Database Users

Atom Pure GSM Signal Problem ! Help !

I recently have been given a 2nd hand Atom Pure, but when i insert any valid simcard, the atom won't get a signal.
I don't know if locked or unlocked, but I didn't get any warning like " Invalid Simcard " or something else, the atom just can't get any signal ( tried 3 different simcard from 3 different operator )
Anyone have any idea to repair it ? maybe reflash the Radio part ?
I have simmiliar problem with old Qtek smartphone which can't get off the "Flight Mode", tried reflash it didnot work, sent it to warranty and come back healthy ( the seal did not even teared, so maybe it can be done via software ?? )
I can't send it to warranty, cause my friend give it to me from out of country, and I even didn't know that my atom still in warranty period or not.
Please help, It would be a waste if I can't get the GSM part work again
BTW, the ROM 20060426B1WWE.
Thank you

did you tried to reflash ROM?

No, not yet.
I'll try it, as soon as I finish downloading, I'll post the result
Thank you

I download :Xda-Atom-ENG-20060426-MOT0822_1.exe
Flashed the ROM, another problem appear !!
Upgrading Image Rom .......... Succeed
Upgrading BootLoader........... Succeed
Upgrading Ext Rom............... Succeed
Upgrading Radio Stack........... Succeed
Burn Radio Stack.................. Connection Error
Now I stuck at Utility Update screen ???!!
Tried to flash it second time, still got the error
Any idea to fix this ????
Please Help. Thank you

try to flash the older rom

tried to reflash it again, with another PC new active sync 4.2, still the same problem.
Tried to download official rom update fromm seeo2.com, it says there's no update rom for my atom (based on IMEI number, already preloded with the latest ROM), so I can't find the link to download.
@kropotov
Thank you so much for helping me in short notice, If you don't mind would you please give me the link to the older ROM ?? Can't find it here in forum.
Thank you

Try this:
Xda-Atom-ENG-20060105.exe
http://www.rapidshare.ru/91168

@kropotov
Thank you !!, I'll post the result !!!

Just reflashed again with official rom (Xda-Atom-ENG-20060426.exe), "Connection Error" Again ! (tried on three different PC)
Is there another way beside reflashing the ROM ?
Thank you

Xda-Atom-ENG-20060105.exe the result is the same ! tried on 3 different pc.
Is there any way that I can update it via Mini SD card ?
Any other way ?? please help

I thing the problem - the radio stack is locked by operator.... Try to serch for "unlock radio stack"

see here
http://forum.xda-developers.com/showthread.php?t=266758&highlight=unlock+radio

I've read above link you gave me, but it seem all the tools must be used in healthy state or at least can enter in to bootloader mode. while mine can't do anything, stuck in update utility screen (tried all button combination known to man)
I found a way to enter in bootloader mode, but when enter bootloader with mini sd inserted (dummy) it says "Start downloading". what I'm asking which way downloading proccess ?? atom to SD or SD to Atom ?
I found WM5 tool for dumping rom, it not specified for certain device. If I enable to dump healthy image rom to SD (from another and the same version rom of Atom), Is there any way that I can flash it to broken atom without in boot loader mode ??
I will keep reading above link you give me, I will be waiting your next suggestion and help.
Thank you so much.

http://forum.xda-developers.com/showthread.php?t=276664

the problem is I can't get into bootloder mode, always stuck in Upgrade Utility????. tried all button combination though
thank's

Found a way, use rec + camera + reset button.
In DM mode choose Exit DM, and my Ayom live again !!!!!!
BUT, Can't find any GSM in Wireless Setting, WTF !!!!!!
Tried to reflash it again
Thanks

reflash it in normal mode, result GSM gone. reflash it second time in bootloader mode, result good, GSM setting come back, but still can't find any signal ?!
Do I get GSM hardware error ?? or something ??
Thank you

there's a Selftest app. in the programs group, should use it to see what result will return after a GSM module test.

Already did, Self test in program menu and in Diagnostic menu. All result OK.
Just can get signal, I can't make Emergency call either.
Opened the Atom, Antena ok, all seems normal.

[Q] Problems with flashing new firmware on Samsung I8700 Omnia 7

I can't seem to get my Omnia 7 to communicate with Win7 via USB cable in Download Mode. I use Win7 Pro x64.
I've installed:
I8700_Samsung_Mobile_USB_Driver(V5.2)_V1.2.1050.0
I run:
I8700_WP7_Downloader_Ver_7.03_For_Retail_Device_(Product_Force_Select)_
I've even tried uninstalling all Samsung USB drivers, reinstalling them and restarting my system, but I still can't get it to work.
When I start the WP7 Downloader, it says "MD5 Confirm Process: Cannot Image File Please Try Again!" in a dialog named "Confirm MD5 Value". What is that all about? There are no MD5 files in the firmware package that I've downloaded (I8700XXJJ4). If I click "Close", the application dialog opens, but I get no connection to the phone via a COM port.
What am I doing wrong?
[UPDATE!]
I got my Omnia 7 to connect by starting up the WP7 Downloader BEFORE I rebooted the phone into Download Mode. However, I'm still getting the "MD5 Confirm Process: Cannot Image File Please Try Again!" in a dialog named "Confirm MD5 Value". Please help!

Please post in the proper forums. If you have an issue related specifically to that device, please post it there. This is for WP7 development as a whole, and device specific problems go in their proper forums and subsections.
~~Tito~~

To flash, you have to start WP7 Downloader before you plug your Omnia 7 in download mode. And then you'll see a new COM port. (h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21328])
Be carefull : the XXJJ4 firmware seems not to work. It's not a valid binary retail file whereas the DTMJJ6 works fine. I'll flash my Omnia 7 one week ago. (]h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21326]) The DTMJJ6 is a T-Online branded ROM.
My Omnia 7 is a French Orange branded device and with the DTMJJ6, some features don't work anymore as data transfert without WiFi. It's the reason why I advise you to wait an other ROM. In my case I'm waiting for a dump of the original ROM or a new I8700XX.. files but still nothing...

firmware
where did you get the firmware or update, is it possible to get firmwares for other phones like the focus,

Please,
i have I8700XXJJ6 WITH CSC TMUJJ6, the phone is locked to T-mobile UK, and i'm downloading DTMJJ6, will this rom work, if yes, will the phone be unlocked ?
Thanks,
B.R.

It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?

Erwan960 said:
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Click to expand...
Click to collapse
The new ROM feels snappier due to the better 3g/wireless speeds and gets rid of the horrible tmobile branded IE and searches.
Over all definitely worth trying.

So it's the JK1 which is needed, not the JJ6.

Erwan960 said:
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Click to expand...
Click to collapse
to get it unlocked friend ! how can i do it ?

I'm having the same issue, but as far as i know, this problem is related due a replacement of the original download (yellow triangle warning screen) mode by a 'recover mode' (picture of an windows branded phone connecting to a pc).
Is there any other way to set the correct download mode besides using that jig device?
I got some response from the software setting 'Modem, USB Diag.' on the micro USB Test. When I did this, the phone was detected by WP7 Downloader, but the phone was in the wp7 home screen and not in download mode (I chose not try anything).
My Omnia 7 is an unlocked device using SFR branding (JJ6, that october one).

DanMaxis said:
I'm having the same issue, but as far as i know, this problem is related due a replacement of the original download (yellow triangle warning screen) mode by a 'recover mode' (picture of an windows branded phone connecting to a pc).
Is there any other way to set the correct download mode besides using that jig device?
I got some response from the software setting 'Modem, USB Diag.' on the micro USB Test. When I did this, the phone was detected by WP7 Downloader, but the phone was in the wp7 home screen and not in download mode (I chose not try anything).
My Omnia 7 is an unlocked device using SFR branding (JJ6, that october one).
Click to expand...
Click to collapse
DanMaxis,
There might be a way without a jig. In principal you could try updating right through to nodo which would give you the new Bootloader that allows flashing.
What you have to do is "unbrand" your phone with the Samsung unbrand xap which can be found in the wp7 developer forum. (First or second page)
Of course you need to apply the chevron unlock for it.
After having done that you will be able to receive the pre Nodo update and then the Nodo update with the "cut connection after 4 seconds" trick.
After these updates are installed your bootloader should be the new one. This will in theory enable you to reflash a different rom onto it.
In theory... because I havent tried yet.
I encounter an error on my Omnia 7 that it timed out after the first update. This is a common issue among Samsung users (as has been reported all across the web) and the only way to fix it is to hard reset the phone.

Hi!
I updated my device (Omnia 7) to Nodo with the Chevron Tool but the Firmware (2424.10.10.6) and the bootloader (4.10.1.9) are still the same...
There's no new firmware yet?
With this bootloader I can't access to the downlaod mode... the jig is the only way?
Thank you very much!!!

I don't think the MD5 error relates to phone communication - I got this when I tried to open the update file from within a compressed folder - you have to extract the file that is downloaded to another folder then open it through the update tool. You'll also get an MD5 error if you enter the wrong password for the file.
The Control at the bottom left of the update tool window tells you if the phone is connected or not and is separate to actually opening the update files (turns green and says which Comm port the phone is on if the phone is connected properly).
Hope this helps.

do85 said:
Hi!
I updated my device (Omnia 7) to Nodo with the Chevron Tool but the Firmware (2424.10.10.6) and the bootloader (4.10.1.9) are still the same...
There's no new firmware yet?
With this bootloader I can't access to the downlaod mode... the jig is the only way?
Thank you very much!!!
Click to expand...
Click to collapse
Dude, I'm having the same issue. I've found out now that appeared a 'Samsung Update for Windows Phone Devices' and Zune cant update my phone... I tried to format the device but still wont work.

DanMaxis said:
Dude, I'm having the same issue. I've found out now that appeared a 'Samsung Update for Windows Phone Devices' and Zune cant update my phone... I tried to format the device but still wont work.
Click to expand...
Click to collapse
Where's appeared the Samsung Update for Windows Phone Devices? On Zune??!?

do85 said:
Where's appeared the Samsung Update for Windows Phone Devices? On Zune??!?
Click to expand...
Click to collapse
Yes, I think it is the issue described here....
www[dot]winrumors.com/microsoft-reportedly-warns-against-using-chervonwp7-nodo-updater/?utm_source=twitterfeed&utm_medium=twitter&utm_campaign=Feed%3A+WinRumors+%28WinRumors%29&utm_content=Twitter

I've ordered this JIG http:\\cgi.ebay.com/Samsung-Galaxy-S-Omnia-7-Fix-Download-Mode-USB-jig-/130475201436
Let's see what happens.

Can't flash my i8700 Three 3

i have a i8700 from three 3 uk and when i try to flash the only working rom from samfirmware i get the mesage your device is not a retail device downloader will not do anything to your device. all the locks are off in the locks menu...what can i do to update my phone...

The JJ4 ROM doesn't work. Only the JJ6 does.
h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21326

when i try jj6 happens what i junt said

i8700
i have the same problem any solution?

Flashing ROM / Samsung Update tool Failure

I finally got my JIG and was able to put the phone in the DOWNLOAD mode.
1) After that I tried to update my faulty bootloader (4.10.1.9) using the guide - http://forum.xda-developers.com/showthread.php?t=1019112 but I got stuck with the message "CONFIRM PHONE MODEL" !!
2) Then I tried flashing the ROM "I8700 XEN I8700XENJK1" and subsequently "I8700XXKC1_XXKB2" (using all 4 files - csc,eb0,nb0,bin) but got the same error.
(I had installed the Samsung drivers - "I8700_Samsung_Mobile_USB_Driver_V5.2__V1.2.1050.0") before doing the above mentioned steps.
3) Next I tried to use the Samsung update tool "Device_Update_Support_Tool_for_OMNIA7_KC3_Ver1.2" and it detected the phone correctly but after clicking START, it stopped at 12% with the error "SLDR WRITE FLASH Failed".
So for me even after putting the phone in the DOWNLOAD mode using he JIG, it am unable to overwrite my faulty bootloader.
My Phone Info:
OS Version: 7.0.7390.0
Firmware revision number: 0222.10.10.6
Radio software version: 2424.10.10.6
Bootloader version: 4.10.1.9
Carrier: Orange (Switzerland)
By the way, my wife has the same phone from Orange and I have tried the same steps with her phone and it had the same errors reported.
So it looks like all the SAMSUNG OMNIA 7 phones from Orange Switzerland may have issues !!
Any help would be appreciated.

Attaching the screen-shots for the errors
Attaching the screen-shot of the errors that I explained in my previous post.View attachment 605821
View attachment 605822

Sameer Battoo said:
Attaching the screen-shot of the errors that I explained in my previous post.View attachment 605821
View attachment 605822
Click to expand...
Click to collapse
to the first pic - confirm model name:
I had this as well when I didn't put the phone in download mode by mistake
after I was in download mode, flashing my device went without any errors
cheers,
simon

Had the exacly same issue (sldr write flash failed, stuck at 13%). Bootloader 4.10.1.9. I wanted to execute the Device_Update_Support_Tool_for_OMNIA7_KC3_Ver1.2 to update to latest WP7 version. I tried on another computer and it worked.

Flashing Lumia 950xl with New Rom (Something went wrong with IMEI)

my phone(lumia950xl) got bricked and i decided to flash it with a new rom, phone perfectly working after flash bad i cant get mobile network to work, when i check my imei in info it says ''IMEI SV -10'' but when i enter *#06# it shows the real imei of the phone, any idea what went wrong ? for sure i downloaded and install the correct firmware from lumiafirmware . com matching my code, even now that the phone works microsoft recovery tool cant find my phone, it says cant read product code-product type
please help

Phone recovery
You can try reflashing your phone with this tool. It will automatically download the correct country - operator firmware for your phone:
support.microsoft.com/en-us/help/12379/windows-10-mobile-device-recovery-tool-faq