[Q] can't flash recovery - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

OK. I'm trying to install cyanogen mod on my at&t gs4. I am new to root, obviously. I've been watching wwjoshdew do a 30 minute install video that seems to go really in depth but my problem lies with the custom recovery I installed, PhilZ. I installed extracted it and tried doing a manual recovery. I got the message software found on your system has not been authorized by at&t or something similar to that. I took out my battery and booted up into download mode and hit start device normally or whatever it says exactly. Then I tried using a flasher from the play store and same thing. I would like a fix to this (without Odin if possible). I am afraid to continue without help to avoid bricking my phone.
Thank you.
Hopefully I don't sound too stupid

Do you know what firmware version you're on? Most likely it's a newer version which does not support a custom recovery other than safestrap. And m most likely you will need Odin
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app

jd1639 said:
Do you know what firmware version you're on? Most likely it's a newer version which does not support a custom recovery other than safestrap. And m most likely you will need Odin
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I'm on 4.4.2

Mojo-jojo25 said:
I'm on 4.4.2
Click to expand...
Click to collapse
I thought so. And you've learned, you can not flash a custom recovery on your phone. You'll need to flash this in Odin to get your phone running again
http://forum.xda-developers.com/showthread.php?p=50912149
Then look in the general forum for all things att..... (edit http://forum.xda-developers.com/showthread.php?p=53758227) read that. Safestrap is the only recovery you can use on that firmware version
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app

Related

Galaxy S4 Recovery mode not working

So, first, I'm running the stock 4.2.2 rooted on the ATT SGH-I337.
I installed ROM manager shortly after the root, and recently downloaded CM 10.1.3 for the att model of my phone. However, I couldn't find it in the recovery system to flash it. So, I install goomanager and flash over to TWRP, thinking maybe TWRP's easier interface will help me to find it. I reboot into recovery, and if I attempt to enter recovery mode, it gets stuck on the "Downlaoding, do not turn off target" screen. So, I re-flash CWM back on it, and reboot to recovery, and get stuck on that same screen again. If I just boot it, it's fine, jumps right back into 4.2.2 TouchWiz rooted. However, as you probably know, I can't install a ROM without recovery mode, and stock TouchWiz is poo.
I'd like to get CM running asap, although I'm just glad my phone still RUNS for now (my experience installing CM on my S3 was a NIGHTMARE).
So yea, any reason I would be getting stuck on that screen and unable to enter recovery? Like I said, I'd like to have CM as soon as I can.
Also, if someone can link me to a guide to install through CWM w\o needing a computer, that'd be wonderful. Thanks!
I'm assuming you're running on the MF3 build version. Read up before you brick your device. Your only option for a custom recovery is safestrap. Come on people.
Cheers.
Not another one. http://forum.xda-developers.com/showthread.php?p=46363132
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
jd1639 said:
Not another one. http://forum.xda-developers.com/showthread.php?p=46363132
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Jd1639
You are a good person buddy,I only hope he reads the link you provided cause I'm thinking he didnt read past rooting.WOW!
Sent from my SAMSUNG-SGH-I337 using xda premium
Well that sucks. Bit wait. Why was I able to boot into cwm At least 5 times before I flashed TWRP. And several people on YouTube are using TWRP on my same model.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
ryno9100 said:
Well that sucks. Bit wait. Why was I able to boot into cwm At least 5 times before I flashed TWRP. And several people on YouTube are using TWRP on my same model.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
What firmware version do you have. Look at the last three characters of your build number
jd1639 said:
What firmware version do you have. Look at the last three characters of your build number
Click to expand...
Click to collapse
It's MF3
ryno9100 said:
It's MF3
Click to expand...
Click to collapse
You never saw twrp. You saw the stock recovery. Mf3 won't allow a custom recovery.
Edit, you did see an i337 in the you tube vids, but it had mdl or mdb firmware. You can put a custom recovery on with them. Unfortunately it's not possible to downgrade the firmware.
jball said:
Jd1639
You are a good person buddy,I only hope he reads the link you provided cause I'm thinking he didnt read past rooting.WOW!
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
And also, I did, in fact, read past rooting, and found several people running CWM and TWRP fine, so I figured it would work. Now maybe they didn't have MF3,and I wasn't paying extremely close attention, but I'm pretty sure there were some on the same model and firmware as I am.
jd1639 said:
You never saw twrp. You saw the stock recovery. Mf3 won't allow a custom recovery.
Edit, you did see an i337 in the you tube vids, but it had mdl or mdb firmware. You can put a custom recovery on with them. Unfortunately it's not possible to downgrade the firmware.
Click to expand...
Click to collapse
So, at this point, it's a waiting game for someone to find out how to put a recovery mode on an MF3 firmware, is what you're telling me?
Also, I may have been in stock. I don't remember EXACTLY what clockwork looked like. I just know it wouldn't let me select the gapps and CM files,which is why I tried TWRP. Though I did have CWM recovery flashed when I booted it into recovery those several times.
Dude you never booted CWM. That was MF3s stock recovery. MF3 does not allow any custom recovery but Safestrap.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

[Q] Bricked i337 -- URGENT

Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Suprr said:
Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Click to expand...
Click to collapse
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
jmjoyas said:
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
Click to expand...
Click to collapse
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Suprr said:
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Click to expand...
Click to collapse
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Jmjoyas told me to flash the full tar version and No I do not.
Suprr said:
Jmjoyas told me to flash the full tar version and No I do not.
Click to expand...
Click to collapse
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
To be frank, I have not a clue of what any of those are.
Suprr said:
To be frank, I have not a clue of what any of those are.
Click to expand...
Click to collapse
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am flashing it right now. Let's hope it works.
EDIT:
Flashed the full tar version for mk2 to no avail via Odin
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
I flashed from this thread and this line:
http://forum.xda-developers.com/showthread.php?t=2700726
To return to factory stock MK2 flash the I337_MK2_Full_Odin tar
Click to expand...
Click to collapse
Suprr said:
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
Click to expand...
Click to collapse
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I love you. thank you so much.
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Suprr said:
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Click to expand...
Click to collapse
You're on mk2 firmware now. You'll need to root it using safe root and then put safestrap on in order to flash that rom. Look in the general forum for index, all thing mk2 and nb1. There's a lot of info there so read it carefully
Sent from my Nexus 5 using XDA Free mobile app

[Q] Bootloader unlock Galaxy s4 sgh-i337 4.4.2 kitkat

I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
RockRatt said:
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Click to expand...
Click to collapse
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
patstar5 said:
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
Click to expand...
Click to collapse
There's one partially working Google Play edition rom, but otherwise, no.
This makes me truly sad. I was so looking forward to possibly flashing these ROMS and now...I have to get it my time machine and go backwards lol whenever I find the time to figure the downgrading thing out. Sounds to me like I'll be happier when I do find the time.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
There is no way going back to the older bootloader. The only way to go back would be to find an older S4 on eBay etc. with the old BL
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
All the post below are correct except being able to go back to firmware with an unlocked boot loader.. Install safestrap 3.72 and install recovery. You will get a Twrp recovery .. dont try flashing custom kernels ..It might flash but none of the setting such as overclock etc. will work .nor will you be on that kernel version afterwrds .. I guess the simple answer is no for cwm and aosp roms .. You will be only able too flash custom stock roms
Wifi issues with towelrooted gs4
First off this may not be the right place for this (first time poster), and if so, either please help me in finding the right forum or forgive my ignorance.
I rooted my galaxy s4 today, and I have found that when I am trying to use wifi I am unable to connect to some pages. Using chrome I am unable to load google.com, or google anything directly from the search bar. And the app imgur also doesn't load whilst on wifi, but if I switch to my cell network they load just fine. If I had unlimited data of course this would not be an issue, but that is not the case and therefore I come to this forum and hope that someone can help me out!
My s4 is an at&t i337. I would amazingly, greatly appreciate any help!
Much thanks in advance!
lost recovery with unlocked bootloader
Hello,
longtime flasher here, not as familiar with gs4.
My girl has a sgh-i337 that has been bootloader unlocked since day one. Been on TWRP and slim rom the whole time too.
I was wiping Cache, Dalvik Cache, and System prior to doing a rom update and TWRP glitched out while updating partition after the final wipe operation. Screen went black. Boots to download mode only.Will not boot rom (as system was wiped) but shows the samsung custom unlocked logo. When in download (odin) mode, I see product name: sgh-1337, Current Binary: Samsung Official, System Status: Custom CSB_OEM_LSB: 0x30 Write Protection: enable
universal android toolkit will not show device connected so Installation of custom recovery through toolkit fails. ADB will not show device connected. ODIN will show device connected, though.
To recover with odin, can I flash the I337UCUAMDL from sammobile and retain unlocked bootloader?
Thanks for any and all help.
What is the bootloader version you need to unlock? I have 4.2.2 Red ATT S4, Baseband Version : I337UCUAMF3 / BUILD: JDQ39 , if i was able to unlock how would i go about doing so? I was hoping i could do something with Loki if not? How does Loki work exactly as well?
Congrats, you just voided your warranty. It will be 0x1 instead of 0x0.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Just FYI for you guys hijacking the thread. It is usually better for you if you start your own thread. Most people skim these threads and may lose track of who they were helping or give bad info to you thinking they were replying to the original question. Or, just skip the thread if they don't think the OP tiltle interests them.
You will get more direct answers and quicker help if you do. Or try to post here--
http://forum.xda-developers.com/showthread.php?t=2320430
Just trying to get you faster and more accurate responses--:good:
How did you root S4?
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
th3doorMATT said:
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Using Odin 3.10
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
th3doorMATT said:
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
Click to expand...
Click to collapse
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
Hmmm. I still don't know why it fails but when I get home I'll have to let you know. I've deleted several after failing. I'm sure I can find them again and I think I still have a few as well so I'll let you know.
CF Auto Root and Towelroot
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I've used both CF Auto Root, Towelroot, and Motochopper guides and none of them have worked.
The only file I have on my computer is: philz_touch_6.08.9-jflteatt.tar.md5 as one of the files I used but that didn't work. I actually had already downloaded the files from the article you had linked but I didn't get around to it yet, I'm going to try that method out in about 15-30mins and see what happens.
It worked!
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Followed everything on that post and it worked! I'm rooted!
Though I'm not sure if you know about custom recoveries. I'm having issues with installing any of them and having it work. I am currently trying Safestrap and for some reason it won't install the recovery. It'll go through the process, but the state of the recovery won't change or anything.
I ultimately want to install CM11, but I'm really struggling to find a way that works!
unlocked bootloader.....
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
I still can't figure how to install the .apk file from kingroot..? How do you install the file to root it..?

Throwing in the towel, I need help.

Hey all, I just acquired the SGH-I337 as an upgrade to my Galaxy S3. I can not for the life of me get a custom ROM running on it. My goal is SlimKAT because I like the ROM and have been using it on every phone since my Samsung Vibrant. Any time I'm flashing something in ODIN that has anything to do with ABOOT, it fails, soft bricks the device, and I have to reflash in ODIN all over again.
Please let me know what information I can provide to help with this. I've never had so much trouble with a phone before.
zeusakatkm said:
Hey all, I just acquired the SGH-I337 as an upgrade to my Galaxy S3. I can not for the life of me get a custom ROM running on it. My goal is SlimKAT because I like the ROM and have been using it on every phone since my Samsung Vibrant. Any time I'm flashing something in ODIN that has anything to do with ABOOT, it fails, soft bricks the device, and I have to reflash in ODIN all over again.
Please let me know what information I can provide to help with this. I've never had so much trouble with a phone before.
Click to expand...
Click to collapse
Please tell us the firmware of your phone (baseband, modem, etc..)
I337 has locked bootloader if your firmware is MF3 and above (MK2, NB1, NC1). You have to use the safestrap as a recovery if you want to flash the custom roms. If you want to flash SlimKAT you have to the SlimKAT safestrap version if they have one.
If he had to use Safestrap he can't use Slimkat as it's AOSP and he can't change the kernel. Chances are if he was getting issues flashing aboot then he's on a newer version. Confirm it in the about phone section of the settings though.
Sent from my SGH-I337 running GPE
I believe when I got the phone, it was updated all the way. Although I'm not entirely sure what the latest firmware is. I tried using Odin to go back, which worked sort of
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
zeusakatkm said:
I believe when I got the phone, it was updated all the way. Although I'm not entirely sure what the latest firmware is. I tried using Odin to go back, which worked sort of
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can't go back to older bootloaders ever. Sounds like you are updated to something that you can't flash custom anything to. So safestrap is the only way to go with modded touchwiz based roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
drock212 said:
You can't go back to older bootloaders ever. Sounds like you are updated to something that you can't flash custom anything to. So safestrap is the only way to go with modded touchwiz based roms.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was able to successfully unbrick the phone by using Odin to get it to MK2, although Wifi didn't work. Now I'm trying to get it back to the latest firmware so that I can sell it.
UPDATE!
Phone had been successfully reflashed to firmware NB1, with everything seemingly working. This phone seems so much more complicated than the S3 was, thanks locked bootloader.
zeusakatkm said:
I was able to successfully unbrick the phone by using Odin to get it to MK2, although Wifi didn't work. Now I'm trying to get it back to the latest firmware so that I can sell it.
UPDATE!
Phone had been successfully reflashed to firmware NB1, with everything seemingly working. This phone seems so much more complicated than the S3 was, thanks locked bootloader.
Click to expand...
Click to collapse
use this to get to the NB1 firmware then take the NC1 OTA
http://forum.xda-developers.com/showthread.php?t=2674223
shamelin73 said:
use this to get to the NB1 firmware then take the NC1 OTA
http://forum.xda-developers.com/showthread.php?t=2674223
Click to expand...
Click to collapse
Does it matter if I use the rootable version?
I would use the non root one then let phone take the NC1 OTA update.
That shod give you a clean slate to sell the phone or you can root NC1 with towelroot
Sent from my SAMSUNG-SGH-I337 using Tapatalk
I've already flashed the stock one, but it says there is no software update available
I've already flashed the stock one, but it says there is no software update available
UPDATE!
Success! I am successfully running this rom
http://forum.xda-developers.com/showthread.php?t=2767026

How To Install Custom ROM on AT&T/Verizon Galaxy S4 using SafeStrap Recovery!

I have a problem....even dought I boot on Partition 1, just created, it says :
E: Unable to mount '/systemorig'
Worst part is...it let me do the installing procces of the Hyperdrive+RLS9.1+S4+Final and then...doesn't boot.
My Phone is : S4 Active SGH-i537 from At&T Unlocked and rooted.
Android 4.4.2
UCUAMF1
UCUCNE3
Can you help me please?
Thanks in advanced!
Try to odin to stock (make sure you get the correct files), root, install SafeStrap following the instructions here: http://forum.xda-developers.com/showthread.php?t=2448942
After that you need to flash the rom, kernel modules (you can get them here: http://forum.xda-developers.com/showthread.php?t=2447764), then after that you flash SuperSU (if you don't have that file then here it is: http://forum.xda-developers.com/showthread.php?t=1538053 DO THESE STEPS I JUST SAID IN THE SAME ORDER LISTED HERE: Flash ROM, correct kernel modules, and then SuperSu.)
If the same error ocurrs then it's most likely the rom just isn't compatible with you device. Also, make sure it's an S4 Active rom not a normal S4 rom.
NOTE: I do not own an Active, but doing some 5 minute research is what helped me figure this out for your device.
Ok, I´ll try! Sorry, but everything I did before, unsuscefully is the result of many hours of forum research......problem is....I don´t know a lot about this....yes, probably shouldn´t mess with it, but truth is I live in Argentina, and wifi + bluetooth stop working with stock rom....no matter how many times I hard reset it so I figured changing rom might solve it........
I went to through the same you're going through with my S4. I ended up flashing the wrong Odin files like 5 times before I figured out what file to flash, lol. Glad to help
Sent from my SGH-I337 using XDA Free mobile app
Sterben Pistole said:
I went to through the same you're going through with my S4. I ended up flashing the wrong Odin files like 5 times before I figured out what file to flash, lol. Glad to help
Sent from my SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
after you flash with safetrap, does the kernel have to be flash with safetrap or with Odin? i did root my GS4 using Odin and have the I337_NJ4_Stock_Kernel. can i use that one or do i need to download any other tipe of kernel??
You need to flash the kernel modules via SafeStrap. The NJ4 modules (and other modules) can be downloaded from here: http://forum.xda-developers.com/showthread.php?t=2616221 navigate down to the KitKat Install instructions, look for step 4 (Install ATT Kernel Modules), in the first sentence click the hyper link redirecting you to AndroidFileHost, and then download the corresponding Kernel Modules to FLASH DIRECRLY AFTER EVERY ROM YOU FLASH.
THE FILES LINKED ARE FOR NORMAL S4 ONLY.
Sent from my SGH-I337 using XDA Free mobile app
Those two things are different...
You can only flash the nj4 kernel via Odin using the ap slot. I'm not sure if safestrap can flash kernels, because we're not meant to or we would be using twrp.
The nj4 modules should be flashed along with what ROM you're using during use of safestrap.
I was referring to the stock kernel modules (what I linked him/her to) needed to be flashed after the ROM each time. Also in SafeStrap, can't you flash stock kernels? I'm pretty sure you can. If not then I'm just crazy lol.
Sent from my SGH-I337 using XDA Free mobile app
Sterben Pistole said:
I went to through the same you're going through with my S4. I ended up flashing the wrong Odin files like 5 times before I figured out what file to flash, lol. Glad to help
Sent from my SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
My Safestrap isný working properly, when I make the slot-1 it shows, :
E: Unable to mount '/systemorig'
Then When I wipe same thing, even that I boot in it
Worst thing....it tells me everything is done, I flash the rom and of course then...never starts....
And wich Rom could you finally use? My Phone is : S4 Active SGH-i537 from At&T Unlocked and rooted.
Android 4.4.2
UCUAMF1
UCUCNE3
Thanks!!
You need to use the Stock slot. Any other slot causes errors on most roms, and how do you have two bootloader versions? I'm thinking that MF1 is your BL and NE3 is baseband or something.
Sent from my SGH-I337 using XDA Free mobile app
Do not use Safestrap...you have an unlocked bootloader and have no need for it.
It will not work well with an unlocked phone like you have as the recovery is designed for locked US based carriers.
I think he means that he's SIM unlocked. I'm not sure they have an unlocked BL for the Active. If they do, then he should go ahead and use TWRP or CWM.
Sent from my SGH-I337 using XDA Free mobile app

Categories

Resources