Hello all
Last week I flashed my GT-I9505 a CyanogenMod 10.2 and thus voided my warranty (Knox is 0x1).
Now I regret doing it and I wanna badly go back to stock rom and receive Kies and OTA updates from Samsung and so on.
Is there a way to come back to stock rom 4.3 after I tripped the Knox flag and receive updates?
I heard that when you try to flash stock rom after Knox is 0x1 you gonna brick your device.
Please help.
Thanks in advance
Nothing to worry dear you can go back to stock and you will get OTA also and if done properly unroot you will not brick device
Sent from my GT-I9500 using xda app-developers app
sunnybehl said:
Nothing to worry dear you can go back to stock and you will get OTA also and if done properly unroot you will not brick device
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the quick reply.
I do worry a lot because this device cost me a lot.
What are the steps to unroot safely and goto 4.3 with OTA and KIES updates?
Just as I would do if I were on stock? Put the file in PDA and all the normal steps?
Or do I need to do something extra now?
As you have downloaded cf autoroot now you have to download stock file of your area or location.go to setting see the built version download it from Sammobile site your area built then flash via odin putting that in pda and start odin
Sent from my GT-I9500 using xda app-developers app
sunnybehl said:
As you have downloaded cf autoroot now you have to download stock file of your area or location.go to setting see the built version download it from Sammobile site your area built then flash via odin putting that in pda and start odin
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
I didn't use CF-Autoroot. I installed CyanogenMod on my device using their Installer.
Ok first go to settings then more from there go to about phone, click 10 times on kernel tab you will get developer mode activate then press back key, go to developer mode activate it then debugging mode enable it.then download your area firmware, odin after download put your phone in download mode flash via odin
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 08:31 PM ---------- Previous post was at 08:31 PM ----------
Google it how to unroot s4 device
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 08:33 PM ---------- Previous post was at 08:31 PM ----------
Press tks button if I helped you
Sent from my GT-I9500 using xda app-developers app
sunnybehl said:
Ok first go to settings then more from there go to about phone, click 10 times on kernel tab you will get developer mode activate then press back key, go to developer mode activate it then debugging mode enable it.then download your area firmware, odin after download put your phone in download mode flash via odin
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 08:31 PM ---------- Previous post was at 08:31 PM ----------
Google it how to unroot s4 device
Sent from my GT-I9500 using xda app-developers app
---------- Post added at 08:33 PM ---------- Previous post was at 08:31 PM ----------
Press tks button if I helped you
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
OK thanks. Now that when I'll go back to stock and get OTA and KIES updates what will the Knox serve for?
I thought having the Knox meaning I can't get back to stock and not receive updates.
Meyhemg said:
OK thanks. Now that when I'll go back to stock and get OTA and KIES updates what will the Knox serve for?
I thought having the Knox meaning I can't get back to stock and not receive updates.
Click to expand...
Click to collapse
knox is so they can see when you send your device in that the warrenty is void.
other than that knox does not bother you (apart from downgrading baseband)
djgalning said:
knox is so they can see when you send your device in that the warrenty is void.
other than that knox does not bother you (apart from downgrading baseband)
Click to expand...
Click to collapse
Thanks. So if I do not intend on downgrading baseband and don't have problems with losing my warranty then all is OK?
Meyhemg said:
Thanks. So if I do not intend on downgrading baseband and don't have problems with losing my warranty then all is OK?
Click to expand...
Click to collapse
yep
My device is 0x1 and i am freely installing roms as i please, including going back to stock
djgalning said:
yep
My device is 0x1 and i am freely installing roms as i please, including going back to stock
Click to expand...
Click to collapse
Good, thanks.
Now I wanted to ask you one more question.
As you know, there are roms which do not include Knox in their bootloader. Examples of these are Phoenix and Arrow roms.
What I wanted to ask is if I decide to install one of these roms which does not include Knox, will it delete the Knox out of my bootloader? And on the next time I will install stock rom 4.3 it will show Knox 0x0 as if it were never there?
Thanks
One vital step has been missed if you want to receive OTA: You must reset flash counter using Triangle Away app.
Sent from my GT-I9505 using XDA Premium HD app
Obagleyfreer said:
One vital step has been missed if you want to receive OTA: You must reset flash counter using Triangle Away app.
Sent from my GT-I9505 using XDA Premium HD app
Click to expand...
Click to collapse
OK. Can you please answer my latest question?
Will installing one of the roms which does not include Knox will remove the Knox out of my bootloader and on the next time I would install stock rom it will be 0x0?
Meyhemg said:
OK. Can you please answer my latest question?
Will installing one of the roms which does not include Knox will remove the Knox out of my bootloader and on the next time I would install stock rom it will be 0x0?
Click to expand...
Click to collapse
There are a few unconfirmed reports of people resetting knox, but until its proven i doubt it...
From what is said its impossible to remove, maybe at some point someone will get it cracked, but knox is still new.
Help
djgalning said:
yep
My device is 0x1 and i am freely installing roms as i please, including going back to stock
Click to expand...
Click to collapse
Hey i got the same issue like the guy that posted this thread, i want to go back to stock rom ... which stock should i download from sammobile? 4.2.2 or 4.3 ... cause i have the 4.2.2 file downloaded, tried to install and in odin it said failed XD, had to reinstall cyanogenmod 11 :S.
Deleted
Forgot there is stock 4.2.2 with Knox.
Sent from my GT-I9505 using xda app-developers app
Meyhemg said:
OK. Can you please answer my latest question?
Will installing one of the roms which does not include Knox will remove the Knox out of my bootloader and on the next time I would install stock rom it will be 0x0?
Click to expand...
Click to collapse
Knox is there to stay for now and this will not work. If something so simple did work i am sure everyone would be doing it to remove knox
help same issue :c
XDAfollower89 said:
Hey i got the same issue like the guy that posted this thread, i want to go back to stock rom ... which stock should i download from sammobile? 4.2.2 or 4.3 ... cause i have the 4.2.2 file downloaded, tried to install and in odin it said failed XD, had to reinstall cyanogenmod 11 :S.
Click to expand...
Click to collapse
heyy man i have same problem , i have knox 0x1 and when i try installing stock firmware it wont let me it fails .. please help i really need to get back to the stock firmware :///
i was on 4.3 rooted today, device status : CUSTOM... wasn't able to ota or anything, instaled triangle away, reseted counter ( after that device still says custom ) , in superSU go to full unroot option, wait until it finishes, reboot... flash stock 4.4.2 through odin, device status official
Hi, i flash back to STOCK. It's working but I need to verify my Samsung account but i totally forgot which email i used. Now i cannot go back to stock except flash again to CUSTOM.
Anyone please help.
Related
Hello guys,
I recently flashed Wanamlite 3.0 and I wish to flash stock 4.2.2 .
what should I do to get it to work properly again? Doing that because I need to send the device to the lab. I want my phone as I bought it in the first day- unrooted.
thank you all.
royts2007 said:
Hello guys,
I recently flashed Wanamlite 3.0 and I wish to flash stock 4.2.2 .
what should I do to get it to work properly again? Doing that because I need to send the device to the lab. I want my phone as I bought it in the first day- unrooted.
thank you all.
Click to expand...
Click to collapse
Hi,
Look HERE
malybru said:
Hi,
Look HERE
Click to expand...
Click to collapse
I know the steps. Just wanted to know if its ok to flash stock 4.2 on 4.3
It helped
royts2007 said:
I know the steps. Just wanted to know if its ok to flash stock 4.2 on 4.3
It helped
Click to expand...
Click to collapse
Hi,
You should be fine to flash 4.2.2 , if the ROM you are on does not contain the knox bootloader.
malybru said:
Hi,
You should be fine to flash 4.2.2 , if the ROM you are on does not contain the knox bootloader.
Click to expand...
Click to collapse
And if it does?
What about the wanamlite 3.0 ? Does it contain the knox bootloader? I deleted al knox apps from System/apps with root file manager.
My device is i9500.
royts2007 said:
And if it does?
What about the wanamlite 3.0 ? Does it contain the knox bootloader? I deleted al knox apps from System/apps with root file manager.
My device is i9500.
Click to expand...
Click to collapse
As long as your device did not come with bootloader, you can't have it unless you flashed official samsung firmware
Sent from my GT-N5110 using Tapatalk
Williamharv said:
As long as your device did not come with bootloader, you can't have it unless you flashed official samsung firmware
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
So no problem flash it?
nope. no problem. just make sure u didnt flash official samsung with knox
jarold143 said:
nope. no problem. just make sure u didnt flash official samsung with knox
Click to expand...
Click to collapse
Before flashing wanamlite3.0 I flashed stock 4.3, russia. Its with knox..
Sent from my Nexus 7 using xda app-developers app
Well? Any comments? Simple question: is it ok to flash stock 4.2 on Wanamlite 3.0(4.3)? Before flashing Wanam i flashed stock 4.3(russia)
Yes. Wipe first though.
royts2007 said:
And if it does?
What about the wanamlite 3.0 ? Does it contain the knox bootloader? I deleted al knox apps from System/apps with root file manager.
My device is i9500.
Click to expand...
Click to collapse
Try to go to download mode.. power+volume down+homebutton.. if you see words with knox 0x0 or 0x1 in the upper right corner of the screen then you got knox.. if none then your still in the old bootloader..
hope it helps..
---------- Post added at 07:47 PM ---------- Previous post was at 07:42 PM ----------
jserrano0628 said:
Try to go to download mode.. power+volume down+homebutton.. if you see words with knox 0x0 or 0x1 in the upper right corner of the screen then you got knox.. if none then your still in the old bootloader..
hope it helps..
Click to expand...
Click to collapse
If you do not have knox try to revert back to stock.. by downloading stock firmware at SAMobile.com for your handset and country without knox.. and flash via odin..but make sure to reset flash counter first to make it official.. then after send it to the lab..
jserrano0628 said:
Try to go to download mode.. power+volume down+homebutton.. if you see words with knox 0x0 or 0x1 in the upper right corner of the screen then you got knox.. if none then your still in the old bootloader..
hope it helps..
---------- Post added at 07:47 PM ---------- Previous post was at 07:42 PM ----------
If you do not have knox try to revert back to stock.. by downloading stock firmware at SAMobile.com for your handset and country without knox.. and flash via odin..but make sure to reset flash counter first to make it official.. then after send it to the lab..
Click to expand...
Click to collapse
You were very helpful. Thank you.
Wait is over for my Indian bro......:good:
http://www.sammobile.com/2013/11/19...eives-official-android-4-3-jelly-bean-update/
jdomadia said:
Wait is over for my Indian bro......:good:
http://www.sammobile.com/2013/11/19...eives-official-android-4-3-jelly-bean-update/
Click to expand...
Click to collapse
Yeah...
Here we go!
http://www.sammobile.com/firmwares/1/?model=GT-N7100&pcode=0#firmware
Same as last leaked ))
good that its the same coz dev has already started on it
does it raise knox number
It has KNOX, so obviously it does if you don't play by their rules.
And as suspected; no Note3 features.
For me; no thanks.
Waiting for knox-free, note3 modded ROMs.
So leak is official
Of official was leak ?
Sent from my GT-N7100 using xda premium
I have a rooted Note 2, so I cannot get it of course via OTA.
IS where a way to install this via mobile odin Pro?
Any thing I need to take care?
---------- Post added at 04:06 PM ---------- Previous post was at 04:06 PM ----------
I have a rooted Note 2, so I cannot get it of course via OTA.
IS where a way to install this via mobile odin Pro?
Any thing I need to take care?
tsk1979 said:
I have a rooted Note 2, so I cannot get it of course via OTA.
IS where a way to install this via mobile odin Pro?
Any thing I need to take care?
---------- Post added at 04:06 PM ---------- Previous post was at 04:06 PM ----------
I have a rooted Note 2, so I cannot get it of course via OTA.
IS where a way to install this via mobile odin Pro?
Any thing I need to take care?
Click to expand...
Click to collapse
I wouldn't flash this ROM via ODIN. Some people reported installation failure and KNOX warranty void flags. Fix your Custom status with TriangleAway. Then you will be able to update over OTA, if it is already available for your provider. However, even so, I wouldn't recommend flashing this or updating. It has KNOX so you will not be able to go back if this is buggy, and you will not be able to root without loosing warranty.
Already some ppl has updated in india & reported as buttery smooth.
Can someone tell me if this update has emoji on keyboard?
Enviado de meu GT-I9505 usando Tapatalk
Update available in india of 700mb :thumbup:
Sent from my GT-N7100 using xda premium
estugarda said:
It has KNOX, so obviously it does if you don't play by their rules.
And as suspected; no Note3 features.
For me; no thanks.
Waiting for knox-free, note3 modded ROMs.
Click to expand...
Click to collapse
Estugarda from PCE ? xulos is here
Btw i know it has knox, i want to know will it raise counter if i flash it via ODIN ?
chuck it
No new S Pen features, or the new S Note?
#disappoint
ViD0 said:
Estugarda from PCE ? xulos is here
Btw i know it has knox, i want to know will it raise counter if i flash it via ODIN ?
Click to expand...
Click to collapse
Yes, it's me.
Well, I'm not sure about raising the counter since I didn't try it myself. Some people reported it. Too early to tell.
It would be logical to make it so that it doesn't raise the flag for the first time. On the other hand, Samsung isn't really logical lately.
jdomadia said:
Wait is over for my Indian bro......:good:
http://www.sammobile.com/2013/11/19...eives-official-android-4-3-jelly-bean-update/
Click to expand...
Click to collapse
That link is for the N7105 mate not the N7100
Correct link:
http://www.sammobile.com/2013/11/19...eives-official-android-4-3-jelly-bean-update/
estugarda said:
Yes, it's me.
Well, I'm not sure about raising the counter since I didn't try it myself. Some people reported it. Too early to tell.
It would be logical to make it so that it doesn't raise the flag for the first time. On the other hand, Samsung isn't really logical lately.
Click to expand...
Click to collapse
So that means that we cant use ODIN anymore to upgrade our officially FWs? Im on stock 4.1.2 and i want to upgrade to 4.3 via ODIN and my knox counter will be 1 ? thats a cr**
estugarda said:
I wouldn't flash this ROM via ODIN. Some people reported installation failure and KNOX warranty void flags. Fix your Custom status with TriangleAway. Then you will be able to update over OTA, if it is already available for your provider. However, even so, I wouldn't recommend flashing this or updating. It has KNOX so you will not be able to go back if this is buggy, and you will not be able to root without loosing warranty.
Click to expand...
Click to collapse
Thanks for your reply. I reset the counter via triangle away. But I am not sure how to fix custom status and then get OTA updata?
ViD0 said:
So that means that we cant use ODIN anymore to upgrade our officially FWs? Im on stock 4.1.2 and i want to upgrade to 4.3 via ODIN and my knox counter will be 1 ? thats a cr**
Click to expand...
Click to collapse
As I said; I'm not sure about that, since I didn't try.
You should be able to flash it via ODIN. The question is; will it trigger the flag...? Some people said so. I don't know and certainly won't try. I'm waiting for knox-free...
tsk1979 said:
Thanks for your reply. I reset the counter via triangle away. But I am not sure how to fix custom status and then get OTA updata?
Click to expand...
Click to collapse
Triangle Away should fix the status. You must reastart your phone any give it few minutes. It doesn't always work, but mostly yes. There are also few settings in Triangle Away. Allow tracker to run and System modified workaround. Experiment with those. And remember to leave your phone alone for few minutes before you check the status. There is a reason for that.
It certainly works for me. I'm rooted, and get OTAs.
estugarda said:
As I said. I'm not sure about that.
Triangle Away should fix the status. You must reastart your phone any give it few minutes. It doesn't always work, but mostly yes. There are also few settings in Triangle Away. Allow tracker to run and System modified workaround. Experiment with those. And remember to leave your phone alone for few minutes before you check the status. There is a reason for that.
It certainly works for me. I'm rooted, and get OTAs.
Click to expand...
Click to collapse
Im always on stock so i dont have to reset with triangle away so my q is still : "So that means that we cant use ODIN anymore to upgrade our officially FWs? Im on stock 4.1.2 and i want to upgrade to 4.3 via ODIN and my knox counter will be 1 ? thats a cr**"
waiting for someone to confirm or deny.
Hello everyone,
I have Galaxy S4 GT-I9505 and using CyanogenMod's installer version a few months now.
CyanogenMod's installer has A LOT of problems and I had enough of it and want to go back to stock.
Before I moved to CM I had 4.3 and also Knox bootloader so it went to 0x1 after CM's installation.
I want to ask can I go to stock 4.3 even that my Knox is 0x1?
Do I need to use TriangleAway? If so, how?
I understood that TriangleAway requires Samsung's official kernel but I have the kernel of CM now.
Anyway, what do I need to do?
Thanks in advance
Meyhemg said:
Hello everyone,
I have Galaxy S4 GT-I9505 and using CyanogenMod's installer version a few months now.
CyanogenMod's installer has A LOT of problems and I had enough of it and want to go back to stock.
Before I moved to CM I had 4.3 and also Knox bootloader so it went to 0x1 after CM's installation.
I want to ask can I go to stock 4.3 even that my Knox is 0x1?
Do I need to use TriangleAway? If so, how?
I understood that TriangleAway requires Samsung's official kernel but I have the kernel of CM now.
Anyway, what do I need to do?
Thanks in advance
Click to expand...
Click to collapse
Find your stock rom specifically the one that is your region. If your phone is for example like mine, i9500 XSE which is the first three letters of Indonesia then get that specific stock file.
It's probably around 1.4 gigs. It downloads very slow. After that open Odin flash the stock rom, and your good to go. I've bricked numerous times and all I've done was revert back like this. No problems.
I don't know if you can put the stock rom in your custom recovery and flash it there, I haven't tried it yet just run Odin in administrator mode, insert the stock rom, go into download mode on your phone by pressing - vol and power, then click start.
Wait.
Stock.
Done,
Sent from my iPad using Tapatalk
Drasztic said:
Find your stock rom specifically the one that is your region. If your phone is for example like mine, i9500 XSE which is the first three letters of Indonesia then get that specific stock file.
It's probably around 1.4 gigs. It downloads very slow. After that open Odin flash the stock rom, and your good to go. I've bricked numerous times and all I've done was revert back like this. No problems.
I don't know if you can put the stock rom in your custom recovery and flash it there, I haven't tried it yet just run Odin in administrator mode, insert the stock rom, go into download mode on your phone by pressing - vol and power, then click start.
Wait.
Stock.
Done,
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Thanks, but don't I need to use TriangleAway to reset binary counter so that I'll be able to receive future updates from Samsung?
Meyhemg said:
Thanks, but don't I need to use TriangleAway to reset binary counter so that I'll be able to receive future updates from Samsung?
Click to expand...
Click to collapse
I may be wrong on this one but, if you use the auto CF root method I don't think there's a way to use the triangle method.
Therefore you're stuck on Knox. I could be wrong but I'm leaning on 70% being right..
Sent from my iPad using Tapatalk
Meyhemg said:
Thanks, but don't I need to use TriangleAway to reset binary counter so that I'll be able to receive future updates from Samsung?
Click to expand...
Click to collapse
I guess the binary counter is hidden somewhere. And for updates you can get OTA kies updates if you are havin stock recovery. One last thing Triangle away doesnt supports I9500.
All the best.
Mandark52 said:
I guess the binary counter is hidden somewhere. And for updates you can get OTA kies updates if you are havin stock recovery. One last thing Triangle away doesnt supports I9500.
All the best.
Click to expand...
Click to collapse
Thanks.
I installed stock BTU and now my device status shows "Official" and also in download mode, without using TriangleAway.
Also, Kies works with my device again and recognizes it.
Meyhemg said:
Thanks.
I installed stock BTU and now my device status shows "Official" and also in download mode, without using TriangleAway.
Also, Kies works with my device again and recognizes it.
Click to expand...
Click to collapse
Yes it says official but your knox counter might be already 0x01. If so, you won't be able to update your device via Kies anymore. You can always download the updates anyway.
cheers ~
deandoi said:
Yes it says official but your knox counter might be already 0x01. If so, you won't be able to update your device via Kies anymore. You can always download the updates anyway.
cheers ~
Click to expand...
Click to collapse
But when I connect my phone to Kies it does recognize my phone and says I have the latest firmware and it doesn't shoe any sign that I won't be able to update through it.
I think you're mistaken with the binary counter. If the binary counter wasn't 0 and showed custom in download mode and settings only then I couldn't update via Kies.
deandoi said:
Yes it says official but your knox counter might be already 0x01. If so, you won't be able to update your device via Kies anymore. You can always download the updates anyway.
cheers ~
Click to expand...
Click to collapse
If you have a custom recovery then you wont be able to update via Kies or OTA.
Sent from my OCTA CORE I9500
Meyhemg said:
But when I connect my phone to Kies it does recognize my phone and says I have the latest firmware and it doesn't shoe any sign that I won't be able to update through it.
I think you're mistaken with the binary counter. If the binary counter wasn't 0 and showed custom in download mode and settings only then I couldn't update via Kies.
Click to expand...
Click to collapse
Oh yeah. My mistake.
Sent from my GT-I9500 using XDA Premium 4 mobile app
deandoi said:
Oh yeah. My mistake.
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
PHEW. I thought it's the end of updates for my device.
What I did understand is that I won't be able to use Knox app on the phone. right?
Meyhemg said:
PHEW. I thought it's the end of updates for my device.
What I did understand is that I won't be able to use Knox app on the phone. right?
Click to expand...
Click to collapse
Yep. You won't be able to use them. I disable them anyway.
Sent from my GT-I9500 using XDA Premium 4 mobile app
this phone was rooted but now i flash a stock rom again to unroot..... plz help.... how to get ota updates from now?
Sent from my GT-I9500
aayushkhajuria2842 said:
this phone was rooted but now i flash a stock rom again to unroot..... plz help.... how to get ota updates from now?
Sent from my GT-I9500
Click to expand...
Click to collapse
Why do you want ota when you can flash via odin?
Use wanam xposed while being on root and change the thing to official (xposed->security) Might work.
Plus see if your custom counts are nil. (That's not possible as of now i think.)
"If someone helps, never forget to hit thanks ? "
dont want to download 1.5 gb every time where ota will take less time....... triangle away is not supported so is there any other way
Sent from my GT-I9500 using XDA Free mobile app
DeepankarS said:
Why do you want ota when you can flash via odin?
Use wanam xposed while being on root and change the thing to official (xposed->security) Might work.
Plus see if your custom counts are nil.
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
im not rooted at this time
Sent from my GT-I9500
aayushkhajuria2842 said:
im not rooted at this time
Sent from my GT-I9500
Click to expand...
Click to collapse
There are not much changes with everytime.
Im on NH4 till date and did not bother to flash things.
If you want to try a rom relating to a particular firmware..you can just flash/update the bootloader of your phone
And most of the roms function on the same firmware. A few of the devs use different bootloaders.
And yes. If youre on an updated bootloader, you cannot downgrade
Rest use wanam xposed to change your value from custom to official. That is the only way I can think of. You need root.
Flash philz. Flash deknox script. Reroot via philz. Use wanam xposed.
Because maybe under settings-->about phone the official thing is set to custom.
"If someone helps, never forget to hit thanks ? "
---------- Post added at 09:13 AM ---------- Previous post was at 09:05 AM ----------
Ohh and i forgot to mention.
If an OTA stops in between a flash (very common and frequent). You still need an odin flashable file
And generally samsung sends OTA updates when most of the world is done with the upgrade via Odin. Nobody gets it on day one of release (a few of them are lucky lets not talk about them)
And we know what samsung does to its Indian customers.
(Ive just received OTA twice. One on Note2 when I had it and the other on S4 relating to knox 1.0 to 2.0)
They fool the sh|t out of you at times.
"If someone helps, never forget to hit thanks ? "
Hello everybody
This is my first thread here in XDA
I've installed 5.0 Lollipop Beta in my N9005 and it works snappy and fast. I've used this build for 3 or 4 complete cycles of battery and it really works very well. Now i've decided to install TWRP an SuperSU to delete some bloatware and in download mode I can see a new number in my Knox 0x1 counter (see pictures attached).
Anybody can explain to me what does it mean? Really it doesn't matter so much to me cause I've tripped my Knox from day one but I didn't know about this kind of counter
Any thoughts?
(sorry for my english)
Nothing on hard or software. Because you flashed a custom recovery you got 0x1 knox. You no longer have warrenty on your device....
Sent from my SM-N910C using XDA Premium 4 mobile app
TonyM77 said:
Nothing on hard or software. Because you flashed a custom recovery you got 0x1 knox. You no longer have warrenty on your device....
Sent from my SM-N910C using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My friend I had 0x1 on JB and KK and now I have 0x1 (2) can you see the diference?
Have you flashed that Lollipop beta with odin and using pit?
I think this is all about new bootloader
I have a 3 there lol, still no warrenty left
Sent from my SM-N910C using XDA Premium 4 mobile app
---------- Post added at 05:46 PM ---------- Previous post was at 05:45 PM ----------
I flashed maybe 25 roms total, had different boatloaders, flashed much baseband etc...
Sent from my SM-N910C using XDA Premium 4 mobile app
Ok I can confirm if you flash a 4 archives KK rom using Odin you "revert" to Knox 0x1
:laugh:
I got the 5.0 TW flashed with odin, used pit and updated bootloader.. I still have 0x1
New flash counter i guess someone alert @Chainfire
I think it's the old "Custom Binary Download" counter that first appeared in the Galaxy S2 (if I'm not wrong). Someone should try Triangle Away to reset that counter. However, 0x1 will still remain active .
Edit: This is what I'm talking about.
Super-Veloce said:
I got the 5.0 TW flashed with odin, used pit and updated bootloader.. I still have 0x1
Click to expand...
Click to collapse
This counter only gets started when you try to root or install recovery with Lollipop bootloader.
ionutzm05 said:
I think it's the old "Custom Binary Download" counter that first appeared in the Galaxy S2 (if I'm not wrong). Someone should try Triangle Away to reset that counter. However, 0x1 will still remain active .
Edit: This is what I'm talking about.
Click to expand...
Click to collapse
I think this is not that kind of counter my friend. I've try to reset it with latest version of Triangle Away and it have broke my system. The only solution is to install and comebak to 4.4.2 again. Please don't try that until @Chainfire gets an answer.
Segamalaga said:
This counter only gets started when you try to root or install recovery with Lollipop bootloader.
Click to expand...
Click to collapse
I have flashed a custom recovery and after that superSU 2.42
I had 0x1 before I flashed 5.0 TW with odin..
And before that I had temasek unofficial cm12 (and before that many other roms)
Super-Veloce said:
I have flashed a custom recovery and after that superSU 2.42
I had 0x1 before I flashed 5.0 TW with odin..
And before that I had temasek unofficial cm12 (and before that many other roms)
Click to expand...
Click to collapse
Please answer this simple question:
In any moment did you installed Lollipop's bootloader?
Did you install the rom with .pit in Odin?
Segamalaga said:
Please answer this simple question:
In any moment did you installed Lollipop's bootloader?
Did you install the rom with .pit in Odin?
Click to expand...
Click to collapse
Yes I used PIT and Yes I updated the lollipop bootloader
This is how I flashed the 5.0 Touchwiz
And you don't have root and recovery, do you?
hi ! any news about (2) knox counter ????
It's a new sort of Knox counter included in new Lollipop's bootloader. Right now you can come back to KK's one and it dissapears.
OK thanks ! I will return to 4.4.2 to see !!! ) Latest 4.4.2 or any 4.4.2 with bootloader ???
amosolidu said:
OK thanks ! I will return to 4.4.2 to see !!! ) Latest 4.4.2 or any 4.4.2 with bootloader ???
Click to expand...
Click to collapse
reflashed 4.4.2 gn2 with bootloader and guess what???? nothing ....still knox warranty 0x1 (2)
You need to flash a 4 archives +pit rom. It worked for me
Segamalaga said:
You need to flash a 4 archives +pit rom. It worked for me
Click to expand...
Click to collapse
it worked now after i format everything from twrp (firmware,modem......) and flash single file firmware (FNG2 I USE ) !!! thanks anyway