hi
I am on B1 modem and and want to flash c2 modem. I have the tar file (contains modem.bin and non-hlos.bin). i have tried both odin and mobile odin.. the flash does not give any errors but the modem does not change. any help will be highly appreciated.
thanks
xinfinityoO said:
hi
I am on B1 modem and and want to flash c2 modem. I have the tar file (contains modem.bin and non-hlos.bin). i have tried both odin and mobile odin.. the flash does not give any errors but the modem does not change. any help will be highly appreciated.
thanks
Click to expand...
Click to collapse
Did you do some research? Put it on Phone not Pda. Shut down your phone completely and leave about 3sec, then flash the modem and see how it goes.
Related
Hello
I'm trying to flash the jpu modem on stock jpy since I had good results with it. I don't really know where to get it correctly. I've found a jpu modem in the doc rom thread, but it's some zip file, i took the modem.bin file out and just made a TAR out of it. seems other modem tar files include just that.
But i don't know if it's correct.
And I'd welcome info on how to flash it, should I put it in the phone field?
Since this is a great way to brick a phone, I'd like some advice on this matter.
Thank you.
You can use heimdal and just flash the modem.bin directly
Sent from my GT-I9000 using Tapatalk
creat0r79 said:
And I'd welcome info on how to flash it, should I put it in the phone field?
Click to expand...
Click to collapse
Don't put it in a TAR file. Just flash the modem.bin directly. Put it in the "PHONE" box. Make sure Repartition is unchecked and no other fields are filled.
After it's done, go to About to verify it flashed correctly. (Look at Baseband)
Done, running JPU modem on stock JPY...seems to also boot faster now
Thank you.
Hi
I am new to Flashing .. Do I need to do Factory Reset even for flashing only the modem.bin file or not..pls reply.
creat0r79 said:
Hello
I'm trying to flash the jpu modem on stock jpy since I had good results with it. I don't really know where to get it correctly. I've found a jpu modem in the doc rom thread, but it's some zip file, i took the modem.bin file out and just made a TAR out of it. seems other modem tar files include just that.
But i don't know if it's correct.
And I'd welcome info on how to flash it, should I put it in the phone field?
Since this is a great way to brick a phone, I'd like some advice on this matter.
Thank you.
Click to expand...
Click to collapse
The .zip file in Doc's thread is meant to be flashed through recovery (CWM or 2e). But I guess flashing through Odin worked for you, so all's well.
cs_k said:
Hi
I am new to Flashing .. Do I need to do Factory Reset even for flashing only the modem.bin file or not..pls reply.
Click to expand...
Click to collapse
not required
seltaeb said:
The .zip file in Doc's thread is meant to be flashed through recovery (CWM or 2e). But I guess flashing through Odin worked for you, so all's well.
Click to expand...
Click to collapse
they r not flashing .zip they are flashing modem.bin in ODIN. It works.
hello i have a big problem
i have the 2.3.6 android and the basement version says unknown
what i must do to fix this ?also dont find sim
pls help
flash modem.bin with cwm or odin
Phone.tar with Odin
Or make an update.zip of modem.bin and flash it with CWM Recovery.
tids2k said:
flash modem.bin with cwm or odin
Phone.tar with Odin
Or make an update.zip of modem.bin and flash it with CWM Recovery.
Click to expand...
Click to collapse
where i can find the flash modem ?
i must modem fhlash and phone .tar ? or one of this 2?
thank u !!
I have downloaded the MJ6 firmware for SM-N9005 which includes MJ4 modem.
I extracted modem.bin and put it in a .tar file to flash with Odin, as I have the DjeMBey MJ6 rom but old baseband.
It flashes successfully but my phone shows MI6 baseband still The problem is because "Auto Reboot" is ticked.
The solution to successfully flash MJ4 baseband is as follows:
1) Flash the modem.bin inside a .tar file in Odin under CP (or Phone). UNTICK THE "Auto Reboot" OPTION
2) WAIT UNTIL IT SAYS PASSED
3) Keep phone on, unplug phone, close Odin, plug into different USB port and open Odin again
4) Flash modem.bin inside .tar file again as in step 1
5) WAIT UNTIL IT SAYS PASSED
6) Keep phone on, unplug phone, close Odin, plug into different USB port and open Odin again
7) Flash stock NON-HLOS.bin file from MJ6 firmware in Odin
8) WAIT UNTIL IT SAYS PASSED
9) Take out battery
10) Reinsert battery
11) Profit
I hope this helps some people
Info is originally from @BlueChris
Link to NON-HLOS.bin (to fix video recording issue): Here
danieljamie said:
I have downloaded the MJ6 firmware for SM-N9005 which includes MJ4 modem.
I extracted modem.bin and put it in a .tar file to flash with Odin, as I have the DjemBy MJ6 rom but old baseband.
It flashes successfully but my phone shows MI6 baseband still
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
You need 1 file more m8 for mj4 modem and write it with odin, take it from here
http://forum.xda-developers.com/showthread.php?p=47110486
Sent from my SM-N9005 using Tapatalk
BlueChris said:
You need 1 file more m8 for mj4 modem and write it with odin, take it from here
http://forum.xda-developers.com/showthread.php?p=47110486
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks, and modified my original post.
I made a N9005-2modemsMJ4-RomMJ6.tar.md5 whit both modem.bin and NON-HLOS.bin.
(2modems means two files to one modem. For me must be flashed always together).
Flashed whit MobileOdin, worked very well. (on MO Chainfire call that modem and modem #2).
PS: By Odin3 I think must be also the same, both 2 files inside the .tar.md5
Hi @danieljamie
Your steps 1) to 11) on OP are horrible, I don't like same work. Sorry.
ValenteL said:
I made a N9005-2modemsMJ4-RomMJ6.tar.md5 whit both modem.bin and NON-HLOS.bin.
(2modems means two files to one modem. For me must be flashed always together).
Flashed whit MobileOdin, worked very well. (on MO Chainfire call that modem and modem #2).
PS: By Odin3 I think must be also the same, both 2 files inside the .tar.md5 (If You want TRY)
Hi @danieljamie
Your steps 1) to 11) on OP are horrible, I don't like same
@danieljamie,
Thanks ValenteL !
Thanks to open this thread: gonna help lot of peeps
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sonydesouza said:
ValenteL said:
I made a N9005-2modemsMJ4-RomMJ6.tar.md5 whit both modem.bin and NON-HLOS.bin.
(2modems means two files to one modem. For me must be flashed always together).
Flashed whit MobileOdin, worked very well. (on MO Chainfire call that modem and modem #2).
PS: By Odin3 I think must be also the same, both 2 files inside the .tar.md5 (If You want TRY)
Hi @danieljamie
Your steps 1) to 11) on OP are horrible, I don't like same
@danieljamie,
Thanks ValenteL !
Thanks to open this thread: gonna help lot of peeps
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What's wrong with the steps? It worked for me.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Nothing wrong !!! Your method worked and it gonna help a lot of people. Thanks !
ValenteL said:
I made a N9005-2modemsMJ4-RomMJ6.tar.md5 whit both modem.bin and NON-HLOS.bin.
(2modems means two files to one modem. For me must be flashed always together).
Flashed whit MobileOdin, worked very well. (on MO Chainfire call that modem and modem #2).
PS: By Odin3 I think must be also the same, both 2 files inside the .tar.md5
Hi @danieljamie
Your steps 1) to 11) on OP are horrible, I don't like same work. Sorry.
Click to expand...
Click to collapse
Dear Valente, could we have a link for your file tar? Thanks.
lukemo said:
Dear Valente, could we have a link for your file tar? Thanks.
Click to expand...
Click to collapse
Here it is: https://meocloud.pt/link/ed71f278-f326-43c6-ae82-e0fe29ce4f69/N9005-2modems-XXUDMJ4-RomMJ6.tar.md5
Look, for me work well. Try at your risk alright?
New Rom BTU XXUDMJ7 have the Modem XXUDMJ7.
Flashing Modem's MJ4 and MJ7
From a question on another Thread:
Yes but only after tried it very well. I have the Rom MJ7 modem MJ7.
Flashed by Odin v3.09 this modem MJ4 and okay. On Settings/aboutPhone MJ4 alright.
Speedtest.net on 3G ( my card is 3G) download at 12 Mb/s. Not tested 4G.
https://meocloud.pt/link/ed71f278-f326-43c6-ae82-e0fe29ce4f69/N9005-2modems-XXUDMJ4-RomMJ6.tar.md5
Flashed now the next modem MJ7 okay also. On settings I have MJ7, Speed test.net the same, 12 Mb/s.
https://meocloud.pt/link/7d77deeb-85f4-4324-b777-3170850752c3/N9005-2modems-DMJ7-RomDMJ7.tar.md5
For me worked well. Try it at Your risk, alright?
Not need to make the tour at world...
Thanks, followed your instructions and it worked.:good:
Hello,
Today i have flashed the new lollipop for my S4 black edition (I9505).
But when i try to turn wifi on it cant go on,
It's sliding to the middle and then back.
Anyone have a solution for this?
Extract the modem from the update package and flash it using Odin.
you can also try to flash another kernel
Strephon Alkhalikoi said:
Extract the modem from the update package and flash it using Odin.
Click to expand...
Click to collapse
Have the modem.bin fule extracted but how do i flash it with odin?
If i click on pda i can't select the file.
We have a reference thread in General about modems. Within it are instructions to flash via Odin plus troubleshooting assistance. Read it.
Friends model is Model: G928G. I tried to install a ROM Sotck via Odin and gives me error at the end of the process with many diferent Sotock ROMs. I have tried on 4 different computers from i3 to i7 respectively, also using 3 cable OEM Samsung, all files installed properly, only allows the Smart Switch can a make reinstallation. any suggestions?
MelvinGt5 said:
Friends model is Model: G928G. I tried to install a ROM Sotck via Odin and gives me error at the end of the process with many diferent Sotock ROMs. I have tried on 4 different computers from i3 to i7 respectively, also using 3 cable OEM Samsung, all files installed properly, only allows the Smart Switch can a make reinstallation. any suggestions?
Click to expand...
Click to collapse
Hey, just an opinion. Search around G928G modem.tar and flash it by CP tab of odin before flashing the firmware. Than try flasing firmware. If fails again, remove modem.bin file from firmware(dont know how to). Otherwise extract the whole files from firmware, delete modem.bin and make the rest files as firmware with proper tool(TAR maker or else). Good luck.
Powered by Elektrik
Konsstantine34 said:
Hey, just an opinion. Search around G928G modem.tar and flash it by CP tab of odin before flashing the firmware. Than try flasing firmware. If fails again, remove modem.bin file from firmware(dont know how to). Otherwise extract the whole files from firmware, delete modem.bin and make the rest files as firmware with proper tool(TAR maker or else). Good luck.
Powered by Elektrik
Click to expand...
Click to collapse
Going to try...
Konsstantine34 said:
Hey, just an opinion. Search around G928G modem.tar and flash it by CP tab of odin before flashing the firmware. Than try flasing firmware. If fails again, remove modem.bin file from firmware(dont know how to). Otherwise extract the whole files from firmware, delete modem.bin and make the rest files as firmware with proper tool(TAR maker or else). Good luck.
Powered by Elektrik
Click to expand...
Click to collapse
Resolved...
with new update 6.0.1 G928GDDS2BPD2_G928GODD2BPC3 Flash MODEM with ODIN and later Flash ROM:good:
MelvinGt5 said:
Resolved...
with new update 6.0.1 G928GDDS2BPD2_G928GODD2BPC3 Flash MODEM with ODIN and later Flash ROM:good:
Click to expand...
Click to collapse
Well done, glad to know.