[Q] Help on custom ROM and the knox 0x1 workaround - Galaxy S 4 Q&A, Help & Troubleshooting

Hi XDAers,
I just have an i9505 carrier locked with Globe telecoms (Phil). I rooted via ODIN and Clockwork 6.0.4.7 via ODIN as well. I was impatient and I later realized that this KNOX thing is 0x1 on my phone. Does this Knox tripped thing do anything with messing up with my future use of custom roms? I am on 4.2.2 with baseband ver i9505xxubmg5. I want to use custom ROMS with 4.4.2 like Arrow ROM or the likes. I am actually lost here. I dont know whether this KNOX will mess up the functionality of my phone. How do I proceed in installing custom ROMS? Since I am rooted and have clockwork installed should I justt go ahead and download custom zipped ROMS and install? I used to have i9000 Galaxy S, and I was using custom all the way and now that I got my phone replaced with this i9505.. I think I cant live with a stocked based ROM. What are the disadvantages of having KNOX 0x1? Will I not be able to use custom roms without problems?

MasterYodaMD said:
Hi XDAers,
I just have an i9505 carrier locked with Globe telecoms (Phil). I rooted via ODIN and Clockwork 6.0.4.7 via ODIN as well. I was impatient and I later realized that this KNOX thing is 0x1 on my phone. Does this Knox tripped thing do anything with messing up with my future use of custom roms? I am on 4.2.2 with baseband ver i9505xxubmg5. I want to use custom ROMS with 4.4.2 like Arrow ROM or the likes. I am actually lost here. I dont know whether this KNOX will mess up the functionality of my phone. How do I proceed in installing custom ROMS? Since I am rooted and have clockwork installed should I justt go ahead and download custom zipped ROMS and install? I used to have i9000 Galaxy S, and I was using custom all the way and now that I got my phone replaced with this i9505.. I think I cant live with a stocked based ROM. What are the disadvantages of having KNOX 0x1? Will I not be able to use custom roms without problems?
Click to expand...
Click to collapse
Knox o×1 voids ur warrabty nd u cannot use knox app anymorre thats it no effect to custom rom flashing ......and by the way u said u hav 4.2.2 installed mate 4.2.2 cannot have knox In any way
Sent from my GT-I9500 using Tapatalk

aayushkhajuria2842 said:
Knox o×1 voids ur warrabty nd u cannot use knox app anymorre thats it no effect to custom rom flashing ......and by the way u said u hav 4.2.2 installed mate 4.2.2 cannot have knox In any way
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. Unfortunately it has KNOX. I just got the phone last week. As I already done rooting it.. checking it on SuperSU it said do I wish to disable KNOX? then I pressed yes... some way or the other the carrier may have had knox preinstalled or something... or maybe I am totally lost what KNOX is... what I am afraid of, maybe if it has KNOX, I do hope it doesnt affect performance and phone capabilities in any way.
One thing, if I proceed to install new ROM, will I just download zip file, den go to recovery then install it? is it just that simple like the old days?

No it doesnt many customs rom are available saying they r knox free ....but 4.2.2 cant hav knox on it can u just give a capture of u device in download mode
Sent from my GT-I9500 using Tapatalk

aayushkhajuria2842 said:
No it doesnt many customs rom are available saying they r knox free ....but 4.2.2 cant hav knox on it can u just give a capture of u device in download mode
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
I dont know how to screen capture on download mode but this (https://www.youtube.com/watch?v=UKGfFOKIUkE ) shows that I have voided my warranty because it says "custom". By the way I am on xxubmg5 and I wish to apply this rom from arrow but I dont see any "xxubmg5".
Can I use this ROM ---> http://forum.xda-developers.com/showthread.php?t=2349774
I am on xxubmg5 android 4.2.2 stock carrier locked

MasterYodaMD said:
I dont know how to screen capture on download mode but this (https://www.youtube.com/watch?v=UKGfFOKIUkE ) shows that I have voided my warranty because it says "custom". By the way I am on xxubmg5 and I wish to apply this rom from arrow but I dont see any "xxubmg5".
Can I use this ROM ---> http://forum.xda-developers.com/showthread.php?t=2349774
I am on xxubmg5 android 4.2.2 stock carrier locked
Click to expand...
Click to collapse
Yes u can bt having system status as custom can be solved nd its nt because of knox .....and yes u can use that rom
Sent from my GT-I9500 using Tapatalk

aayushkhajuria2842 said:
Yes u can bt having system status as custom can be solved nd its nt because of knox .....and yes u can use that rom
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Thank you very much. I bet info around here is more reliable than on youtube One more thing, it states within this ;;> ([ROM][JB 4.3][XXUEMK8][30/11] » Arrow ROM v11.0.0 [Fast | Stable | Best Battery Life | Custom Settings | Xposed Module) I am on xxubmg5, and I see a lot of different basebands in the forum specifically here ---> http://forum.xda-developers.com/showthread.php?t=2349774 ... I dont know which one to download as there are many. I am confused.

Just download nd flash v11 that is mk8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-I9500 using Tapatalk
---------- Post added at 11:13 AM ---------- Previous post was at 10:53 AM ----------
Bt just be aware that from 4.3 nd onwards ur phn will have knox as if u want go back to stock u will have to flash 4.3 stock firmware which will be having knox nd if u flash some 4.4.2 custom rom u will nt come back to 4.3 or 4.2 based stock rom or custom rom
Sent from my GT-I9500 using Tapatalk

Ok,
when i set everything together:
4.4.2 is the first version that contains KNOX?
When flashed a 4.4.2 stock you cant go back to previous builds off stock?
So, when i am on XE2 4.2.2, i can actually flash I9505XXUEMKF 4.3 because it doenst contain KNOX?
I reverted back to stock after flash lot of custom but my usb connnector is giving load and data issue..
So i have to go back to sammy for warrenty.
Or is it wish not to flash anything anymore before repair...

aayushkhajuria2842 said:
Just download nd flash v11 that is mk8
Sent from my GT-I9500 using Tapatalk
---------- Post added at 11:13 AM ---------- Previous post was at 10:53 AM ----------
Bt just be aware that from 4.3 nd onwards ur phn will have knox as if u want go back to stock u will have to flash 4.3 stock firmware which will be having knox nd if u flash some 4.4.2 custom rom u will nt come back to 4.3 or 4.2 based stock rom or custom rom
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Thank you. I am kinda getting into it... I hope so. What about those ROMS 4.3 and onwards... most of these custom ROMS are without KNOX they say or they removed it.. true?

MasterYodaMD said:
Thank you. I am kinda getting into it... I hope so. What about those ROMS 4.3 and onwards... most of these custom ROMS are without KNOX they say or they removed it.. true?
Click to expand...
Click to collapse
They removed it nd one thing about 4.3 above roms is that stable downgrade is nt possible
Sent from my GT-I9500 using Tapatalk

aayushkhajuria2842 said:
They removed it nd one thing about 4.3 above roms is that stable downgrade is nt possible
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Yes. I read about downgrade not possible. Would you suggest I stick with 4.2.2? But there are stable versions of 4.3 and above. I dont want ending up with a headache because I went to a custom ROM 4.3 and <. By the way, the link you just sent a while ago.. the arrow rom.. do I only need to download the zip file and install it via recovery with my current 4.2.2 stock? simple as that or do I need to go to a newer ROM and then flash it with that arrow rom?

MasterYodaMD said:
Yes. I read about downgrade not possible. Would you suggest I stick with 4.2.2? But there are stable versions of 4.3 and above. I dont want ending up with a headache because I went to a custom ROM 4.3 and <. By the way, the link you just sent a while ago.. the arrow rom.. do I only need to download the zip file and install it via recovery with my current 4.2.2 stock? simple as that or do I need to go to a newer ROM and then flash it with that arrow rom?
Click to expand...
Click to collapse
Need custom recovery ....I maysuggest u to use cwm recovery nd do a nandroid backup before trying flashing that ron so that if end u doing something wrong u could have an easy option of restore .....by the way my english is nt very good so sry fr that
Sent from my GT-I9500 using Tapatalk
---------- Post added at 08:25 PM ---------- Previous post was at 08:23 PM ----------
aayushkhajuria2842 said:
Need custom recovery ....I maysuggest u to use cwm recovery nd do a nandroid backup before trying flashing that ron so that if end u doing something wrong u could have an easy option of restore .....by the way my english is nt very good so sry fr that
And I think sticking toh 4.2.2 is nt a thing bt flashing 4.4.2 stock rom is risky bt mostly custom roms are based stable versions only
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Sent from my GT-I9500 using Tapatalk

aayushkhajuria2842 said:
Need custom recovery ....I maysuggest u to use cwm recovery nd do a nandroid backup before trying flashing that ron so that if end u doing something wrong u could have an easy option of restore .....by the way my english is nt very good so sry fr that
Sent from my GT-I9500 using Tapatalk
---------- Post added at 08:25 PM ---------- Previous post was at 08:23 PM ----------
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
I already have CWM latest non touch version. so far so good. Your english is hella fine.. no problem. Thanks for your immediate reply. So this is a go signal that I will flash it to 4.3 arrow custom rom from my current ROM?

MasterYodaMD said:
I already have CWM latest non touch version. so far so good. Your english is hella fine.. no problem. Thanks for your immediate reply. So this is a go signal that I will flash it to 4.3 arrow custom rom from my current ROM?
Click to expand...
Click to collapse
I cant tell u abt it so surely as
1 rom is nt developed by me
2 never flashed 4.3 on 4.2 bt flashwd 4.4.2 on 4.3 so it should also work
Thats why I am saying u to have a nandroid backup from cwm so that if it goes wrong u would come back easily
Sent from my GT-I9500 using Tapatalk

aayushkhajuria2842 said:
I cant tell u abt it so surely as
1 rom is nt developed by me
2 never flashed 4.3 on 4.2 bt flashwd 4.4.2 on 4.3 so it should also work
Thats why I am saying u to have a nandroid backup from cwm so that if it goes wrong u would come back easily
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Hi. Sorry but have to ask again. I just wanna make sure things will run smoothly and right... considering I downloaded the zip file for the custom rom... do I need to download a bootloader file?
what do I insert in bootloader, PIT, PHONE, PDA, CSC? or Do I just load the zip file of the ROM under CWM and install it?
Thanks

What r u doing u custom roms r to be flashed in recovery that u said u hav cwm installed follow steps in image
Sent from my GT-I9500 using Tapatalk

aayushkhajuria2842 said:
What r u doing u custom roms r to be flashed in recovery that u said u hav cwm installed follow steps in image View attachment 2658408
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
I have CWM. I was trying a while ago to install arrow rom for my i9505.. I got system 7 error, installation aborted. Does the arrow rom intended only for i9500 and not i9505?

That rom Is for i9505 bt this is sure that u cant flash that zip file from odin
Sent from my GT-I9500 using Tapatalk
---------- Post added at 02:11 PM ---------- Previous post was at 02:05 PM ----------
May be u need to flash a 4.3 stock rom first
Sent from my GT-I9500 using Tapatalk

Related

[Q] downgrade from costum 4.3 to stock 4.2

Hello guys,
I recently flashed Wanamlite 3.0 and I wish to flash stock 4.2.2 .
what should I do to get it to work properly again? Doing that because I need to send the device to the lab. I want my phone as I bought it in the first day- unrooted.
thank you all.
royts2007 said:
Hello guys,
I recently flashed Wanamlite 3.0 and I wish to flash stock 4.2.2 .
what should I do to get it to work properly again? Doing that because I need to send the device to the lab. I want my phone as I bought it in the first day- unrooted.
thank you all.
Click to expand...
Click to collapse
Hi,
Look HERE
malybru said:
Hi,
Look HERE
Click to expand...
Click to collapse
I know the steps. Just wanted to know if its ok to flash stock 4.2 on 4.3
It helped
royts2007 said:
I know the steps. Just wanted to know if its ok to flash stock 4.2 on 4.3
It helped
Click to expand...
Click to collapse
Hi,
You should be fine to flash 4.2.2 , if the ROM you are on does not contain the knox bootloader.
malybru said:
Hi,
You should be fine to flash 4.2.2 , if the ROM you are on does not contain the knox bootloader.
Click to expand...
Click to collapse
And if it does?
What about the wanamlite 3.0 ? Does it contain the knox bootloader? I deleted al knox apps from System/apps with root file manager.
My device is i9500.
royts2007 said:
And if it does?
What about the wanamlite 3.0 ? Does it contain the knox bootloader? I deleted al knox apps from System/apps with root file manager.
My device is i9500.
Click to expand...
Click to collapse
As long as your device did not come with bootloader, you can't have it unless you flashed official samsung firmware
Sent from my GT-N5110 using Tapatalk
Williamharv said:
As long as your device did not come with bootloader, you can't have it unless you flashed official samsung firmware
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
So no problem flash it?
nope. no problem. just make sure u didnt flash official samsung with knox
jarold143 said:
nope. no problem. just make sure u didnt flash official samsung with knox
Click to expand...
Click to collapse
Before flashing wanamlite3.0 I flashed stock 4.3, russia. Its with knox..
Sent from my Nexus 7 using xda app-developers app
Well? Any comments? Simple question: is it ok to flash stock 4.2 on Wanamlite 3.0(4.3)? Before flashing Wanam i flashed stock 4.3(russia)
Yes. Wipe first though.
royts2007 said:
And if it does?
What about the wanamlite 3.0 ? Does it contain the knox bootloader? I deleted al knox apps from System/apps with root file manager.
My device is i9500.
Click to expand...
Click to collapse
Try to go to download mode.. power+volume down+homebutton.. if you see words with knox 0x0 or 0x1 in the upper right corner of the screen then you got knox.. if none then your still in the old bootloader..
hope it helps..
---------- Post added at 07:47 PM ---------- Previous post was at 07:42 PM ----------
jserrano0628 said:
Try to go to download mode.. power+volume down+homebutton.. if you see words with knox 0x0 or 0x1 in the upper right corner of the screen then you got knox.. if none then your still in the old bootloader..
hope it helps..
Click to expand...
Click to collapse
If you do not have knox try to revert back to stock.. by downloading stock firmware at SAMobile.com for your handset and country without knox.. and flash via odin..but make sure to reset flash counter first to make it official.. then after send it to the lab..
jserrano0628 said:
Try to go to download mode.. power+volume down+homebutton.. if you see words with knox 0x0 or 0x1 in the upper right corner of the screen then you got knox.. if none then your still in the old bootloader..
hope it helps..
---------- Post added at 07:47 PM ---------- Previous post was at 07:42 PM ----------
If you do not have knox try to revert back to stock.. by downloading stock firmware at SAMobile.com for your handset and country without knox.. and flash via odin..but make sure to reset flash counter first to make it official.. then after send it to the lab..
Click to expand...
Click to collapse
You were very helpful. Thank you.

[Q] need your help to root N9005 and upgrade it

I just got my note N9005 today , details as attached
I need 2 important things
root for my root apps
custom recovery CWM to have Nand backup and restore options
According to readings there r 2 ways to root
1 - Universal Root de la Vega which offer [KNOX 0x0] and non official rom so u lose OTA, and when u flash CWM u lose also [KNOX 0x0]
2 - CF-Auto-Root which with u lose [KNOX 0x0] and non official rom so u lose OTA
and I think when u flash a stock rom u go back to 100% official state (right?)
Am I right so far?
Ok, now when I started my phone with Kies, I found that there is firmware upgrade is available to my phone as the attached pic, should i root first then upgrade or upgrade then root (i used to use mobile odin pro to inject the root during flashing a new stock rom to keep the root)
If i upgrade via Kies would I lose my apps, settings, data and root (upgrade will wipe), I know that OTA will keep every thing but not sure about root?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thermax04 said:
I just got my note N9005 today , details as attached
I need 2 important things
root for my root apps
custom recovery CWM to have Nand backup and restore options
According to readings there r 2 ways to root
1 - Universal Root de la Vega which offer [KNOX 0x0] and non official rom so u lose OTA, and when u flash CWM u lose also [KNOX 0x0]
2 - CF-Auto-Root which with u lose [KNOX 0x0] and non official rom so u lose OTA
and I think when u flash a stock rom u go back to 100% official state (right?)
Am I right so far?
Ok, now when I started my phone with Kies, I found that there is firmware upgrade is available to my phone as the attached pic, should i root first then upgrade or upgrade then root (i used to use mobile odin pro to inject the root during flashing a new stock rom to keep the root)
If i upgrade via Kies would I lose my apps, settings, data and root (upgrade will wipe), I know that OTA will keep every thing but not sure about root?
Click to expand...
Click to collapse
you will only lose root ,but after you download the update it problem wont install because of root
jaythenut said:
you will only lose root
Click to expand...
Click to collapse
do u mean that if i upgrade via kies I will lose root?
jaythenut said:
but after you download the update it problem wont install because of root
Click to expand...
Click to collapse
do not understand what u mean!!
thermax04 said:
do u mean that if i upgrade via kies I will lose root?
do not understand what u mean!!
Click to expand...
Click to collapse
Yes if you update with kies you will lose root
jaythenut said:
Yes if you update with kies you will lose root
Click to expand...
Click to collapse
ok, should i upgrade first then root?
thermax04 said:
ok, should i upgrade first then root?
Click to expand...
Click to collapse
Just check there's a root for the new firmware then you are good to go
thermax04 said:
I just got my note N9005 today , details as attached
I need 2 important things
root for my root apps
custom recovery CWM to have Nand backup and restore options
According to readings there r 2 ways to root
1 - Universal Root de la Vega which offer [KNOX 0x0] and non official rom so u lose OTA, and when u flash CWM u lose also [KNOX 0x0]
2 - CF-Auto-Root which with u lose [KNOX 0x0] and non official rom so u lose OTA
and I think when u flash a stock rom u go back to 100% official state (right?)
Am I right so far?
Ok, now when I started my phone with Kies, I found that there is firmware upgrade is available to my phone as the attached pic, should i root first then upgrade or upgrade then root (i used to use mobile odin pro to inject the root during flashing a new stock rom to keep the root)
If i upgrade via Kies would I lose my apps, settings, data and root (upgrade will wipe), I know that OTA will keep every thing but not sure about root?
Click to expand...
Click to collapse
Do 1. URDLV first on your current (MJ1) firmware version to get root without tripping knox. If you update to MJ7 first you will get a locked bootloader & will trip knox.
Then update to MJ7 using mobile odin pro 3.85 with a downloaded firmware from sammobile.com
Doing nandroid means installing a custom recovery which would currently trigger knox - no way around this atm. I also want to flash custom recovery and roms, but I'm waiting a couple of months in case a knox-safe method is found.
Sent from my SM-N9005 using Tapatalk
dsm52 said:
Do 1. URDLV first on your current (MJ1) firmware version to get root without tripping knox. If you update to MJ7 first you will get a locked bootloader & will trip knox.
Then update to MJ7 using mobile odin pro 3.85 with a downloaded firmware from sammobile.com
Doing nandroid means installing a custom recovery which would currently trigger knox - no way around this atm. I also want to flash custom recovery and roms, but I'm waiting a couple of months in case a knox-safe method is found.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Can u explain what u mean by : If you update to MJ7 first you will get a locked bootloader
Can u confirm with yes or no: when u flash a stock rom u go back to 100% official state and [KNOX 0x0], after flashing a custom recovery
Custom roms can be installed knox safe
kn0x0ut script
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
thermax04 said:
Can u explain what u mean by : If you update to MJ7 first you will get a locked bootloader
Can u confirm with yes or no: when u flash a stock rom u go back to 100% official state and [KNOX 0x0], after flashing a custom recovery
Click to expand...
Click to collapse
Once Knox is tripped there is NO WAY to reset atm.... You can flash anything you want because it isn't changing to 0x0 again, currently...
Installing root through URDLV WON'Trip knox warranty if you are on MJ1 firmware. As soon as you upgrade your firmware to MJ7 you get a root unfriendly bootloader. Doesn't matter what you use it will trigger Knox 0x1 permanently.
If you root at MJ1 then use Mobile ODIN Pro to upgrade to MJ7 you should be able to go back to MJ1 easily and not have Knox triggered as MOP doesn't flash bootloaders.
ultramag69 said:
Once Knox is tripped there is NO WAY to reset atm.... You can flash anything you want because it isn't changing to 0x0 again, currently...
Installing root through URDLV WON'Trip knox warranty if you are on MJ1 firmware. As soon as you upgrade your firmware to MJ7 you get a root unfriendly bootloader. Doesn't matter what you use it will trigger Knox 0x1 permanently.
If you root at MJ1 then use Mobile ODIN Pro to upgrade to MJ7 you should be able to go back to MJ1 easily and not have Knox triggered as MOP doesn't flash bootloaders.
Click to expand...
Click to collapse
Thank u all
Ok, I got it now
Found 2 threads regarding URDLV method, one of them is closed and rooting files are removed, although most of explanation s were about it, second one is a little confusing to me, can u support me here how 2 do it
thermax04 said:
Thank u all
Ok, I got it now
Found 2 threads regarding URBAN method, one of them is closed and rooting files are removed, although most of explanation s were about it, second one is a little confusing to me, can u support me here how 2 do it
Click to expand...
Click to collapse
Sure i can:
http://forum.xda-developers.com/showpost.php?p=47390175
Will this work? - Sure look at all those who thanked me for this + i supported many german guys with PM + i did it myself and look at my signature
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Killberty said:
Sure i can:
http://forum.xda-developers.com/showpost.php?p=47390175
Will this work? - Sure look at all those who thanked me for this + i supported many german guys with PM + i did it myself and look at my signature
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app
Click to expand...
Click to collapse
iam familiar with rooting and flashing, but never seen something like this before, looks very complicated 2 me, needs alot of concentration, will go through it after finish work, or find an easier solution
thermax04 said:
iam familiar with rooting and flashing, but never seen something like this before, looks very complicated 2 me, needs alot of concentration, will go through it after finish work, or find an easier solution
Click to expand...
Click to collapse
Cmon bro
This is very easy, just follow the steps as decribed - many ppl who never had an android before made it and thanked me and said it was easy
hit 'thanks' if i helped you
SM-N9005 DBT-DMJ7 0x0
XDA Developers 4 premium app

[Q] Installing stock rom after Knox is 0x1

Hello all
Last week I flashed my GT-I9505 a CyanogenMod 10.2 and thus voided my warranty (Knox is 0x1).
Now I regret doing it and I wanna badly go back to stock rom and receive Kies and OTA updates from Samsung and so on.
Is there a way to come back to stock rom 4.3 after I tripped the Knox flag and receive updates?
I heard that when you try to flash stock rom after Knox is 0x1 you gonna brick your device.
Please help.
Thanks in advance
Nothing to worry dear you can go back to stock and you will get OTA also and if done properly unroot you will not brick device
Sent from my GT-I9500 using xda app-developers app
sunnybehl said:
Nothing to worry dear you can go back to stock and you will get OTA also and if done properly unroot you will not brick device
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the quick reply.
I do worry a lot because this device cost me a lot.
What are the steps to unroot safely and goto 4.3 with OTA and KIES updates?
Just as I would do if I were on stock? Put the file in PDA and all the normal steps?
Or do I need to do something extra now?
As you have downloaded cf autoroot now you have to download stock file of your area or location.go to setting see the built version download it from Sammobile site your area built then flash via odin putting that in pda and start odin
Sent from my GT-I9500 using xda app-developers app
sunnybehl said:
As you have downloaded cf autoroot now you have to download stock file of your area or location.go to setting see the built version download it from Sammobile site your area built then flash via odin putting that in pda and start odin
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
I didn't use CF-Autoroot. I installed CyanogenMod on my device using their Installer.
Ok first go to settings then more from there go to about phone, click 10 times on kernel tab you will get developer mode activate then press back key, go to developer mode activate it then debugging mode enable it.then download your area firmware, odin after download put your phone in download mode flash via odin
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 08:31 PM ---------- Previous post was at 08:31 PM ----------
Google it how to unroot s4 device
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 08:33 PM ---------- Previous post was at 08:31 PM ----------
Press tks button if I helped you
Sent from my GT-I9500 using xda app-developers app
sunnybehl said:
Ok first go to settings then more from there go to about phone, click 10 times on kernel tab you will get developer mode activate then press back key, go to developer mode activate it then debugging mode enable it.then download your area firmware, odin after download put your phone in download mode flash via odin
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 08:31 PM ---------- Previous post was at 08:31 PM ----------
Google it how to unroot s4 device
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 08:33 PM ---------- Previous post was at 08:31 PM ----------
Press tks button if I helped you
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
OK thanks. Now that when I'll go back to stock and get OTA and KIES updates what will the Knox serve for?
I thought having the Knox meaning I can't get back to stock and not receive updates.
Meyhemg said:
OK thanks. Now that when I'll go back to stock and get OTA and KIES updates what will the Knox serve for?
I thought having the Knox meaning I can't get back to stock and not receive updates.
Click to expand...
Click to collapse
knox is so they can see when you send your device in that the warrenty is void.
other than that knox does not bother you (apart from downgrading baseband)
djgalning said:
knox is so they can see when you send your device in that the warrenty is void.
other than that knox does not bother you (apart from downgrading baseband)
Click to expand...
Click to collapse
Thanks. So if I do not intend on downgrading baseband and don't have problems with losing my warranty then all is OK?
Meyhemg said:
Thanks. So if I do not intend on downgrading baseband and don't have problems with losing my warranty then all is OK?
Click to expand...
Click to collapse
yep
My device is 0x1 and i am freely installing roms as i please, including going back to stock
djgalning said:
yep
My device is 0x1 and i am freely installing roms as i please, including going back to stock
Click to expand...
Click to collapse
Good, thanks.
Now I wanted to ask you one more question.
As you know, there are roms which do not include Knox in their bootloader. Examples of these are Phoenix and Arrow roms.
What I wanted to ask is if I decide to install one of these roms which does not include Knox, will it delete the Knox out of my bootloader? And on the next time I will install stock rom 4.3 it will show Knox 0x0 as if it were never there?
Thanks
One vital step has been missed if you want to receive OTA: You must reset flash counter using Triangle Away app.
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
One vital step has been missed if you want to receive OTA: You must reset flash counter using Triangle Away app.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
OK. Can you please answer my latest question?
Will installing one of the roms which does not include Knox will remove the Knox out of my bootloader and on the next time I would install stock rom it will be 0x0?
Meyhemg said:
OK. Can you please answer my latest question?
Will installing one of the roms which does not include Knox will remove the Knox out of my bootloader and on the next time I would install stock rom it will be 0x0?
Click to expand...
Click to collapse
There are a few unconfirmed reports of people resetting knox, but until its proven i doubt it...
From what is said its impossible to remove, maybe at some point someone will get it cracked, but knox is still new.
Help
djgalning said:
yep
My device is 0x1 and i am freely installing roms as i please, including going back to stock
Click to expand...
Click to collapse
Hey i got the same issue like the guy that posted this thread, i want to go back to stock rom ... which stock should i download from sammobile? 4.2.2 or 4.3 ... cause i have the 4.2.2 file downloaded, tried to install and in odin it said failed XD, had to reinstall cyanogenmod 11 :S.
Deleted
Forgot there is stock 4.2.2 with Knox.
Sent from my GT-I9505 using xda app-developers app
Meyhemg said:
OK. Can you please answer my latest question?
Will installing one of the roms which does not include Knox will remove the Knox out of my bootloader and on the next time I would install stock rom it will be 0x0?
Click to expand...
Click to collapse
Knox is there to stay for now and this will not work. If something so simple did work i am sure everyone would be doing it to remove knox
help same issue :c
XDAfollower89 said:
Hey i got the same issue like the guy that posted this thread, i want to go back to stock rom ... which stock should i download from sammobile? 4.2.2 or 4.3 ... cause i have the 4.2.2 file downloaded, tried to install and in odin it said failed XD, had to reinstall cyanogenmod 11 :S.
Click to expand...
Click to collapse
heyy man i have same problem , i have knox 0x1 and when i try installing stock firmware it wont let me it fails .. please help i really need to get back to the stock firmware :///
i was on 4.3 rooted today, device status : CUSTOM... wasn't able to ota or anything, instaled triangle away, reseted counter ( after that device still says custom ) , in superSU go to full unroot option, wait until it finishes, reboot... flash stock 4.4.2 through odin, device status official
Hi, i flash back to STOCK. It's working but I need to verify my Samsung account but i totally forgot which email i used. Now i cannot go back to stock except flash again to CUSTOM.
Anyone please help.

[Q] Restore Original and OTA on old bootloader

I have Galaxy S4 international i9505 and I am on old bootloader without knox. I installed OMEGA 19 and I decided to go back at Stock 4.2.2 so I downloaded firmware from sammobile for my country code (XEF) and flashed it with Odin. I had problem with wifi so I also flashed wifi fix for I9505XXUBMEA wich is the ROM I believe it was the stock one as I made no backup before flashing custom
I rooted flashing CF Autoroot and installed Triangle Away and Wanam.
Also changed CSC to XEF with CSC Changer from Play Store
The problem is that I cannot get OTA as no matter how many times I try with Wanam Xposed, system status always goes to Custom.
Also despite having flashed old stock memory and bootloader there seems to be a knox store and a knox app in my applications list.
I want to get back to official and be able follow Samsung updates as I am going to sell the phone and the buyer wants official 4.3 and Knox 0x0
Can someone tell me what am I doing wrong because I followed every guide in XDA??
Forgot to mention that Triangle Away shows Binary and System Official but Device information does not!
Also Kies tells me that there is an update. Should I install it from there or will it trigger knox??
Do hav any custom recovery installed
No custom recovery. I have the recovery that was flashed with Odin though I am currently searching how to ectract recovery from firmware and flash it again
Reflashing any stock rom would make u recieve ota updates bt I cant say about knox
Hit thanx if I helped
I allready flashed stock 4.2.2 but I cannot get device status to official. Thanks anyway
Bt I think the files ur flashing after flashing stock firmware are creating the prblm of ota ....jst flash again some firmware nd dont even root and see whether u r getting ota updates r not
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
In xda thanks is nt said it is pressed I think
aayushkhajuria2842 said:
Bt I think the files ur flashing after flashong stock firmware are creating the prblm of ota ....jst flash again some firmware nd dont even root and see whether u r getting ota updates r not
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
In xda thanks is nt said it is pressed I think
Click to expand...
Click to collapse
The way I do it should be working according the the guides here on xda cause I wanted to reset binary counter. I am going to try to flash stock again and report back!
loumbas said:
The way I do it should be working according the the guides here on xda cause I wanted to reset binary counter. I am going to try to flash stock again and report back!
Click to expand...
Click to collapse
Okk
I decided not to sell. I will keep my phone with Omega and I will see later what to do to go back to stock!
MODs lock the thread!

[q] [how to] stop get ting modified while trying ota updates

this phone was rooted but now i flash a stock rom again to unroot..... plz help.... how to get ota updates from now?
Sent from my GT-I9500
aayushkhajuria2842 said:
this phone was rooted but now i flash a stock rom again to unroot..... plz help.... how to get ota updates from now?
Sent from my GT-I9500
Click to expand...
Click to collapse
Why do you want ota when you can flash via odin?
Use wanam xposed while being on root and change the thing to official (xposed->security) Might work.
Plus see if your custom counts are nil. (That's not possible as of now i think.)
"If someone helps, never forget to hit thanks ? "
dont want to download 1.5 gb every time where ota will take less time....... triangle away is not supported so is there any other way
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Why do you want ota when you can flash via odin?
Use wanam xposed while being on root and change the thing to official (xposed->security) Might work.
Plus see if your custom counts are nil.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
im not rooted at this time
Sent from my GT-I9500
aayushkhajuria2842 said:
im not rooted at this time
Sent from my GT-I9500
Click to expand...
Click to collapse
There are not much changes with everytime.
Im on NH4 till date and did not bother to flash things.
If you want to try a rom relating to a particular firmware..you can just flash/update the bootloader of your phone
And most of the roms function on the same firmware. A few of the devs use different bootloaders.
And yes. If youre on an updated bootloader, you cannot downgrade
Rest use wanam xposed to change your value from custom to official. That is the only way I can think of. You need root.
Flash philz. Flash deknox script. Reroot via philz. Use wanam xposed.
Because maybe under settings-->about phone the official thing is set to custom.
"If someone helps, never forget to hit thanks ? "
---------- Post added at 09:13 AM ---------- Previous post was at 09:05 AM ----------
Ohh and i forgot to mention.
If an OTA stops in between a flash (very common and frequent). You still need an odin flashable file
And generally samsung sends OTA updates when most of the world is done with the upgrade via Odin. Nobody gets it on day one of release (a few of them are lucky lets not talk about them)
And we know what samsung does to its Indian customers.
(Ive just received OTA twice. One on Note2 when I had it and the other on S4 relating to knox 1.0 to 2.0)
They fool the sh|t out of you at times.
"If someone helps, never forget to hit thanks ? "

Categories

Resources