I found the odin or mobile odin is unable to flash the baseband ZHUDMI1, XXUEMI8 and XXUEMJ3.
When I use odin to flash, the whole process is success but the baseband version in the handphone doesnot change when viewing.
If I use mobile odin, the process will stuck at the blue robot and the last line shows" Modem #2 Clearing..."
Unless I use odin to flash the whole rom of XXUEMI8(4.3) and the the baseband will be undated to XXUEMI8. I would like to know what is the problem.
Which files are you using to flash the baseband?
adam1000rr said:
Which files are you using to flash the baseband?
Click to expand...
Click to collapse
All the files I downloaded are from here:
http://forum.xda-developers.com/showthread.php?t=2192025
and the Odin I used is odin3 1.85, odin3 3.09 and mobile odin 3.76. None of these works.
But luckily, it seems that my baseband is not flashed and remain as old version and working.
In the post it recommends you use Odin 3.04 and untick "Autoreboot", you should try following these instructions to the letter and see if it works!
Ok it worked.
If anyone else is having issues with the baseband not changing, do this.
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
adam1000rr said:
In the post it recommends you use Odin 3.04 and untick "Autoreboot", you should try following these instructions to the letter and see if it works!
Click to expand...
Click to collapse
It really works, now my baseband is the newest XXUEMJ3, thank you.
I have downloaded the MJ6 firmware for SM-N9005 which includes MJ4 modem.
I extracted modem.bin and put it in a .tar file to flash with Odin, as I have the DjeMBey MJ6 rom but old baseband.
It flashes successfully but my phone shows MI6 baseband still The problem is because "Auto Reboot" is ticked.
The solution to successfully flash MJ4 baseband is as follows:
1) Flash the modem.bin inside a .tar file in Odin under CP (or Phone). UNTICK THE "Auto Reboot" OPTION
2) WAIT UNTIL IT SAYS PASSED
3) Keep phone on, unplug phone, close Odin, plug into different USB port and open Odin again
4) Flash modem.bin inside .tar file again as in step 1
5) WAIT UNTIL IT SAYS PASSED
6) Keep phone on, unplug phone, close Odin, plug into different USB port and open Odin again
7) Flash stock NON-HLOS.bin file from MJ6 firmware in Odin
8) WAIT UNTIL IT SAYS PASSED
9) Take out battery
10) Reinsert battery
11) Profit
I hope this helps some people
Info is originally from @BlueChris
Link to NON-HLOS.bin (to fix video recording issue): Here
danieljamie said:
I have downloaded the MJ6 firmware for SM-N9005 which includes MJ4 modem.
I extracted modem.bin and put it in a .tar file to flash with Odin, as I have the DjemBy MJ6 rom but old baseband.
It flashes successfully but my phone shows MI6 baseband still
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
You need 1 file more m8 for mj4 modem and write it with odin, take it from here
http://forum.xda-developers.com/showthread.php?p=47110486
Sent from my SM-N9005 using Tapatalk
BlueChris said:
You need 1 file more m8 for mj4 modem and write it with odin, take it from here
http://forum.xda-developers.com/showthread.php?p=47110486
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks, and modified my original post.
I made a N9005-2modemsMJ4-RomMJ6.tar.md5 whit both modem.bin and NON-HLOS.bin.
(2modems means two files to one modem. For me must be flashed always together).
Flashed whit MobileOdin, worked very well. (on MO Chainfire call that modem and modem #2).
PS: By Odin3 I think must be also the same, both 2 files inside the .tar.md5
Hi @danieljamie
Your steps 1) to 11) on OP are horrible, I don't like same work. Sorry.
ValenteL said:
I made a N9005-2modemsMJ4-RomMJ6.tar.md5 whit both modem.bin and NON-HLOS.bin.
(2modems means two files to one modem. For me must be flashed always together).
Flashed whit MobileOdin, worked very well. (on MO Chainfire call that modem and modem #2).
PS: By Odin3 I think must be also the same, both 2 files inside the .tar.md5 (If You want TRY)
Hi @danieljamie
Your steps 1) to 11) on OP are horrible, I don't like same
@danieljamie,
Thanks ValenteL !
Thanks to open this thread: gonna help lot of peeps
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sonydesouza said:
ValenteL said:
I made a N9005-2modemsMJ4-RomMJ6.tar.md5 whit both modem.bin and NON-HLOS.bin.
(2modems means two files to one modem. For me must be flashed always together).
Flashed whit MobileOdin, worked very well. (on MO Chainfire call that modem and modem #2).
PS: By Odin3 I think must be also the same, both 2 files inside the .tar.md5 (If You want TRY)
Hi @danieljamie
Your steps 1) to 11) on OP are horrible, I don't like same
@danieljamie,
Thanks ValenteL !
Thanks to open this thread: gonna help lot of peeps
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What's wrong with the steps? It worked for me.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Nothing wrong !!! Your method worked and it gonna help a lot of people. Thanks !
ValenteL said:
I made a N9005-2modemsMJ4-RomMJ6.tar.md5 whit both modem.bin and NON-HLOS.bin.
(2modems means two files to one modem. For me must be flashed always together).
Flashed whit MobileOdin, worked very well. (on MO Chainfire call that modem and modem #2).
PS: By Odin3 I think must be also the same, both 2 files inside the .tar.md5
Hi @danieljamie
Your steps 1) to 11) on OP are horrible, I don't like same work. Sorry.
Click to expand...
Click to collapse
Dear Valente, could we have a link for your file tar? Thanks.
lukemo said:
Dear Valente, could we have a link for your file tar? Thanks.
Click to expand...
Click to collapse
Here it is: https://meocloud.pt/link/ed71f278-f326-43c6-ae82-e0fe29ce4f69/N9005-2modems-XXUDMJ4-RomMJ6.tar.md5
Look, for me work well. Try at your risk alright?
New Rom BTU XXUDMJ7 have the Modem XXUDMJ7.
Flashing Modem's MJ4 and MJ7
From a question on another Thread:
Yes but only after tried it very well. I have the Rom MJ7 modem MJ7.
Flashed by Odin v3.09 this modem MJ4 and okay. On Settings/aboutPhone MJ4 alright.
Speedtest.net on 3G ( my card is 3G) download at 12 Mb/s. Not tested 4G.
https://meocloud.pt/link/ed71f278-f326-43c6-ae82-e0fe29ce4f69/N9005-2modems-XXUDMJ4-RomMJ6.tar.md5
Flashed now the next modem MJ7 okay also. On settings I have MJ7, Speed test.net the same, 12 Mb/s.
https://meocloud.pt/link/7d77deeb-85f4-4324-b777-3170850752c3/N9005-2modems-DMJ7-RomDMJ7.tar.md5
For me worked well. Try it at Your risk, alright?
Not need to make the tour at world...
Thanks, followed your instructions and it worked.:good:
hi
I am on B1 modem and and want to flash c2 modem. I have the tar file (contains modem.bin and non-hlos.bin). i have tried both odin and mobile odin.. the flash does not give any errors but the modem does not change. any help will be highly appreciated.
thanks
xinfinityoO said:
hi
I am on B1 modem and and want to flash c2 modem. I have the tar file (contains modem.bin and non-hlos.bin). i have tried both odin and mobile odin.. the flash does not give any errors but the modem does not change. any help will be highly appreciated.
thanks
Click to expand...
Click to collapse
Did you do some research? Put it on Phone not Pda. Shut down your phone completely and leave about 3sec, then flash the modem and see how it goes.
Hi all!!! I have the Wind Mobile Canada M919V. I've downloaded the latest firmware from Sammobile in tar/md5 format. I've extracted the tar file and see the modem.bin, boot.img, recovery.img, etc. Which file is the kernel? How do I extract the kernel so I can flash it with odin after installing a custom rom through bootstrap? I've tried googling for the answer but couldn't come up with anything. Anyone? Thx!
Boot.img. If you're rooted use the flashify app. No need for Odin
Sent from my Nexus 5 using XDA Free mobile app
Thanks!
After a firmware flash in ODIN, is the baseband supposed to be updated? The firmware file does contain the modem.bin and non-hlos.bin, but after booting into the ROM and checking About, the baseband remained the same. I know there's different changes in the new baseband so I'm not sure why it didn't flash. I tried flashing the firmware twice, the same thing. Everything works fine, just that the baseband isn't updated.
Would I have to extract the bin files and repackage them into a .tar.md5 file and flash it in ODIN with CP ticked? Seems like a 2 step process when the entire firmware should've been flashed with AP ticked.
Try to do unchecking "Auto Reboot" and reboot manually.