I have Galaxy S4 international i9505 and I am on old bootloader without knox. I installed OMEGA 19 and I decided to go back at Stock 4.2.2 so I downloaded firmware from sammobile for my country code (XEF) and flashed it with Odin. I had problem with wifi so I also flashed wifi fix for I9505XXUBMEA wich is the ROM I believe it was the stock one as I made no backup before flashing custom
I rooted flashing CF Autoroot and installed Triangle Away and Wanam.
Also changed CSC to XEF with CSC Changer from Play Store
The problem is that I cannot get OTA as no matter how many times I try with Wanam Xposed, system status always goes to Custom.
Also despite having flashed old stock memory and bootloader there seems to be a knox store and a knox app in my applications list.
I want to get back to official and be able follow Samsung updates as I am going to sell the phone and the buyer wants official 4.3 and Knox 0x0
Can someone tell me what am I doing wrong because I followed every guide in XDA??
Forgot to mention that Triangle Away shows Binary and System Official but Device information does not!
Also Kies tells me that there is an update. Should I install it from there or will it trigger knox??
Do hav any custom recovery installed
No custom recovery. I have the recovery that was flashed with Odin though I am currently searching how to ectract recovery from firmware and flash it again
Reflashing any stock rom would make u recieve ota updates bt I cant say about knox
Hit thanx if I helped
I allready flashed stock 4.2.2 but I cannot get device status to official. Thanks anyway
Bt I think the files ur flashing after flashing stock firmware are creating the prblm of ota ....jst flash again some firmware nd dont even root and see whether u r getting ota updates r not
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
In xda thanks is nt said it is pressed I think
aayushkhajuria2842 said:
Bt I think the files ur flashing after flashong stock firmware are creating the prblm of ota ....jst flash again some firmware nd dont even root and see whether u r getting ota updates r not
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
In xda thanks is nt said it is pressed I think
Click to expand...
Click to collapse
The way I do it should be working according the the guides here on xda cause I wanted to reset binary counter. I am going to try to flash stock again and report back!
loumbas said:
The way I do it should be working according the the guides here on xda cause I wanted to reset binary counter. I am going to try to flash stock again and report back!
Click to expand...
Click to collapse
Okk
I decided not to sell. I will keep my phone with Omega and I will see later what to do to go back to stock!
MODs lock the thread!
Related
Hello guys,
I recently flashed Wanamlite 3.0 and I wish to flash stock 4.2.2 .
what should I do to get it to work properly again? Doing that because I need to send the device to the lab. I want my phone as I bought it in the first day- unrooted.
thank you all.
royts2007 said:
Hello guys,
I recently flashed Wanamlite 3.0 and I wish to flash stock 4.2.2 .
what should I do to get it to work properly again? Doing that because I need to send the device to the lab. I want my phone as I bought it in the first day- unrooted.
thank you all.
Click to expand...
Click to collapse
Hi,
Look HERE
malybru said:
Hi,
Look HERE
Click to expand...
Click to collapse
I know the steps. Just wanted to know if its ok to flash stock 4.2 on 4.3
It helped
royts2007 said:
I know the steps. Just wanted to know if its ok to flash stock 4.2 on 4.3
It helped
Click to expand...
Click to collapse
Hi,
You should be fine to flash 4.2.2 , if the ROM you are on does not contain the knox bootloader.
malybru said:
Hi,
You should be fine to flash 4.2.2 , if the ROM you are on does not contain the knox bootloader.
Click to expand...
Click to collapse
And if it does?
What about the wanamlite 3.0 ? Does it contain the knox bootloader? I deleted al knox apps from System/apps with root file manager.
My device is i9500.
royts2007 said:
And if it does?
What about the wanamlite 3.0 ? Does it contain the knox bootloader? I deleted al knox apps from System/apps with root file manager.
My device is i9500.
Click to expand...
Click to collapse
As long as your device did not come with bootloader, you can't have it unless you flashed official samsung firmware
Sent from my GT-N5110 using Tapatalk
Williamharv said:
As long as your device did not come with bootloader, you can't have it unless you flashed official samsung firmware
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
So no problem flash it?
nope. no problem. just make sure u didnt flash official samsung with knox
jarold143 said:
nope. no problem. just make sure u didnt flash official samsung with knox
Click to expand...
Click to collapse
Before flashing wanamlite3.0 I flashed stock 4.3, russia. Its with knox..
Sent from my Nexus 7 using xda app-developers app
Well? Any comments? Simple question: is it ok to flash stock 4.2 on Wanamlite 3.0(4.3)? Before flashing Wanam i flashed stock 4.3(russia)
Yes. Wipe first though.
royts2007 said:
And if it does?
What about the wanamlite 3.0 ? Does it contain the knox bootloader? I deleted al knox apps from System/apps with root file manager.
My device is i9500.
Click to expand...
Click to collapse
Try to go to download mode.. power+volume down+homebutton.. if you see words with knox 0x0 or 0x1 in the upper right corner of the screen then you got knox.. if none then your still in the old bootloader..
hope it helps..
---------- Post added at 07:47 PM ---------- Previous post was at 07:42 PM ----------
jserrano0628 said:
Try to go to download mode.. power+volume down+homebutton.. if you see words with knox 0x0 or 0x1 in the upper right corner of the screen then you got knox.. if none then your still in the old bootloader..
hope it helps..
Click to expand...
Click to collapse
If you do not have knox try to revert back to stock.. by downloading stock firmware at SAMobile.com for your handset and country without knox.. and flash via odin..but make sure to reset flash counter first to make it official.. then after send it to the lab..
jserrano0628 said:
Try to go to download mode.. power+volume down+homebutton.. if you see words with knox 0x0 or 0x1 in the upper right corner of the screen then you got knox.. if none then your still in the old bootloader..
hope it helps..
---------- Post added at 07:47 PM ---------- Previous post was at 07:42 PM ----------
If you do not have knox try to revert back to stock.. by downloading stock firmware at SAMobile.com for your handset and country without knox.. and flash via odin..but make sure to reset flash counter first to make it official.. then after send it to the lab..
Click to expand...
Click to collapse
You were very helpful. Thank you.
I finally downgrade my S4 I9500 from stock 4.4.2 to stock 4.2.2 just follow this:
1. download galaxy s4 i9500 south africa rom 4.2.2 from Sammolbile (I9500XXUBMH1) to be specific).
2. use odin 3.09 to flash it.
3. enter in reconery mode and make a factory reset and Done.
*the only thing is that it stays custom but that doesnt matter you can flash another official rom later.
Lier :silly:. People that post this **** for force THANKS button and dont help anything.
it is true
I tried this instruccions as they are and it worked for me just did it last night.....i red it on a comemnt of a post here in xda
justito02 said:
I tried this instruccions as they are and it worked for me just did it last night.....i red it on a comemnt of a post here in xda
Click to expand...
Click to collapse
And you dont have problems with wifi, battery drain, no sound, random reboots, etc? Lucky guy then :highfive:
it was possible from 4.3... it seems that it worked also from 4.4.2
http://forum.xda-developers.com/showpost.php?p=46748689&postcount=6138
I confirm this. I just downgraded from 4.4.2 to 4.2.2
I was using Omega 19 till yesterday. Today i went mad and was switching b/w different ROMS. here is the story:
Installed AICP ROM 4.4.2, i didn't liked the ROM very much so i went back to old MIUI rom (miuiandroid_multi_ja3g_4.1.3_jb-4.2). Then just for a check, i copied I9500_Omega_v14.1_UBUBMH1 and flashed. Yep It did work. Here is the screenshot.
hi guys,where can i download the I9500XXUBMH1 firmware ,I cant find any work link.
and is this firmware locked?
thanx for reply
hiwow said:
hi guys,where can i download the I9500XXUBMH1 firmware ,I cant find any work link.
and is this firmware locked?
thanx for reply
Click to expand...
Click to collapse
PDA: I9500XXUBMH1
CSC: I9500OJVBMH2
MODEM: I9500XXUBMG9
t e r a f i l e . c o /53d532c26d68/I9500XXUBMH1_I9500OJVBMH2_XFE.zip[/url]
Ajith Roy said:
I confirm this. I just downgraded from 4.4.2 to 4.2.2
I was using Omega 19 till yesterday. Today i went mad and was switching b/w different ROMS. here is the story:
Installed AICP ROM 4.4.2, i didn't liked the ROM very much so i went back to old MIUI rom (miuiandroid_multi_ja3g_4.1.3_jb-4.2). Then just for a check, i copied I9500_Omega_v14.1_UBUBMH1 and flashed. Yep It did work. Here is the screenshot.
Click to expand...
Click to collapse
but all know bootloader will not allow you to downgrade!
Yes I heard some people downgraded from 4.4.2 to 4.2.2
But my question is knox will be gone or not? And if its gone the Warranty void 0×1 will be reset to 0×0 or not?
---------- Post added at 07:48 PM ---------- Previous post was at 07:34 PM ----------
Can you take picture of the downloading mode screen
RubbaBand said:
Yes I heard some people downgraded from 4.4.2 to 4.2.2
But my question is knox will be gone or not? And if its gone the Warranty void 0×1 will be reset to 0×0 or not?
---------- Post added at 07:48 PM ---------- Previous post was at 07:34 PM ----------
Can you take picture of the downloading mode screen
Click to expand...
Click to collapse
MH1 with the 4.2.2 ROM to back. 4.3 What do I get with rom?
RubbaBand said:
Yes I heard some people downgraded from 4.4.2 to 4.2.2
But my question is knox will be gone or not? And if its gone the Warranty void 0×1 will be reset to 0×0 or not?
---------- Post added at 07:48 PM ---------- Previous post was at 07:34 PM ----------
Can you take picture of the downloading mode screen
Click to expand...
Click to collapse
Does anyone do that? Have a tutorial demonstrating the downgrade? Sorry my bad English.
yes simple way and success in my device...
justito02 said:
I finally downgrade my S4 I9500 from stock 4.4.2 to stock 4.2.2 just follow this:
1. download galaxy s4 i9500 south africa rom 4.2.2 from Sammolbile (I9500XXUBMH1) to be specific).
2. use odin 3.09 to flash it.
3. enter in reconery mode and make a factory reset and Done.
*the only thing is that it stays custom but that doesnt matter you can flash another official rom later.
Click to expand...
Click to collapse
From which 4.4.2 stock firmware exactly did you downgrade? What about Knox Kernel Lock and Warranty Void when you boot into download mode? I reckon they are still there and both are set to 0x1, right? Could you post a screenshot please? Thanks.
http://forum.xda-developers.com/showthread.php?t=2744908
find the modem file of your phone's current firmware. then downgrade the firmware. and then flash the modem file...
(there is a problem the phone can't be charged when it is off)
RubbaBand said:
Yes I heard some people downgraded from 4.4.2 to 4.2.2
But my question is knox will be gone or not? And if its gone the Warranty void 0×1 will be reset to 0×0 or not?
---------- Post added at 07:48 PM ---------- Previous post was at 07:34 PM ----------
Can you take picture of the downloading mode screen
Click to expand...
Click to collapse
it does not reset knox counter. if your knox counter was already triggered, it remains the same. i downgraded my GT-I9500 yesterday.
And I9505 is possible to downgrade?
Please new download link
downgrade for sgh-i337m possible
justito02 said:
I finally downgrade my S4 I9500 from stock 4.4.2 to stock 4.2.2 just follow this:
1. download galaxy s4 i9500 south africa rom 4.2.2 from Sammolbile (I9500XXUBMH1) to be specific).
2. use odin 3.09 to flash it.
3. enter in reconery mode and make a factory reset and Done.
*the only thing is that it stays custom but that doesnt matter you can flash another official rom later.
Click to expand...
Click to collapse
I rooted my phone then....added (flashed) the 4.2.2 modem to it. Then flashed the 4.2.2 firmware. You will have to extract the modem from the firmware. Just add the extension .rar to the firmware name ( rename it) eg. 'Tar.md5.rar' and extract modem.bin. use odin to flash it to your phone. Use PDA OPTION TO FLASH MODEM FILE. Then flash your 4.2.2 firmware. Factory reset and wipe cash before phone starts up. However.....no sound...no wifi. ..have to find a work around this. Will let you all know when I figure it out.....Contact me at [email protected].
Flash the modem again and you should have your issue resolved. Sometimes the flash doesn't fully take, and it might have something to do with the S4 storing a backup of the modem.
Hi i have this phone and i want to install original firmware(for i9505x) because i have problem with my battery. recently i have installed 4.4.2 for i9505,maybe cant be compatible. someone have problem with his battery and have i9505x model ?my phone have sim
You can go back to 4.3 but you need to have root access and removed KNOX then flash the 4.3 Firmware.
Or try to Wipe/data factory reset & cache partion
Sent from my GT-I9500 using CYANOGENMOD 11
RubbaBand said:
You can go back to 4.3 but you need to have root access and removed KNOX then flash the 4.3 Firmware.
Or try to Wipe/data factory reset & cache partion
Sent from my GT-I9500 using CYANOGENMOD 11
Click to expand...
Click to collapse
i have rooted my phone.i dont know remove my knox you have the tutorial ?
Download & Flash Deknox Removal Script
VIA Recovery
Then Download The South African 4.3 Firmware From Sammobile
Then Flash The Firmware VIA Odin
---------- Post added at 09:53 PM ---------- Previous post was at 09:48 PM ----------
But i Would recommend you try to wipe date & cache maybe the problem will gone
RubbaBand said:
Download & Flash Deknox Removal Script
VIA Recovery
Then Download The South African 4.3 Firmware From Sammobile
Then Flash The Firmware VIA Odin
---------- Post added at 09:53 PM ---------- Previous post was at 09:48 PM ----------
But i Would recommend you try to wipe date & cache maybe the problem will gone
Click to expand...
Click to collapse
i maked 100 times and the problem persist
OK. Try To Remove KNOX Then Flash
(But Some Times KNOX Maybe The Reason)
try to test the device after removing KNOX
RubbaBand said:
You can go back to 4.3 but you need to have root access and removed KNOX then flash the 4.3 Firmware.
Or try to Wipe/data factory reset & cache partion
Sent from my GT-I9500 using CYANOGENMOD 11
Click to expand...
Click to collapse
dolarica said:
i have rooted my phone.i dont know remove my knox you have the tutorial ?
Click to expand...
Click to collapse
RubbaBand said:
Download & Flash Deknox Removal Script
VIA Recovery
Then Download The South African 4.3 Firmware From Sammobile
Then Flash The Firmware VIA Odin
---------- Post added at 09:53 PM ---------- Previous post was at 09:48 PM ----------
But i Would recommend you try to wipe date & cache maybe the problem will gone
Click to expand...
Click to collapse
RubbaBand said:
OK. Try To Remove KNOX Then Flash
(But Some Times KNOX Maybe The Reason)
try to test the device after removing KNOX
Click to expand...
Click to collapse
1. Knox will not be removed, only the related apps.
2. Once the official 4.4 firmware is flashed, its not possible to get back to official 4.3
Because, by flashing official 4.4, the bootloader will be updated. Once its updated, there's no way to downgrade the bootloader.
The only way to get back to 4.3 is to flash a 4.3 customrom via recovery.
Hi there! Its been a while, haven't posted since some troubles with my Epic 4G.
I've been trying to go back to stock ROM from [NAE][4.4.2] Negalite WondeROM X but since its NAE I think it tripped Knox flag. The ROM ended up with some weird errors (something about android.process.acore, which I tried to fix to no avail clearing data, uninstalling apps, etc). I tried to go back to a previous stock ROM. ODIN did not want to flash the ROMs, always failed at write operation. I don't know whats the best process to follow, and whether I should flash modems, firmware, etc...
Some guidance on how to restore to a stable stock ROM so I can then flash a custom ROM based on the stable ROM installed. Thank you!
Bombillazo said:
Hi there! Its been a while, haven't posted since some troubles with my Epic 4G.
I've been trying to go back to stock ROM from [NAE][4.4.2] Negalite WondeROM X but since its NAE I think it tripped Knox flag. The ROM ended up with some weird errors (something about android.process.acore, which I tried to fix to no avail clearing data, uninstalling apps, etc). I tried to go back to a previous stock ROM. ODIN did not want to flash the ROMs, always failed at write operation. I don't know whats the best process to follow, and whether I should flash modems, firmware, etc...
Some guidance on how to restore to a stable stock ROM so I can then flash a custom ROM based on the stable ROM installed. Thank you!
Click to expand...
Click to collapse
Go in here, type in your device model and you will get a list of all available firmwares that would restore your device to factory.
http://www.sammobile.com/firmwares/
---------- Post added at 12:20 PM ---------- Previous post was at 12:18 PM ----------
Just remember don't try and download anything prior to 4.4.2 if you had ever updated to it.
BIGSAMDA1ST said:
Go in here, type in your device model and you will get a list of all available firmwares that would restore your device to factory.
http://www.sammobile.com/firmwares/
---------- Post added at 12:20 PM ---------- Previous post was at 12:18 PM ----------
Just remember don't try and download anything prior to 4.4.2 if you had ever updated to it.
Click to expand...
Click to collapse
Thanks, I'm trying (again) the stock NAE since every time I choose an older one it failed miserably.
Tried it from my laptop this time, it worked! Got stock again.
What would be the procedure to go to a custom NAE ROM now that its KNOXed...?
Yeah ,like I said if you had already updated your device to 4.4.2 there is no going back to anything previous as it will fail.
Awesome. Worked. Rooted and used wanam. Thanks a lot!
Sent from my SPH-L720 using XDA Free mobile app
Bombillazo said:
Tried it from my laptop this time, it worked! Got stock again.
What would be the procedure to go to a custom NAE ROM now that its KNOXed...?
Click to expand...
Click to collapse
You should be able to flash any 4.4.2 custom rom. Just check out the rom threads and read through them.
Here's one that's pretty solid.
http://forum.xda-developers.com/showthread.php?p=48775946
But like I said check out the threads until you find one you like and make sure to read up on it.
this phone was rooted but now i flash a stock rom again to unroot..... plz help.... how to get ota updates from now?
Sent from my GT-I9500
aayushkhajuria2842 said:
this phone was rooted but now i flash a stock rom again to unroot..... plz help.... how to get ota updates from now?
Sent from my GT-I9500
Click to expand...
Click to collapse
Why do you want ota when you can flash via odin?
Use wanam xposed while being on root and change the thing to official (xposed->security) Might work.
Plus see if your custom counts are nil. (That's not possible as of now i think.)
"If someone helps, never forget to hit thanks ? "
dont want to download 1.5 gb every time where ota will take less time....... triangle away is not supported so is there any other way
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Why do you want ota when you can flash via odin?
Use wanam xposed while being on root and change the thing to official (xposed->security) Might work.
Plus see if your custom counts are nil.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
im not rooted at this time
Sent from my GT-I9500
aayushkhajuria2842 said:
im not rooted at this time
Sent from my GT-I9500
Click to expand...
Click to collapse
There are not much changes with everytime.
Im on NH4 till date and did not bother to flash things.
If you want to try a rom relating to a particular firmware..you can just flash/update the bootloader of your phone
And most of the roms function on the same firmware. A few of the devs use different bootloaders.
And yes. If youre on an updated bootloader, you cannot downgrade
Rest use wanam xposed to change your value from custom to official. That is the only way I can think of. You need root.
Flash philz. Flash deknox script. Reroot via philz. Use wanam xposed.
Because maybe under settings-->about phone the official thing is set to custom.
"If someone helps, never forget to hit thanks ? "
---------- Post added at 09:13 AM ---------- Previous post was at 09:05 AM ----------
Ohh and i forgot to mention.
If an OTA stops in between a flash (very common and frequent). You still need an odin flashable file
And generally samsung sends OTA updates when most of the world is done with the upgrade via Odin. Nobody gets it on day one of release (a few of them are lucky lets not talk about them)
And we know what samsung does to its Indian customers.
(Ive just received OTA twice. One on Note2 when I had it and the other on S4 relating to knox 1.0 to 2.0)
They fool the sh|t out of you at times.
"If someone helps, never forget to hit thanks ? "