Database Users

My P705 in emergency mode and Not being detected by the computer

I installed 10k rooted on my P705 and was about to install a custom recovery, when the phone came on it was in emergency mode but the computer could no longer detect it, I have tried all the usb ports on about 4 computers and changed the cable trice, So I'm a little bit sure it's nothing to do with the pc. I have tried putting it on holding volume + and -. Any help will be really appreciated because I am stuck right now.
I have gone through the forum for like 6 hours, I couldn't find anything , I apologize before hand if this was treated elsewhere.

Did you try flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher) while in emergency mode?

Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers

yes I did try to flash it but the computer doesn't detect it in the first place. So I get a " no phone found"

kevios12 said:
Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers
Click to expand...
Click to collapse
thank you but that didn't work either

Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the LG MOBILE SUPPORT TOOL.
I'm not familiar with it, but I read here that it's an alternative to Software update.

need4steer said:
Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the ...
I'm not familiar with it, but I read here that it's an alternative to Software update.
Click to expand...
Click to collapse
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....

I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL.

use another computer, maybe a problem with your OS (windows)

need4steer said:
I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL[/URL].
Click to expand...
Click to collapse
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................

d-hammer said:
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................
Click to expand...
Click to collapse
Okay, I got it.
Did you install the latest drivers?
If not, you can do so by downloading and installing them from your support site or by downloading and installing LG PC SUITE.
After that please open device manager and see if there's anything there with an exclamation or a question mark. If there is, please don't continue and post back what it is.
Only when you see that everything is okay, disconnect your phone, turn it off, enter into emergency mode (by clicking volume up + volume down + power button), make sure that you're in emergency mode (the yellow screen), connect your phone, run Software update [KDZ] (KDZ-Flasher), make sure to set the right type (CDMA / 3GQCT), make sure to leave the PhoneMode in DIAG, browse your kdz stock firmware file, and then click on "Lunch software update".
I'll be looking forward for your comment.
Please don't give up!

luthfi_11 said:
use another computer, maybe a problem with your OS (windows)
Click to expand...
Click to collapse
thanks but I actually tried it on linux, it didn't detect it either.

d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
i have no problem with windows 7 & windows 8, just try another computer bro

d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
Try what I suggested above.

Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
d-hammer said:
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....
Click to expand...
Click to collapse
u fixed your phone or not. plz help. I'm also stuck in same problem.

diwaker0 said:
Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
u fixed your phone or not. plz help. I'm also stuck in same problem.
Click to expand...
Click to collapse
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....

I think he did not check usb debugging so cant find phone
Not sure if it will work but no harm trying at this stage:
take out batteries,
wait for 30s,
put it back,
hold power and volume down
when keys light up, touch menu button (not the home button)
feel vibrate?

LOL!
pwhitpod3 said:
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....
Click to expand...
Click to collapse
K. A couple weeks later- for those of you with l45c:
You will get to the point where you find that LGNPST is the only thing that will flash. Having troubles registering the .dll? That cost me
over a week. Move the dll to your system/lg electronics/lgnpst folder and open the cmd window (terminal screen) as administrator.
Edit: Use the command> regsvr32 "name of dll".dll
You should google the regsvr command, as it is different for 64 bit machines, and there is a different system file to put the dll in..
Trouble is, we have no proper dll for the 45c. I tried the ms690 dll with an ms690 bin. Unfortunately, it flashed all the way through- and
now I have a perma-black screen... so don't try that.
I DO have an LGL45C-CT2 binary.... just no dll for the 45c, as usual. Not that it would matter- LGNPST cant see phone any more than
ADB could- there is no more 'emergency download'. I will check the battery, etc...
Morale of story- once again, there is evidence that the l45c is not supported. It is not an MS690, and probably not a P690... Use
LGNPST at your own risk, but quit pounding your head over other methods! Time wasted...
Until next time... keep hacking....

<del>

[Q] Hard Brick D800 - Please Help! At a loss

Any help is appreciated! First some background:
Flashed device to stock using KK 4.4 version d80020c following steps found here http://forum.xda-developers.com/showthread.php?t=2432476. Successfully rooted using directions (and ioroot25) found here https://www.youtube.com/watch?v=HKuedInhdjU&noredirect=1.
Here's where I got into trouble...Downloaded TWRP 2.7 recovery img and flashed via Flashify. Since this step, my D800 has the exact same symptoms found on this thread http://forum.xda-developers.com/showthread.php?t=2582142.
- No download mode (tried many times)
- No recovery (tried many times also)
- Secure booting error
- LG detected as qhsusb_bulk in device manager
- Device is recognized as 15 different drives, one of which contains a folder named image with 79 different files being .B0X files and Microsoft Access Add-in Data files
- Upon restarting, LG logo with secure booting error, then the screen goes black while your phone is still on
I've followed the steps in the thread that matches my G2's symptoms, run ubuntu 13.1 in VM, apply usb filters for my device which is then recognized as either LG Electonics Inc. QHUSB_BULK or Unknown Device 05C6:9006 when running in VM.
Upon running command ls /dev/sd* in VM Ubuntu Terminal, all that is returned is /dev/sda /dev/sda1 /dev/sda2 /dev/sda5 which are the partitions for Ubuntu, no LG.
I've tried to download and update the Qualcomm drivers, device manager tells me that the drivers were recognized, but cannot be installed and do not pass the hash check (Note: PC is running Windows 8.1).
I've spent over 12 hours on this trying to fix this problem, researched and searched everywhere. If I could get ubuntu to recognize the device, I would be able to continue on with the instructions on this thread http://forum.xda-developers.com/showthread.php?t=2582142.
Links for windows 8 qualcomm drivers, suggestions on how to get the device recognized in ubuntu vm, experiences from others in similar situation, or any with experience working with LG to get a repair done if I'm SOL (as in eMMC is fried) would be so helpful right now.
Thank you all!

After flashing recovery did you flash a patched kernel to boot stock kk?
Sent from my LG-D800 using Tapatalk

I had the same, also with a lot of drives etc.
Screen is black but low backlighted?
Then try with pluged USB Cabel in Phone, hold Power button until screen is realy off, then hold the Power Up Button and plug Cabel into PC.
So I got download mode after I tryed many times

I had problems a few weeks ago getting mine to go into Download mode... turned out that the cable I was using was great for charging, but sucked for everything else. Once I switched to a different cable things worked fine and I was able to load D80010c on the device.
I was running D80020c this morning (with the D80010c boot.img to have a custom recovery) and decided to do an update. Since you can't load D80020k if you have the older bootloader I went all the way back to D80010c, updated to D80010o, D80010q, D80020c and finally D80020k. I was able to root that using IOroot and have restored everything back onto my phone.
-Daryel

Thanks so much for the responses! I've tried endlessly to get the device into download mode, and tried a new cable to no avail. Any other suggestions?

The URL you've linked to will help you solve your problem.
So once you power off your device, hold volume down and power till the lg logo shows, then release shortly and hold them again together till the white window with "factory reset appears", you should notice a text behind the white screen it's fine. So right now when you think it's gonna enter recovery mode the screen is gray(not black), now you connect your device to your ubuntu or whichever linux. You will notice the screen repeatelly blinking when linux is trying to automount the partitions. Figure out which device it is according to the messages it throws. (sdc, sdb, sdX)
This way you should proceed according to the instructions on the thread you linked.
d800 partitions are here

Still no luck
bender_007 said:
The URL you've linked to will help you solve your problem.
So once you power off your device, hold volume down and power till the lg logo shows, then release shortly and hold them again together till the white window with "factory reset appears", you should notice a text behind the white screen it's fine. So right now when you think it's gonna enter recovery mode the screen is gray(not black), now you connect your device to your ubuntu or whichever linux. You will notice the screen repeatelly blinking when linux is trying to automount the partitions. Figure out which device it is according to the messages it throws. (sdc, sdb, sdX)
This way you should proceed according to the instructions on the thread you linked.
Click to expand...
Click to collapse
Thanks for your advice.
I got the white screen asking whether or not I want to perform a factory reset. If I choose No, the phone sends me right to the LG Logo with the error screen. If I choose Yes, it does the same thing. If I plug my phone into my computer while on the white screen asking if I want to perform a factory reset, the device isn't recognized and the PC doesn't see it as plugged in or mounted. I'm not sure what you mean by the timing of when I should try to plug in my device. Thanks again for all your help.

Sneaky Elephant said:
Thanks for your advice.
I got the white screen asking whether or not I want to perform a factory reset. If I choose No, the phone sends me right to the LG Logo with the error screen. If I choose Yes, it does the same thing. If I plug my phone into my computer while on the white screen asking if I want to perform a factory reset, the device isn't recognized and the PC doesn't see it as plugged in or mounted. I'm not sure what you mean by the timing of when I should try to plug in my device. Thanks again for all your help.
Click to expand...
Click to collapse
As soon as in the background of the white menu (factory reset) the secure boot appear plug it in. I'm not sure how much usb filter helps you(maybe it does) but try installing ubuntu over WUBI installer so your win remains. Or at least try ubuntu from usb stick. So you can know for sure if it's working.

Hi Sneaky E. I have the same issue you have. I'll be following your thread. If I figure anything out I'll let you know. I am also having an issue getting mine to charge now. Have you tried downgrading your TWRP?

VirtualBox Error
VirtualBox recognizes the device is plugged in, but won't allow me to push the device for use in linux. I keep getting this error message:
Failed to attach the USB device LG Electronics Inc. QHSUSB__BULK to the virtual machine Ubuntu.
USB device 'LG Electronics Inc. QHSUSB__BULK' with UUID {d8db3712-b86c-4257-a87b-275cef04e5a3} is busy with a previous request. Please try again later.
Result Code: E_INVALIDARG (0x80070057)
Component: HostUSBDevice
Interface: IHostUSBDevice {173b4b44-d268-4334-a00d-b6521c9a740a}
Callee: IConsole {8ab7c520-2442-4b66-8d74-4ff1e195d2b6}
Click to expand...
Click to collapse
I've tried all USB ports, 2.0 and 3.0. I feel like if I can get past this there should be no reason linux can't see the partitions in the phone. Please Help!!!

Ok so thank you for your help so far. I was able to install Linux on a USB drive and ran the commands and pushed appropriate files from there. I pushed all files including recover.img but the phone will not boot into recovery. Please help!
Thank you!

Sneaky Elephant said:
Ok so thank you for your help so far. I was able to install Linux on a USB drive and ran the commands and pushed appropriate files from there. I pushed all files including recover.img but the phone will not boot into recovery. Please help!
Thank you!
Click to expand...
Click to collapse
you are not alone dude. i had the same issue since sunday and i have spent almost 46 hours already trying to restore my LG G2 F320S korean model.
i followed that instruction in linux, everything went well but then I ended up with a phone not going past the LG logo. the screen no longer dims like how it used to with the secure boot fail error. again, it stucked at the LG logo and thats it.
pressing the 3 buttons though for 5 seconds shows a white screen with 3 options and a bar code under.
but all of these options will just take me back to the LG logo.
I went to a phone technician today, and they said the doing a JTAG fix is the only way to resolve the problem because after trying to fix it with linux, it is no longer identified by my PC.
what are your solutions so far?
anyways before this issue came up, i tried to flash TWRP using flashify, it failed. then went back up. tried to update the OS via OTA then thats it.
i home someone could help us out.

ambetdelarosa said:
you are not alone dude. i had the same issue since sunday and i have spent almost 46 hours already trying to restore my LG G2 F320S korean model.
i followed that instruction in linux, everything went well but then I ended up with a phone not going past the LG logo. the screen no longer dims like how it used to with the secure boot fail error. again, it stucked at the LG logo and thats it.
pressing the 3 buttons though for 5 seconds shows a white screen with 3 options and a bar code under.
but all of these options will just take me back to the LG logo.
I went to a phone technician today, and they said the doing a JTAG fix is the only way to resolve the problem because after trying to fix it with linux, it is no longer identified by my PC.
what are your solutions so far?
anyways before this issue came up, i tried to flash TWRP using flashify, it failed. then went back up. tried to update the OS via OTA then thats it.
i home someone could help us out.
Click to expand...
Click to collapse
What are the negatives to doing a JTAG fix?

Sneaky Elephant said:
What are the negatives to doing a JTAG fix?
Click to expand...
Click to collapse
Here is your fix.
follow exactly. LINK

ingoljosh said:
Here is your fix.
follow exactly. LINK
Click to expand...
Click to collapse
Followed steps already, still can't boot into recovery.

Sneaky Elephant said:
Followed steps already, still can't boot into recovery.
Click to expand...
Click to collapse
if your device is insured maybe report it lost and pay deductible and get a new one AND NEVER ROOT AGAIN

linux cant recognizy my lg g2 f320L
Sneaky Elephant said:
Ok so thank you for your help so far. I was able to install Linux on a USB drive and ran the commands and pushed appropriate files from there. I pushed all files including recover.img but the phone will not boot into recovery. Please help!
Thank you!
Click to expand...
Click to collapse
HI Sneaky elephant........bro I am having the same problem with my lg g2(hard bricked) that its not recognised by Ubuntu...it just shows hssusb-hulk.....no partitions to mount.............
in ur next reply u said that issue solve.....
kindly tell me too that how ur issue resolved...........thanks......

dr jam said:
HI Sneaky elephant........bro I am having the same problem with my lg g2(hard bricked) that its not recognised by Ubuntu...it just shows hssusb-hulk.....no partitions to mount.............
in ur next reply u said that issue solve.....
kindly tell me too that how ur issue resolved...........thanks......
Click to expand...
Click to collapse
The same with me - UP

install ur Ubuntu sing VMware....then partitions will appear.........
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
install ur Ubuntu using VMware......then ur mobile will be recognised and partitions will appear.....

hard bricked? vs980 NEED HELP PLEASE

hello all, im a noob and think my phone is good enough to throw in the garbage. you tell me!!
so i use my vs980 on tmobiles network and only get at best hspa so i tried to throw a tmobile stock rom on my vs980 to try and get 4g ive seen people doing it i was hesitant but did it anyway. i had a zip for a verizon kernel now the rom installed successfully but the kernel didnt i meant to try to restore a backup but accidentally hit reboot and now every time i power on my phone i get black screen
fastboot mode started
reset
portchange
reset
portchange
fastboot processing commands
cant get into twrp with two button combo cant do a factory reset, infact that has changed looks a bit different than it used to, assuming its a tmobile factory reset screen
i tried to do the kdz and tot method to return to stock aswell phones not recognized for either method
i installed ubuntu on virtual box to try and push recovery.img, laf.img, aboot.img. boot.img. etc but phones not recognized in terminals fastboot says <waiting for device> any way to get ubuntu to recognize my device? any special drivers i need?
ive searched high and low for a solution im so exausted and could really use some veterans help please help this noob out... thanks in advance for any help from you guys!!

anyone?

pete022682 said:
hello all, im a noob and think my phone is good enough to throw in the garbage. you tell me!!
so i use my vs980 on tmobiles network and only get at best hspa so i tried to throw a tmobile stock rom on my vs980 to try and get 4g ive seen people doing it i was hesitant but did it anyway. i had a zip for a verizon kernel now the rom installed successfully but the kernel didnt i meant to try to restore a backup but accidentally hit reboot and now every time i power on my phone i get black screen
fastboot mode started
reset
portchange
reset
portchange
fastboot processing commands
cant get into twrp with two button combo cant do a factory reset, infact that has changed looks a bit different than it used to, assuming its a tmobile factory reset screen
i tried to do the kdz and tot method to return to stock aswell phones not recognized for either method
i installed ubuntu on virtual box to try and push recovery.img, laf.img, aboot.img. boot.img. etc but phones not recognized in terminals fastboot says <waiting for device> any way to get ubuntu to recognize my device? any special drivers i need?
ive searched high and low for a solution im so exausted and could really use some veterans help please help this noob out... thanks in advance for any help from you guys!!
Click to expand...
Click to collapse
thats not even close to a hard brick it is in bootloader mode do not let it die keep it plugged in because if the battery dies then you have a real big problem im not sure what to do after this but i know you dont want the battery to die

well that's reassuring
Keeping phone plugged in. Now if I can get some tips as to why I cant get it to communicate with ubuntu in this bootloader mode to push the files I need. Any help anyone? Please. Where I go from here?

link - windows

Tried putting laf.IMG in your script folder bender it brought cmd to<waiting for device> my comp won't communicate with my phone for some reason. Am I missing any special drivers?

pete022682 said:
Tried putting laf.IMG in your script folder bender it brought cmd to<waiting for device> my comp won't communicate with my phone for some reason. Am I missing any special drivers?
Click to expand...
Click to collapse
Just install lg drivers - if it doesn't work then download adb drivers..
+please see the device manager for new devices and "not installed drivers"
+ look here

I will try when I get home thanks for your help so far at work no computer access. Thanks again bender I will let you know how everything goes.
bender_007 said:
Just install lg drivers - if it doesn't work then download adb drivers..
+please see the device manager for new devices and "not installed drivers"
+ look here
Click to expand...
Click to collapse

if you manage to install the driver the rest should go easy.
It's weird, on some systems it wont install the driver properly(adb) but google nexus driver installs fine.

i was hoping so
bender_007 said:
if you manage to install the driver the rest should go easy.
It's weird, on some systems it wont install the driver properly(adb) but google nexus driver installs fine.
Click to expand...
Click to collapse
so this is where were at bender....
got drivers installed, phone is being recognized...
pushed laf.img with your script...GOT DOWNLOAD MODE BACK!!yes, progress...
went to factory restore with .TOT method.....FAILED
shows PID#, IMEI#, MODEL,D801 DLL VS980 SBUV Xdabbeb's vs98024a 1.1.1 11 SWOV Xdabbeb's vs98024a 1.1.1 11 device doesn't match
ideally i would love to just turn this vs980 into a d801 stock kitkat by pushing all nessassary d801 files would that work what would be my options here?

How do i fastboot flash open recovery twrp IMG?

Ultra brick G2 vs980! T_T
Good night lords of XDA!
I come to you after exhausting all that I could find and try, hope you can enlighten me, you would save a new G2 that is about to become a gleaming brick:
Summary: I have in hand a Verizon LG G2 vs980, with the intention of using it in Spain. After a bad flash a ROM for a different model, you could not access recovery mode or download mode, only fastboot.
Thanks to this great tutorial, I could flash by ADB and fastboot files an official ROM for this G2, but after a correct process, the G2 restarted and only shows "Security error" before shutting ...
I still do not have access to recovery or download, and now not to fastboot. Only allows me to access the screen "Factory reset", but in doing nothing changes.
How could re-flash a recovery or something like that allows me relive my G2?
Thank you very much in advance. You are my salvation. XD
PS: I apologize for any clerical error or misused term. I do not usually write in English.
Click to expand...
Click to collapse
Sorry, wrong thread. XDD

LG G2 - D802 - Bricked... need urgent help...

Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.

qam47 said:
Hi,
I was installing MIUI v6, it did got install but many things were not working.
So i did the stupid thing and changed the kernal through twrp.
And NOW:
My phone is bricked, it stays on the LG logo.
I tried to go into downloading mode but it does not detect the usb to computer connection.
So I am unable to to use LG tool to install stock rom kdz.
because it does not detects the usb in downloading mode....
please help me around this problem.
my warrenty is over too.
Click to expand...
Click to collapse
I got the same problem here after using MIUI and trying to get out of it.
Stuck in bootloop, no recovery, download mode stuck at first screen, phone not being detected by pc and no flashing led anymore.
Anyone help us please, my phone is out of warranty too

http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.

Rayaxe said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
everything you need is here.
check again if you don't have USB connection of any kind. If you do have something in the PC responding to the G2 being connected, it isn't a hard brick and you can fix it with this: http://forum.xda-developers.com/showthread.php?t=2582142
Otherwise you just have to do this short the caps thing. Be careful and renember that this is always a better option than staying with a bricked device. You can also try to give the phone to some experienced repaired and tell him about the method and how will it cost.
Click to expand...
Click to collapse
Thanks for the reply.
But it says:
http://forum.xda-developers.com/showthread.php?t=2582142
VERY IMPORTANT!!!!!!!
You must use the img files that correspond to the ROM you have installed before getting the problem to avoid breaking your phone. The link above is for 10b_EUR_16G firmware version. So don't use those files if your firmware version was not that one. Instead you should look for img files corresponding to the current version installed in your phone. If you don't know what version you've installed then don't use this method because you will break your phone.
Click to expand...
Click to collapse
and i dont know which one to download.
Here is the link to Miui 6, I did install before crashing
http://forum.xda-developers.com/lg-g2/development/kk-miui-6-lg-g2-variants-based-stock-lg-t3106569.
...

You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message

Rayaxe said:
You have to know which model your phone is.
Do you know your phone's IMEI? http://www.lgkdz.com/ Go here and it will get the file you need to download via your IMEI (even though it is risky to put the IMEI in the internet).
Otherwise you can just search for your kdz file by knowing what model you have and what stock rom you had last time. You can always revert to that.
Mine is D802 32GB, has V30b-EUR software. That is enough for me to get the correct kdz file even by searching in the links provided in the tutorials I mentioned in my last message
Click to expand...
Click to collapse
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?

GoPogoOreo! said:
My phone is bootlooping and recognized as "LGE Android MTP Device" only,
I can't back to stock using kdz, can't ADB sideload
Any ideas how to solve it?
Click to expand...
Click to collapse
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.

Rayaxe said:
Do you have access to download mode? Since your PC recognizes the phone as MTP Device, I'm not sure but I think that's only possible if you have /system/ working since the other partitions don't have MTP support originally.
If you have that, go there: http://forum.xda-developers.com/showthread.php?t=2432476
Flash with the tot method and you should be good to go.
But wait for someone who can confirm what I'm saying since I'm no expert.
Click to expand...
Click to collapse
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device

GoPogoOreo! said:
I can access download mode, but when i connect my phone (on download mode) to my PC nothing happened, and my phone is not detected even as MTP device
Click to expand...
Click to collapse
samething with me please help

help! my g2 only boots into fastboot

I was trying to install a custom recovery (twrp) by several different methods, with absolutely no luck (but that's another secondary issue at this point) and i screwed something up. Not exactly sure but i think the last thing I did was:
using "Rashr - Flash Tool" i think i went to "flash kernel from storage" then flashed boot.img.
now the phone goes immediately, directly into fastboot even without being connected to computer.
so i tried getting into the stock recovery by holding "volume down" and "power" until lg logo, releasing the reholding until factory reset screen. after choosing yes 2 times i get a
"boot certicification verify" or something message for about a second then it goes to this screen (sorry but apparently i haven't had enough posts on the forums to include clickable links.)
h**ps://drive.google.com/file/d/0BwQdFsCQ9KZVaGM1eWdJb25WVVU/view?usp=sharing

slplsnphx said:
I was trying to install a custom recovery (twrp) by several different methods, with absolutely no luck (but that's another secondary issue at this point) and i screwed something up. Not exactly sure but i think the last thing I did was:
using "Rashr - Flash Tool" i think i went to "flash kernel from storage" then flashed boot.img.
now the phone goes immediately, directly into fastboot even without being connected to computer.
so i tried getting into the stock recovery by holding "volume down" and "power" until lg logo, releasing the reholding until factory reset screen. after choosing yes 2 times i get a
"boot certicification verify" or something message for about a second then it goes to this screen (sorry but apparently i haven't had enough posts on the forums to include clickable links.)
h**ps://drive.google.com/file/d/0BwQdFsCQ9KZVaGM1eWdJb25WVVU/view?usp=sharing
Click to expand...
Click to collapse
if u still have acces to fastboot use this or u see many disk at windows use srktool http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076

amin44 said:
if u still have acces to fastboot use this or u see many disk at windows use srktool http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
Click to expand...
Click to collapse
ok, i do have access to fastboot (actually, as soon as i power it on, it immediately is in foastboot mode, even without being connected to computer). i tried using srktool's repair tools via fastboot. it seems like it's working (ie phone shows that it receives command) but that's it. does it take a loooooong time or something?
btw, i can also get into download mode by holding "vol up" while plugging into computer. so, i tried using srktool utilites via download mode and nothing.
also, i just noticed that while connected to computer in download mode, in device manager it shows G2 under "portable devices" with an exclamation point on it.

slplsnphx said:
ok, i do have access to fastboot (actually, as soon as i power it on, it immediately is in foastboot mode, even without being connected to computer). i tried using srktool's repair tools via fastboot. it seems like it's working (ie phone shows that it receives command) but that's it. does it take a loooooong time or something?
btw, i can also get into download mode by holding "vol up" while plugging into computer. so, i tried using srktool utilites via download mode and nothing.
also, i just noticed that while connected to computer in download mode, in device manager it shows G2 under "portable devices" with an exclamation point on it.
Click to expand...
Click to collapse
are u sure u do not have franken phone open battery cover and see model written inside motherbord

amin44 said:
are u sure u do not have franken phone open battery cover and see model written inside motherbord
Click to expand...
Click to collapse
I haven't taken the back off (yet) but all indications are that it's an AT&T (D800).
What part of my description makes you think that it might be a franken phone?

Did you try connecting the phone in download mode or fastboot to the LG Mobile Support Tool and performing an upgrade recovery?

audit13 said:
Did you try connecting the phone in download mode or fastboot to the LG Mobile Support Tool and performing an upgrade recovery?
Click to expand...
Click to collapse
not sure what you mean by "lg mobile support tool". i googled it and found and installed "lg pc suite". is that the same thing?
nevermind that last question. i found and installed and tried the upgrade recovery tool but for some reason the phone wont go into download mode anymore. when i power it up whith ""vol +" help down, it shows download mode for a second, but then goes right into fastboot mode.

Is it recognized by the program in fastboot mode?
Here's the program I was referring to: http://www.lg.com/ca_en/support-mobile/lg-LGD803
Even though the program says it is for the 803, I used it to recover my international d802.

slplsnphx said:
not sure what you mean by "lg mobile support tool". i googled it and found and installed "lg pc suite". is that the same thing?
nevermind that last question. i found and installed and tried the upgrade recovery tool but for some reason the phone wont go into download mode anymore. when i power it up whith ""vol +" help down, it shows download mode for a second, but then goes right into fastboot mode.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404

amin44 said:
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
Thanks for the reply! But when I have phone connected to USB in fastboot, it shows up in device manager as "android device > USB modem phone port". Is that method the right fix for my situation?

ok, so likei said my phone is indeed in fastboot mode, connected to computer via usb (shows up in device manager as "android device > USB modem phone port". using srktool, i can send commands to the phone (command shows up on phone but thats it.....doesnt matter what command, it just sticks there until i unplug the phone then srktool shows the operation competed and phone shows
https://drive.google.com/file/d/0BwQdFsCQ9KZVSVg3OTZLcXV0N0E/view?usp=sharing
but none of operations actually complete on the phone.

slplsnphx said:
Thanks for the reply! But when I have phone connected to USB in fastboot, it shows up in device manager as "android device > USB modem phone port". Is that method the right fix for my situation?
Click to expand...
Click to collapse
that method fix for all situation

amin44 said:
that method fix for all situation
Click to expand...
Click to collapse
ok i shorted the capacitors, and eventually have gotten to where i can get into twrp. i assume that is serious progress, but what do i need to do next?

slplsnphx said:
ok i shorted the capacitors, and eventually have gotten to where i can get into twrp. i assume that is serious progress, but what do i need to do next?
Click to expand...
Click to collapse
flash stock ROM via download mode or flash custom ROM via twrp.
the first choice (stock ROM) is better

thanks for the responses!!
before i saw your reply, i flashed the stock .tot firmware and now i have my phone back.
but, before all this started, it was lollipop(5.0.2) and now it's Jellybean(4.2.2). i bought phone on ebay, so im assuming that it got lollipop via an ota update. so now i'm looking into flashing it back to lollipop. what's the easiest method to install stock lollipop?