Database Users

My P705 in emergency mode and Not being detected by the computer

I installed 10k rooted on my P705 and was about to install a custom recovery, when the phone came on it was in emergency mode but the computer could no longer detect it, I have tried all the usb ports on about 4 computers and changed the cable trice, So I'm a little bit sure it's nothing to do with the pc. I have tried putting it on holding volume + and -. Any help will be really appreciated because I am stuck right now.
I have gone through the forum for like 6 hours, I couldn't find anything , I apologize before hand if this was treated elsewhere.

Did you try flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher) while in emergency mode?

Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers

yes I did try to flash it but the computer doesn't detect it in the first place. So I get a " no phone found"

kevios12 said:
Remove the Drivers and plug the phone in our PC.. maybe reinstall the Drivers
Click to expand...
Click to collapse
thank you but that didn't work either

Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the LG MOBILE SUPPORT TOOL.
I'm not familiar with it, but I read here that it's an alternative to Software update.

need4steer said:
Just to be clear, you're trying to flash your stock firmware with Software update [KDZ] (KDZ-Flasher), while in emergency mode (your phone in is that yellow emergency mode)?
If so, then maybe try the ...
I'm not familiar with it, but I read here that it's an alternative to Software update.
Click to expand...
Click to collapse
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....

I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL.

use another computer, maybe a problem with your OS (windows)

need4steer said:
I'm confused - what do you mean by "DOES NOT READ"?
Your wrote that you are getting "no phone found" in Software update [KDZ].
So I asked if this is happening when you are in the emergency mode (your phone screen is kind of yellow and there is "emergency mode" in it).
I also wrote that if you were in emergency mode, then try LG MOBILE SUPPORT TOOL[/URL].
Click to expand...
Click to collapse
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................

d-hammer said:
Heres the problem, its not detecting, If you can tell me some way to make the laptop detect the phone in emergency mode, I will be extremely grateful, ps kdz equally says no phone found cuz.... the laptop cannot detect the phone and LG MOBILE SUPPORT TOOL equally cannot find the phone connected to the laptop. So..........................................
Click to expand...
Click to collapse
Okay, I got it.
Did you install the latest drivers?
If not, you can do so by downloading and installing them from your support site or by downloading and installing LG PC SUITE.
After that please open device manager and see if there's anything there with an exclamation or a question mark. If there is, please don't continue and post back what it is.
Only when you see that everything is okay, disconnect your phone, turn it off, enter into emergency mode (by clicking volume up + volume down + power button), make sure that you're in emergency mode (the yellow screen), connect your phone, run Software update [KDZ] (KDZ-Flasher), make sure to set the right type (CDMA / 3GQCT), make sure to leave the PhoneMode in DIAG, browse your kdz stock firmware file, and then click on "Lunch software update".
I'll be looking forward for your comment.
Please don't give up!

luthfi_11 said:
use another computer, maybe a problem with your OS (windows)
Click to expand...
Click to collapse
thanks but I actually tried it on linux, it didn't detect it either.

d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
i have no problem with windows 7 & windows 8, just try another computer bro

d-hammer said:
thanks but I actually tried it on linux, it didn't detect it either.
Click to expand...
Click to collapse
Try what I suggested above.

Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
d-hammer said:
Thanks but Thats not exactly the problem, It DOES NOT READ to begin with. If the laptop could detect the phone, then I would be able to flash "anything". My problem is the laptop cannot detect the phone....
Click to expand...
Click to collapse
u fixed your phone or not. plz help. I'm also stuck in same problem.

diwaker0 said:
Yesterday i was upgrading my LG P705 to 4.1.2 usind KDZ V20B, but it failed & its now stuck in emergency mode. The main problem is my PC is not recognizing it. I uninstalled LG drivers & installed again, but then also, its not recognised my my PC. Please Help.
---------- Post added at 06:00 PM ---------- Previous post was at 05:54 PM ----------
u fixed your phone or not. plz help. I'm also stuck in same problem.
Click to expand...
Click to collapse
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....

I think he did not check usb debugging so cant find phone
Not sure if it will work but no harm trying at this stage:
take out batteries,
wait for 30s,
put it back,
hold power and volume down
when keys light up, touch menu button (not the home button)
feel vibrate?

LOL!
pwhitpod3 said:
Same problem here. I downloaded a program called Optimus Toolkit, as I have an Optimus LGl45c, and the program is for
Linux. Same problem- CAN'T SEE PHONE. Program must use ADB, which CAN'T SEE PHONE while it's in emergency mode, as
apparently the correct partition isn't mounted!! Windows KDZ updater sees phone (try the solution from another blog- run in
different compatibility mode: right click on program>properties>compatibility. this worked for me) but the KDZ Updater can't
find the LGMobileDL.dll... lol! wait til you try it!...) So, for he/she who suggested LG PC Suite, please listen. Suite CAN'T SEE
PHONE either, and refuses to run any further....
Anybody have any tricky ways to flash a boot? It would have to be a Linux hack method.....
Click to expand...
Click to collapse
K. A couple weeks later- for those of you with l45c:
You will get to the point where you find that LGNPST is the only thing that will flash. Having troubles registering the .dll? That cost me
over a week. Move the dll to your system/lg electronics/lgnpst folder and open the cmd window (terminal screen) as administrator.
Edit: Use the command> regsvr32 "name of dll".dll
You should google the regsvr command, as it is different for 64 bit machines, and there is a different system file to put the dll in..
Trouble is, we have no proper dll for the 45c. I tried the ms690 dll with an ms690 bin. Unfortunately, it flashed all the way through- and
now I have a perma-black screen... so don't try that.
I DO have an LGL45C-CT2 binary.... just no dll for the 45c, as usual. Not that it would matter- LGNPST cant see phone any more than
ADB could- there is no more 'emergency download'. I will check the battery, etc...
Morale of story- once again, there is evidence that the l45c is not supported. It is not an MS690, and probably not a P690... Use
LGNPST at your own risk, but quit pounding your head over other methods! Time wasted...
Until next time... keep hacking....

<del>

Help i totally bricked my lg g2 :(

Phone fixed, please delete the thread.

3S0PHAGOOS said:
I changed my ROM from stock to 4.4.2 ROM but I got so many issues so changed back to stock ROM, but my LG G2 only has now only 10gb of internal memory.. [I got 32gb lg g2] Now, i tried the instruction from the guy here
http://forum.xda-developers.com/showthread.php?t=2470207&page=3
and also this
http://forum.cyanogenmod.com/topic/...s-on-internal-storage/page__st__20#entry67870
I tried to do the steps as instructed but the result is not the same as mine and then i just exit ADB... then i restart my phone and booomm...
my phone died can't on at all even on download mode... when i try download mode it's just USB Not recognize... please help me ((((
Click to expand...
Click to collapse
Try connecting the phone to a wall charger for 15 mins,and then power up the phone.

nimrodsv said:
Try connecting the phone to a wall charger for 15 mins,and then power up the phone.
Click to expand...
Click to collapse
didn't work, as expected

3S0PHAGOOS said:
didn't work, as expected
Click to expand...
Click to collapse
At the second thread its for HTC incredible, i hope you didnt flashed anything from there right?
Honestly i have no idea what you can do, but trying to eliminate some of the cases..
EDIT: you should try the first method ( http://forum.xda-developers.com/showthread.php?t=2470207&page=3 ) when using this files: https://www.dropbox.com/sh/3pqceuaqsji0dqn/nvR20mLqMF
if that what you did and it didn't worked im guessing that flashing the firmware wont help, but there are wiser people than me to help you, just wait for their input

nimrodsv said:
At the second thread its for HTC incredible, i hope you didnt flashed anything from there right?
Honestly i have no idea what you can do, but trying to eliminate some of the cases..
EDIT: you should try the first method ( http://forum.xda-developers.com/showthread.php?t=2470207&page=3 ) when using this files: https://www.dropbox.com/sh/3pqceuaqsji0dqn/nvR20mLqMF
if that what you did and it didn't worked im guessing that flashing the firmware wont help, but there are wiser people than me to help you, just wait for their input
Click to expand...
Click to collapse
I can't flash anymore, My LG G2 is completely dead, can't get into recovery and download mode, if I tried going to download my pc just say "USB NOT RECOGNIZED"

I've used the following to completely restore my phone and untrip the root checker...
Verizon: http://forum.xda-developers.com/showthread.php?t=2448960
Others: http://forum.xda-developers.com/showthread.php?t=2432476

Xyriin said:
I've used the following to completely restore my phone and untrip the root checker...
Verizon: http://forum.xda-developers.com/showthread.php?t=2448960
Others: http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
did your phone totally bricked when you did it? or you can still go to the download mode?
cause mine is totally can't on.

Do you have the LG bootlogo coming up, if so try this:
(Something similar happened to mine, and I hope this will help.)\
Turn off phone, then when off, hold down power and volume down button until it reaches the LG logo and then release and hold it down again, if that doesn't work, when just hold it down until you see a screen that says something like: Hard reset/ factory reset. For me it took me to my recovery screen, where I just flashed a older ROM onto it, and you should be fine. I then later flashed a recovery file. I hope this helps, and if you need it any clearer, just reply :fingers-crossed:

If it's saying usb not recongized I'd recommend installing the proper drivers for your specific model. Which model do you have since you didn't specifying? Also, dead or charged your phone should boot download mode with volume up being held and plugging the phone in via usb to your computer.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
If it's Verizon, follow that posted method above correctly. Check for correct com port numbers and make sure replacing the dll file your in the c: drive and not just in your download folder.

hiddenfive said:
Do you have the LG bootlogo coming up, if so try this:
(Something similar happened to mine, and I hope this will help.)\
Turn off phone, then when off, hold down power and volume down button until it reaches the LG logo and then release and hold it down again, if that doesn't work, when just hold it down until you see a screen that says something like: Hard reset/ factory reset. For me it took me to my recovery screen, where I just flashed a older ROM onto it, and you should be fine. I then later flashed a recovery file. I hope this helps, and if you need it any clearer, just reply :fingers-crossed:
Click to expand...
Click to collapse
My phone is completely off
ceredics said:
If it's saying usb not recongized I'd recommend installing the proper drivers for your specific model. Which model do you have since you didn't specifying? Also, dead or charged your phone should boot download mode with volume up being held and plugging the phone in via usb to your computer.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
If it's Verizon, follow that posted method above correctly. Check for correct com port numbers and make sure replacing the dll file your in the c: drive and not just in your download folder.
Click to expand...
Click to collapse
I have the D802, I already installed the drivers.
If I'm going to go to download mode, It says USB not Recognized and my phone is completely off.

I don't have too much experience with that model so hopefully someone else spying has more information. Sorry buddy.

There is no bootlogo at all? Not even when you turn it on? Try plugging it into a wall charger and if anything happens, also try changing your COM # to 41, if it isn't its Device Manager<Ports (COM & LPT), right click< properties< port settings< advanced..< COM 41, this was from this article I will link right here: http://forum.xda-developers.com/showthread.php?t=2582142
Hope this helps :good:

@3S0PHAGOOS how you did the fix?

cpaixao said:
@3S0PHAGOOS how you did the fix?
Click to expand...
Click to collapse
yes please enlighten us....I am going through the same process and I can not turn it on at all. NOthing comes on...

Send it to me, but if I fix it I get to keep the phone. Right?
Sent from my SM-T210R using XDA Premium 4 mobile app

3S0PHAGOOS said:
Phone fixed, please delete the thread.
Click to expand...
Click to collapse
How did you fix it?

Those experiencing this problem could try this
https://www.youtube.com/watch?v=E7zbs6of_4I
Btw, you should share the solution for those who are in the same situation.

impossible unbrick l7

Hi all!i've a problem.
After flashing a firmware phone remains in LG logo.
So i need to use kdz flasher to update.
But with 4 different PC(windows 8,windows7,windows XP) i can't update.
I have put phone in emergency mode (i tried different way:with battery and volume+ and power,without battery volume+and power,without battery volume+ and back) but in each mode i have error in flashing(homero 10k kdz): or port-1,phone was not found,or upgrade error wparam...
Drivers are installed.i tried 3gqt and emergency or diag mode.
I have flashed others times kdz without problems.
I don't know what to do now.
Other approaches?with CMD commands?
Or there is a way with Kdz flasher?
Help please!
Thanks

Try this http://d-h.st/Okx kdz flasher, launch windows enabler as admin, also launch kdz as admin.

I have the same problem i will try this and we will see...
---------- Post added at 01:54 PM ---------- Previous post was at 12:58 PM ----------
well... the phone displays the charging animation... and that's all, if i want to boot the phone i have a bootloop

i got this

e-53e said:
i got this
Click to expand...
Click to collapse
I this (attachment)

your phone is not detected maybe it' a driver error

I ve installed drivers from LG site. But in emergency device dont connect to port.
How do you go in emergency(battery removed..etc etc)?
Any solution to force detecting e install drivers in emergency?
Now i m on windows 8 64bit

fenomeno83 said:
I ve installed drivers from LG site. But in emergency device dont connect to port.
How do you go in emergency(battery removed..etc etc)?
Any solution to force detecting e install drivers in emergency?
Now i m on windows 8 64bit
Click to expand...
Click to collapse
i installed the drivers that all the tutorials are telling to download and it works

e-53e said:
i installed the drivers that all the tutorials are telling to download and it works
Click to expand...
Click to collapse
Can you link?

fenomeno83 said:
Hi all!i've a problem.
After flashing a firmware phone remains in LG logo.
So i need to use kdz flasher to update.
But with 4 different PC(windows 8,windows7,windows XP) i can't update.
I have put phone in emergency mode (i tried different way:with battery and volume+ and power,without battery volume+and power,without battery volume+ and back) but in each mode i have error in flashing(homero 10k kdz): or port-1,phone was not found,or upgrade error wparam...
Drivers are installed.i tried 3gqt and emergency or diag mode.
I have flashed others times kdz without problems.
I don't know what to do now.
Other approaches?with CMD commands?
Or there is a way with Kdz flasher?
Help please!
Thanks
Click to expand...
Click to collapse
which firmware did you flash?
hi from italy

AXD96 said:
which firmware did you flash?
hi from italy
Click to expand...
Click to collapse
Homero 10k
Ciao!

i think that the B2CAppSetup.exe drivers works

fenomeno83 said:
Homero 10k
Ciao!
Click to expand...
Click to collapse
do you resolved?

AXD96 said:
do you resolved?
Click to expand...
Click to collapse
Tomorrow i'll try.
PS: i work in Milan

fenomeno83 said:
Tomorrow i'll try.
PS: i work in Milan
Click to expand...
Click to collapse
Hi, As much I have seen you are trying to flash your phone via KDZ, you can try to repair your drivers by going to devices and then update driver and it will find newest, and try to flash V20A by Homero because if you were on V20 syste (4.1.2) you can't simply flash V10k by Homero, hope I helped.

e-53e said:
i got this
Click to expand...
Click to collapse
I have the same problem
Model: LG Optimius L7 II P714

solved!
Emergency mode WITH BATTERY INSERTED (without battery, the drivers don't work) -->go in emergency in this manner: without cable inserted, press volumeUP and power, and when phone vibrate release keys
The problems of "error wparams 100..." was because 10k of homero.
I have flashed 10k original https://disk.yandex.com/public/?hash=7G/SaZRIBwInyyrUn9rmSP9o/+9CXAXmXHHf3EMuVFI=
and it works!
After i have installed cwm (just cwm) http://forum.xda-developers.com/showpost.php?p=38231332&postcount=2230
and i can install coocked roms now!!!
ps: i used this (UpTestEX-mod_hf-marwin-beta): http://forum.xda-developers.com/showpost.php?p=49358448&postcount=2 (flash in 3qgct, emergency)

LG L3-E400 boot/brick problem

Hello i'm new to forum and need help for LG L3-E400 bricked phone.I had installed some 4.42 version ROM , after that i installed 4.04 stable (i forgot name) and it worked well while i had installed sa andreas and some games , and tried to expand his memory to 16 gb ( From video on youtube) and messed up with kernel (processor MHz-s).
I have tried many times with KDZ way , downloaded Europe firmware because i'm from Bosnia and from main site there is no firmware for Bosnia , tried flashing (3GQVCT-DIAG) , goes to 99% and got error Wparam 100 Lparam 6 , phone reboots and same thing happens LG LOGO / WHITESCREEN LG LOGO / WHITESCREEN. (EMERGENCY MODE WORKS)
I have installed LG mobile united drivers , some LGE AndroidNET modem drivers but my main drivers (Mass storage / LG USB E400) wont install because my phone always reboots. My device manager is always refreshed , tried also LG PC Suite but it dont recognize it ,LG Support Tool , also gets Error while upgrading.
Tried something like Offline KDZ but it wont do it or i have done something wrong (same error repeats Wparam 100 Lparam 6) , i had heard something about ADB but dont know how to use it.Tried also HARD RESET but its stuck in LG LOGO
So if someone knows how to repair pls tell me i'm desperate (

Stella Rossa said:
tried to expand his memory to 16 gb ( From video on youtube)
Click to expand...
Click to collapse
Will you please provide a link to that video so it'll be more clear?
Stella Rossa said:
downloaded Europe firmware because i'm from Bosnia and from main site there is no firmware for Bosnia
Click to expand...
Click to collapse
Do you have you device's details (the ones who are under settings --> about phone) like model number, baseband version, kernel version, build date and build number?
(I know that you can't access that menu, but maybe you wrote it somewhere?)
Stella Rossa said:
I have installed LG mobile united drivers , some LGE AndroidNET modem drivers but my main drivers (Mass storage / LG USB E400) wont install because my phone always reboots. My device manager is always refreshed , tried also LG PC Suite but it dont recognize it ,LG Support Tool , also gets Error while upgrading.
Click to expand...
Click to collapse
I think it'll be a good idea to remove everything you installed, and install only the latest official drivers from here. (You might want to change the region in the bottom of this page)
Please also verify that your KDZ-Flasher is version 1.0.4.4 or later (if there is a newer version).
If not, download it from here.
Stella Rossa said:
Tried something like Offline KDZ but it wont do it or i have done something wrong (same error repeats Wparam 100 Lparam 6)
Click to expand...
Click to collapse
I always have this error. I think until Wparam 200 if I remember right (yeah - 100 error lines!).
I just wait until it's finished, and then let the magic happen - the phone reboots to my stock version, and the KDZ application is crashing (but it's okay...).
Stella Rossa said:
So if someone knows how to repair pls tell me i'm desperate (
Click to expand...
Click to collapse
Don't be.
You are in a good community.
Just be as clear as possible, and provide as much information as you can so we'll be able o help you in the best way.
BTW, because I don't have this device anymore, I give you what I can from my memory and from what I have in my computer.
Nevertheless, I'll do my best to help you out.

I will post link later , now im going to uninstall drivers , dont know device details , downloaded new KDZ from your link , will try it soon as possible.Tnx

Stella Rossa said:
I will post link later , now im going to uninstall drivers , dont know device details , downloaded new KDZ from your link , will try it soon as possible.Tnx
Click to expand...
Click to collapse
Here it is its name because i cant copy link
Memoria Interna LG L3 16 GB Tutorial ITA

Stella Rossa said:
Here it is its name because i cant copy link
Memoria Interna LG L3 16 GB Tutorial ITA
Click to expand...
Click to collapse
Thanks!
Where are you standing with this problem?
Did you try again to re-flash stock version with KDZ-flasher?

need4steer said:
Thanks!
Where are you standing with this problem?
Did you try again to re-flash stock version with KDZ-flasher?
Click to expand...
Click to collapse
I will try again today with KDZ and drivers from links above.

I have tried again but fail , recorded a video of updating so it will be on youtube that u can watch what happens,today will upload.

Stella Rossa said:
I have tried again but fail , recorded a video of updating so it will be on youtube that u can watch what happens,today will upload.
Click to expand...
Click to collapse
Thanks!
I'll be waiting for this video.

need4steer said:
Thanks!
I'll be waiting for this video.
Click to expand...
Click to collapse
Here it is , go to SystemizeR87 channel on Youtube because i cant post link here.

Stella Rossa said:
Here it is , go to SystemizeR87 channel on Youtube because i cant post link here.
Click to expand...
Click to collapse
First, I'll post it for you so others will be able to watch it easily:
Will you please try to flash my stock firmware - V10F_00
No need to record another video.
I just want to see if it's firmware dependent.
BTW, you wrote:
Stella Rossa said:
My device manager is always refreshed
Click to expand...
Click to collapse
What do you mean?
Are you now only with the newest drivers from the link I gave you?
Do you have any exclamation mark in the device manager?
Did you try using another USB port (preferably one that is connected to your motherboard and not to your chassis)?

need4steer said:
First, I'll post it for you so others will be able to watch it easily:
Will you please try to flash my stock firmware - V10F_00
No need to record another video.
I just want to see if it's firmware dependent.
BTW, you wrote:
What do you mean?
Are you now only with the newest drivers from the link I gave you?
Do you have any exclamation mark in the device manager?
Did you try using another USB port (preferably one that is connected to your motherboard and not to your chassis)?
Click to expand...
Click to collapse
Will try this firmware now , drivers installed froom your links , tried 2 USB ports as i have them , in device manager just refreshes , rare using direct connection with case , because i have a USB cable extension , so its easily to connect
Tried first time and when he going to reboot , i went to device manager and its one exclamation mark.WHen he refreshes mark is in Storage volumes/Generic volume
There are 2 generic volumes and when phone reboots , third one is blinking with mark as phone restarts fast.
is there any way to install recovery or custom kernel maybe it is the problem ??

Stella Rossa said:
Will try this firmware now , drivers installed froom your links , tried 2 USB ports as i have them , in device manager just refreshes , rare using direct connection with case , because i have a USB cable extension , so its easily to connect
Tried first time and when he going to reboot , i went to device manager and its one exclamation mark.WHen he refreshes mark is in Storage volumes/Generic volume
There are 2 generic volumes and when phone reboots , third one is blinking with mark as phone restarts fast.
is there any way to install recovery or custom kernel maybe it is the problem ??
Click to expand...
Click to collapse
I didn't understand if you're connecting your phone directly to your motherboard without any cable extension.
If you don't - please do.
Then please enter emergency mode, and only then look on the device manager.
What do you see? Is everything okay, or you're having an exclamation / question mark?
If everything is okay, only then continue to flash the stock firmware.

need4steer said:
I didn't understand if you're connecting your phone directly to your motherboard without any cable extension.
If you don't - please do.
Then please enter emergency mode, and only then look on the device manager.
What do you see? Is everything okay, or you're having an exclamation / question mark?
If everything is okay, only then continue to flash the stock firmware.
Click to expand...
Click to collapse
How do u mean motherboard , in USB port , i have them 2 in behind of case ?
I will try them now.

Stella Rossa said:
How do u mean motherboard , in USB port , i have them 2 in behind of case ?
I will try them now.
Click to expand...
Click to collapse
Not working , same error , noticed that your firmware installs slower than others , anyway here is log if u need it.
http://www.sendspace.com/file/0trn0l

Stella Rossa said:
How do u mean motherboard , in USB port , i have them 2 in behind of case ?
I will try them now.
Click to expand...
Click to collapse
Yeah, exactly these 2 ports. Try one of these.
Then enter emergency mode, and then look at the device manager.
If everything is okay (you have no exclamation / question marks) continue to flash the stock firmware with KDZ-flasher.
---------- Post added at 07:33 PM ---------- Previous post was at 07:32 PM ----------
Stella Rossa said:
Not working , same error , noticed that your firmware installs slower than others , anyway here is log if u need it.
http://www.sendspace.com/file/0trn0l
Click to expand...
Click to collapse
Okay, what about the device manager?

need4steer said:
Yeah, exactly these 2 ports. Try one of these.
Then enter emergency mode, and then look at the device manager.
If everything is okay (you have no exclamation / question marks) continue to flash the stock firmware with KDZ-flasher.
---------- Post added at 07:33 PM ---------- Previous post was at 07:32 PM ----------
Okay, what about the device manager?
Click to expand...
Click to collapse
Device manager is OK n exclamation marks.

try this
Stella Rossa said:
e400.
Click to expand...
Click to collapse
considering device manager is ok now you can skip removing anything related to lg, if not do so and download lg mobile support tool
1 plug phone in normal (lg) mode
2 run lg mobile support tool
3 select recovery upgrade from options in top right
4 type your imei to according box (*#06# to get it)
and start upgrade
it will download the newest available kdz for your model and flash it
and even if you get error near the end it should give you your phone back like from factory
you might need to repeat process couple of times but it WILL work

Stella Rossa said:
Device manager is OK n exclamation marks.
Click to expand...
Click to collapse
The drivers are okay, the software is okay, the stock firmware is okay - so it's only your phone / your cable / your computer.
The next thing is to try to connect your phone with another cable, or the same cable to another computer.
IGGYVIP said:
considering device manager is ok now you can skip removing anything related to lg, if not do so and download lg mobile support tool
1 plug phone in normal (lg) mode
2 run lg mobile support tool
3 select recovery upgrade from options in top right
4 type your imei to according box (*#06# to get it)
and start upgrade
it will download the newest available kdz for your model and flash it
and even if you get error near the end it should give you your phone back like from factory
you might need to repeat process couple of times but it WILL work
Click to expand...
Click to collapse
There's no normal mode for him. He is in a boot loop...

need4steer said:
The drivers are okay, the software is okay, the stock firmware is okay - so it's only your phone / your cable / your computer.
The next thing is to try to connect your phone with another cable, or the same cable to another computer.
There's no normal mode for him. He is in a boot loop...
Click to expand...
Click to collapse
@Stella Rossa did you try booting in safe mode i belive its same as e430 UP+DOWN+HOME (full boot) POWER (6 sec.)
otherwise if no access to what he said you google resetting all usb ports in your system it helped me once with bad flashes

IGGYVIP said:
@Stella Rossa did you try booting in safe mode i belive its same as e430 UP+DOWN+HOME (full boot) POWER (6 sec.)
otherwise if no access to what he said you google resetting all usb ports in your system it helped me once with bad flashes
Click to expand...
Click to collapse
I had taken phone to LG service , thank u all for helping me and keep up good work.

STUCK at LG Logo, NO Download mode..Please HELP!!

hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!

TEDET123 said:
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
Click to expand...
Click to collapse
use flashtool with another *dll

His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.

bender_007 said:
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
Click to expand...
Click to collapse
thanks for replying guys..appreciate it!
yes..download mode is not functional.
When connect to pc at 'Factory hard reset mode' screen (vol- and pwr pressed, letgo and pressed)..nothing happens on either PC or Mobile..
After Hard reset, phone continue stuck at LG LOGO.. PC detected mobile as "LGE AndroidNet USB Serial Port (COM41)", see attached.
I have tried the method in the link above but the PC seems cannot detect phone during cmd "ls /dev/sd*" and "gdisk -l /dev/sdb" .

someone please help..

TEDET123 said:
someone please help..
Click to expand...
Click to collapse
Hey,
I'm currently having some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!

shark_max said:
Hey,
I'm currently have some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
Click to expand...
Click to collapse
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:

TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!

TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !

shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
the screenshot stays forever (trying to get into download mode) and did not enter the actual download screen.
if continue to boot, the phone will just hang at LG Logo.

shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
LG Support tool was unable to detect my phone..

patriky said:
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
Click to expand...
Click to collapse
I did this but phone just stays at the 2nd screenshot...
before it was bricked, I have no problem get it into download mode with vol+ and usb cable.

TEDET123 said:
LG Support tool was unable to detect my phone..
Click to expand...
Click to collapse
Wait so what can you do? Hard reset? Download mode? Nothing?
Can you plug your phone and check that your phone is not detected in device manager?
All the drivers are installed?

Same issue
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!

I would try to force the phone into qhsusb mode then flash only laf.img,aboot.img and boot.img
In qhsub mode you should be able to see the SDB partition
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
FaseehUllah said:
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
Click to expand...
Click to collapse

Same problem.

Same problem
now can i go back to fast boot mode?

someone please help..

Same problem, please helpp

Same Problem ...... flashing unknown rom and now stuck on LG logo and not entering to download mode please help !! Experts ??