Database Users

My P705 in emergency mode and Not being detected by the computer

I installed 10k rooted on my P705 and was about to install a custom recovery, when the phone came on it was in emergency mode but the computer could no longer detect it, I have tried all the usb ports on about 4 computers and changed the cable trice, So I'm a little bit sure it's nothing to do with the pc. I have tried putting it on holding volume + and -. Any help will be really appreciated because I am stuck right now.
I have gone through the forum for like 6 hours, I couldn't find anything , I apologize before hand if this was treated elsewhere.

Did you try flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher) while in emergency mode?

Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers

yes I did try to flash it but the computer doesn't detect it in the first place. So I get a " no phone found"

kevios12 said:
Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers
Click to expand...
Click to collapse
thank you but that didn't work either

Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the LG MOBILE SUPPORT TOOL.
I'm not familiar with it, but I read here that it's an alternative to Software update.

need4steer said:
Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the ...
I'm not familiar with it, but I read here that it's an alternative to Software update.
Click to expand...
Click to collapse
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....

I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL.

use another computer, maybe a problem with your OS (windows)

need4steer said:
I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL[/URL].
Click to expand...
Click to collapse
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................

d-hammer said:
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................
Click to expand...
Click to collapse
Okay, I got it.
Did you install the latest drivers?
If not, you can do so by downloading and installing them from your support site or by downloading and installing LG PC SUITE.
After that please open device manager and see if there's anything there with an exclamation or a question mark. If there is, please don't continue and post back what it is.
Only when you see that everything is okay, disconnect your phone, turn it off, enter into emergency mode (by clicking volume up + volume down + power button), make sure that you're in emergency mode (the yellow screen), connect your phone, run Software update [KDZ] (KDZ-Flasher), make sure to set the right type (CDMA / 3GQCT), make sure to leave the PhoneMode in DIAG, browse your kdz stock firmware file, and then click on "Lunch software update".
I'll be looking forward for your comment.
Please don't give up!

luthfi_11 said:
use another computer, maybe a problem with your OS (windows)
Click to expand...
Click to collapse
thanks but I actually tried it on linux, it didn't detect it either.

d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
i have no problem with windows 7 & windows 8, just try another computer bro

d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
Try what I suggested above.

Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
d-hammer said:
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....
Click to expand...
Click to collapse
u fixed your phone or not. plz help. I'm also stuck in same problem.

diwaker0 said:
Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
u fixed your phone or not. plz help. I'm also stuck in same problem.
Click to expand...
Click to collapse
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....

I think he did not check usb debugging so cant find phone
Not sure if it will work but no harm trying at this stage:
take out batteries,
wait for 30s,
put it back,
hold power and volume down
when keys light up, touch menu button (not the home button)
feel vibrate?

LOL!
pwhitpod3 said:
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....
Click to expand...
Click to collapse
K. A couple weeks later- for those of you with l45c:
You will get to the point where you find that LGNPST is the only thing that will flash. Having troubles registering the .dll? That cost me
over a week. Move the dll to your system/lg electronics/lgnpst folder and open the cmd window (terminal screen) as administrator.
Edit: Use the command> regsvr32 "name of dll".dll
You should google the regsvr command, as it is different for 64 bit machines, and there is a different system file to put the dll in..
Trouble is, we have no proper dll for the 45c. I tried the ms690 dll with an ms690 bin. Unfortunately, it flashed all the way through- and
now I have a perma-black screen... so don't try that.
I DO have an LGL45C-CT2 binary.... just no dll for the 45c, as usual. Not that it would matter- LGNPST cant see phone any more than
ADB could- there is no more 'emergency download'. I will check the battery, etc...
Morale of story- once again, there is evidence that the l45c is not supported. It is not an MS690, and probably not a P690... Use
LGNPST at your own risk, but quit pounding your head over other methods! Time wasted...
Until next time... keep hacking....

<del>

impossible unbrick l7

Hi all!i've a problem.
After flashing a firmware phone remains in LG logo.
So i need to use kdz flasher to update.
But with 4 different PC(windows 8,windows7,windows XP) i can't update.
I have put phone in emergency mode (i tried different way:with battery and volume+ and power,without battery volume+and power,without battery volume+ and back) but in each mode i have error in flashing(homero 10k kdz): or port-1,phone was not found,or upgrade error wparam...
Drivers are installed.i tried 3gqt and emergency or diag mode.
I have flashed others times kdz without problems.
I don't know what to do now.
Other approaches?with CMD commands?
Or there is a way with Kdz flasher?
Help please!
Thanks

Try this http://d-h.st/Okx kdz flasher, launch windows enabler as admin, also launch kdz as admin.

I have the same problem i will try this and we will see...
---------- Post added at 01:54 PM ---------- Previous post was at 12:58 PM ----------
well... the phone displays the charging animation... and that's all, if i want to boot the phone i have a bootloop

i got this

e-53e said:
i got this
Click to expand...
Click to collapse
I this (attachment)

your phone is not detected maybe it' a driver error

I ve installed drivers from LG site. But in emergency device dont connect to port.
How do you go in emergency(battery removed..etc etc)?
Any solution to force detecting e install drivers in emergency?
Now i m on windows 8 64bit

fenomeno83 said:
I ve installed drivers from LG site. But in emergency device dont connect to port.
How do you go in emergency(battery removed..etc etc)?
Any solution to force detecting e install drivers in emergency?
Now i m on windows 8 64bit
Click to expand...
Click to collapse
i installed the drivers that all the tutorials are telling to download and it works

e-53e said:
i installed the drivers that all the tutorials are telling to download and it works
Click to expand...
Click to collapse
Can you link?

fenomeno83 said:
Hi all!i've a problem.
After flashing a firmware phone remains in LG logo.
So i need to use kdz flasher to update.
But with 4 different PC(windows 8,windows7,windows XP) i can't update.
I have put phone in emergency mode (i tried different way:with battery and volume+ and power,without battery volume+and power,without battery volume+ and back) but in each mode i have error in flashing(homero 10k kdz): or port-1,phone was not found,or upgrade error wparam...
Drivers are installed.i tried 3gqt and emergency or diag mode.
I have flashed others times kdz without problems.
I don't know what to do now.
Other approaches?with CMD commands?
Or there is a way with Kdz flasher?
Help please!
Thanks
Click to expand...
Click to collapse
which firmware did you flash?
hi from italy

AXD96 said:
which firmware did you flash?
hi from italy
Click to expand...
Click to collapse
Homero 10k
Ciao!

i think that the B2CAppSetup.exe drivers works

fenomeno83 said:
Homero 10k
Ciao!
Click to expand...
Click to collapse
do you resolved?

AXD96 said:
do you resolved?
Click to expand...
Click to collapse
Tomorrow i'll try.
PS: i work in Milan

fenomeno83 said:
Tomorrow i'll try.
PS: i work in Milan
Click to expand...
Click to collapse
Hi, As much I have seen you are trying to flash your phone via KDZ, you can try to repair your drivers by going to devices and then update driver and it will find newest, and try to flash V20A by Homero because if you were on V20 syste (4.1.2) you can't simply flash V10k by Homero, hope I helped.

e-53e said:
i got this
Click to expand...
Click to collapse
I have the same problem
Model: LG Optimius L7 II P714

solved!
Emergency mode WITH BATTERY INSERTED (without battery, the drivers don't work) -->go in emergency in this manner: without cable inserted, press volumeUP and power, and when phone vibrate release keys
The problems of "error wparams 100..." was because 10k of homero.
I have flashed 10k original https://disk.yandex.com/public/?hash=7G/SaZRIBwInyyrUn9rmSP9o/+9CXAXmXHHf3EMuVFI=
and it works!
After i have installed cwm (just cwm) http://forum.xda-developers.com/showpost.php?p=38231332&postcount=2230
and i can install coocked roms now!!!
ps: i used this (UpTestEX-mod_hf-marwin-beta): http://forum.xda-developers.com/showpost.php?p=49358448&postcount=2 (flash in 3qgct, emergency)

[Q] LG Optimus L3 bricked.

Problem:
*Phone stuck in Lg and non stop white screen then restart(is it a bootloop?).
*Cant access recovery mode but can access emergency mode only.
*Phone doesn't recognize in computer when in emergency mode but you can hear a sound that your phone is connecting.
Solutions Tried:
*tried only kdz updater to flash to stock firmware but only gets a wpram 100 and Ipram 6 upgrade error.
*tried to restart or uninstall and install again but still get an error.
Phone
*LG Optimus L3 rooted.
*Cyanogenmod 9
*Sd merge
Hope to help me and gave any possible solutions

Download LG update tool. Choose emergency option. Tot will need to enter north imei and serial before the update starts

have you experienced this king of problem??
i will try this..i'll let you know as soon as possible.

SuperSkill said:
Download LG update tool. Choose emergency option. Tot will need to enter north imei and serial before the update starts
Click to expand...
Click to collapse
not working i tried to enter the imei for upgrade recovery but its not working..anything else

Check your pm

Do you have disabled "LG Virtual Modem" on device manager (windows)?

WHY
SuperSkill said:
Check your pm
Click to expand...
Click to collapse
why PM ?
thats the reason posts get repeated ..... no answer just private .....
---------- Post added at 05:45 PM ---------- Previous post was at 05:37 PM ----------
LGE400Addict said:
not working i tried to enter the imei for upgrade recovery but its not working..anything else
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=50657228&postcount=2

IGGYVIP said:
why PM ?
thats the reason posts get repeated ..... no answer just private .....
---------- Post added at 05:45 PM ---------- Previous post was at 05:37 PM ----------
http://forum.xda-developers.com/showpost.php?p=50657228&postcount=2
Click to expand...
Click to collapse
ive downloaded it but i cant click something on lg rdtt..

Notification area
LGE400Addict said:
ive downloaded it but i cant click something on lg rdtt..
Click to expand...
Click to collapse
windows enabler is included open it and then make sure its ON (in notification area click on it and it will say "on" on the icon) then you can click on anything there

soopochoux said:
Do you have disabled "LG Virtual Modem" on device manager (windows)?
Click to expand...
Click to collapse
i dont see lg virtual modem, I only see the "Lg androidnet usb modem"..

IGGYVIP said:
windows enabler is included open it and then make sure its ON (in notification area click on it and it will say "on" on the icon) then you can click on anything there
Click to expand...
Click to collapse
i enabled it and i still cant click on anything...

IGGYVIP said:
windows enabler is included open it and then make sure its ON (in notification area click on it and it will say "on" on the icon) then you can click on anything there
Click to expand...
Click to collapse
I can click now but i got another problem..it start updating.. but when im in 99% my phone restart and goes to lg log then turn white screen and restart at lg logo again.. until my upadate say error because my phone has disconnected..

LGE400Addict said:
i dont see lg virtual modem, I only see the "Lg androidnet usb modem"..
Click to expand...
Click to collapse
This "Lg androidnet usb modem" may cause many problems when flashing roms (with all LG phones that I repaired anyway ).
EDIT: Some problems like this "but when im in 99% my phone restart and goes to lg log then turn white screen and restart at lg logo again.. until my upadate say error because my phone has disconnected".

Try using windows xp. I had the same problem when I was using windows 7.

qwenny said:
Try using windows xp. I had the same problem when I was using windows 7.
Click to expand...
Click to collapse
win 7 no problem for me compability options win xp sp3 / run as admin
LGE400Addict said:
I can click now but i got another problem..it start updating.. but when im in 99% my phone restart and goes to lg log then turn white screen and restart at lg logo again.. until my upadate say error because my phone has disconnected..
Click to expand...
Click to collapse
did you remove sim and sd while flashing ?
what happens when you try to factory reset now ?

IGGYVIP said:
win 7 no problem for me compability options win xp sp3 / run as admin
did you remove sim and sd while flashing ?
what happens when you try to factory reset now ?
Click to expand...
Click to collapse
i've already remove it.
when i tried factory rest volume down + home +power button.. im stuck in LG LoGO..
im using windows 7.. is there a problem when using windows 7?

soopochoux said:
This "Lg androidnet usb modem" may cause many problems when flashing roms (with all LG phones that I repaired anyway ).
EDIT: Some problems like this "but when im in 99% my phone restart and goes to lg log then turn white screen and restart at lg logo again.. until my upadate say error because my phone has disconnected".
Click to expand...
Click to collapse
should i disabled this one?? but if i disabled it, the only left is the com port..

LGE400Addict said:
should i disabled this one?? but if i disabled it, the only left is the com port..
Click to expand...
Click to collapse
Try to disable it then retry to flash your phone. If doesn't works, you can enable it by the same way.

soopochoux said:
Try to disable it then retry to flash your phone. If doesn't works, you can enable it by the same way.
Click to expand...
Click to collapse
i've tried it in kdz updater.. and its not working too.. but im not yet using this in lg rdtt.. maybe i will try it and will give you response

You can also follow this guide (work for all lg phones) http://forum.xda-developers.com/showthread.php?t=2409308

STUCK at LG Logo, NO Download mode..Please HELP!!

hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!

TEDET123 said:
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
Click to expand...
Click to collapse
use flashtool with another *dll

His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.

bender_007 said:
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
Click to expand...
Click to collapse
thanks for replying guys..appreciate it!
yes..download mode is not functional.
When connect to pc at 'Factory hard reset mode' screen (vol- and pwr pressed, letgo and pressed)..nothing happens on either PC or Mobile..
After Hard reset, phone continue stuck at LG LOGO.. PC detected mobile as "LGE AndroidNet USB Serial Port (COM41)", see attached.
I have tried the method in the link above but the PC seems cannot detect phone during cmd "ls /dev/sd*" and "gdisk -l /dev/sdb" .

someone please help..

TEDET123 said:
someone please help..
Click to expand...
Click to collapse
Hey,
I'm currently having some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!

shark_max said:
Hey,
I'm currently have some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
Click to expand...
Click to collapse
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:

TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!

TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !

shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
the screenshot stays forever (trying to get into download mode) and did not enter the actual download screen.
if continue to boot, the phone will just hang at LG Logo.

shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
LG Support tool was unable to detect my phone..

patriky said:
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
Click to expand...
Click to collapse
I did this but phone just stays at the 2nd screenshot...
before it was bricked, I have no problem get it into download mode with vol+ and usb cable.

TEDET123 said:
LG Support tool was unable to detect my phone..
Click to expand...
Click to collapse
Wait so what can you do? Hard reset? Download mode? Nothing?
Can you plug your phone and check that your phone is not detected in device manager?
All the drivers are installed?

Same issue
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!

I would try to force the phone into qhsusb mode then flash only laf.img,aboot.img and boot.img
In qhsub mode you should be able to see the SDB partition
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
FaseehUllah said:
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
Click to expand...
Click to collapse

Same problem.

Same problem
now can i go back to fast boot mode?

someone please help..

Same problem, please helpp

Same Problem ...... flashing unknown rom and now stuck on LG logo and not entering to download mode please help !! Experts ??

[Q] LG G2 F320L got bricked, almost give up here [PLEASE HELP]

Okay, this is must be my first thread since I join this lovely forum.
So here is the deal, this is my previous phone that I gave to my sister not so long ago, she has this not-so-bright wise *ss who try to fix her G2.
Sadly, he flashed the wrong rom, this is LG F320L and I think he flashed with F320K (based on error message that I got from the LG Flash Tool when I try to fix it)
This is the story so far :
1. the first time i got it on my hand (after get wrong-flashed that is ) :
- the phone is cannot boot, it stucked on black screen with fastboot command, try to go to recovery but not working, keep going to fastboot screen
- but i can still go to download mode (if I press vol UP while connect it to my PC) but somehow my PC will not recognize it
2. So I browse so many tutorial here and I end up erase and then reflash the stock recovery via cmd fastboot command, I'm 100% sure that I flashed the correct stock recovery file
- the process kinda work, the phone is able to go to recovery screen now although still cannot boot to system
- i still can go to download mode but the PC still didn't recognize it
- however, now the phone is being recognize by my PC if i plug the phone (without pressing anything on the phone), but gave me error code on the MTP driver
3. So next step I try to flash it via kdz method, didn't work of course, since my download mode won't be recognize, and then i also try to flash it via TOT method, also fail (again)
Note : on TOT method I try to flash it while NOT on download mode, since it will not recognized, it gave me error message that i try to cross flash or something. It says that I try to flash F320K to F320L (hence I assume that my sister's boyfriend flashed the wrong rom and got bricked)
also please note that while i'm did this i already make sure that i change the port setting to port 41
So now i stucked here, without the working download mode that can be recognized by my PC i think i'm start to running out of option to fix this phone
Please point me to the right direction good people of xda, please, thank you in advance

ecko no yaro said:
Okay, this is must be my first thread since I join this lovely forum.
So here is the deal, this is my previous phone that I gave to my sister not so long ago, she has this not-so-bright wise *ss who try to fix her G2.
Sadly, he flashed the wrong rom, this is LG F320L and I think he flashed with F320K (based on error message that I got from the LG Flash Tool when I try to fix it)
This is the story so far :
1. the first time i got it on my hand (after get wrong-flashed that is ) :
- the phone is cannot boot, it stucked on black screen with fastboot command, try to go to recovery but not working, keep going to fastboot screen
- but i can still go to download mode (if I press vol UP while connect it to my PC) but somehow my PC will not recognize it
2. So I browse so many tutorial here and I end up erase and then reflash the stock recovery via cmd fastboot command, I'm 100% sure that I flashed the correct stock recovery file
- the process kinda work, the phone is able to go to recovery screen now although still cannot boot to system
- i still can go to download mode but the PC still didn't recognize it
- however, now the phone is being recognize by my PC if i plug the phone (without pressing anything on the phone), but gave me error code on the MTP driver
3. So next step I try to flash it via kdz method, didn't work of course, since my download mode won't be recognize, and then i also try to flash it via TOT method, also fail (again)
Note : on TOT method I try to flash it while NOT on download mode, since it will not recognized, it gave me error message that i try to cross flash or something. It says that I try to flash F320K to F320L (hence I assume that my sister's boyfriend flashed the wrong rom and got bricked)
also please note that while i'm did this i already make sure that i change the port setting to port 41
So now i stucked here, without the working download mode that can be recognized by my PC i think i'm start to running out of option to fix this phone
Please point me to the right direction good people of xda, please, thank you in advance
Click to expand...
Click to collapse
Okay, so at this moment does the device try to mount quite a lot of partitions? Also does it give any errors on the screen if you power on without trying to boot to download mode or recovery? Ideally we want to see something along the lines of security error.
Sent from my LG-D802 using Tapatalk

I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english

Mati0807 said:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
Click to expand...
Click to collapse
did you try to go from lollipop to kitkat?

heavy_metal_man said:
Okay, so at this moment does the device try to mount quite a lot of partitions? Also does it give any errors on the screen if you power on without trying to boot to download mode or recovery? Ideally we want to see something along the lines of security error.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
thanks for your reply, i really appreciate it
well, you're right, it does give me errors when i power on (without trying to go to download mode or recovery mode)
so when i power it on, it shows LG logo then the image goes like corrupt, at first it kinda like shaking then it went blur and last it disappearing, leave the screen into just blank screen.
but my PC recognize it on this moment, just the MTP driver that wasn't
about your first question i'm afraid i can't catch what that means

Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/

ecko no yaro said:
thanks for your reply, i really appreciate it
well, you're right, it does give me errors when i power on (without trying to go to download mode or recovery mode)
so when i power it on, it shows LG logo then the image goes like corrupt, at first it kinda like shaking then it went blur and last it disappearing, leave the screen into just blank screen.
but my PC recognize it on this moment, just the MTP driver that wasn't
about your first question i'm afraid i can't catch what that means
Click to expand...
Click to collapse
Hmmm. okay, so what does the pc recognize it as exactly in device manager? Also if you connect the device do you get several pop ups stating that the mounted device needs to be fixed? It's just that if the partitions are being mounted we can reflash them manually using DD commands with ubuntu.
---------- Post added at 06:20 PM ---------- Previous post was at 06:05 PM ----------
Mati0807 said:
Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/
Click to expand...
Click to collapse
Right, you need to follow this guide i think. Ensure your read it fully before you attempt anything. Now, the lollipop update apparently changed some partitions so I would flash the bumped twrp from the development section instead of the 2.6.3.2 version recommended. Then once you can boot into recovery flash the rom recommended in this post

heavy_metal_man said:
Hmmm. okay, so what does the pc recognize it as exactly in device manager? Also if you connect the device do you get several pop ups stating that the mounted device needs to be fixed? It's just that if the partitions are being mounted we can reflash them manually using DD commands with ubuntu.
Click to expand...
Click to collapse
it's just like the pict that i attached
about the pop ups, no.. i don't think i got those, the only pop ups that appear was the small notification on the bottom right panel that the drivers is being installed, and keep failing on the MTP driver, maybe that's why my PC can't recognizes it under the download mode

ecko no yaro said:
it's just like the pict that i attached
about the pop ups, no.. i don't think i got those, the only pop ups that appear was the small notification on the bottom right panel that the drivers is being installed, and keep failing on the MTP driver, maybe that's why my PC can't recognizes it under the download mode
Click to expand...
Click to collapse
if you open disk management what does it say about the g2? also did you install the universal adb driver at any point? http://forum.xda-developers.com/showpost.php?p=51265001&postcount=30 here it states that installing the universial driver will show your device as a samsung.
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
Mati0807 said:
Code:
I too have problem with my lg..
i flashed kdz file, but i have error. Now my lg >> dont have fastboot mode, download mode. but when i connect to the computer (USB) i have a lot of partitions.
what i must to do to bring my lg to life?
Sorry for my english
did you try to go from lollipop to kitkat?
yep :/ i dont have any idea what i must to do :/
Click to expand...
Click to collapse
Additional! this rom flash assumes you are on a d802 so if your not on a d802 the dont flash it!

heavy_metal_man said:
if you open disk management what does it say about the g2? also did you install the universal adb driver at any point? http://forum.xda-developers.com/showpost.php?p=51265001&postcount=30 here it states that installing the universial driver will show your device as a samsung.
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
Additional! this rom flash assumes you are on a d802 so if your not on a d802 the dont flash it!
Click to expand...
Click to collapse
okay, i just checked on disk management and it appear that my PC doesn't recognized the G2, what makes it weird, at the same time it recognizes the G2 on device manager on ports (COM & LPT) on port 41, about the adb yes, i do believe i did that long time ago, though i forgot what was my intention of doing so

ecko no yaro said:
okay, i just checked on disk management and it appear that my PC doesn't recognized the G2, what makes it weird, at the same time it recognizes the G2 on device manager on ports (COM & LPT) on port 41, about the adb yes, i do believe i did that long time ago, though i forgot what was my intention of doing so
Click to expand...
Click to collapse
Hmmm. im stumped. I think its a bit of a catch 22 here. What i think has happened is that the rom flash that was done has changed some of the partition layout, but the methods of fixing that issue is either with DD commands from a custom recovery (which you dont have and cannot flash) or with DD commands using ubuntu when the device is auto-mounting all of your partitions. Its worth a look if you have an ubuntu disk around, if not download here, burn to disk or mount it to a bootable usb and see if ubuntu has any luck with it. Either that or try installing any drivers you can on the pc to get download mode working.
there is also this as a last resort but i've never had to do this so i cannot vouch for it :-/ Good luck pal.

Yeah, i do these.
I used these tool >> https://doc-04-5c-docs.googleuserco...27034/0B_Hol5T47S-benVFYWIxcGlQU0k?e=download
and install bumped recovery 2.8.5.1, then next with otg cabble flash these http://forum.xda-developers.com/showpost.php?p=59079665&postcount=536.
and now i install cloudyg2 and i feel great xD thank you!

Mati0807 said:
Yeah, i do these.
I used these tool >> https://doc-04-5c-docs.googleuserco...27034/0B_Hol5T47S-benVFYWIxcGlQU0k?e=download
dear do you have above mentioned tool bcoz i can not download , this page do not open
Click to expand...
Click to collapse

new link http://www39.zippyshare.com/v/UphAeXOO/file.html
With all files for d802. i used these for my phone!
Only run these tool, and smile