[Q] I'm rooted...now what? - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!

If you need to ask these questions you should not have rooted. Look in the general forum.
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
If you need to ask these questions you should not have rooted. Look in the general forum.
Click to expand...
Click to collapse
I freely admit that I'm new to this, so no reason to point that out. There are other reasons to root besides flashing custom ROMs, and I don't see any reason why I shouldn't have rooted. Every time I look through threads for my build, people just say that it can't be rooted (which is obviously no longer the case, since I'm successfully rooted). I just want to know what kind of capabilities I should look into, and as I understand it, the best way to do that and start tinkering is by using Safestrap.

Safestrap will allow you to flash touch wiz based roms. What firmware are you on?
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Safestrap will allow you to flash touch wiz based roms. What firmware are you on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I'm running 4.4.2, Kernel 3.4.0-1125940.

go4bacon said:
I'm running 4.4.2, Kernel 3.4.0-1125940.
Click to expand...
Click to collapse
What's your baseband?
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
What's your baseband?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I think it's I337UCUFNC1.

go4bacon said:
I think it's I337UCUFNC1.
Click to expand...
Click to collapse
You're on nc1 firmware. Look for this http://forum.xda-developers.com/showthread.php?p=51067706
Sent from my Nexus 5 using XDA Free mobile app

go4bacon said:
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
Click to expand...
Click to collapse
Safestrap 3.72...
https://www.dropbox.com/s/udgft6eu2d0fv8r/Safestrap-JFLTE-3.72-kk-B01.apk
Make sure you read read read.
After flashing a rom such as Goldeneye inrecovery dont reboot system go back to the home and flash the proper kernel modules and super user.zip. If on golden eye..As far as i know you cannot flash custom kernels

spirodave said:
Safestrap 3.72...
https://www.dropbox.com/s/udgft6eu2d0fv8r/Safestrap-JFLTE-3.72-kk-B01.apk
Click to expand...
Click to collapse
This is so frustrating. I installed the .apk successfully, but tapping "Install Recovery" doesn't seem to work. I get a "Installation Complete" pop-up, but it still shows as uninstalled and I can't boot into SS. I haven't heard of anyone having this problem before.

go4bacon said:
So I've seen these threads before, but not for this build (since this Towelroot solution is so new). Here's what's going on.
Many of you have probably heard that NC1 is now rootable via a program called Towelroot (I'm a new user so XDA won't allow me to post a link, but it's the first result on Google). I am now successfully rooted, running 4.4.2 KitKat, build number KOT49H.I337UCUFNC1.
The problem is, I have no idea where to go from here. I'm told that since the bootloaders are still locked, I can't directly flash any custom roms with common recoveries. However, I have heard of Safestrap. So here are my questions:
What version of Safestrap should I install?
What can I do with Safestrap? In other words, can I run CM, Carbon, GPE and the like?
This may be asking a little much, but how do I go about running any of the above ROMs?
I feel really dumb asking all of these basic questions, but I'll probably end up feeling a lot more stupid if I brick my phone because I didn't ask the right questions. Thanks!
Click to expand...
Click to collapse
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
go4bacon said:
This is so frustrating. I installed the .apk successfully, but tapping "Install Recovery" doesn't seem to work. I get a "Installation Complete" pop-up, but it still shows as uninstalled and I can't boot into SS. I haven't heard of anyone having this problem before.
Click to expand...
Click to collapse
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
spirodave said:
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
Click to expand...
Click to collapse
These are links .
http://forum.xda-developers.com/showthread.php?t=2692825 this is for Nb1_Stock_Rooted
http://forum.xda-developers.com/showthread.php?t=2663545 this is to downgrade
If all else fails then downgrade and get to stockrootednb1. You should have no issues using safestrap with NB1

spirodave said:
As far as i know so far you can only install safestrap compatible roms ..Aosp such as cm and others I havent tried .. Safestrap gives you an option to create multiple rom slots ..Therefore you can run multiple roms without wiping one . If you have any other ?s feel free to PM me . I have only had this phone 2 weeks and it has been a learning process with 2 bricks .. So you can imagine that i have learned the do and dont dos . Mainly it happened when i got vague answers from others.. But youll will find everyone here is willing to help in one way or another.. Just dont post in the wrong thread ..LOL
---------- Post added at 06:22 PM ---------- Previous post was at 06:14 PM ----------
Yes i understand ..I was about to throw my phone against the wall multiple times.. I can offer what has worked for me .. Downgrade to mk2. 4.3. You will get a semi functioning (No wifi or data) but thats ok .. Then you root it with kingo. And install safestrap 3.71 .. Then boot into recovery and flash Nb1_100%_Stock_Rooted.zip. Dont reboot system at that point reboot into download mode and flash the Modules. That will get you to a Stock rooted NB1 . Then there you can install 3.72 safetstrap.. this seems like a process which it is .. But it sounds like safestrap is giving you a problem with NC1.. I can confirm the method above works as i have done it multiple times.. Try to find a solution for your safestrap problem first. By the way . When you reboot your phone it should give you the option to go to recovery or system.. You dont need to choose reboot recovery.
---------- Post added at 06:25 PM ---------- Previous post was at 06:22 PM ----------
Also i only see safestrap for Nb1 not Nc1 ..Seems like it should be compatible Though
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
These are links .
http://forum.xda-developers.com/showthread.php?t=2692825 this is for Nb1_Stock_Rooted
http://forum.xda-developers.com/showthread.php?t=2663545 this is to downgrade
If all else fails then downgrade and get to stockrootednb1. You should have no issues using safestrap with NB1
Click to expand...
Click to collapse
Lmfao or you could get SELinux Mode Changer and set to permissive and not go through any of that and safestrap will install perfectly on 4.2.2 NC1

dude52 said:
Lmfao or you could get SELinux Mode Changer and set to permissive and not go through any of that and safestrap will install perfectly on 4.2.2 NC1
Click to expand...
Click to collapse
Thought NC1 was 4.4.kklmao on this end now
But good to know ..So SElinux mode changer will fix the safestrap issue on NC1 ?. could have saved me a whole night .. I have been cramming all this info in in one week bieng i just bought this device .. Gues that is what happens reading outdated threads.. Coming from a tmobile gs2 flashing world to this BS locked boot loader has been an experience .. What next your gonna tell me i can install a custom kernel to over clock with this Bl. Can I? lol..No but im serious

Hey, OP. Did you get everything working? I was curious if you got ss 3.72 working on NC1. I need to reflash my ROM (Hyperdrive RLS16) and was thinking I would update from NB1 to NC1 during the process if it was possible. Thanks.

SELinux Mode Changer fixes SafeStrap for NC1
Guedeaux said:
Hey, OP. Did you get everything working? I was curious if you got ss 3.72 working on NC1. I need to reflash my ROM (Hyperdrive RLS16) and was thinking I would update from NB1 to NC1 during the process if it was possible. Thanks.
Click to expand...
Click to collapse
Works fine. Just finally rooted my S4 and TWRP backed up without having to wipe/reload/restore anything at all.
TowelRoot + Safestrap-JFLTE-3.72-kk-B01.apk + ModeChanger = easy peasy Root & Restore

Related

MF3 stock tar files (google drive link) +guide for flashing roms

Hi, all i have all of the files you need to make your Galaxy S4 LIKE new (software wise) if you are familiar with odin and know which file goes where then use these files to un-brick or go back to comprlete stock.
this will also fix your recovery if you were someone like me who flashed twrp (dumb idea) it fixes it
https://drive.google.com/file/d/0BxvbskbifwY4d2ZiOEFfLVpHVW8/edit?usp=sharing
good luck and hope you can fix your phone with these files
PS IF THE HAS ALREADY BEEN POSTED SORRY BUT THIS IS A NEWER POST AND I KNOW THEY WORK AND ITS NOT A SCAM.
if you want a custom rom on your phone........if your bricked your phone trying to do that don't look further
http://forum.xda-developers.com/showthread.php?t=2428254
that is the thread for roms and safestrap for noobs
im not responsible if you destroy your phone...........
Never mind
hmmmm
jd1639 said:
Never mind
Click to expand...
Click to collapse
whats the never mind for.......ill delete it if you want..
DyslexicTurtle said:
Hi, all i have all of the files you need to make your Galaxy S4 LIKE new (software wise) if you are familiar with odin and know which file goes where then use these files to un-brick or go back to comprlete stock.
this will also fix your recovery if you were someone like me who flashed twrp (dumb idea) it fixes it
https://drive.google.com/file/d/0BxvbskbifwY4d2ZiOEFfLVpHVW8/edit?usp=sharing
good luck and hope you can fix your phone with these files
PS IF THE HAS ALREADY BEEN POSTED SORRY BUT THIS IS A NEWER POST AND I KNOW THEY WORK AND ITS NOT A SCAM.
if you want a custom rom on your phone........if your bricked your phone trying to do that don't look further
http://forum.xda-developers.com/showthread.php?t=2428254
that is the thread for roms and safestrap for noobs
im not responsible if you destroy your phone...........
Click to expand...
Click to collapse
Thanks for the post - I do have a question, and I apologize if this has already been answered. I got my S4 before the MF3 update. I basically locked it down, and have a custom recovery and it's rooted but stuck in MDL. This means that I never had the OTA upgrade and it never blew that weird fuse. If I odin these tar images onto my phone in its current state, is that safe? I see that there are now processes I can use to re-root my phone and then safestrap into a custom recovery. But since I never had the official MF3 update which blows the fuse permanently, will this not work? Anyone know? Maybe I should just wait for 4.3? Any help or direction is appreciated.
THANKS!
--Q
No your fine where you are just don't do an ota update and safestrap is only meant for mf3 I think u said that you have cwm....that's great don't get ride of it once you get rid of cwm and root and do the ota update then you can use safestrap but u don't need this...you don't need anything on this thread
Sent from my SGH-I337 using xda app-developers app
It works everyone...these files are perfect.im back to stock and rooting again.thanks again dyslexic
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
---------- Post added at 05:16 PM ---------- Previous post was at 05:05 PM ----------
Don't do the update stay rooted with cwm.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
no problem
jasas212 said:
It works everyone...these files are perfect.im back to stock and rooting again.thanks again dyslexic
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
---------- Post added at 05:16 PM ---------- Previous post was at 05:05 PM ----------
Don't do the update stay rooted with cwm.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
no problem i hope other people find this useful

[Q] Verizon N900V Note 3 - What recovery will work with 4.4.2?

Phone is rooted via Towelroot. I have tried literally every recovery I can find. CWM, Philztouch, TWRP, etc. Most of them fail when I try to flash them with Odin, Safestrap simply doesn't install. What am I missing?
Safe Strap is the Only recovery for this device. It appears that the NC4 Kernel is keeping you from flashing in recovery. Look on the lats two pages of the SS thread (look for post 1240) and it will give you the proper information.
Sent from my SM-N900V using Tapatalk
phillymade said:
Safe Strap is the Only recovery for this device. It appears that the NC4 Kernel is keeping you from flashing in recovery. Look on the lats two pages of the SS thread (look for post 1240) and it will give you the proper information.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
OK, I finally got SafeStrap to work - not sure what I was doing differently this time but it worked. Got into SS bootloader, but now any ROM I try to flash, the phone goes to a black screen and locks out (have to yank battery) after the flash completes and I reboot. It goes to a black screen (off) 10 sec after the Safe Strap enabled screen. The last ROM I tried was the latest Hyperdrive which is supposed to be 900V 4.4.2 compatible?
Thanks again!
dubseven said:
OK, I finally got SafeStrap to work - not sure what I was doing differently this time but it worked. Got into SS bootloader, but now any ROM I try to flash, the phone goes to a black screen and locks out (have to yank battery) after the flash completes and I reboot. It goes to a black screen (off) 10 sec after the Safe Strap enabled screen. The last ROM I tried was the latest Hyperdrive which is supposed to be 900V 4.4.2 compatible?
Thanks again!
Click to expand...
Click to collapse
You are correct, it is 4.4.2 compatible. But its NC2 compatible. My apologies, I see you rooted with safe strap so this means you are on the official OTA NC4 witch contains the new kernel. This is why you can not flash anything. Go to this thread, and start at post #1244 this wil help get you in the right direction. http://forum.xda-developers.com/showthread.php?t=2517610&page=125
Hope this helps, and good luck
Safestrap can only flash to stock ROM at the moment until SafeStrap 3.75 comes out
Sent from my SM-N900V using XDA Free mobile app
Thanks and a Q
phillymade said:
You are correct, it is 4.4.2 compatible. But its NC2 compatible. My apologies, I see you rooted with safe strap so this means you are on the official OTA NC4 witch contains the new kernel. This is why you can not flash anything. Go to this thread, and start at post #1244 this wil help get you in the right direction. http://forum.xda-developers.com/showthread.php?t=2517610&page=125
Hope this helps, and good luck
Click to expand...
Click to collapse
I appreciate your help here. I wanted to check whether this will work on the Verizon Note 3 (SM900VVRUCNC4) Is this "NC4?"
I'd like to get to a point where I don't have to keep deferring the next google push-up. I'm a noobie. I flashed custom roms on my S3 but I can't remember how. I might have gotten TWRP working on it....for my Note 3 I just want to be able to try different roms and stay clear of google/verizon and whoever else is trying to control MY phone. I'm not cavalier about the tech. It's just that I'm learning GIS and Linux and earning a living. So I can use all the generosity I can find here.
---------- Post added at 10:39 AM ---------- Previous post was at 10:16 AM ----------
Eddie Del said:
Safestrap can only flash to stock ROM at the moment until SafeStrap 3.75 comes out
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
What is Jasmine rom 1.6?
alt230 said:
I appreciate your help here. I wanted to check whether this will work on the Verizon Note 3 (SM900VVRUCNC4) Is this "NC4?"
I'd like to get to a point where I don't have to keep deferring the next google push-up. I'm a noobie. I flashed custom roms on my S3 but I can't remember how. I might have gotten TWRP working on it....for my Note 3 I just want to be able to try different roms and stay clear of google/verizon and whoever else is trying to control MY phone. I'm not cavalier about the tech. It's just that I'm learning GIS and Linux and earning a living. So I can use all the generosity I can find here.
---------- Post added at 10:39 AM ---------- Previous post was at 10:16 AM ----------
What is Jasmine rom 1.6?
Click to expand...
Click to collapse
It is the NC4 based Custom ROM

[Q] Help restoring to stable stock ROM

Hi there! Its been a while, haven't posted since some troubles with my Epic 4G.
I've been trying to go back to stock ROM from [NAE][4.4.2] Negalite WondeROM X but since its NAE I think it tripped Knox flag. The ROM ended up with some weird errors (something about android.process.acore, which I tried to fix to no avail clearing data, uninstalling apps, etc). I tried to go back to a previous stock ROM. ODIN did not want to flash the ROMs, always failed at write operation. I don't know whats the best process to follow, and whether I should flash modems, firmware, etc...
Some guidance on how to restore to a stable stock ROM so I can then flash a custom ROM based on the stable ROM installed. Thank you!
Bombillazo said:
Hi there! Its been a while, haven't posted since some troubles with my Epic 4G.
I've been trying to go back to stock ROM from [NAE][4.4.2] Negalite WondeROM X but since its NAE I think it tripped Knox flag. The ROM ended up with some weird errors (something about android.process.acore, which I tried to fix to no avail clearing data, uninstalling apps, etc). I tried to go back to a previous stock ROM. ODIN did not want to flash the ROMs, always failed at write operation. I don't know whats the best process to follow, and whether I should flash modems, firmware, etc...
Some guidance on how to restore to a stable stock ROM so I can then flash a custom ROM based on the stable ROM installed. Thank you!
Click to expand...
Click to collapse
Go in here, type in your device model and you will get a list of all available firmwares that would restore your device to factory.
http://www.sammobile.com/firmwares/
---------- Post added at 12:20 PM ---------- Previous post was at 12:18 PM ----------
Just remember don't try and download anything prior to 4.4.2 if you had ever updated to it.
BIGSAMDA1ST said:
Go in here, type in your device model and you will get a list of all available firmwares that would restore your device to factory.
http://www.sammobile.com/firmwares/
---------- Post added at 12:20 PM ---------- Previous post was at 12:18 PM ----------
Just remember don't try and download anything prior to 4.4.2 if you had ever updated to it.
Click to expand...
Click to collapse
Thanks, I'm trying (again) the stock NAE since every time I choose an older one it failed miserably.
Tried it from my laptop this time, it worked! Got stock again.
What would be the procedure to go to a custom NAE ROM now that its KNOXed...?
Yeah ,like I said if you had already updated your device to 4.4.2 there is no going back to anything previous as it will fail.
Awesome. Worked. Rooted and used wanam. Thanks a lot!
Sent from my SPH-L720 using XDA Free mobile app
Bombillazo said:
Tried it from my laptop this time, it worked! Got stock again.
What would be the procedure to go to a custom NAE ROM now that its KNOXed...?
Click to expand...
Click to collapse
You should be able to flash any 4.4.2 custom rom. Just check out the rom threads and read through them.
Here's one that's pretty solid.
http://forum.xda-developers.com/showthread.php?p=48775946
But like I said check out the threads until you find one you like and make sure to read up on it.

Need support rooting samsung verizon galaxy s5 sm-g900v 4.4.4

Hello, before now i have rooted htc my touch 4g and moto razr xt912 i have also installed a couple of roms on both those phones so i am familiar with rooting and installing roms.
But I had no idea that rooting and installing roms on galaxy s5 will be this tricky so please bear with me as i tell you guys what i know so far. So i know that geohot's towelroot apk isn't working on my phone because it is of a higher firmware right? So what i need to do is downgrade my phone to a version that makes the towelroot apk work right?
The things I'm having major issues understanding are what is samsung knox exactly? also what is the full form of NE9 and N12? I also realize that i cant install clockword mod recovery so what should i use to back up the current rom on my phone incase i mess up?
Please point out if I'm asking the wrong questions and any and all help is very much appreciated so thanks in advance.
I'm guessing your not using a dev edition s5 so your bootloader is locked and also guessing your on the nk2 build (find in settings/about phone...), correct?
---------- Post added at 01:52 PM ---------- Previous post was at 01:41 PM ----------
Also what is your end goal? Ex. Looking to be rooted on lollipop with the native tether app working. If so you simply need to downgrade your kernel, use towel root v3, install busy box then safestrap, update SU and re flash the kernel you started with. That will bring you right back to where you are now but with root and ability to make a back up. Detailed explanation with software links found here, http://forum.xda-developers.com/showthread.php?t=2784880
---------- Post added at 01:59 PM ---------- Previous post was at 01:52 PM ----------
Just scroll down to "How to root NK2" and follow the instructions step by step. All the links for the software you need are below that. Just make sure you have a copy of the kernel you have now to flash back to after your done with the downgrade, root, and safestrap install. Also don't worry to much about screwing up Odin is going to be your new best friend and there is a copy of the original software on that page to restore your phone from a softbrick
Mad.Matt said:
I'm guessing your not using a dev edition s5 so your bootloader is locked and also guessing your on the nk2 build (find in settings/about phone...), correct?
---------- Post added at 01:52 PM ---------- Previous post was at 01:41 PM ----------
Also what is your end goal? Ex. Looking to be rooted on lollipop with the native tether app working. If so you simply need to downgrade your kernel, use towel root v3, install busy box then safestrap, update SU and re flash the kernel you started with. That will bring you right back to where you are now but with root and ability to make a back up. Detailed explanation with software links found here, http://forum.xda-developers.com/showthread.php?t=2784880
---------- Post added at 01:59 PM ---------- Previous post was at 01:52 PM ----------
Just scroll down to "How to root NK2" and follow the instructions step by step. All the links for the software you need are below that. Just make sure you have a copy of the kernel you have now to flash back to after your done with the downgrade, root, and safestrap install. Also don't worry to much about screwing up Odin is going to be your new best friend and there is a copy of the original software on that page to restore your phone from a softbrick
Click to expand...
Click to collapse
Well my build appears to be n12 and yes the bootloader is locked on my verizon galaxy s5.
I'm looking to root my phone and remove all verizon apps and try the roms that are available. So how can i downgrade my kernel and back up my current rom? do i have to use odin? is there a specific version of odin software for galaxy s5?
Thanks a lot for your reply.
Start with following that link I gave you and get rooted install busy box and safestrap then up date your SU and flash back to your existing kernel make a backup and you can go from there with no fear ...
Sent from my SM-G900V using Tapatalk
Mad.Matt said:
Start with following that link I gave you and get rooted install busy box and safestrap then up date your SU and flash back to your existing kernel make a backup and you can go from there with no fear ...
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
The correct order would be get root with towelroot, install supersu from playstore, update it's binaries. Reboot, then install busybody and lastly safestrap.
Yes and no I prefer to use safestrap to install the SU update rather than playstore which you will find in the instructions I provided with the link ... just follow them explicitly and you will find a quick and easy solution to your request ... not to mention the fight with fc you have to endeavor to do it his way ... but I digress. Don't take it from just me, follow the links instructions and ask any questions you need to along the way
Sent from my SM-G900V using Tapatalk
Thanks a lot for the help that was provided to me I am happy to announce that because of you guys assistance I was able to root my phone, thanks again.
Newbee with a question
Hi, I'm Maypo1, Ihope I'm not out of line in this forum,but I read it and have 1 question. I have an S5 SM-900V Kit Kat 4.4.4 with firmware ending in ANK7,because I had a fat thumb and mistakenly downloaded the first of 2 downloads to Lollypop. ? does this screw up my chances of downgrading and rooting to N12 or NGC I have already downloaded odin 3.10, and both roms from SamMobile on my laptopand am ready to try this all out.
Thank's in advance Maypo1
Maypo1 said:
Hi, I'm Maypo1, Ihope I'm not out of line in this forum,but I read it and have 1 question. I have an S5 SM-900V Kit Kat 4.4.4 with firmware ending in ANK7,because I had a fat thumb and mistakenly downloaded the first of 2 downloads to Lollypop. ? does this screw up my chances of downgrading and rooting to N12 or NGC I have already downloaded odin 3.10, and both roms from SamMobile on my laptopand am ready to try this all out.
Thank's in advance Maypo1
Click to expand...
Click to collapse
I think you should create a new thread to ask a question.

SM-G530AZ Downgrade??

Does anyone know how to downgrade from 5.1.1 on SM-G530AZ to 4.4.4. Thanks
wally86 said:
Does anyone know how to downgrade from 5.1.1 on SM-G530AZ to 4.4.4. Thanks
Click to expand...
Click to collapse
+1
any luck?
wally86 said:
Does anyone know how to downgrade from 5.1.1 on SM-G530AZ to 4.4.4. Thanks
Click to expand...
Click to collapse
any luck with figuring out how to downgrade?
Should i upgrade to 5.1.1 or stay at 4.2.2? I am not rooted yet cause we don't have a custom recovery so just wanted some opinions. Thanks
dlongnasty said:
Should i upgrade to 5.1.1 or stay at 4.2.2? I am not rooted yet cause we don't have a custom recovery so just wanted some opinions. Thanks
Click to expand...
Click to collapse
If your on 4.2.2 then stay on it. Btw you can root and have a custom recovery on sm-g530. The bootloader is locked on 5.1.1 which definitely decreases the chance for custom recovery.
G530az is what I have the root method for the g530 I'm not sure will work. At least no one has said it will
Illyakulinych said:
If your on 4.2.2 then stay on it. Btw you can root and have a custom recovery on sm-g530. The bootloader is locked on 5.1.1 which definitely decreases the chance for custom recovery.
Click to expand...
Click to collapse
I have not seen any evidence that the bootloader is unlocked on the kitkat firmware for the G530AZ as I have not seen any custom rom or recovery for it either I am currently on 5.1.1 but I would like to see what your talking about on the kitkat firmware where would one find custom recovery and such for this variant on kitkat?
toxinburn said:
I have not seen any evidence that the bootloader is unlocked on the kitkat firmware for the G530AZ as I have not seen any custom rom or recovery for it either I am currently on 5.1.1 but I would like to see what your talking about on the kitkat firmware where would one find custom recovery and such for this variant on kitkat?
Click to expand...
Click to collapse
On my old s4 and s5 knox came preloaded but i can't find the knox apk on my grand prime. I'm not a newb when it comes to this but i have seen maybe 2 people say they have root without using kingroot and I'm not doing that. I guess I'll wait till we get a revovery. If I could find the source code I could compile a rom but i have never even tried a recovery. I guess I just want the easy way out.
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
toxinburn said:
I have not seen any evidence that the bootloader is unlocked on the kitkat firmware for the G530AZ as I have not seen any custom rom or recovery for it either I am currently on 5.1.1 but I would like to see what your talking about on the kitkat firmware where would one find custom recovery and such for this variant on kitkat?
Click to expand...
Click to collapse
In the above post I'm saying that I don't see a trace of knox on 4.2.2 that's why I'm wondering if I should take the update
Well their is a recovery already for 5.1.1 but it fails the security checks that are in place unfortunately so its dead in the water for this variant unless someone that is uber dev can figure out how the heck to unlock it lol.
---------- Post added at 07:43 PM ---------- Previous post was at 07:40 PM ----------
dlongnasty said:
On my old s4 and s5 knox came preloaded but i can't find the knox apk on my grand prime. I'm not a newb when it comes to this but i have seen maybe 2 people say they have root without using kingroot and I'm not doing that. I guess I'll wait till we get a revovery. If I could find the source code I could compile a rom but i have never even tried a recovery. I guess I just want the easy way out.
---------- Post added at 07:40 PM ---------- Previous post was at 07:38 PM ----------
In the above post I'm saying that I don't see a trace of knox on 4.2.2 that's why I'm wondering if I should take the update
Click to expand...
Click to collapse
Ahh i see, well if its like 5.1.1 at all knox is there but you cant really access it, I have been messing around with some of the sql databases and have found some things of interest and also they lead me to believe that their is some kind of variation of knox installed but, you can use triangle away from the app store to fool odin mode and the device into believing your running stock however when you try to do update from the update settings in the device it catches it there, but still nothing changes on the reboot splash screen etc. oddly enough.
Yeah that's not me. I don't know how different building a recovery is from a kernel or rom but as I said I have never even tried.
---------- Post added at 07:46 PM ---------- Previous post was at 07:44 PM ----------
I guess we just keep waiting. I just want root for the ram partition and link 2 sd. Wouldn't mind a custom rom but.....
Ya we have root on 5.1.1 also although it's not ideal but using kingroot does get it done then you can use supersume app to remove that junk and replace with supersu.
Sent from my SAMSUNG-SM-G530AZ using Tapatalk
sm-g530AZ downgrade prep for root access
[QOTE=dlongnasty;65261310]Yeah that's not me. I don't know how different building a recovery is from a kernel or rom but as I said I have never even tried.
---------- Post added at 07:46 PM ---------- Previous post was at 07:44 PM ----------
I guess we just keep waiting. I just want root for the ram partition and link 2 sd. Wouldn't mind a custom rom but.....[/QUOTE]
I just downgraded from 5.1.1 QEZ to 5.1.1 OJ4 and looking to see how far it will allow me to go before running into some road block.

Categories

Resources