I found the odin or mobile odin is unable to flash the baseband ZHUDMI1, XXUEMI8 and XXUEMJ3.
When I use odin to flash, the whole process is success but the baseband version in the handphone doesnot change when viewing.
If I use mobile odin, the process will stuck at the blue robot and the last line shows" Modem #2 Clearing..."
Unless I use odin to flash the whole rom of XXUEMI8(4.3) and the the baseband will be undated to XXUEMI8. I would like to know what is the problem.
Which files are you using to flash the baseband?
adam1000rr said:
Which files are you using to flash the baseband?
Click to expand...
Click to collapse
All the files I downloaded are from here:
http://forum.xda-developers.com/showthread.php?t=2192025
and the Odin I used is odin3 1.85, odin3 3.09 and mobile odin 3.76. None of these works.
But luckily, it seems that my baseband is not flashed and remain as old version and working.
In the post it recommends you use Odin 3.04 and untick "Autoreboot", you should try following these instructions to the letter and see if it works!
Ok it worked.
If anyone else is having issues with the baseband not changing, do this.
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
adam1000rr said:
In the post it recommends you use Odin 3.04 and untick "Autoreboot", you should try following these instructions to the letter and see if it works!
Click to expand...
Click to collapse
It really works, now my baseband is the newest XXUEMJ3, thank you.
Related
I tried to restore my device to stock rom N900XXUBMJ1_N900OJVBMI5_N900XXUBMI2
went to download mode
started odin
got the tar file at pda
started to restore then stuck at this point
sboot.bin
then odin fails
Please Help
algaleka said:
I tried to restore my device to stock rom N900XXUBMJ1_N900OJVBMI5_N900XXUBMI2
went to download mode
started odin
got the tar file at pda
started to restore then stuck at this point
sboot.bin
then odin fails
Please Help
Click to expand...
Click to collapse
What odin you using
jaythenut said:
What odin you using
Click to expand...
Click to collapse
I tried all version 1.85 an 3.07 and 3.09
algaleka said:
I tried all version 1.85 an 3.07 and 3.09
Click to expand...
Click to collapse
i would download firmware again from www.sammobile.com and use 3.07
Thanks for Your help, i just tried and same error
I'm running Goldeneye 8.0, 4.2.2. I'm looking to update to new MK6 baseband so I can flash goldeneye with kitkat but when I flash MK6 through mobile Odin, I get an error saying that memory is protected or something like that. Can anyone help with this?
I had the same issue when flashing with mobile odin. I ended up using Odin to flash the modem. Only difference is that I was on stock 4.2.2 with MG1 baseband.
Modem files: http://forum.xda-developers.com/showthread.php?t=2324667
ODIN download: http://forum.xda-developers.com/showthread.php?t=1738841
Instructions:
Unzip contents to your computer.
Put your phone into download mode
Open Odin
Connect your phone to your computer
Place modem .bin file in PHONE section
make sure to untick autoreboot
flash
Reboot
I'd recommend checking if you have the latest drivers as well. Also check the 'Modem files' thread I linked above - seems like some people are having the same issue with i337m
ashktn said:
I had the same issue when flashing with mobile odin. I ended up using Odin to flash the modem. Only difference is that I was on stock 4.2.2 with MG1 baseband.
Modem files: http://forum.xda-developers.com/showthread.php?t=2324667
ODIN download: http://forum.xda-developers.com/showthread.php?t=1738841
Instructions:
Unzip contents to your computer.
Put your phone into download mode
Open Odin
Connect your phone to your computer
Place modem .bin file in PHONE section
make sure to untick autoreboot
flash
Reboot
I'd recommend checking if you have the latest drivers as well. Also check the 'Modem files' thread I linked above - seems like some people are having the same issue with i337m
Click to expand...
Click to collapse
Thanks for the reply, I've come to find out that you have to be on a stock rom to flash baseband, that's why it wasn't working for me before.
Perfect that's good to know if a new baseband gets released.
Sent from my SGH-I337M using xda app-developers app
my s4 sprint l720 is unknown baseband i updated to 4.3 but still same is there any way to fix???
any help will b greatfull
falak said:
my s4 sprint l720 is unknown baseband i updated to 4.3 but still same is there any way to fix???
any help will b greatfull
Click to expand...
Click to collapse
check the bootloader you have and flash the .tar firmware using odin.
get this app called phone info from the market "link"
check the bootloader : MF9, MDL, MK2
after that look for the firmware.tar that matches your bootloader file and flash it using odin, it will wipe your phone clean! once you get the samsung and sprint boot logo you may get stuck on that. since your phone is not longer rooted use the stock recovery " power + Vol up " to clean cache and do a data wipe. and reboot. once the phone boots you can root and start all over. :highfive:
Perfect thread : link
gabesir said:
check the bootloader you have and flash the .tar firmware using odin.
get this app called phone info from the market "link"
check the bootloader : MF9, MDL, MK2
after that look for the firmware.tar that matches your bootloader file and flash it using odin, it will wipe your phone clean! once you get the samsung and sprint boot logo you may get stuck on that. since your phone is not longer rooted use the stock recovery " power + Vol up " to clean cache and do a data wipe. and reboot. once the phone boots you can root and start all over. :highfive:
Perfect thread : link
Click to expand...
Click to collapse
i alreday did updated with the my bootloader version and its still same
my device bootloader version is L720VPUEMJA
is there any other way to fix?
imeis also null now
falak said:
i alreday did updated with the my bootloader version and its still same
my device bootloader version is L720VPUEMJA
is there any other way to fix?
imeis also null now
Click to expand...
Click to collapse
what baseband did you flash???
if you flash the .tar for MJA should restore your baseband. Try this tar file : here
gabesir said:
what baseband did you flash???
if you flash the .tar for MJA should restore your baseband. Try this tar file : here
Click to expand...
Click to collapse
already flashed with same files
L720VPUEMJA_L720SPTEMJA_SPR.zip
still same
falak said:
already flashed with same files
L720VPUEMJA_L720SPTEMJA_SPR.zip
still same
Click to expand...
Click to collapse
uhmm well last thing i would try is yo flash the MK2 tar back to stock and go from there.
here
Instructions:
1. Download tar.md5 from above and download Odin
2. Put phone into download mode (power off, then power button + Volume Down, then volume up when prompted)
3. Open Odin (right click > open as administrator)
4. Load stock tar into the PDA slot
5. Start flashing
6. Grab some popcorn because it will take a while
7. Profit
Hi, i have a problem when i try to install the custom recovery of philz. (The latest one for s4 6.53.9)
I have a samsung s4 black edition. I did all the steps on the guide, but when i install the custom recovery i only get "reset" on odin and nothing happened on the phone. On download mode it say that i have a custom firmware but the knox warranty flag has not tripped.
If anyone have an answer please help.
TenshiSenpai said:
Hi, i have a problem when i try to install the custom recovery of philz. (The latest one for s4 6.53.9)
I have a samsung s4 black edition. I did all the steps on the guide, but when i install the custom recovery i only get "reset" on odin and nothing happened on the phone. On download mode it say that i have a custom firmware but the knox warranty flag has not tripped.
If anyone have an answer please help.
Click to expand...
Click to collapse
Can you please link the guide you have followed?
What black edition version do you have? I9500 or I9505, i understand there are 2 versions depending on region.
Is the bootloader unlocked?
What version Odin are you using?
Remember to reboot into recovery by holding volume up while turning power on after flashing.
Holding volume down gives you download mode.
Did you put the recovery package in the PDA tab?
I use odin 3.07 and used the guide of philz. I tryed with auto reboot and without auto reboot on odin, i put the tar.md5 file on pda without anything else. The only other option ticked was f.reset time.
Sent from my GT-I9505 using XDA Free mobile app
Bump
Noone knows anything? Please help, I can't do anything with the phone in this state. I can't install the official firmware nor the recovery too.
Uncheck auto-reboot in Odin.
if problem persists:
Different usb cable
Different usb port
Make sure Kies is not running in the background.
Already done all that stuff,
Any other suggestions?
TenshiSenpai said:
Already done all that stuff,
Any other suggestions?
Click to expand...
Click to collapse
Hi,
You are using Odin 3.07 try with Odin 3.09
Download tar file again or a different one , is a new one for the I9505
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.55.0-jflte.zip.md5/
MAX 404 said:
Hi,
You are using Odin 3.07 try with Odin 3.09
Download tar file again or a different one , is a new one for the I9505
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.55.0-jflte.zip.md5/
Click to expand...
Click to collapse
In odin 3.07 I was putting the tar.md5 in PDA, where should I put it now? Because your file is in .zip.md5 and I can't put it in any slot.
TenshiSenpai said:
In odin 3.07 I was putting the tar.md5 in PDA, where should I put it now? Because your file is in .zip.md5 and I can't put it in any slot.
Click to expand...
Click to collapse
Hi,
Sorry that was the zip version , this is the tar version
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.53.9-jflte.tar.md5/
for I9505 international
Better use odin 3.09
MAX 404 said:
Hi,
Sorry that was the zip version , this is the tar version
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/jflte/philz_touch_6.53.9-jflte.tar.md5/
for I9505 international
Better use odin 3.09
Click to expand...
Click to collapse
I put it in Ap slot and then started but when it finish shows only reset and after few minutes without touching anything it change on Passed!
Then I unplugged the pone and tried home+vol up + power but it doesn't go in the recovery sistem menu
TenshiSenpai said:
I put it in Ap slot and then started but when it finish shows only reset and after few minutes without touching anything it change on Passed!
Then I unplugged the pone and tried home+vol up + power but it doesn't go in the recovery sistem menu
Click to expand...
Click to collapse
Remember to release the 3 button combination after the samsung logo shows up
MAX 404 said:
Remember to release the 3 button combination after the samsung logo shows up
Click to expand...
Click to collapse
thank you so much i tried to remove the outo reboot on odin and it worked, really thanks! just another information: with this recovery can i backup all my phone or i need to install another version?
TenshiSenpai said:
thank you so much i tried to remove the outo reboot on odin and it worked, really thanks! just another information: with this recovery can i backup all my phone or i need to install another version?
Click to expand...
Click to collapse
Glad is working
Yes you can make a nandroid , go to backup and restore choose your backup destination ( recommend external SD)
Hi,
I tried to load a new firmware from sam firmware. I download Odin 3.09 and I9515XXU1AND3 firmware. I followed all steps and when odin loads the system return an error. When i try to put on the phone I see "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again".
I tried again with Kies but does not found any interrupted update. I tried with Odin 3.09 and 3.07 with another firmware I9515XXU1ANG1 but no luck. Also I press reset button on Odin.
Now I think I need a .pit file because Odin does not found any partition.
Anyone can help me, please.
Thanks,
Catalin
[email protected] said:
Hi,
I tried to load a new firmware from sam firmware. I download Odin 3.09 and I9515XXU1AND3 firmware. I followed all steps and when odin loads the system return an error. When i try to put on the phone I see "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again".
I tried again with Kies but does not found any interrupted update. I tried with Odin 3.09 and 3.07 with another firmware I9515XXU1ANG1 but no luck. Also I press reset button on Odin.
Now I think I need a .pit file because Odin does not found any partition.
Anyone can help me, please.
Thanks,
Catalin
Click to expand...
Click to collapse
Is your phone going in download mode?
Plus were you trying to flash a furmware lower than 4.3 jellybean? Or 4.4 if you were on kitkat?
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Hi DeepankarS,
My phone is going in download mode. If I press power+vol down+back and after vol up ii's going in download mode. The phone runs KitKat. What should I do to revive it?
Thanks.
Is there any solution for my phone? Where I could find the pit file?
Thanks
[email protected] said:
Is there any solution for my phone? Where I could find the pit file?
Thanks
Click to expand...
Click to collapse
I've gt-i9515ve and faced with same situation. Try vol.up+power+back and enter recovery menü.
Then wipe to factory default.
This has solved my brick problem.
But I can not turn back to normal 9515ve firmware , I've installed a black edition firmware then phone starts to reboot at random times?
Sometimes when I'm talking with phone, problem occurs.
Any clue or help is appreciated?