery mode. using the command prompt to flash the boot image.
cg87 said:
Why did you flash a Magic SPL on your G1 which is a Dream?
Click to expand...
Click to collapse
because i noob
jakijal said:
so will it not boot at all?
have you tried to boot into recovery mode?
i would try booting into recovery mode. if you are able to, then you may be able to save the correct file onto the sd card using your computer, then putting it back into the phone, then doing the recovery mode. using the command prompt to flash the boot image.
Click to expand...
Click to collapse
i don't boot into recovery mode... SPL is wrong...
When i press HOME+POWER don't enithing...
When i press POWER+BACK - lights(diod) is of...
I have recovery boot on this device (G1), but i didn't because don'n boot into recovery mode....((((((
I'll make this really easy.
If Home + Power doesn't work
If Camera + Power doesn't work
You need a new phone.
I may eat those words. It appears some people have tried this and reported it working:
http://forum.xda-developers.com/showthread.php?t=571457
r4d14n7 said:
I may eat those words. It appears some people have tried this and reported it working:
http://forum.xda-developers.com/showthread.php?t=571457
Click to expand...
Click to collapse
It's very rare that works..
However.. the JTAG thread has finally born some fruit: the first successful unbrick!
http://forum.xda-developers.com/showpost.php?p=5911627&postcount=302
Hi all,
my HTC is broken as the vol down hardware button is not working. I was arguing is there's some way to enter bootloader without it. Please also note that I'm unable to start Windows Mobile as the phone is formatted.
Thank you !!
Seems no way ?
Il_Pres said:
Seems no way ?
Click to expand...
Click to collapse
does your phone boot?
an easy way to get there is to start flashing a rom it will kick you to the boot loader ...
But there are some endkey replacements that have the option to restart in the boot loader ...
watcher64 said:
does your phone boot?
an easy way to get there is to start flashing a rom it will kick you to the boot loader ...
But there are some endkey replacements that have the option to restart in the boot loader ...
Click to expand...
Click to collapse
Hi,
thank you for your reply. Unfortunately the phone has been Task 29 Formatted so it's unable to boot to OS. These "End key Replacement" sounds good. What are they ment for?
I've disassembled the phone and found out that the flex cable of VOL Keys is broken. So NO VOL DOWN. Just ordered a new flex cable from China, but it will take ages to get to Italy.
Any help much appreciated
Endkey replacement: http://forum.xda-developers.com/showthread.php?t=704631
Gaz Touch Tools
Using one of them you can go into bootloader mode.I prefer endkey.
Mike
Il_Pres said:
Hi,
thank you for your reply. Unfortunately the phone has been Task 29 Formatted so it's unable to boot to OS. These "End key Replacement" sounds good. What are they ment for?
I've disassembled the phone and found out that the flex cable of VOL Keys is broken. So NO VOL DOWN. Just ordered a new flex cable from China, but it will take ages to get to Italy.
Any help much appreciated
Click to expand...
Click to collapse
well your phone has to boot to use the endkey replacements ...
even if it was task29 if you run the rom installer it it should kick you into the boot loader, but I am not sure about that, does the PC detect the phone over usb, or you could flash from the SD card ...
watcher64 said:
well your phone has to boot to use the endkey replacements ...
even if it was task29 if you run the rom installer it it should kick you into the boot loader, but I am not sure about that, does the PC detect the phone over usb, or you could flash from the SD card ...
Click to expand...
Click to collapse
No USB detection... No Bootloader, No Reset, No OS.
I suppose that to flash from SD Card you need to get into the Bootloader, right?
Thanks (almost desperate)
Just Called HTC support... they say to leave the phone without battery for 2 hours and hope to spawn a hardware reset... will this work :/ ?
Waited 2 hours: NO JOY.
Anyone?
Il_Pres said:
Hi all,
my HTC is broken as the vol down hardware button is not working. I was arguing is there's some way to enter bootloader without it. Please also note that I'm unable to start Windows Mobile as the phone is formatted.
Thank you !!
Click to expand...
Click to collapse
Not sure if it will work or but have you tried an app like everyWAN remote support personal edition?
It basically connects to phone and gives you a view of it via your PC I know you can reboot from pc etc and changes key preferences so maybe you could change the down key config
maybe wont work if you have no OS though but worth a shot the app i use is from sparus-software.com
hope that will help
Il_Pres said:
No USB detection... No Bootloader, No Reset, No OS.
I suppose that to flash from SD Card you need to get into the Bootloader, right?
Thanks (almost desperate)
Click to expand...
Click to collapse
I do not believe you need to enter the bootloader to flash from the SD card, search the forum for it but , If I remember use a fat32 formated sd card, use a 4 gig if you have an extra one, the ones that come with the phone seem to be flakey when it comes to flashing ..., and if memory serves me put the nbh in the root of the card and name it leoimg.nbh
Hi Thank you for your suggestions... unfortunately it seems the only way to flash for SD is with bootloader... just tested
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume down and power on the phone and that should bring u into the bootscreen mode
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
Hi all
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
rikardo1979 said:
Try the HR (hard reset)
turn the phone off
press and hold volume up & down together and power up the phone same time
That should hard reset your phone
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
mariodna said:
Nothing... only load the magldr....
but the buttons are ok because i can move on the magldr menu
Click to expand...
Click to collapse
rikardo1979 said:
so than try this-
switch off the phone
take off the battery cover and find the red like small button under it. press and hold it for few seconds than try the first step again
Click to expand...
Click to collapse
:S Nothing....
not happened to anyone else?
my Hd2 is now a brick?
mariodna said:
not happened to anyone else?
my Hd2 is now a brick?
Click to expand...
Click to collapse
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
rikardo1979 said:
Than press and hold volume up and power on the phone and that should bring u into the bootscreen mode
Click to expand...
Click to collapse
as far as i remember it was the volume down button to get into booloader.
silverwind said:
How about reinstalling android all over again? Maybe that can solve the problem.
If you are willing to do it, just go into bootloader screen, flash task 29, flash Magldr 1.13, flash CWM (dependent on the partition lay out required by the relevant rom), and flash the ROM (Nandroid).
Good luck
Click to expand...
Click to collapse
I don´t understand all...do you say me taht install android again??¿ i tried...with recovery mode, DAF mode and data2ext4.... but nothing....
Are you sure you're just downloading ROM's and using the same Clockworl for all? All ROM's have different partition layout requirements for Clockwork. Check out the ROM thread and look for something about the Clockwork partition size. I usually just Ctrl Find then look for 'CWM'.
If that's not the case, you may be downloading ROM's which need an Ext3/4 partition on the SD card. Do you have an Ext partition?
Well you have the partition, so the only thong it could be, quite possibly is the wrong Clockwork size. As far as I know, I think there's an included file in the TyphooN thread that has a CWM inside it. Download it, flash it via the .daf file, then go back in to recovery and flash the TyphooN .zip again.
mariodna said:
Hello everyone,
First i´m spanish and...sorry for my english is some poor...
I had a hd2 with the Typhoon ROM set with the Recovery and magldr 1.13 ... after downloading a number of applications gave me an error, I continue to reset the screen to start drawing android stood in the midst of .... and would not go away ... I changed the rom and the way to a more current ... and I got to work with the installation ... But my surprise was when I can not install all the steps still doing well ...
I can´t do a tricolor screen, i don´t know why... and i tried with all types of roms... The first rom of Coutulla, Daf roms, Recovery roms...recovery roms and DAF roms stops when are loading and in the screen are the android or logos...
The roms don´t load...
Please, i really need help... i don´t know what else i can do... My hd2 is european and the operator is Movistar... i never had a problem... but now i are ****...
¿Is my hd2 bricked?
Thank you to help me and thanks for all the work you do
Click to expand...
Click to collapse
Reading other posts I see you have tried everything, so I suggest you go back to the start, i.e install a Win 6.5 rom from HTC using the SD card method which will erase everything on your phone(including HSPL) and revert your phone back to factory status..
and then try again, use a Android NAND rom which does not required any ext/data2sd/apps2sd partition by default and see where u get with it.
yeah, u right. its volume down my bad sorry
it was a long night for me
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
Here's the CWM file you should be flashing if you're using TyphooN.
http://www.multiupload.com/5VH6M9XM8B
No need to restore to factory ROM etc. as even a Task 29 would be more useful and easier.
Thank you very much when i arrive to my home i try the options that you tell me.
Thank you again
No problem-o.
Don't forget, if I helped, don't forget the 'Thanks' button.
Curry curry curry
greg17477 said:
as far as i remember it was the volume down button to get into booloader.
Click to expand...
Click to collapse
You're from India aren't you
rikardo1979 said:
yeah, u right. its volume down my bad sorry
it was a long night for me
Click to expand...
Click to collapse
as long as it was a good night, you are excused
ALL_XDA_MODS_R_C*NTS said:
You're from India aren't you
Click to expand...
Click to collapse
wrong, try again
Sorry i was working this days...
I think that i made good the partitions... but any romload compleate.... Recovery don´t run, when i install a DAF Rom the load stop in te first screen.....
And i can´t do the tricolor screen... the buttons are well...but the tricolor screen no....
Sorry could you try explain in better English? Maybe use a translator.
"flash type 0 power reason 1 bootup_w_pwr_key_pressed"
That's the only thing written on my htc hd mini screen now.
After rebooting in "4-colored-screen mode" and flashing original rom (DAN) up to 100% device reboots and same thing happens, but with a little change - "flash type 0 power reason 6 bootup_w_warm_reset". Last flashed working rom was android "sense", it started "freezing", after soft-reseting the device i saw this grey screen. Already tried flashing different roms, taking the battery out for a long period, booting with vol+\vol- buttons pressed. Task29 freezes at 0%. Nothing helped.
Any advice anybody?
PS: sorry for my cr*ppy English, hope everything written above is available for understanding.
Please some pictures or more informations about ROMs you used,
iPlasm said:
Please some pictures or more informations about ROMs you used,
Click to expand...
Click to collapse
at first, it was RUU_Photon_HTC_DAN_1.36.403.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe (original unmodified ROM, downloaded from shipped-roms)
then i switched to Gabanna's 21686, but it had some issues with gps in my case, so i went back to RUU_Photon_HTC_DAN_1.36.403.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe and decided to switch to Android - HTC Sense 3.5 Android 2.3.5 with Beats Audio. It worked fine for 2 days, even gps came back from dead.
Thank you, hope this will help solving my case.
I think you better post some pictures here...., what you said now it seem OK
iPlasm said:
I think you better post some pictures here...., what you said now it seem OK
Click to expand...
Click to collapse
umm... pictures of WHAT?
Pictures of your phone that what happens, take pictures on the screen phone while the problems appears...
iPlasm said:
Pictures of your phone that what happens, take pictures on the screen phone while the problems appears...
Click to expand...
Click to collapse
I haven't got a camera to take pictures, and my problem kills the ability to take screenshots.
Once again:
-grey screen
-red text "flash type 0 power reason 1"
-blue text "bootup_w_pwr_key_pressed"
That's all.
2bigfella said:
I haven't got a camera to take pictures, and my problem kills the ability to take screenshots.
Once again:
-grey screen
-red text "flash type 0 power reason 1"
-blue text "bootup_w_pwr_key_pressed"
That's all.
Click to expand...
Click to collapse
it's first time I hear this, I think... maybe try with another battery or plug USB to Computer on it?
/
it doesn't seem that you have tried android ROMs? right?
iPlasm said:
it's first time I hear this, I think... maybe try with another battery or plug USB to Computer on it?
/
it doesn't seem that you have tried android ROMs? right?
Click to expand...
Click to collapse
I've searched for another battery in local stores - no success. The price of new, brought from ebay etc. would be equal to price of used HD Mini, and i don't want to waste money on buying some low-class-chinese-piece-of-cr%p battery, politely called "replica".
Could you, please, rephrase that "plug-usb-to-computer-on-it", because i can't understand what you mean.
Wrong, last working ROM (before the problem started) was HTC Sense 3.5 Android 2.3.5 (flashed to NAND)
So you have tried Android Installing ?
"plug-usb-to-computer-on-it" Cable your HTC HD Mini Cable, connect to PC>Cable<HTC HD Mini. then try install CWM Recovery.
dear 2bigfella, I'm still not sure whatever you where just in WM6.5 or you had android after all that, what I understood now is your CWM hasn't been installed correctly. Pictures of your phone will help me to know the problem... don't you have at least a camera or bring your friends to take some pictures on it
iPlasm said:
So you have tried Android Installing ?
"plug-usb-to-computer-on-it" Cable your HTC HD Mini Cable, connect to PC>Cable<HTC HD Mini. then try install CWM Recovery.
dear 2bigfella, I'm still not sure whatever you where just in WM6.5 or you had android after all that, what I understood now is your CWM hasn't been installed correctly. Pictures of your phone will help me to know the problem... don't you have at least a camera or bring your friends to take some pictures on it
Click to expand...
Click to collapse
aaaaaand again (3rd time): last rom working on my phone was (before the problem started) HTC Sense 3.5 Android 2.3.5 (flashed to NAND)
googled cwm recovery - 1. htc hd mini isn't supported and 2.MY PHONE ISN'T WORKING! I can't install apps on it because the only two things i can see on it is a)grey screen, described above and b)bootloader (4-colored-screen mode)
Okay now it's better to know... (don't google for cwm, it's here already)
restart device, when you see HTC Bootscreen.. press and hold down Volume - down, until you're entered fastboot mode, be sure that your cable is connected to PC<>Photon, and begin install CWM from here (go to dev section xda photon)
iPlasm said:
Okay now it's better to know... (don't google for cwm, it's here already)
restart device, when you see HTC Bootscreen.. press and hold down Volume - down, until you're entered fastboot mode, be sure that your cable is connected to PC<>Photon, and begin install CWM from here (go to dev section xda photon)
Click to expand...
Click to collapse
could you please post a link for cwm?
CWM? it's here for example: http://forum.xda-developers.com/showthread.php?t=1756672
you should now find it
iPlasm said:
CWM? it's here for example: http://forum.xda-developers.com/showthread.php?t=1756672
you should now find it
Click to expand...
Click to collapse
didn't work... :crying: "waiting for device" and nothing happens
have you installed the abd driver to pc before install the cwm recovery ?
arliuivps said:
have you installed the abd driver to pc before install the cwm recovery ?
Click to expand...
Click to collapse
sure i did
Okay, then does the window of LK installing... did you see (Device founded) or Not founded?
Please give us some pictures of your phone or your windows, do something that we can help you faster..
iPlasm said:
Okay, then does the window of LK installing... did you see (Device founded) or Not founded?
Please give us some pictures of your phone or your windows, do something that we can help you faster..
Click to expand...
Click to collapse
Hi, I have the same problem, but when i get colored screen and conect to PC, win recognized it like Qualcomm CDMA Technologies MSM. I've installed Android ADB Interface. When I start start-photonic.bat it wait my device:crying:
Thanks for help, anyway, and sorry my english.
I can write anything on SDCard with another phone. Maybe it help for autorun.
vitvichy said:
Hi, I have the same problem, but when i get colored screen and conect to PC, win recognized it like Qualcomm CDMA Technologies MSM. I've installed Android ADB Interface. When I start start-photonic.bat it wait my device:crying:
Thanks for help, anyway, and sorry my english.
I can write anything on SDCard with another phone. Maybe it help for autorun.
Click to expand...
Click to collapse
-----
Problem solved.
I cleaned memory, did like schlund said in post#2 and #6 http://forum.xda-developers.com/showthread.php?t=1852522&highlight=task+29 and flashed WM from official site.