Hi there! Its been a while, haven't posted since some troubles with my Epic 4G.
I've been trying to go back to stock ROM from [NAE][4.4.2] Negalite WondeROM X but since its NAE I think it tripped Knox flag. The ROM ended up with some weird errors (something about android.process.acore, which I tried to fix to no avail clearing data, uninstalling apps, etc). I tried to go back to a previous stock ROM. ODIN did not want to flash the ROMs, always failed at write operation. I don't know whats the best process to follow, and whether I should flash modems, firmware, etc...
Some guidance on how to restore to a stable stock ROM so I can then flash a custom ROM based on the stable ROM installed. Thank you!
Bombillazo said:
Hi there! Its been a while, haven't posted since some troubles with my Epic 4G.
I've been trying to go back to stock ROM from [NAE][4.4.2] Negalite WondeROM X but since its NAE I think it tripped Knox flag. The ROM ended up with some weird errors (something about android.process.acore, which I tried to fix to no avail clearing data, uninstalling apps, etc). I tried to go back to a previous stock ROM. ODIN did not want to flash the ROMs, always failed at write operation. I don't know whats the best process to follow, and whether I should flash modems, firmware, etc...
Some guidance on how to restore to a stable stock ROM so I can then flash a custom ROM based on the stable ROM installed. Thank you!
Click to expand...
Click to collapse
Go in here, type in your device model and you will get a list of all available firmwares that would restore your device to factory.
http://www.sammobile.com/firmwares/
---------- Post added at 12:20 PM ---------- Previous post was at 12:18 PM ----------
Just remember don't try and download anything prior to 4.4.2 if you had ever updated to it.
BIGSAMDA1ST said:
Go in here, type in your device model and you will get a list of all available firmwares that would restore your device to factory.
http://www.sammobile.com/firmwares/
---------- Post added at 12:20 PM ---------- Previous post was at 12:18 PM ----------
Just remember don't try and download anything prior to 4.4.2 if you had ever updated to it.
Click to expand...
Click to collapse
Thanks, I'm trying (again) the stock NAE since every time I choose an older one it failed miserably.
Tried it from my laptop this time, it worked! Got stock again.
What would be the procedure to go to a custom NAE ROM now that its KNOXed...?
Yeah ,like I said if you had already updated your device to 4.4.2 there is no going back to anything previous as it will fail.
Awesome. Worked. Rooted and used wanam. Thanks a lot!
Sent from my SPH-L720 using XDA Free mobile app
Bombillazo said:
Tried it from my laptop this time, it worked! Got stock again.
What would be the procedure to go to a custom NAE ROM now that its KNOXed...?
Click to expand...
Click to collapse
You should be able to flash any 4.4.2 custom rom. Just check out the rom threads and read through them.
Here's one that's pretty solid.
http://forum.xda-developers.com/showthread.php?p=48775946
But like I said check out the threads until you find one you like and make sure to read up on it.
Related
Hi,
I had my S4 (Rogers) on stock ROM with root. I want to put back the original ROM so I can upgrade to 4.3. I used Kies to put back original ROM but now when I try to upgrade I get a message saying my phone was modified and I cannot upgrade. How do I put the original ROM so I can upgrade my phone? Do I have to flash a ROM with Odin and if so where do I get the original ROM for my phone (Rogers).
Thanks.
Ignore this post. You have an i337m. That method will not work for you.
Sent from my SGH-I337 using Tapatalk
HORiZUN said:
Get the mf3 md5 files, put phone into download mode, use Odin to restore to stock.
You will be able to update after that, but I'm pretty sure I read they pulled the update due to issues people were having.
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
what issues ? I got mine from Bell yesterday and its an update worth the trouble to go back to stock IMO.
Im very happy with 4.3.
Problems appear to be isolated within AT&T users.
http://m.gsmarena.com/android_43_update_for_at_t_galaxy_s4_gets_delayed_as_well-news-7209.php
Sent from my SGH-I337 using Tapatalk
in general, to unroot your phone,
Open SuperSu, go to the Settings tab, scroll down until you will find Full unroot. Click it and proceed with the instructions.
Good luck, let me know if it worked for you
HORiZUN said:
Problems appear to be isolated within AT&T users.
http://m.gsmarena.com/android_43_update_for_at_t_galaxy_s4_gets_delayed_as_well-news-7209.php
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
the OP says he is with Rogers...
---------- Post added at 11:43 PM ---------- Previous post was at 11:41 PM ----------
love is me said:
in general, to unroot your phone,
Open SuperSu, go to the Settings tab, scroll down until you will find Full unroot. Click it and proceed with the instructions.
Good luck, let me know if it worked for you
Click to expand...
Click to collapse
Triangle away + Unroot (SuperSU) wasnt enougn in my case. I had to install an Official Stock ROM and then proceed with OTA update.
slam666 said:
Hi,
I had my S4 (Rogers) on stock ROM with root. I want to put back the original ROM so I can upgrade to 4.3. I used Kies to put back original ROM but now when I try to upgrade I get a message saying my phone was modified and I cannot upgrade. How do I put the original ROM so I can upgrade my phone? Do I have to flash a ROM with Odin and if so where do I get the original ROM for my phone (Rogers).
Thanks.
Click to expand...
Click to collapse
sammobile.com has the new Rogers 4.3 MK6 .tar file in the firmware section.....download and flash 4.3 via Odin.
I did unroot too my device status is still custom. I tried flashing AMG1 on top still says custom...
duykhang524 said:
I did unroot too my device status is still custom. I tried flashing AMG1 on top still says custom...
Click to expand...
Click to collapse
No matter what stock rom I try to use, oden fails with a write protection enabled. Actually I see this write protection on the phone when I start it in download mode. Can someone help me with this.
Thanks
Same here, I flashed the stock rom so no root or any custom anything but I still can't get OTA updates
unroot not success
Relayers said:
the OP says he is with Rogers...
---------- Post added at 11:43 PM ---------- Previous post was at 11:41 PM ----------
Triangle away + Unroot (SuperSU) wasnt enougn in my case. I had to install an Official Stock ROM and then proceed with OTA update.
Click to expand...
Click to collapse
that is not the way to unroot i have already tried this but still device is rooted now its show modified when i try to update.
reddysp said:
that is not the way to unroot i have already tried this but still device is rooted now its show modified when i try to update.
Click to expand...
Click to collapse
You have to make sure busybox gets uninstalled also. Sometimes it is left there and that trips the custom status.
I have Galaxy S4 international i9505 and I am on old bootloader without knox. I installed OMEGA 19 and I decided to go back at Stock 4.2.2 so I downloaded firmware from sammobile for my country code (XEF) and flashed it with Odin. I had problem with wifi so I also flashed wifi fix for I9505XXUBMEA wich is the ROM I believe it was the stock one as I made no backup before flashing custom
I rooted flashing CF Autoroot and installed Triangle Away and Wanam.
Also changed CSC to XEF with CSC Changer from Play Store
The problem is that I cannot get OTA as no matter how many times I try with Wanam Xposed, system status always goes to Custom.
Also despite having flashed old stock memory and bootloader there seems to be a knox store and a knox app in my applications list.
I want to get back to official and be able follow Samsung updates as I am going to sell the phone and the buyer wants official 4.3 and Knox 0x0
Can someone tell me what am I doing wrong because I followed every guide in XDA??
Forgot to mention that Triangle Away shows Binary and System Official but Device information does not!
Also Kies tells me that there is an update. Should I install it from there or will it trigger knox??
Do hav any custom recovery installed
No custom recovery. I have the recovery that was flashed with Odin though I am currently searching how to ectract recovery from firmware and flash it again
Reflashing any stock rom would make u recieve ota updates bt I cant say about knox
Hit thanx if I helped
I allready flashed stock 4.2.2 but I cannot get device status to official. Thanks anyway
Bt I think the files ur flashing after flashing stock firmware are creating the prblm of ota ....jst flash again some firmware nd dont even root and see whether u r getting ota updates r not
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
In xda thanks is nt said it is pressed I think
aayushkhajuria2842 said:
Bt I think the files ur flashing after flashong stock firmware are creating the prblm of ota ....jst flash again some firmware nd dont even root and see whether u r getting ota updates r not
---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------
In xda thanks is nt said it is pressed I think
Click to expand...
Click to collapse
The way I do it should be working according the the guides here on xda cause I wanted to reset binary counter. I am going to try to flash stock again and report back!
loumbas said:
The way I do it should be working according the the guides here on xda cause I wanted to reset binary counter. I am going to try to flash stock again and report back!
Click to expand...
Click to collapse
Okk
I decided not to sell. I will keep my phone with Omega and I will see later what to do to go back to stock!
MODs lock the thread!
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
If you need to ask these questions you should not have rooted. Look in the general forum.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
If you need to ask these questions you should not have rooted. Look in the general forum.
Click to expand...
Click to collapse
I freely admit that I'm new to this, so no reason to point that out. There are other reasons to root besides flashing custom ROMs, and I don't see any reason why I shouldn't have rooted. Every time I look through threads for my build, people just say that it can't be rooted (which is obviously no longer the case, since I'm successfully rooted). I just want to know what kind of capabilities I should look into, and as I understand it, the best way to do that and start tinkering is by using Safestrap.
Safestrap will allow you to flash touch wiz based roms. What firmware are you on?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Safestrap will allow you to flash touch wiz based roms. What firmware are you on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I'm running 4.4.2, Kernel 3.4.0-1125940.
go4bacon said:
I'm running 4.4.2, Kernel 3.4.0-1125940.
Click to expand...
Click to collapse
What's your baseband?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
What's your baseband?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I think it's I337UCUFNC1.
go4bacon said:
I think it's I337UCUFNC1.
Click to expand...
Click to collapse
You're on nc1 firmware. Look for this http://forum.xda-developers.com/showthread.php?p=51067706
Sent from my Nexus 5 using XDA Free mobile app
go4bacon said:
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
Click to expand...
Click to collapse
Safestrap 3.72...
https://www.dropbox.com/s/udgft6eu2d0fv8r/Safestrap-JFLTE-3.72-kk-B01.apk
Make sure you read read read.
After flashing a rom such as Goldeneye inrecovery dont reboot system go back to the home and flash the proper kernel modules and super user.zip. If on golden eye..As far as i know you cannot flash custom kernels
spirodave said:
Safestrap 3.72...
https://www.dropbox.com/s/udgft6eu2d0fv8r/Safestrap-JFLTE-3.72-kk-B01.apk
Click to expand...
Click to collapse
This is so frustrating. I installed the .apk successfully, but tapping "Install Recovery" doesn't seem to work. I get a "Installation Complete" pop-up, but it still shows as uninstalled and I can't boot into SS. I haven't heard of anyone having this problem before.
go4bacon said:
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
Click to expand...
Click to collapse
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
go4bacon said:
This is so frustrating. I installed the .apk successfully, but tapping "Install Recovery" doesn't seem to work. I get a "Installation Complete" pop-up, but it still shows as uninstalled and I can't boot into SS. I haven't heard of anyone having this problem before.
Click to expand...
Click to collapse
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
spirodave said:
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
Click to expand...
Click to collapse
These are links .
http://forum.xda-developers.com/showthread.php?t=2692825 this is for Nb1_Stock_Rooted
http://forum.xda-developers.com/showthread.php?t=2663545 this is to downgrade
If all else fails then downgrade and get to stockrootednb1. You should have no issues using safestrap with NB1
spirodave said:
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
These are links .
http://forum.xda-developers.com/showthread.php?t=2692825 this is for Nb1_Stock_Rooted
http://forum.xda-developers.com/showthread.php?t=2663545 this is to downgrade
If all else fails then downgrade and get to stockrootednb1. You should have no issues using safestrap with NB1
Click to expand...
Click to collapse
Lmfao or you could get SELinux Mode Changer and set to permissive and not go through any of that and safestrap will install perfectly on 4.2.2 NC1
dude52 said:
Lmfao or you could get SELinux Mode Changer and set to permissive and not go through any of that and safestrap will install perfectly on 4.2.2 NC1
Click to expand...
Click to collapse
Thought NC1 was 4.4.kklmao on this end now
But good to know ..So SElinux mode changer will fix the safestrap issue on NC1 ?. could have saved me a whole night .. I have been cramming all this info in in one week bieng i just bought this device .. Gues that is what happens reading outdated threads.. Coming from a tmobile gs2 flashing world to this BS locked boot loader has been an experience .. What next your gonna tell me i can install a custom kernel to over clock with this Bl. Can I? lol..No but im serious
Hey, OP. Did you get everything working? I was curious if you got ss 3.72 working on NC1. I need to reflash my ROM (Hyperdrive RLS16) and was thinking I would update from NB1 to NC1 during the process if it was possible. Thanks.
SELinux Mode Changer fixes SafeStrap for NC1
Guedeaux said:
Hey, OP. Did you get everything working? I was curious if you got ss 3.72 working on NC1. I need to reflash my ROM (Hyperdrive RLS16) and was thinking I would update from NB1 to NC1 during the process if it was possible. Thanks.
Click to expand...
Click to collapse
Works fine. Just finally rooted my S4 and TWRP backed up without having to wipe/reload/restore anything at all.
TowelRoot + Safestrap-JFLTE-3.72-kk-B01.apk + ModeChanger = easy peasy Root & Restore
Phone is rooted via Towelroot. I have tried literally every recovery I can find. CWM, Philztouch, TWRP, etc. Most of them fail when I try to flash them with Odin, Safestrap simply doesn't install. What am I missing?
Safe Strap is the Only recovery for this device. It appears that the NC4 Kernel is keeping you from flashing in recovery. Look on the lats two pages of the SS thread (look for post 1240) and it will give you the proper information.
Sent from my SM-N900V using Tapatalk
phillymade said:
Safe Strap is the Only recovery for this device. It appears that the NC4 Kernel is keeping you from flashing in recovery. Look on the lats two pages of the SS thread (look for post 1240) and it will give you the proper information.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
OK, I finally got SafeStrap to work - not sure what I was doing differently this time but it worked. Got into SS bootloader, but now any ROM I try to flash, the phone goes to a black screen and locks out (have to yank battery) after the flash completes and I reboot. It goes to a black screen (off) 10 sec after the Safe Strap enabled screen. The last ROM I tried was the latest Hyperdrive which is supposed to be 900V 4.4.2 compatible?
Thanks again!
dubseven said:
OK, I finally got SafeStrap to work - not sure what I was doing differently this time but it worked. Got into SS bootloader, but now any ROM I try to flash, the phone goes to a black screen and locks out (have to yank battery) after the flash completes and I reboot. It goes to a black screen (off) 10 sec after the Safe Strap enabled screen. The last ROM I tried was the latest Hyperdrive which is supposed to be 900V 4.4.2 compatible?
Thanks again!
Click to expand...
Click to collapse
You are correct, it is 4.4.2 compatible. But its NC2 compatible. My apologies, I see you rooted with safe strap so this means you are on the official OTA NC4 witch contains the new kernel. This is why you can not flash anything. Go to this thread, and start at post #1244 this wil help get you in the right direction. http://forum.xda-developers.com/showthread.php?t=2517610&page=125
Hope this helps, and good luck
Safestrap can only flash to stock ROM at the moment until SafeStrap 3.75 comes out
Sent from my SM-N900V using XDA Free mobile app
Thanks and a Q
phillymade said:
You are correct, it is 4.4.2 compatible. But its NC2 compatible. My apologies, I see you rooted with safe strap so this means you are on the official OTA NC4 witch contains the new kernel. This is why you can not flash anything. Go to this thread, and start at post #1244 this wil help get you in the right direction. http://forum.xda-developers.com/showthread.php?t=2517610&page=125
Hope this helps, and good luck
Click to expand...
Click to collapse
I appreciate your help here. I wanted to check whether this will work on the Verizon Note 3 (SM900VVRUCNC4) Is this "NC4?"
I'd like to get to a point where I don't have to keep deferring the next google push-up. I'm a noobie. I flashed custom roms on my S3 but I can't remember how. I might have gotten TWRP working on it....for my Note 3 I just want to be able to try different roms and stay clear of google/verizon and whoever else is trying to control MY phone. I'm not cavalier about the tech. It's just that I'm learning GIS and Linux and earning a living. So I can use all the generosity I can find here.
---------- Post added at 10:39 AM ---------- Previous post was at 10:16 AM ----------
Eddie Del said:
Safestrap can only flash to stock ROM at the moment until SafeStrap 3.75 comes out
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
What is Jasmine rom 1.6?
alt230 said:
I appreciate your help here. I wanted to check whether this will work on the Verizon Note 3 (SM900VVRUCNC4) Is this "NC4?"
I'd like to get to a point where I don't have to keep deferring the next google push-up. I'm a noobie. I flashed custom roms on my S3 but I can't remember how. I might have gotten TWRP working on it....for my Note 3 I just want to be able to try different roms and stay clear of google/verizon and whoever else is trying to control MY phone. I'm not cavalier about the tech. It's just that I'm learning GIS and Linux and earning a living. So I can use all the generosity I can find here.
---------- Post added at 10:39 AM ---------- Previous post was at 10:16 AM ----------
What is Jasmine rom 1.6?
Click to expand...
Click to collapse
It is the NC4 based Custom ROM
Hello, before now i have rooted htc my touch 4g and moto razr xt912 i have also installed a couple of roms on both those phones so i am familiar with rooting and installing roms.
But I had no idea that rooting and installing roms on galaxy s5 will be this tricky so please bear with me as i tell you guys what i know so far. So i know that geohot's towelroot apk isn't working on my phone because it is of a higher firmware right? So what i need to do is downgrade my phone to a version that makes the towelroot apk work right?
The things I'm having major issues understanding are what is samsung knox exactly? also what is the full form of NE9 and N12? I also realize that i cant install clockword mod recovery so what should i use to back up the current rom on my phone incase i mess up?
Please point out if I'm asking the wrong questions and any and all help is very much appreciated so thanks in advance.
I'm guessing your not using a dev edition s5 so your bootloader is locked and also guessing your on the nk2 build (find in settings/about phone...), correct?
---------- Post added at 01:52 PM ---------- Previous post was at 01:41 PM ----------
Also what is your end goal? Ex. Looking to be rooted on lollipop with the native tether app working. If so you simply need to downgrade your kernel, use towel root v3, install busy box then safestrap, update SU and re flash the kernel you started with. That will bring you right back to where you are now but with root and ability to make a back up. Detailed explanation with software links found here, http://forum.xda-developers.com/showthread.php?t=2784880
---------- Post added at 01:59 PM ---------- Previous post was at 01:52 PM ----------
Just scroll down to "How to root NK2" and follow the instructions step by step. All the links for the software you need are below that. Just make sure you have a copy of the kernel you have now to flash back to after your done with the downgrade, root, and safestrap install. Also don't worry to much about screwing up Odin is going to be your new best friend and there is a copy of the original software on that page to restore your phone from a softbrick
Mad.Matt said:
I'm guessing your not using a dev edition s5 so your bootloader is locked and also guessing your on the nk2 build (find in settings/about phone...), correct?
---------- Post added at 01:52 PM ---------- Previous post was at 01:41 PM ----------
Also what is your end goal? Ex. Looking to be rooted on lollipop with the native tether app working. If so you simply need to downgrade your kernel, use towel root v3, install busy box then safestrap, update SU and re flash the kernel you started with. That will bring you right back to where you are now but with root and ability to make a back up. Detailed explanation with software links found here, http://forum.xda-developers.com/showthread.php?t=2784880
---------- Post added at 01:59 PM ---------- Previous post was at 01:52 PM ----------
Just scroll down to "How to root NK2" and follow the instructions step by step. All the links for the software you need are below that. Just make sure you have a copy of the kernel you have now to flash back to after your done with the downgrade, root, and safestrap install. Also don't worry to much about screwing up Odin is going to be your new best friend and there is a copy of the original software on that page to restore your phone from a softbrick
Click to expand...
Click to collapse
Well my build appears to be n12 and yes the bootloader is locked on my verizon galaxy s5.
I'm looking to root my phone and remove all verizon apps and try the roms that are available. So how can i downgrade my kernel and back up my current rom? do i have to use odin? is there a specific version of odin software for galaxy s5?
Thanks a lot for your reply.
Start with following that link I gave you and get rooted install busy box and safestrap then up date your SU and flash back to your existing kernel make a backup and you can go from there with no fear ...
Sent from my SM-G900V using Tapatalk
Mad.Matt said:
Start with following that link I gave you and get rooted install busy box and safestrap then up date your SU and flash back to your existing kernel make a backup and you can go from there with no fear ...
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
The correct order would be get root with towelroot, install supersu from playstore, update it's binaries. Reboot, then install busybody and lastly safestrap.
Yes and no I prefer to use safestrap to install the SU update rather than playstore which you will find in the instructions I provided with the link ... just follow them explicitly and you will find a quick and easy solution to your request ... not to mention the fight with fc you have to endeavor to do it his way ... but I digress. Don't take it from just me, follow the links instructions and ask any questions you need to along the way
Sent from my SM-G900V using Tapatalk
Thanks a lot for the help that was provided to me I am happy to announce that because of you guys assistance I was able to root my phone, thanks again.
Newbee with a question
Hi, I'm Maypo1, Ihope I'm not out of line in this forum,but I read it and have 1 question. I have an S5 SM-900V Kit Kat 4.4.4 with firmware ending in ANK7,because I had a fat thumb and mistakenly downloaded the first of 2 downloads to Lollypop. ? does this screw up my chances of downgrading and rooting to N12 or NGC I have already downloaded odin 3.10, and both roms from SamMobile on my laptopand am ready to try this all out.
Thank's in advance Maypo1
Maypo1 said:
Hi, I'm Maypo1, Ihope I'm not out of line in this forum,but I read it and have 1 question. I have an S5 SM-900V Kit Kat 4.4.4 with firmware ending in ANK7,because I had a fat thumb and mistakenly downloaded the first of 2 downloads to Lollypop. ? does this screw up my chances of downgrading and rooting to N12 or NGC I have already downloaded odin 3.10, and both roms from SamMobile on my laptopand am ready to try this all out.
Thank's in advance Maypo1
Click to expand...
Click to collapse
I think you should create a new thread to ask a question.