Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Suprr said:
Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Click to expand...
Click to collapse
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
jmjoyas said:
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
Click to expand...
Click to collapse
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Suprr said:
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Click to expand...
Click to collapse
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Jmjoyas told me to flash the full tar version and No I do not.
Suprr said:
Jmjoyas told me to flash the full tar version and No I do not.
Click to expand...
Click to collapse
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
To be frank, I have not a clue of what any of those are.
Suprr said:
To be frank, I have not a clue of what any of those are.
Click to expand...
Click to collapse
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am flashing it right now. Let's hope it works.
EDIT:
Flashed the full tar version for mk2 to no avail via Odin
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
I flashed from this thread and this line:
http://forum.xda-developers.com/showthread.php?t=2700726
To return to factory stock MK2 flash the I337_MK2_Full_Odin tar
Click to expand...
Click to collapse
Suprr said:
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
Click to expand...
Click to collapse
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I love you. thank you so much.
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Suprr said:
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Click to expand...
Click to collapse
You're on mk2 firmware now. You'll need to root it using safe root and then put safestrap on in order to flash that rom. Look in the general forum for index, all thing mk2 and nb1. There's a lot of info there so read it carefully
Sent from my Nexus 5 using XDA Free mobile app
Related
So, first, I'm running the stock 4.2.2 rooted on the ATT SGH-I337.
I installed ROM manager shortly after the root, and recently downloaded CM 10.1.3 for the att model of my phone. However, I couldn't find it in the recovery system to flash it. So, I install goomanager and flash over to TWRP, thinking maybe TWRP's easier interface will help me to find it. I reboot into recovery, and if I attempt to enter recovery mode, it gets stuck on the "Downlaoding, do not turn off target" screen. So, I re-flash CWM back on it, and reboot to recovery, and get stuck on that same screen again. If I just boot it, it's fine, jumps right back into 4.2.2 TouchWiz rooted. However, as you probably know, I can't install a ROM without recovery mode, and stock TouchWiz is poo.
I'd like to get CM running asap, although I'm just glad my phone still RUNS for now (my experience installing CM on my S3 was a NIGHTMARE).
So yea, any reason I would be getting stuck on that screen and unable to enter recovery? Like I said, I'd like to have CM as soon as I can.
Also, if someone can link me to a guide to install through CWM w\o needing a computer, that'd be wonderful. Thanks!
I'm assuming you're running on the MF3 build version. Read up before you brick your device. Your only option for a custom recovery is safestrap. Come on people.
Cheers.
Not another one. http://forum.xda-developers.com/showthread.php?p=46363132
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Not another one. http://forum.xda-developers.com/showthread.php?p=46363132
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Jd1639
You are a good person buddy,I only hope he reads the link you provided cause I'm thinking he didnt read past rooting.WOW!
Sent from my SAMSUNG-SGH-I337 using xda premium
Well that sucks. Bit wait. Why was I able to boot into cwm At least 5 times before I flashed TWRP. And several people on YouTube are using TWRP on my same model.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ryno9100 said:
Well that sucks. Bit wait. Why was I able to boot into cwm At least 5 times before I flashed TWRP. And several people on YouTube are using TWRP on my same model.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
What firmware version do you have. Look at the last three characters of your build number
jd1639 said:
What firmware version do you have. Look at the last three characters of your build number
Click to expand...
Click to collapse
It's MF3
ryno9100 said:
It's MF3
Click to expand...
Click to collapse
You never saw twrp. You saw the stock recovery. Mf3 won't allow a custom recovery.
Edit, you did see an i337 in the you tube vids, but it had mdl or mdb firmware. You can put a custom recovery on with them. Unfortunately it's not possible to downgrade the firmware.
jball said:
Jd1639
You are a good person buddy,I only hope he reads the link you provided cause I'm thinking he didnt read past rooting.WOW!
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
And also, I did, in fact, read past rooting, and found several people running CWM and TWRP fine, so I figured it would work. Now maybe they didn't have MF3,and I wasn't paying extremely close attention, but I'm pretty sure there were some on the same model and firmware as I am.
jd1639 said:
You never saw twrp. You saw the stock recovery. Mf3 won't allow a custom recovery.
Edit, you did see an i337 in the you tube vids, but it had mdl or mdb firmware. You can put a custom recovery on with them. Unfortunately it's not possible to downgrade the firmware.
Click to expand...
Click to collapse
So, at this point, it's a waiting game for someone to find out how to put a recovery mode on an MF3 firmware, is what you're telling me?
Also, I may have been in stock. I don't remember EXACTLY what clockwork looked like. I just know it wouldn't let me select the gapps and CM files,which is why I tried TWRP. Though I did have CWM recovery flashed when I booted it into recovery those several times.
Dude you never booted CWM. That was MF3s stock recovery. MF3 does not allow any custom recovery but Safestrap.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
So, I am still running MF9. I am rooted, and sporting a custom rom, albeit a fairly old one: Sacs_Custom 4.X with the included kernal. I want to flash a newer rom, especially since new bugs are starting to crop up. I know that newer ones are on MJA (right?) and are based on 4.3 or 4.4. So, assuming I have selected my Rom, can I simply factory reset and then flash the new rom? Or do I need to take factory updates after reset, then re-root the device to flash these newer roms?
Go get the MK2 modem without the bootloader from development section. Odin it and flash whatever ROM your heart desires
Sent from my SPH-L720 using Tapatalk
Here's a good place to start...
http://forum.xda-developers.com/showthread.php?t=2277480
bgibs1 said:
Here's a good place to start...
http://forum.xda-developers.com/showthread.php?t=2277480
Click to expand...
Click to collapse
This seems very helpful, and I will tackle it as soon as my battery recharges. The one thing I want to be sure about first...I of course have TWRP recovery installed already. Flashing Philz without removing it (I assume Philz would overwrite it?) is fine, right?
beerindex said:
This seems very helpful, and I will tackle it as soon as my battery recharges. The one thing I want to be sure about first...I of course have TWRP recovery installed already. Flashing Philz without removing it (I assume Philz would overwrite it?) is fine, right?
Click to expand...
Click to collapse
Yup, here is the link to the newest Philz
http://d-h.st/fGN
You can flash Philz right through TWRP and vise versa. Flash, wipe cache and dalvik if you want. Reboot to recovery and it'll change.
Sent from my SPH-L720 using xda app-developers app
also wanting to update
So I'm in the same boat, I'm running triforce mf9.
If I'm understanding this right I should;
-flash philz(which I can do from twrp?)
-Then I can flash triforce's new mja?
That seems a little too easy with how complex http://forum.xda-developers.com/showthread.php?t=2277480 seems.
seanwn86 said:
So I'm in the same boat, I'm running triforce mf9.
If I'm understanding this right I should;
-flash philz(which I can do from twrp?)
-Then I can flash triforce's new mja?
That seems a little too easy with how complex http://forum.xda-developers.com/showthread.php?t=2277480 seems.
Click to expand...
Click to collapse
It depends on if you want to keep mf9 as your bootloader and knox out of your hardware. If you want a little more flexibility in the long run, use the guide you linked to. If you don't care about your bootloader then follow the steps in this thread
Sent from my Nexus 7 using XDA Premium 4 mobile app
seanwn86 said:
So I'm in the same boat, I'm running triforce mf9.
If I'm understanding this right I should;
-flash philz(which I can do from twrp?)
-Then I can flash triforce's new mja?
That seems a little too easy with how complex http://forum.xda-developers.com/showthread.php?t=2277480 seems.
Click to expand...
Click to collapse
I used odin to flash unknownforce's mk2 firmware. And flashed the TriforceV5 with the latest TWRP no problem. Made backups, switched between roms. Super easy.
Sent from my SPH-L720 using xda app-developers app
imbmiller said:
It depends on if you want to keep mf9 as your bootloader and knox out of your hardware. If you want a little more flexibility in the long run, use the guide you linked to. If you don't care about your bootloader then follow the steps in this thread
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
HPferoxCraft said:
I used odin to flash unknownforce's mk2 firmware. And flashed the TriforceV5 with the latest TWRP no problem. Made backups, switched between roms. Super easy.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
How do I check/verify my bootloader after I update?
HPferoxCraft; did you keep mf9 bootloader?
I flashed philz recovery, and was going to odin the mk2 firmware, then flash triforceV5. Just want to double check before I do this.
seanwn86 said:
How do I check/verify my bootloader after I update?
HPferoxCraft; did you keep mf9 bootloader?
I flashed philz recovery, and was going to odin the mk2 firmware, then flash triforceV5. Just want to double check before I do this.
Click to expand...
Click to collapse
Hey. I did keep it for a bit. Until I set everything up and made backups and ran it for awhile. Then curiosity had me update to mk2. Every things running fine/better connection. Seeing 4g more where I see 3g normally.
Sent from my SPH-L720 using xda app-developers app
So I'm updated now, but it appears I've lost SuperSU.
I open mybackuppro, it says I'm rooted, and asks if I want to ask for super user permission. But SuperSU never pops up, and I don't see it in the app drawer.
Thoughts, ideas?
seanwn86 said:
So I'm updated now, but it appears I've lost SuperSU.
I open mybackuppro, it says I'm rooted, and asks if I want to ask for super user permission. But SuperSU never pops up, and I don't see it in the app drawer.
Thoughts, ideas?
Click to expand...
Click to collapse
Try flashing the supersu zip found here http://forum.xda-developers.com/showthread.php?t=1538053 in recovery and you should be good to go.
imbmiller said:
Try flashing the supersu zip found here http://forum.xda-developers.com/showthread.php?t=1538053 in recovery and you should be good to go.
Click to expand...
Click to collapse
Thank you very much. Downloading/flashing now.
Minor question, what's the difference between this and the super user that I had before that had like a superman triangle logo?
Hey all, I just acquired the SGH-I337 as an upgrade to my Galaxy S3. I can not for the life of me get a custom ROM running on it. My goal is SlimKAT because I like the ROM and have been using it on every phone since my Samsung Vibrant. Any time I'm flashing something in ODIN that has anything to do with ABOOT, it fails, soft bricks the device, and I have to reflash in ODIN all over again.
Please let me know what information I can provide to help with this. I've never had so much trouble with a phone before.
zeusakatkm said:
Hey all, I just acquired the SGH-I337 as an upgrade to my Galaxy S3. I can not for the life of me get a custom ROM running on it. My goal is SlimKAT because I like the ROM and have been using it on every phone since my Samsung Vibrant. Any time I'm flashing something in ODIN that has anything to do with ABOOT, it fails, soft bricks the device, and I have to reflash in ODIN all over again.
Please let me know what information I can provide to help with this. I've never had so much trouble with a phone before.
Click to expand...
Click to collapse
Please tell us the firmware of your phone (baseband, modem, etc..)
I337 has locked bootloader if your firmware is MF3 and above (MK2, NB1, NC1). You have to use the safestrap as a recovery if you want to flash the custom roms. If you want to flash SlimKAT you have to the SlimKAT safestrap version if they have one.
If he had to use Safestrap he can't use Slimkat as it's AOSP and he can't change the kernel. Chances are if he was getting issues flashing aboot then he's on a newer version. Confirm it in the about phone section of the settings though.
Sent from my SGH-I337 running GPE
I believe when I got the phone, it was updated all the way. Although I'm not entirely sure what the latest firmware is. I tried using Odin to go back, which worked sort of
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
zeusakatkm said:
I believe when I got the phone, it was updated all the way. Although I'm not entirely sure what the latest firmware is. I tried using Odin to go back, which worked sort of
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can't go back to older bootloaders ever. Sounds like you are updated to something that you can't flash custom anything to. So safestrap is the only way to go with modded touchwiz based roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
drock212 said:
You can't go back to older bootloaders ever. Sounds like you are updated to something that you can't flash custom anything to. So safestrap is the only way to go with modded touchwiz based roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was able to successfully unbrick the phone by using Odin to get it to MK2, although Wifi didn't work. Now I'm trying to get it back to the latest firmware so that I can sell it.
UPDATE!
Phone had been successfully reflashed to firmware NB1, with everything seemingly working. This phone seems so much more complicated than the S3 was, thanks locked bootloader.
zeusakatkm said:
I was able to successfully unbrick the phone by using Odin to get it to MK2, although Wifi didn't work. Now I'm trying to get it back to the latest firmware so that I can sell it.
UPDATE!
Phone had been successfully reflashed to firmware NB1, with everything seemingly working. This phone seems so much more complicated than the S3 was, thanks locked bootloader.
Click to expand...
Click to collapse
use this to get to the NB1 firmware then take the NC1 OTA
http://forum.xda-developers.com/showthread.php?t=2674223
shamelin73 said:
use this to get to the NB1 firmware then take the NC1 OTA
http://forum.xda-developers.com/showthread.php?t=2674223
Click to expand...
Click to collapse
Does it matter if I use the rootable version?
I would use the non root one then let phone take the NC1 OTA update.
That shod give you a clean slate to sell the phone or you can root NC1 with towelroot
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I've already flashed the stock one, but it says there is no software update available
I've already flashed the stock one, but it says there is no software update available
UPDATE!
Success! I am successfully running this rom
http://forum.xda-developers.com/showthread.php?t=2767026
OK. I'm trying to install cyanogen mod on my at&t gs4. I am new to root, obviously. I've been watching wwjoshdew do a 30 minute install video that seems to go really in depth but my problem lies with the custom recovery I installed, PhilZ. I installed extracted it and tried doing a manual recovery. I got the message software found on your system has not been authorized by at&t or something similar to that. I took out my battery and booted up into download mode and hit start device normally or whatever it says exactly. Then I tried using a flasher from the play store and same thing. I would like a fix to this (without Odin if possible). I am afraid to continue without help to avoid bricking my phone.
Thank you.
Hopefully I don't sound too stupid
Do you know what firmware version you're on? Most likely it's a newer version which does not support a custom recovery other than safestrap. And m most likely you will need Odin
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
Do you know what firmware version you're on? Most likely it's a newer version which does not support a custom recovery other than safestrap. And m most likely you will need Odin
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I'm on 4.4.2
Mojo-jojo25 said:
I'm on 4.4.2
Click to expand...
Click to collapse
I thought so. And you've learned, you can not flash a custom recovery on your phone. You'll need to flash this in Odin to get your phone running again
http://forum.xda-developers.com/showthread.php?p=50912149
Then look in the general forum for all things att..... (edit http://forum.xda-developers.com/showthread.php?p=53758227) read that. Safestrap is the only recovery you can use on that firmware version
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
My device is on the factory ucuamdl bootloader and I was using SkyFall rom SF_UCUFNI1 for some time without any problems. I always use GoogyMax3 TW kernels flashing with Phliz touch recovery. A couple of day's ago I wanted to try a Ktoonsez 4.4 TW kernel and while flashing it the android guy with tools coming out appeared in recovery then I re-flashed Googy and rebooted the phone. When I try to get into recovery I only get a black screen and the battery keeps vibrating over and over. However I can get my device into download mode and tried flashing my factory AMDL using Odin 3.09 to try and reset everything. It say's that everything passed in green and reboots but Samsung's logo doesn't appear on screen with no os starting up, it's all in black showing nothing. However while in download mode it still reports that my system status is custom and binary is Samsung official. Can anyone please help because I'm at a lost with this.
gods_archangel said:
My device is on the factory ucuamdl bootloader and I was using SkyFall rom SF_UCUFNI1 for some time without any problems. I always use GoogyMax3 TW kernels flashing with Phliz touch recovery. A couple of day's ago I wanted to try a Ktoonsez 4.4 TW kernel and while flashing it the android guy with tools coming out appeared in recovery then I re-flashed Googy and rebooted the phone. When I try to get into recovery I only get a black screen and the battery keeps vibrating over and over. However I can get my device into download mode and tried flashing my factory AMDL using Odin 3.09 to try and reset everything. It say's that everything passed in green and reboots but Samsung's logo doesn't appear on screen with no os starting up, it's all in black showing nothing. However while in download mode it still reports that my system status is custom and binary is Samsung official. Can anyone please help because I'm at a lost with this.
Click to expand...
Click to collapse
Ok, it doesn't sound good but a couple of things, do you have a link to the ktoonsez kernel you flashed? Also, have you tried re-downloading the mdl firmware and trying that. The good news is you can still get into download mode
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Ok, it doesn't sound good but a couple of things, do you have a link to the ktoonsez kernel you flashed? Also, have you tried re-downloading the mdl firmware and trying that. The good news is you can still get into download mode
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I'm looking for it right now.
jd1639 said:
Ok, it doesn't sound good but a couple of things, do you have a link to the ktoonsez kernel you flashed? Also, have you tried re-downloading the mdl firmware and trying that. The good news is you can still get into download mode
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1756776
http://forum.xda-developers.com/showthread.php?t=1756776
gods_archangel said:
http://forum.xda-developers.com/showthread.php?t=1756776
http://forum.xda-developers.com/showthread.php?t=1756776
Click to expand...
Click to collapse
That looks like it's for the s3 not the s4. It's never good to flash a kernel not for your device. I would try Odin again but flashing a kernel not for your device almost always bricks it. You'll probably have to check out mobiltechvidoes.com. They can jtag it.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Ok, it doesn't sound good but a couple of things, do you have a link to the ktoonsez kernel you flashed? Also, have you tried re-downloading the mdl firmware and trying that. The good news is you can still get into download mode
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I forgot to mention that I was using modem UCUFNI1 with the SkyFall rom. My mdl firmware is fine because I used it before to reset.
jd1639 said:
That looks like it's for the s3 not the s4. It's never good to flash a kernel not for your device. I would try Odin again but flashing a kernel not for your device almost always bricks it. You'll probably have to check out mobiltechvidoes.com. They can jtag it.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Yes I just noticed it's for the Galaxy S3.
jd1639 said:
Ok, it doesn't sound good but a couple of things, do you have a link to the ktoonsez kernel you flashed? Also, have you tried re-downloading the mdl firmware and trying that. The good news is you can still get into download mode
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Can you make a tar file and I'll try flashing my GoogyMax TW kernel using Odin?
http://forum.xda-developers.com/showthread.php?t=2741181