I just occur the problem just like as minhanh_tran have happened.
when I flash a Orange ROM to my T01A, it entered white screen and began downloading, and when it finished it give a messege that the phone will restart automatically.
all this looks like boot right,but after restart the screen is blue screen,that mean I can see the backlight is open,but the screen have nothing,without the docomo logo or toshiba logo.....
when I try the method as minhanh_tran and stepw said, I push out the microSD,and short the pin 1 and 3,connecting the usb to my pc, then the PC find a new hardware, hinting that I enter DL mode and I should give TG01 DL driver.....so,what should I do?
bird_9527 said:
I just occur the problem just like as minhanh_tran have happened.
when I flash a Orange ROM to my T01A, it entered white screen and began downloading, and when it finished it give a messege that the phone will restart automatically.
all this looks like boot right,but after restart the screen is blue screen,that mean I can see the backlight is open,but the screen have nothing,without the docomo logo or toshiba logo.....
when I try the method as minhanh_tran and stepw said, I push out the microSD,and short the pin 1 and 3,connecting the usb to my pc, then the PC find a new hardware, hinting that I enter DL mode and I should give TG01 DL driver.....so,what should I do?
Click to expand...
Click to collapse
Mmmm, did you try to flash a rom by pin recovery method?
arag0n85 said:
Mmmm, did you try to flash a rom by pin recovery method?
Click to expand...
Click to collapse
yep，I have try using this method.
and I can enter the downloading screen and can finish downloading,and then the screen give the right messege"flash successful , the phone will restart automatically".......but after restart, the phone is still back screen, I can not see the toshiba or docomo logo...
bird_9527 said:
I push out the microSD,and short the pin 1 and 3
Click to expand...
Click to collapse
You should NOT remove micro SD...
You need to put your official Rom on the micro SD and then short the pins...
bird_9527 said:
yep,I have try using this method.
and I can enter the downloading screen and can finish downloading,and then the screen give the right messege"flash successful , the phone will restart automatically".......but after restart, the phone is still back screen, I can not see the toshiba or docomo logo...
Click to expand...
Click to collapse
Did you try with a diferent ROM?
right
arag0n85 said:
Did you try with a diferent ROM?
Click to expand...
Click to collapse
I have tried all kinds of ROM, including ORANGE\GERMEN\DOCOMO official ROM,all this can download to my t01a, but after restart, the screen is still black and can not enter the docomo or toshiba logo and can not open....
bird_9527 said:
I have tried all kinds of ROM, including ORANGE\GERMEN\DOCOMO official ROM,all this can download to my t01a, but after restart, the screen is still black and can not enter the docomo or toshiba logo and can not open....
Click to expand...
Click to collapse
Rare thing... but if you can flash properly a DOCOMO ROM, i would recommend you to use the "toshiba service", they don't have a way to know if that happened while you were updating your rom or flashing a custom ROM. Anyways, I don't know what should be happening, you should try to use .enc extension in your DOCOMO original ROM just to try.
arag0n85 said:
Rare thing... but if you can flash properly a DOCOMO ROM, i would recommend you to use the "toshiba service", they don't have a way to know if that happened while you were updating your rom or flashing a custom ROM. Anyways, I don't know what should be happening, you should try to use .enc extension in your DOCOMO original ROM just to try.
Click to expand...
Click to collapse
I have tried many ROM, by all the way (pin 1+3, change ROM file to *.enc, bin...) but after ROM have flashed successfully, it restarts and nothing more, only backlight.
yep
minhanh_tran said:
I have tried many ROM, by all the way (pin 1+3, change ROM file to *.enc, bin...) but after ROM have flashed successfully, it restarts and nothing more, only backlight.
Click to expand...
Click to collapse
my t01a just like as your condition......waiting for the solution tools......
congraturation!
Related
anymore. :--(
Yesterday i^ve make a setup for the ext_rom but with a wrong update. It was been not for the Artemis..my fault.
Now i see only th et-mobile start screen and no more.
What can i do? Thanks in advance..
hmm, please flash your p3300 whith the original software with hope that it will be alive again. otherwise you can take an hardreset on your phone but i'm sure that there will not happened.
is your PDA an original fom HTC or from any other Provider?
it`s from t-mobile
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
dr.moppi said:
and a hardreset doesn`t work and it`s not successful.
How can i flash it again...how i get usb connection to do it?
Click to expand...
Click to collapse
hello there!. i have the same problem, did you manage to get a usb connection? i can't flash it...
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
arvind09 said:
Try to get it into bootloader ( Read the Artemis wiki as to how to get into bootloader) and if you are successful then try flashing it with the t-mobile stock rom.
Click to expand...
Click to collapse
Please tell me how can i get the t-mobile stock rom or can you give me the link, thanks
Shipped ROM's in English - http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
To get into bootloader - hold down the record/voice command button (top left along the side of the phone) and use the stylus to press the recessed reset button on the lower left side of the phone (same side as the other boutton you hold down) Keep holding the record button as you hit and release the reset button, you will eventually see a screen with color bars on it. At this point you will be able to get a USB connection, but not an active sync. Try to start the ROM file when the phone is in this state and connected to your computer.
What is the original language/carrier for your phone?
MDA Compact III stops in T-mobile logo screen
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Hi I have the same problem. I have the B&B3.7 and get stuck in the splash screen. I could enter to the bootloader mode and use some commands of the mtty.
I have my old rom, how may i load it to the pda? I have a SD and a tytn to load something in it.
Thanks!
Hernan
ftsv said:
I manage to enter bootloader and start flashing a ROM but I allways get a error: image file corrupted.
I think I need the original Dutch T-mobile ROM.
Anyone know where to find it?
Click to expand...
Click to collapse
run uspl first!!! you can then run installation from any provider of your choice.
http://forum.xda-developers.com/showthread.php?t=311403
USPL cannot be run if your phone is stuck into bootloader?
It starts counting, askts to copy the same information again several times, and get stuck at 50... how is this possible, anyone has the original HTC Dutch rom ? May be the WM5 also! Thanks!
same problem but with no display
i have done the same mistake
have tried to upgrade my T-MOBILE MDA COMPACT III(aka htc p3300) with the HTC TOUCH ROM
it started to upgrade and an error occured
then i have lost the display and all
when i connect it to my laptop using USB i hear a beep in my computer but active syn didnt find any device
i dont know what to do now..please help me it has to be recovered
there must be some way pls pls anyone help me to get my working phone back
will appreciate your concern
thanks
Regards
Faraz Feroz
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
y_bother said:
well you have to get the original ROM for your device.. see their website.. it should be there for free. or try to get it from anyplace.. (the original rom)
and then flash it using SD Card flashing
info for flashing it by that are here:
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
hope it will work
Click to expand...
Click to collapse
thanks Y_Brother
i have downloaded the new rom but it doesnt seem to work too
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!
bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki
Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,
My phone is stuck on HTC SMART MOBILITY black screen, the one that appears right away when u turn ur phone on. I was trying to upgrade the new rom and it said everythin was finished and it restarted the phone by itself then it got stuck in this screen. The thing is that the USB it is not recognize either by the computer or phone so i cannot do anything with the computer in order to boot up. I tried hard resets and nothin. Any help or ideas welcome... thanks
have you tried using bootloader mode? if I'm not mistaken, you need to hold the Power and Camera buttons while resetting the phone. you could then try to flash a new ROM on the phone. hope it helps!
miguel is correct. Put it into bootloader mode like he said, then flash a ROM back onto it and you should be good to go. This happened to me last night and I freaked out a little bit, but everything was fine after I did this.
Help, I'm stuck too. My phone is now in a loop of the black HTC smart mobility screen. I entered bootloader menu and reflashed the 2.17 ROM. -Which completed to 100% and no luck. I've tried this twice. I've entered the bootloader and tried to flash the stock ROM. It finished, but has no radio? What shold I do, Please help!!!
I must also mention that I was in the middle of relocking the phone after I installed the leaked ROM when my computer got the BSOD.
Format a sd card to fat32, place the image on the sd card, name it TITAIMG.nbh and reset to BL it will auto flash the rom and works when this happens
whwaldrep said:
Format a sd card to fat32, place the image on the sd card, name it TITAIMG.nbh and reset to BL it will auto flash the rom and works when this happens
Click to expand...
Click to collapse
By "Image" do you mean the rom .exe file?
johnannie said:
By "Image" do you mean the rom .exe file?
Click to expand...
Click to collapse
not exactly, the .exe file is simple an auto extracting archive, if you extract it, you will get a bunch of files, one which is about 40-60MB in size and that ends in a .nbh extension, that's the one you need.
You guys are awesome. It worked Thank you!
So why does everyone mess around with "relocking" the device and then flashing the 2.17 ROM after trying the 3.16 version when all you have to do is flash is with an sd card? It's SO easy!!!! Thanks again!
johnannie said:
You guys are awesome. It worked Thank you!
So why does everyone mess around with "relocking" the device and then flashing the 2.17 ROM after trying the 3.16 version when all you have to do is flash is with an sd card? It's SO easy!!!! Thanks again!
Click to expand...
Click to collapse
What radio are you using? Did flashing from the SD downgrade the radio as well?
theFear13ss said:
What radio are you using? Did flashing from the SD downgrade the radio as well?
Click to expand...
Click to collapse
I'm pretty sure that it did. When I tried to downgrade to 2.17, the flash worked, but there was no Radio at all. So I tried to reflash the 3.16 and it flashed but didn't work (endless boot to the HTC Screen over and over)
So I tried the SD card method or flashing back to the 2.17 and it worked absolutely perfectly. The only issue was that there was no MSID or MDN but I wrote those down.
Same problem, but turns off
Hey.
I have the same problem, I'm stuck at the "smart mobility" screen. But my problem is that it turns down after some sek with the smart mobility screen.
What should i do??
hii
i have the same problem with smart mobility i bought the phone htc touch from e-bay (gray coulor) and i its didnt work from the begining and the problem is that i dont know what originaly rom it had.
i try to flash rom from the computer(vista) roms (blue, green, new blue,red, 1.11.707.1b_4mb ,e_1.11.707.1b_4mb _4.1.13.42, 1.1b_4.1.12.42_02.93.90_ship,) none of them work some of them update till 3% and some of them till 100% but very fast and then its reset and i get error 270
someone got an idea for me?
Hello,
I need help to!!!
I`m stuck on the same screen. I did the sd card thing but after going to BL screen it flashes for a second to a screen with "Loading" and then return to BL where it stays. Down on screen it says "Serial".
WHAT SHALL I DO? PLEASE HELP!
helo
hi where dose one get that atach file
where does one get the attach file to copy on the sd card, course my phone has also stuck on the smart mobilety black screen
miguelfp1 said:
have you tried using bootloader mode? if I'm not mistaken, you need to hold the Power and Camera buttons while resetting the phone. you could then try to flash a new ROM on the phone. hope it helps!
Click to expand...
Click to collapse
thank you so much it work well
i hardly belive the guy at sprint store have my phone for one day and shake their head
Stuck on SMART MOBILITY
guys pls help,
My Phone is p3400i
I am stuck on the smart mobility screen..My screen says
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
Pls also give the links of the files, to download, to solve the issue.
sethanuj said:
guys pls help,
My Phone is p3400i
I am stuck on the smart mobility screen..My screen says
ONBL 1.17.0000
SPL 1.07.Oref
GSM 02.79.90
OS 1.17.0.0
Pls also give the links of the files, to download, to solve the issue.
Click to expand...
Click to collapse
turn on your device, remove and replace the batteries then go to boot loader mode ( hold the Power and Camera buttons ) you immediately install the rom upgradeshttp !!! You can download it at ://www.htc.com/www/SupportDownload.aspx?p_id=10&cat=0&dl_id=609 good luck
hi to all friend
is there a way for copy arabic font to htc smart?
it's so necessary , i need it
plz help me
as soon as u can
tnx
smart mobility
hello friend
i am having htc p3400 i tried upgrading wm6.5 on it while installing it it shows congrats........ you have updated your rom but when it restart it only shows smat mobility nothing can be done further i tried it many times same problem occurs
one of us advised me to use the memory card techn...to place the image named TITAIMG.nbh but it doesn't solve my issue can any one provide me proper way to solve it
thanks in advance
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
(1) Take out the battery / Unplug the phone
(2) Put the battery back in
(3) Turn it on and keep only Vol Down pressed
You should get a tri-color screen. Connect USB. Once it says USB at bottom, you are good to go with flashing.
hard reset
these solutions don't work. I had the same problem. Anyone has an idea?
any ideas about that? anyone found the solution?
enter boot loader n flash a new rom via sd card?
omnia1994 said:
enter boot loader n flash a new rom via sd card?
Click to expand...
Click to collapse
already done that... same problem... anything else?
reubenbubu said:
I just tried to flash a new ROM by putting it on SD CARD...
i pressed my volume up key and power button for 3 seconds and now my phone is stuck on the HTC logo screen...
it did even go in the HSPL screen
whatever i do it reboots and gets stuck to that screen...
pressing the red button at the back made no difference
what can i do ?
Click to expand...
Click to collapse
put phone into bootloader requires you to press volume DOWN while power resetting the phone. Make sure the ROM is named LEOIMG.nbh and is on the root of the sd card. Make sure the sd card is 8gb or smaller unless it is a class6.
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
you need to put your phone back into bootloader, volume down while powering on the phone. then after you see the tricolored screen, connect it to the usb.
t45o5 said:
already done that... same problem... anything else?
Click to expand...
Click to collapse
what problem are you having exactly???? you haven't told us any details to help you.
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
firebroker said:
same problem, after returning back to stock from android, it is stucked on first htc logo.
phone was freezing, so i decided to flash from android to stock, i used micro sd (RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship)
now it is stucked. please help
Click to expand...
Click to collapse
stuck where, on the splash screen?
do the same thing only this time use the HTC support page for the correct stock ROM.
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
firebroker said:
thank you it helped, but i had to flash the oldest rom on htc.com.. i wonder why i couldn´t flash newer...
Click to expand...
Click to collapse
That's weird, maybe they didn't make a 3.14 ROM for your region.
Help BRicked ! htc incredible s....
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Just downgrade again, I had same prob. Everything good now.
sent from my inspire 4g using xda app.
kaysen said:
was using clockworkmod and cyanogen,decided to flash a android revolution hd rom, intsalled super wipe and flashed it ,then flashed the rom...now phone stuck at htc logo and cant go into clockworkmod recovery,the problem is i left my phone in usb while the flashing ...
..
so decided to format sd and place the PB13IMG.zip on root of sd to reflash rom...still not working !
computer cant detect usb when tried to connect.tried installing drivers,still cant get into recovery....i am using a s-offed htc incredible s...Please help!!!!
will sending phone to htc void warrenty?if so will they repair and how much they will charge?
Your help is much appreciated ...thx !!!
Click to expand...
Click to collapse
woah, how the hell did you end up in this forum? lol.
can you get ADB going?
Post your problem in this forum so people who know your device better can help.
http://forum.xda-developers.com/forumdisplay.php?f=1026
HD2 TMOUS stuck after performing task29
www.golazo.ca said:
I have the same problem. The phone is stuck on HTC logo screen and is not seen by the computer so I cannot reflash. Any idea what can be done???? Mine got stuck after I installed task 29
Click to expand...
Click to collapse
im having the same problem!i installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again but still nothing...
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
hi,
my HD mini got problems with the "sleep of death" I tried some some things and after I formatet the SD card, I thought my SOD was gone.
But tomorrow my device wath off, so I tried to put it on. it vibrates, the HTC logo appaeres (only HTC, no quietly brilliant) than the screen freezes for about 10 seconds and the deviece shut down. I made a few hard resets, but everytime the HD mini wants to restart its the same.
I hope anyone knows about that problem.
Daphoz
Daphoz said:
hi,
my HD mini got problems with the "sleep of death" I tried some some things and after I formatet the SD card, I thought my SOD was gone.
But tomorrow my device wath off, so I tried to put it on. it vibrates, the HTC logo appaeres (only HTC, no quietly brilliant) than the screen freezes for about 10 seconds and the deviece shut down. I made a few hard resets, but everytime the HD mini wants to restart its the same.
I hope anyone knows about that problem.
Daphoz
Click to expand...
Click to collapse
try to remove the SD card and restart the phone
tzacapaca said:
try to remove the SD card and restart the phone
Click to expand...
Click to collapse
I did that already, I also tried it without simcard. unfortunately without succes.
Daphoz said:
I did that already, I also tried it without simcard. unfortunately without succes.
Click to expand...
Click to collapse
Sounds to me like you need to reflash a stock rom.
when powering on hold vol up to enter bootloader then flash official rom.
bruce2728 said:
Sounds to me like you need to reflash a stock rom.
when powering on hold vol up to enter bootloader then flash official rom.
Click to expand...
Click to collapse
first question: where do i get the official rom, or is it left an the device?
second question: when i press vol up and power nothing happens, so I thought try the other direction (vol down and power) so I get red,green,blue and white beam.
at the red beam:
PB92100
SPL-1.31.0000
ENGID 0xF
PCBID 0x80
at the green beam:
MicroP(LED) 0x05
TP SYNAPTICS
at the blue is nothing
at the white:
serial
I can´t do anything on this screen.
yep its vol down for bootloader sorry
you can get official roms from shipped-roms.com
once you have downloaded to your pc unzip the exe with winrar and extract ruu_signd.nbh and flash usin dft_sspl_mini which can be found with a quick search of the forum
hope this helps
try to search the dev forum on the rom, flashing using sd card. it might help. been there done that...
http://forum.xda-developers.com/showthread.php?t=1041988
OK, thanks for all your help.
As I posted in another thread, I started my HD mini is ok, since wednesday evening. I can´t say how I solved the problems, I made a few hardresets and suddenly it works fine. Now I test some things step by step to look whether I can find the reason. At the moment I guess it´s something with the sd card...
If I will find something I will tell you, perhaps its helpfull.
http://forum.xda-developers.com/showthread.php?t=1092430
I have the same problem, but I don't know how to solve it!
I have the same problem, because I wanted install android to device, but after I install recovery the phone didn't boot up! :/
Pls help me!!
Erkaft95 said:
I have the same problem, because I wanted install android to device, but after I install recovery the phone didn't boot up! :/
Pls help me!!
Click to expand...
Click to collapse
I thought that I answered you in your Thread.