Related
Today marks the second time my power button was broken ( wont turn the Wiz on or off) since I bought it used from a friend. I got it to work by eventually loading XM6 (thanks mfrazzz) ROM, and then it started to work, but after I dropped it recently, no go. Is it safe to say it's time for me to get a new phone, or try to solve this power button issue?
I think it's the problem with the power button (switch). I had this problem a few months back. Eventually I had to replace that tiny switch in the mainboard (bought a spare switch and do the soldering myself). Works perfectly afterwards.
If you're comfortable with operating the wizard yourself then, you know, go ahead.
zecoj said:
I think it's the problem with the power button (switch). I had this problem a few months back. Eventually I had to replace that tiny switch in the mainboard (bought a spare switch and do the soldering myself). Works perfectly afterwards.
If you're comfortable with operating the wizard yourself then, you know, go ahead.
Click to expand...
Click to collapse
hi there may i ask where you bought the switch? i have some hardware problems on my wizard and i need to buy parts for it. thank you. your reply would be a great help.
Sorry I didn't mention that but I live in Viet Nam and things like that you can find easily in electric stores where they fix small devices like pda, phones, cameras...
Hello Gents and Gals. I am trying to fix my friends HD2, I flashed his ROM with Energy couple of months ago and all was working fine. He gave the phone back to me saying that it is locked.
I tried unlocking the phone but it seems that the screen is unresponsive, so I flashed it again by going into the boot loader screen "Volume Up + Power Button". The phone stated that it is starting for the first time but the screen was still unresponsive. Any ideas on how to fix this issue? Or do I need to tell him to send the phone back to HTC for repairs?
Sounds like the touch screen died ....
Time for a repair ..
Also this really should have been posted in general , as it is not a ROM release , just an FYI
Aww okay. I'll let him know. Thanks.
I'll post like this in General next time. Tks.
HI, I have now the same problem after ROM Flashed, did you solve the problem by yourself, or really the touch screen died.
Rgds
Same thing with me. I ordered new digitizer+LCD and changed them, but the screen is still unresponsive. Other ROM didn't help.
Some advices?
i seen this happen with several phones, reflash to stock and send to HTC they will repair it for free.
I have same problem,yet my phone was bought 18 months ago...worked perfectly until now.
Can a touch screen get defective after normal usage ?
alexandruvlad said:
I have same problem,yet my phone was bought 18 months ago...worked perfectly until now.
Can a touch screen get defective after normal usage ?
Click to expand...
Click to collapse
Yes it can, if your touch functionality of your HD2 has stopped working then your digitizer has probably went out.
T-Macgnolia said:
Yes it can, if your touch functionality of your HD2 has stopped working then your digitizer has probably went out.
Click to expand...
Click to collapse
Yeah,that's what i thought too - but i read some situations where replaced LCD + Digitizers didn't solve this problem.....
alexandruvlad said:
Yeah,that's what i thought too - but i read some situations where replaced LCD + Digitizers didn't solve this problem.....
Click to expand...
Click to collapse
This is usually due to the replacement components not being properly installed. Also when one is working with the internals they have to be very careful as some of the internals are very easy to break without you even knowing you did. So the cases you spec of are more than likely not because it was not the Digitizer or LCD was not the problem, but human error.
i fixed mine and it didnt cost me
the unresponsive screen maybe the digitizer buts its more likey the end call button, believe it or not dirt can get behind the contact or because the back button is next to we use the far edge of the end call button thus leading to bending the contact, when any of this happens your screen will be unresponsive
you can either take it to a shop and pay for a new screen and digitizer or take it apart and clean the contacts
go to ifixit for step by step guides
hope that helps
Intrigued
dgr1983 said:
... buts its more likey the end call button, believe it or not dirt can get behind the contact or because the back button is next to we use the far edge of the end call button thus leading to bending the contact, when any of this happens your screen will be unresponsive
Click to expand...
Click to collapse
I have no idea what are you talking about, that doesn't make sense, as far as I know is no direct relation between END button and (non-working/responding) touchscreen: you may even disconnect/replace bottom buttons ribbon/flex from motherboard and touchscreen will work if OK(or not, if defective).
Is there anybody who can confirm this(or not)?
3 weeks ago I had a LCD/digitizer replaced (cracked screen, but was still working) all was great till 2 days ago. Screen stopped working - took it back to the place I had replace the screen and they tried 3 brand new screens and still no go. Ended up being my main board - luckily I had a spare HD2 and they pulled that board and all is well again.
Believe it or not your LCD/digitizer might be fine - find someone or a way to test main board would be where I would start after the last 3 days.
Good luck
PS - I did NOT try the end button idea prior to the repair.
Zergalot
zergalot said:
3 weeks ago I had a LCD/digitizer replaced (cracked screen, but was still working) all was great till 2 days ago. Screen stopped working - took it back to the place I had replace the screen and they tried 3 brand new screens and still no go. Ended up being my main board - luckily I had a spare HD2 and they pulled that board and all is well again.
Believe it or not your LCD/digitizer might be fine - find someone or a way to test main board would be where I would start after the last 3 days.
Good luck
PS - I did NOT try the end button idea prior to the repair.
Zergalot
Click to expand...
Click to collapse
If still in your possession, I would be interested to buy the motherboard you just replaced!
PM me if interested!
htc hd2 screen died
I also have a 2009 htc hd2 on which screen does not work.
I'd like to know if it's
- a common problem
- is it possible that it's a software (flashing) issue
- can it be replaced and for how much
martinmartiini said:
I also have a 2009 htc hd2 on which screen does not work.
I'd like to know if it's
- a common problem
- is it possible that it's a software (flashing) issue
- can it be replaced and for how much
Click to expand...
Click to collapse
From my own experience :
1. It's a common issue, there are hundreds of reports in this forum and I read them all because I had the same problem some months ago
2. Probably not. It's generally hardware-related and often the digitizer (touch responsive screen) . Brief explanation : There's a flaw in the design of the HD2, the thin cable wiring the digitizer to the motherboard, is just below the power button. After some extensive use of your powerbutton, it might happen that the power button touches the cable and cause some kind of shortcut in it which makes the digitizer unresponsive to the motherboard.
3. I replaced mine here : http://www.htcphonerepairs.co.uk/ . Fast repair, secure shipping to Belgium, good price and excellent customer support. (Sounds like advertizing but I swear to be only a happy customer )
There are also multiple videos on youtube explaining how replacing the digitizer yourself if you dare !
Also, I read answers saying that you can somewhat "play" with your buttons (especially the power one) to turnaround the problem. That's correct, BUT it's absolutely inevitable that the problem with come back again if you use the buttons, and you'll have to force more and more to unblock again and repeat again and a again... and that will damage your button bar.
I did this during almost 2 months and that put down all my buttons and now they are really close to the chassis which is very annoying. If only I knew it before I would have replaced the digitizer directly !
For 6 months with my new digitizer + using ICS with soft buttons, I have no problem at all !
bib*oops said:
I have no idea what are you talking about, that doesn't make sense, as far as I know is no direct relation between END button and (non-working/responding) touchscreen: you may even disconnect/replace bottom buttons ribbon/flex from motherboard and touchscreen will work if OK(or not, if defective).
Is there anybody who can confirm this(or not)?
Click to expand...
Click to collapse
Just because this dude has "no idea" it doesn't mean he knows it better.
It IS the END button that gets pressed too often and at some point it begins to mess with the digitizer connection. It can be dirt. It can just be the cable came lose and needs tightening, it can be wear-out.
whatever it is, it is caused by the end-key being too close to the connector cable.
If you guys only searched for this on the HD2 Forums before posting this Thread hat not been necessary. It is the most well known design flaw of the HD2 and as such well documented and commented here.
Sneakyghost said:
Just because this dude has "no idea" it doesn't mean he knows it better.
It IS the END button that gets pressed too often and at some point it begins to mess with the digitizer connection. It can be dirt. It can just be the cable came lose and needs tightening, it can be wear-out.
whatever it is, it is caused by the end-key being too close to the connector cable.
If you guys only searched for this on the HD2 Forums before posting this Thread hat not been necessary. It is the most well known design flaw of the HD2 and as such well documented and commented here.
Click to expand...
Click to collapse
This is truth. Save yourself some time and frustration and repair it or get it repaired. It's a great phone.
Sneakyghost said:
Just because this dude has "no idea" it doesn't mean he knows it better.
It IS the END button that gets pressed too often and at some point it begins to mess with the digitizer connection. It can be dirt. It can just be the cable came lose and needs tightening, it can be wear-out.
whatever it is, it is caused by the end-key being too close to the connector cable.
If you guys only searched for this on the HD2 Forums before posting this Thread hat not been necessary. It is the most well known design flaw of the HD2 and as such well documented and commented here.
Click to expand...
Click to collapse
You didn't get it right or at all:
END key may determine touchscreen failure along the time(being the CAUSE! of this), but the EFFECT is an unusable touchscreen, which cannot be repaired in any other way than replacing it(the touchscreen!!, I mean).
Any other attempt to repair, clean, bend, press, cut or whatever WILL NOT FIX an already faulty touchscreen (even caused by END button excessive or not usage) and who thinks otherwise, no problem with me: SWEET DREAMS!
You sound like my comment hurt you. Sorry if it did. I'm not one hundred percent sure that this issue can be fixed without replacing the screen, yet fairly certain. I've now disassembled two HD2 and couldn't quite find the precise spot where the damage occurred, yet after properly assembling the devices again, one came back alive, the other not. The one which has the screen and buttons not working right is the one that got thrown at me by a kind person. It most likely has physical damage somewhere, although I couldn't locate it. The other one didn't get damage and has screen and buttons work well after complete disassembly and assembly.
Both devices also have different screen types.
I now gave up both devices and am withdrawing myself from the HD2 world. Too many issues with the devices getting old.
sent from the tip of my finger
I just bought a replacement power button/ flex cable for Nexus of ebay. Took me around 30 minutes to replace it but its fully working right now. Its around 30 £ .
Item name it "Flex Cable Repair Parts for HTC Google Nexus one G5 1"
Just thought i let you know .
Any pictures?
Is it a tricky fix? I replaced my digitizer just fine so hopefully this wouldn't be a major repair job in comparison. Would love to have my power button working again!
I don't understand why you fixed it yourself, I sent mine back to HTC.
stinkypete said:
I don't understand why you fixed it yourself, I sent mine back to HTC.
Click to expand...
Click to collapse
How much did it cost for the repair out of interest? Did it take them long to get it back to you?
Just curious if to you it looked like a bad button connection or a bad cable? I know sometimes the buttons get crud in them so they dont make a proper connection...
Great info. Too bad we don't have step by step pics. How did you take the phone apart and how deep did you have to go?
Does anyone know why the power button breaks? I have my N1 a year now and (luckily) i never had a HW issue. anyways i was just wondering why it breaks .
Step by step pics would have been nice.
commodoor said:
Does anyone know why the power button breaks? I have my N1 a year now and (luckily) i never had a HW issue. anyways i was just wondering why it breaks .
Step by step pics would have been nice.
Click to expand...
Click to collapse
The power button itself has a small cylindrical piece of plastic which pushes against and presses a small connection that sorta clicks (Which gives you the tactile feedback you feel). I think the problem occurs when either 1) The piece of plastic either bends/breaks/gets damaged in some way that makes that contact much harder to produce 2) The connection is connected to the phone via a cable/flex, however due to the Nexus one design it is bent around in order to be below the power button, while this is fine for the majority some devices, including mine, have seen the flex become damaged for whatever reason and either function intermittently or not at all.
It's also interesting to note that there is nothing holding the flex or the connection in place except for the design itself i.e. the battery bay plastic holds it all in place. My power button was never that responsive (But got progressively worse) so this may explain why.
Its always flex cable breaks and there is no way you can replace just the flex cable.You can find plenty of disassembly instruction over the net and yes you need to disassembly it to the pieces( still less to do than to replace digitizer.)I had a seal broken so i couldn't send it to HTC.
Hollow.Droid said:
The power button itself has a small cylindrical piece of plastic which pushes against and presses a small connection that sorta clicks (Which gives you the tactile feedback you feel). I think the problem occurs when either 1) The piece of plastic either bends/breaks/gets damaged in some way that makes that contact much harder to produce 2) The connection is connected to the phone via a cable/flex, however due to the Nexus one design it is bent around in order to be below the power button, while this is fine for the majority some devices, including mine, have seen the flex become damaged for whatever reason and either function intermittently or not at all.
It's also interesting to note that there is nothing holding the flex or the connection in place except for the design itself i.e. the battery bay plastic holds it all in place. My power button was never that responsive (But got progressively worse) so this may explain why.
Click to expand...
Click to collapse
Thnx for the explanation. I get it now. maybe it smart to always use trackball wake .
Ra1stlin said:
Its always flex cable breaks and there is no way you can replace just the flex cable.You can find plenty of disassembly instruction over the net and yes you need to disassembly it to the pieces( still less to do than to replace digitizer.)I had a seal broken so i couldn't send it to HTC.
Click to expand...
Click to collapse
I did some googling and found a few images of that component, I remember taking it out and it was pretty simple so it should be just fine! Thanks for the info!
Is it the Power button part that you changed ?
Hi,
I have found a photo of the power button part, can you tell us if you changed the full part shown on the photo ?
androidguys.com/2010/09/08/manage-nexus-broken-power-button
And i think you paid it way too much expensive ?
Thanks.
I just replaced my flex cable as well as the loud speaker as well.
iFixit has a few pictures and there is a video on youtube, of the taking apart process. Unfortunately I can't post links
There are two little rubber parts that will likely fall out during the mainboard removal. One goes underneath the connector beside the sim card and one is a part of the microphon.
I wish I could have taken pictures of where those parts go, but alas, my only camera right now is my nexus, so....
BTW, I bought my parts at Mobile Brando. Quite well priced as compared to many other stores of the kind.
was it the whole board that you've replaced? or just the flex cable for the power button. can you further elaborate the steps that you've done?
So this is the item that you purchased? http://mobile.brando.com/google-nexus-one-mother-board-flex-cable-ribbon_p6193c1023d88.html
Can you confirm that the 3.5mm jack is on that board? Additionally, is that motherboard and flex cable for the AMOLED version or the SLCD version?
Do you need to remove the screen and risk getting dust inside there to swap this part?
Hi,
That's exactly the item, at that very same store. I also bought a loudspeaker as well as both back covers there. The audiojack is on board and I believe the flex cable has nothing to do with the screen type. The screen does not have to be removed.
I used those pics: http://www.ifixit.com/Teardown/Nexus-One-Teardown/1654/1
and this video: http://www.youtube.com/watch?v=cznogushN34&feature=player_embedded to figure out how to do it.
Basically, it's quite straight forward, given that you aren't a clumsy oaf ;-)
Remember the two rubber parts that might fall out when you pull off the mainboard assembly. (one at the bottom, for the microphon (http://guide-images.ifixit.net/igi/fpRmPyN6h12mtNvt.huge ,a bit to the left of the plastic tool) and one at the connector beside the sim card (http://guide-images.ifixit.net/igi/EOfeocuwhCRASB6M.huge , on the left part, somewhat down from the serial number sticker).
I have this probleme, but this part costs too much :S....
10. pin ON OFF way in board socket... u make jumper to on off buton
I have replace Power button for my N1. But you can reset your N1 by do'n need it. Except when you want flash rom!
received my dell venue pro late may 2011
i'm currently stationed in the Philippines so I had my unlocked Dell Venue Pro 16g shipped to me by a friend.
it is now June 12 and i've had the phone for less than a month. yesterday the external speaker stopped working out of no where. it was working fine earlier.
the internal speaker works fine. i can make phone calls hear perfectly. i can also insert a headset and all the application sounds work fine such as Zune
my problem is the external speaker. regardless of what volume it is on [ 0 - 30 ] there is no sound coming out
OS VERSION : 7.0.7392.0
My problem is I am stationed in the Philippines and Dell has the worst Customer Service. the last time I had a problem using my credit card JUST to order the phone and I spent over $100 USD just on international calls.
I can't imagine what it's going to cost me to talk to another customer service rep or even safely ship this back to dell and receive a new phone.
If anyone can help me with a solution. please. please do so.
I had a similar problem before I received my replacement. Try removing the battery cover and pressing down on the back in the large area above the speakers. If it's a short (like mine was), pressing down might restore the connection to the speakers and give you sound. Load up the Zune hub and try playing a song to test it.
i also had a problem like this. i restored the conection by pressing down hard just below and on the space bar on the keyboard.
ok. this is weird but the two methods actually worked. i tried both. the sound came back.
what in the world caused this problem in the first place?
i appreciate the replies. thank you very much to the both of you.
I have this problem too, I dropped the phone in its otterbox case at a significant height. I did what you guys said and I heard a clicking sound when I pressed the the area below the space bar. Sound was restored, but I noticed when I took off the otterbox case the phone loses sound unless I press hard.
The sound disappears when there is no pressure on the back of the phone, so when the battery cover is removed this problem is most noticeable. Now I would send this in for warranty, but I am in Canada and I had the phone shipped to a relative in Seattle, I doubt Dell will let me warraty this in Canada.
To save my self the long drive and hassle with dealing with Dell I would rather find a better solution. Im guessing the area where the speaker connects is loose. Is it possible if the screws came loose in that back area? Would loosening them and tightening them work. Or is something else wrong? Is there perhaps a tear down instruction manual for this phone? Can I fix it myself? Otherwise I have to leave the phone in its case for its whole life and I'd rather not do that...
Big thanks to the two helpful posts. Clicked thanks button twice for that
Anyhow, just wanted to mention that mine came loose just from plugging in and out the USB charger. The car charger has a springy cable and might be the culprit as I tag on it.
Which version did you get? Pcs or aws. Pldt uses pcs, right? My company has an office in manila and we were thinking about sending a few dvp out there.
Sent from my Venue Pro using XDA Windows Phone 7 App
I was having the same problem and tried the solution mentioned (pressing down hard) and it also restored the sound! I think this is a sign of a poor build quality.
I too was having the same issue. I had been without sound for the last week and only today, without doing anything in particular, the sound came back. I am not sure for how long though! I was going to hard reset the phone this weekend to see if it was the Mango update that caused the problem (it only happened after the update). I guess I will wait it out and see.
My DVP has the similar problem after 10 days. Actually it is not completely soundless. But the volume is too low to hear 10cm away from my ear. It may not be hardware failure. The problem is I lost my backup point at 7392 and I am in China. Any one can help me to restore to 7392?
leonardli said:
My DVP has the similar problem after 10 days. Actually it is not completely soundless. But the volume is too low to hear 10cm away from my ear. It may not be hardware failure. The problem is I lost my backup point at 7392 and I am in China. Any one can help me to restore to 7392?
Click to expand...
Click to collapse
You are out of luck...Backups are device specific
MJCS said:
You are out of luck...Backups are device specific
Click to expand...
Click to collapse
Sounds my DVP is dead. Getting it back to Dell may be the only solution. I am thinking of buying a second-hand palm pre while the DVP away from me.
Hi,
I'd like to thanks for the solution of pressing below the space bar. It worked for me. Strange problem... Thanks !!!
edmichel said:
Hi,I'd like to thanks for the solution of pressing below the space bar. It worked for me. Strange problem... Thanks !!!
Click to expand...
Click to collapse
a less physical solution is simply blow air into the microUSB port. keep doing it and the speaker will come back. if you have compressed air, a brief shot would do.
pressing corner helped me too, not sure for how long
Had a similar problem. If you tear down the DVP as if you are replacing the screen
Once you get the two halves separated, remove the keyboard. Below the keyboard is the "speaker" it has two small progs if memory serves if you take a small screwdriver and pry them up and reassemble all will work well .
The "pressing" solution (if it works) effectively bends the back of the cover and forces the contact.
I will try to post a teardown of the DVP with screen replacement (ALL THE WAY.. current video on Youtube stops before you have to replace the screen itself.. as it assumes you have the more complete part (with is no longer available, only the glass is now)
cdgoin said:
Had a similar problem. If you tear down the DVP as if you are replacing the screen
Once you get the two halves separated, remove the keyboard. Below the keyboard is the "speaker" it has two small progs if memory serves if you take a small screwdriver and pry them up and reassemble all will work well .
The "pressing" solution (if it works) effectively bends the back of the cover and forces the contact.
I will try to post a teardown of the DVP with screen replacement (ALL THE WAY.. current video on Youtube stops before you have to replace the screen itself.. as it assumes you have the more complete part (with is no longer available, only the glass is now)
Click to expand...
Click to collapse
You might not want to pry up the speaker pins too hard though as they're spring loaded but has a small clip stopper that restrains the pin from over bending the wrong way. If you get it pass the clip, you have to make sure to put the pin back into the loop clip. It'll be more clear when you have it in front of you.
I usually just clean the contacts (pins and board side) with a screw driver/sandpaper and it'll be all good.
And a teardown will always be awesome cdgoin :good: Peeps might want to seal the LCD to the glass part with a little glue gun glue too to avoid dust getting into the screen. I find sealing the top ear piece part does the trick (bottom part helps too).
This is a strange solution but works!
Shoot2ill said:
I had a similar problem before I received my replacement. Try removing the battery cover and pressing down on the back in the large area above the speakers. If it's a short (like mine was), pressing down might restore the connection to the speakers and give you sound. Load up the Zune hub and try playing a song to test it.
Click to expand...
Click to collapse
This worked with my Samsung Galaxy S (Mark I) too!
Thank you. After being without sound for months and wondering if I messed up the OS or needed a hardware fix ($$$) - this worked.
After reading several posts to find a cure for my HTC HD2 unresponsive touch screen,( Slider wont slide to open applications), I decided to verify a theory. Software... Digitalizer screen, or power button.
Ok, first I Instelled about six different android versions, and the screen slide still failed. I reverted the cell back to original t-mobile windows software, and still locked screen.
Conclussion: The sofware is not the problem.
After several attempts pressing the red power button, I got the slider to open. Briefly, it locked again. Pressed the red button hard and tried to work the slide on the touch screen. Again briefly worked. After several more attempts I got it to slide and while the phone was awake, everything worked perfect. I played games, oppened applications, texted, made phone calls, and the touch screen worked flawless.
Conclussion: The digitalizer (Thin top glass screen on top of the display that responds to touch) is not the problem.
This led me to belibe that the power button was at fault. I called T-mobile and after explaining the problem, they decided to send me a different type of windows cell. I want my htc. So I declined the offer and decided to void the warranty and take matters in my own hands. Yes, I opened my HTC HD2. This is what I found: After about an hour I had carefully taken my htc apart without braking or scratching the phone or screen. When I finaly got to the buttons on the bottom, I noticed how cheap they where made. A thin copper circle on top of two contacts held in place by tape. Yes you heard right, tape. After a while, beating on the red end key for maybe a year or two, the tape brakes and the metal piece slides to the side, and makes the button to malfunction, that's why the hard pressing to make it work. I tried A bottle of comppressed power air to clean them before disassembling the phone but the way they are installed It's not possible to clean them like that.
Conclussion: The red end key is faulty.
I decided to keep the cell alive so I went on e-bay and ordered the buttons, and just in case I also got a new digitalizer for testing purpose.
The buttons panel was about 4 dollars and some change, and the digitalizer (touch screen) was about 14 dollars for a total of less than 20 bucks. (Worth it)
So here are some pics of my cell buttons, and what it should look like. After I get the parts and assemble it I will conclude and let you know the final and official veredict. As of now, it all leads to the button.
Please do let us know how you got on. I have a HD2 which I'd like to get up and running again so I can play with custom roms and leave my other mobile alone...lol. Any chance you could link to the places you got parts/tape from, and what tools we would need?
Cheers! :good:
Did it worked ??? i am also in the same situation...please share the details,
bijeeshvs said:
Did it worked ??? i am also in the same situation...please share the details,
Click to expand...
Click to collapse
+1
listening in as well
sheesh! my wife's HD2 also stop responding yesterday, seems like clockwork that a lot are having the same problem
first have to find "how to open your HD2" w/o breaking anything in the process :silly:
Damn. The second time I'm hearing about the red button giving problems.... Will be waiting results from you dude!!! +1
still wayting for the parts
Well, I am still wayting for the parts, they are on the way. The parts I found on E-bay. The buttons panel was about five or 6 dollars, I also got the digitalizer which was about 15 dollars. As soon as I get the parts, I will assemble my hd2 with the original digytalizer (the thin top screen) and test to make sure the buttons were the problem. If all goes well, I will post a complete test result with links to how to get the parts, a link on how to dissassemble the hd2 and all info I can to help on this issue. I did a step back in life, and pulled out my trusty 7 years old motorola razr v3 and stuck my sim card so i can talk and text 5 words in 7 minutes. No internet... I need my HD2... Well, I will report back as soon as I can. Thanks for the wait...
@dragonsuicida
will be waiting for your findings & ways to dis-assemble the HD2 :fingers-crossed:
You were lucky to find the buttons' panel for 4bucks. I just checked out Ebay india, and the panel is 40bucks!!! What a robbery!
Wow. Me too!
I have been running Win6.5 still on my HD2, and have found in the last few days, my screen locks and I can't unlock it.
I came here deciding it was a software issue and was going to look into putting Android on my HD2.
I was slowly coming to the conclusion that it was the power button.
If I make an effort to NOT touch it - my phone seems happy.
It's amazing that we're all having the same problem about 2 and a bit years down the track since the HD2 was released - almost a built in expiry!!
And yeah - lots of details on how to fix it would be great.
The HD2 is too good-a-piece of hardware to allow a ****ty hardware button to be the cause of it's death.
New Keypad Button Flex Cable Ribbon For HTC HD2
Copy this:
New Keypad Button Flex Cable Ribbon For HTC HD2 T8585 and paste it on ebay, it will bring the buttons for the htc hd2. I belive they all come from china, but after I test them I will let you all know if they work and if they are worth it.
Copy this: REPLACEMENT DIGITIZER TOUCH SCREEN LENS for HTC HD2 T8585 and paste it on e-bay and it will bring you the digitizer for the hd2.
copy this: http://www.youtube.com/watch?v=YdOC3Xxo_k0 and paste it on your web browser, and it will lead you to a video on How To Replace Repair Disassemble Screen Digitizer. When it gets to a part that say that you have to put the phone in a oven, is just to melt the tape or glue holding the screen to the phone. I just used a hair dryer to war the screen enough to carefully remove the screen and the digitizer from the phone without breaking them, It works. I will be back soon with more info. I believe my digitizer screen is on the mail box now. Will report back...
I have same problem. Today I bought a flex cable ribbon and waiting for the dispatch (estimated in 2 days). I will also report back..
Same problem here!
Hope to hear soon that this is the way to go to fix it
You have to stick back the tape in the housing. The tape is electrically conductive. It connects the ground of the keyboard flex cable with the ground of the housing.
Copy this: REPLACEMENT DIGITIZER TOUCH SCREEN LENS for HTC HD2 T8585 and paste it on e-bay and it will bring you the digitizer for the hd2.
Click to expand...
Click to collapse
Be careful! There are two types of digitizer:
- Solder version http://www.parts4repair.com/htc-touch-hd2-touch-screen-with-digitizer-solder-version/
- Socket version http://www.parts4repair.com/htc-touch-hd2-touch-screen-with-digitizer-socket-version/
Be very careful when ordering parts, specially the digitizer they have several kinds, solder and socket, and different socket sizes. Compare parts with the ones in your cell to make sure, don't just believe the advertisements.
Hi, any updates on this? I'm also having this issue, but in my case, even pressing end call really really hard doesn't solve the problem... snif..
+1 on that
i pressed all the keys even the lower part of the LCD & flashed new roms but no joy :crying:
will bring to shop instead I'm afraid to open it up, it might end up even worse
Just be extremely careful when you try this. That flex cable is so incredible fragile and easy to tear. My roommate tore the volume rocker section right off of his HD2.
Hi dragonsuicida
Were you able to get your touchscreen to work?