Related
I have T-mobile compact with English ROM
Several weeks ago I flashed it with I-mate ROM from this site. Today I tried to flash with new ROM from swedish Qtec (from this site). Upgrade process was OK (without any mistakes), but when I reboot devise it became dead - I have "Serial" sign when device is disconnected from PC and "USB" - when connected.
I tried to re-flash device, but I get "Country Id Error". Can you help?
I have the same problem, when i tried to upgrade with the roms from edsub topic.
i also get a Model ID error, with the official t-mobile update
HI_TMNL_17200_190_11700_Ship.exe
hope someone can help us, very soon
Hi,
Does anyone knows a method for repairing my old P3300.
The problem is i've tried to upgrade to wm6 and something went wrong,
ATM i only have a screen with the Tmobile logo,
I can open the bootloader, but if i load the bootloader and try to run the official rom update i get the error 122 cannot connect to device.
If i'm in the bootloader and try to start mtty, it all goes as it is supposed to go
I can see the phone in mtty and can get it into flash mode when i enter the bootloader password.
Even when the phone is in this mode the official upgrade won't see the device.
So my question: is there a way to flash/upgrade the rom from mtty?
If yes what are the commands for it in mtty.
If not does anybody know an other solution?
Btw it's a sim unlocked and Cid unlocked P3300 From the Netherlands Tmobile.
IPL 1.13.0001
SPL 1.13.0000
GSM 02.49.90
OS 3.4.0.0
Thanks
Janus
Same here, I think we need the original T-Mobile rom.
RaZoR X said:
Same here, I think we need the original T-Mobile rom.
Click to expand...
Click to collapse
sounds like you did't run the USPL before you burned your Rom, try and do a search on this in the forum, there are plenty of fixes to get your phones up and running again.
another tip, look at the wiki and download Tmobile UK/Ger version, that should do the trick at least to get your phone running, then make sure you do the USPL before you brick it again.
neilhhardy said:
sounds like you did't run the USPL before you burned your Rom, try and do a search on this in the forum, there are plenty of fixes to get your phones up and running again.
another tip, look at the wiki and download Tmobile UK/Ger version, that should do the trick at least to get your phone running, then make sure you do the USPL before you brick it again.
Click to expand...
Click to collapse
I did ran the USPL.
I took a look @ the wiki, but I think those files (all of them are less then 100k) are theme files.
"T-Mobile_NL_MDA_Compact_III_1.13.114.1_NLD_ExtROM"
IPL: 3.13.0001
SPL: 3.13.0000
The USB is working
With the "PDA Phone ROM Update Utility 3.6.3.1." from HTC I tried to get the MDA functional again.
In the Verify the ROM you want to update window it says this:
From:
Image version: -blank-
To
Image version 3.13.405.1
But after 2% sometimes 7%, it says this: "Error [244]:Invaild model ID".
So maybe the USPL didn't went well.
At the Artemis_Upgrades section of the wiki there isn't a T-Mobile file to download. The language doesn't matter to me.
Which device are you guys trying to flash with a new ROM, if its a UK T-Mobile device its not got the WiFi hardware so don't go putting a ROM on the device that expects WiFi support, T-Mobile Artemis units from Holland did have WiFi built in as does the true HTC P3300 unit, the UK T-Mobile device does not - Mike
RaZoR X said:
I did ran the USPL.
I took a look @ the wiki, but I think those files (all of them are less then 100k) are theme files.
"T-Mobile_NL_MDA_Compact_III_1.13.114.1_NLD_ExtROM"
IPL: 3.13.0001
SPL: 3.13.0000
The USB is working
With the "PDA Phone ROM Update Utility 3.6.3.1." from HTC I tried to get the MDA functional again.
In the Verify the ROM you want to update window it says this:
From:
Image version: -blank-
To
Image version 3.13.405.1
But after 2% sometimes 7%, it says this: "Error [244]:Invaild model ID".
So maybe the USPL didn't went well.
At the Artemis_Upgrades section of the wiki there isn't a T-Mobile file to download. The language doesn't matter to me.
Click to expand...
Click to collapse
ok hear'd this one many times before, your running vista >?
try and search the forum, there is a fix for this then your phone.
@Mike it's the "Dutch" version with indeed WiFi
@Neilhhardy
No, I'm not running Windows Vista at the moment.
Me too have the same problem - flash allways stop at 2% , also can`t flash radio - stop at 73-75% - any idea?
the phone is original HTC (have Wi-Fi and not branded) - never CID locked go to bootloader without any problems but can`t flasing - I think case problem is standart HTC flasher exe - for early models have different flasher software - I have Jaf WM but Jaf WM do not support Artemis - did have released other soft that alow flashing Artemis?
P.S - I thing cause right solution is to flash your device with original version - the OEM version that was instaled by factory will fix the problem
this worked for me on a unlocked mda compact 3
format your memory card first with your pc then copy the rom file (nbh)to your memorycard and rename it to ARTEIMG.nbh
start bootloader and follow the instructions.
http://wiki.xda-developers.com/index..._Card_Flashing
rom i used http://makus.folijka.pl/OrbitO2UK.rar
I found the right solution and fix my phone stop at 2% is hapenind when the phone was flashed before cid unlock (bricked) and can be restored ONLY with ORIGINAL version for that phone
1. go to www.htc.com then go to support area and register your headset by they own htc serial number!!! this is most important step!
2. download update soft - the supportsite know what exactly is rirgt version and language for your pda
3. Flash your phone and will be alive
4. USPL and make after that what you want with your headset
TESTED and WORKED for dead phones(but phone must go to the bootloader)
I did a reset with the rec, pwrbutton and resetbutton. And now he's up and running agian with WM6 Haha
I tried to unlock the device with the AthenaUnlocker, but I got this error:
0x0, 0x100000, SPL-verify.nb
I think I killed him lol
ppl said:
I found the right solution and fix my phone stop at 2% is hapenind when the phone was flashed before cid unlock (bricked) and can be restored ONLY with ORIGINAL version for that phone
1. go to www.htc.com then go to support area and register your headset by they own htc serial number!!! this is most important step!
2. download update soft - the supportsite know what exactly is rirgt version and language for your pda
3. Flash your phone and will be alive
4. USPL and make after that what you want with your headset
TESTED and WORKED for dead phones(but phone must go to the bootloader)
Click to expand...
Click to collapse
this may had worked for you but at the HTC website I get the error that my phone is not branded. true it's a tmobile phone...
can you give me the serial number you entered? if you dont trust it you may make the last 3 digits a X
thanks
Janus
I can't seem to get my Omnia 7 to communicate with Win7 via USB cable in Download Mode. I use Win7 Pro x64.
I've installed:
I8700_Samsung_Mobile_USB_Driver(V5.2)_V1.2.1050.0
I run:
I8700_WP7_Downloader_Ver_7.03_For_Retail_Device_(Product_Force_Select)_
I've even tried uninstalling all Samsung USB drivers, reinstalling them and restarting my system, but I still can't get it to work.
When I start the WP7 Downloader, it says "MD5 Confirm Process: Cannot Image File Please Try Again!" in a dialog named "Confirm MD5 Value". What is that all about? There are no MD5 files in the firmware package that I've downloaded (I8700XXJJ4). If I click "Close", the application dialog opens, but I get no connection to the phone via a COM port.
What am I doing wrong?
[UPDATE!]
I got my Omnia 7 to connect by starting up the WP7 Downloader BEFORE I rebooted the phone into Download Mode. However, I'm still getting the "MD5 Confirm Process: Cannot Image File Please Try Again!" in a dialog named "Confirm MD5 Value". Please help!
Please post in the proper forums. If you have an issue related specifically to that device, please post it there. This is for WP7 development as a whole, and device specific problems go in their proper forums and subsections.
~~Tito~~
To flash, you have to start WP7 Downloader before you plug your Omnia 7 in download mode. And then you'll see a new COM port. (h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21328])
Be carefull : the XXJJ4 firmware seems not to work. It's not a valid binary retail file whereas the DTMJJ6 works fine. I'll flash my Omnia 7 one week ago. (]h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21326]) The DTMJJ6 is a T-Online branded ROM.
My Omnia 7 is a French Orange branded device and with the DTMJJ6, some features don't work anymore as data transfert without WiFi. It's the reason why I advise you to wait an other ROM. In my case I'm waiting for a dump of the original ROM or a new I8700XX.. files but still nothing...
firmware
where did you get the firmware or update, is it possible to get firmwares for other phones like the focus,
Please,
i have I8700XXJJ6 WITH CSC TMUJJ6, the phone is locked to T-mobile UK, and i'm downloading DTMJJ6, will this rom work, if yes, will the phone be unlocked ?
Thanks,
B.R.
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Erwan960 said:
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Click to expand...
Click to collapse
The new ROM feels snappier due to the better 3g/wireless speeds and gets rid of the horrible tmobile branded IE and searches.
Over all definitely worth trying.
So it's the JK1 which is needed, not the JJ6.
Erwan960 said:
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Click to expand...
Click to collapse
to get it unlocked friend ! how can i do it ?
I'm having the same issue, but as far as i know, this problem is related due a replacement of the original download (yellow triangle warning screen) mode by a 'recover mode' (picture of an windows branded phone connecting to a pc).
Is there any other way to set the correct download mode besides using that jig device?
I got some response from the software setting 'Modem, USB Diag.' on the micro USB Test. When I did this, the phone was detected by WP7 Downloader, but the phone was in the wp7 home screen and not in download mode (I chose not try anything).
My Omnia 7 is an unlocked device using SFR branding (JJ6, that october one).
DanMaxis said:
I'm having the same issue, but as far as i know, this problem is related due a replacement of the original download (yellow triangle warning screen) mode by a 'recover mode' (picture of an windows branded phone connecting to a pc).
Is there any other way to set the correct download mode besides using that jig device?
I got some response from the software setting 'Modem, USB Diag.' on the micro USB Test. When I did this, the phone was detected by WP7 Downloader, but the phone was in the wp7 home screen and not in download mode (I chose not try anything).
My Omnia 7 is an unlocked device using SFR branding (JJ6, that october one).
Click to expand...
Click to collapse
DanMaxis,
There might be a way without a jig. In principal you could try updating right through to nodo which would give you the new Bootloader that allows flashing.
What you have to do is "unbrand" your phone with the Samsung unbrand xap which can be found in the wp7 developer forum. (First or second page)
Of course you need to apply the chevron unlock for it.
After having done that you will be able to receive the pre Nodo update and then the Nodo update with the "cut connection after 4 seconds" trick.
After these updates are installed your bootloader should be the new one. This will in theory enable you to reflash a different rom onto it.
In theory... because I havent tried yet.
I encounter an error on my Omnia 7 that it timed out after the first update. This is a common issue among Samsung users (as has been reported all across the web) and the only way to fix it is to hard reset the phone.
Hi!
I updated my device (Omnia 7) to Nodo with the Chevron Tool but the Firmware (2424.10.10.6) and the bootloader (4.10.1.9) are still the same...
There's no new firmware yet?
With this bootloader I can't access to the downlaod mode... the jig is the only way?
Thank you very much!!!
I don't think the MD5 error relates to phone communication - I got this when I tried to open the update file from within a compressed folder - you have to extract the file that is downloaded to another folder then open it through the update tool. You'll also get an MD5 error if you enter the wrong password for the file.
The Control at the bottom left of the update tool window tells you if the phone is connected or not and is separate to actually opening the update files (turns green and says which Comm port the phone is on if the phone is connected properly).
Hope this helps.
do85 said:
Hi!
I updated my device (Omnia 7) to Nodo with the Chevron Tool but the Firmware (2424.10.10.6) and the bootloader (4.10.1.9) are still the same...
There's no new firmware yet?
With this bootloader I can't access to the downlaod mode... the jig is the only way?
Thank you very much!!!
Click to expand...
Click to collapse
Dude, I'm having the same issue. I've found out now that appeared a 'Samsung Update for Windows Phone Devices' and Zune cant update my phone... I tried to format the device but still wont work.
DanMaxis said:
Dude, I'm having the same issue. I've found out now that appeared a 'Samsung Update for Windows Phone Devices' and Zune cant update my phone... I tried to format the device but still wont work.
Click to expand...
Click to collapse
Where's appeared the Samsung Update for Windows Phone Devices? On Zune??!?
do85 said:
Where's appeared the Samsung Update for Windows Phone Devices? On Zune??!?
Click to expand...
Click to collapse
Yes, I think it is the issue described here....
www[dot]winrumors.com/microsoft-reportedly-warns-against-using-chervonwp7-nodo-updater/?utm_source=twitterfeed&utm_medium=twitter&utm_campaign=Feed%3A+WinRumors+%28WinRumors%29&utm_content=Twitter
I've ordered this JIG http:\\cgi.ebay.com/Samsung-Galaxy-S-Omnia-7-Fix-Download-Mode-USB-jig-/130475201436
Let's see what happens.
Hi,
I can't update my Omnia 7 with Zune anymore after the Mango update.
My Omnia 7 is Orange UK branded.
SO: 7.10.7720.68
Firmware 0222.11.8.5
Hardware 3.15.0.4
Radio 2424.11.7.2
Bootloader 5.8.1.9
SOC 0.36.2.0
Before all: after the Mango update I noticed that any compass software works as the bluetooth, I can't pair my bluetooth headset.
Now I received a push notification that a new software update is available, I tried to do it with Zune, but step 7 (install upgrade) doesn't works as in past (the progress bar increase slowly). After some seconds Zune reset the phone and after the boot Zune says: error 80180048.
I found a solution from Microsoft, using the "Windows Phone Support Tool", but it can't connect to hte phone, it says:
The phone is not in the 'Connect to PC' state. Please make sure that you follow the instructions and your phone shows the 'Connect To PC' image
Instead I turn on the phone with camera button pressed and I can see the "Connect to PC" image on the phone.
I also tried to use the recovery tool from Samsung (downloadable from the Samsung support website), I enter in download mode (camera + vol up + power on buttons) and the program seems to do its job, but anything change during upgrades...
I read in Microsoft Answer forum that it could be a faulty bootloader problem,
can anyone help me? Thanks
L.
I have the same firmware revision numbers as yourself. (I'm on Orange UK Branded) except i'm now on .7740
When you plug into Zune, what update is offered to you? Is it listed as offering Outlook bug fixes and Voicemail bug fixes?
Or does it say it's a Samsung update for windows phone?
Hi,
thanks for your reply.
Yes, Zune offer 7740 update, with Outlook bug fix, ...
But do bluetooth and compass work on your phone?
Regae said:
Hi,
thanks for your reply.
Yes, Zune offer 7740 update, with Outlook bug fix, ...
But do bluetooth and compass work on your phone?
Click to expand...
Click to collapse
Bluetooth used to work well... since Mango / 7720 it stopped working properly. Now it only reliably connects if i turn WiFi off. Otherwise it will search and find once.. then never again until i soft-reset.
Compass... it's hit and miss. I've tried a few apps and i can't get them to calibrate so no.. not really.
It seems everyone else has been offered a firmware upgrade apart from Orange :/ I don't get why I was sent out the 7740 fix and left on old firmware.
As far as your problem with updating go, did you try the simple fixes of plugging directly into a USB2 port at the back of the PC not using an extension.
And also I always delete all I can from my phone before I upgrade it. On my 8gb phone I don't leave more than 2gb data on it to update and it's been fine for me so far... I just remove things like music and movies as they are easy to re-sync quickly afterwards.
If not i've read of people having that bug resolved with a hard-reset. Although that's annoying for you :/
I tried to connect the phone on a USB port on the PC back, but I've the same problem.
I also hard reset my phone some days ago, but it didn't solve my problem.
...Zune doesn't perform step 8 (installing), now I'm sure it's cause the phone can't enter correctly in download mode.
...I'm annoyed at Orange and Samsung.
Regae said:
I tried to connect the phone on a USB port on the PC back, but I've the same problem.
I also hard reset my phone some days ago, but it didn't solve my problem.
...Zune doesn't perform step 8 (installing), now I'm sure it's cause the phone can't enter correctly in download mode.
...I'm annoyed at Orange and Samsung.
Click to expand...
Click to collapse
Hmm :/ I know i had a faulty bootloader version.. i couldnt get into download mode. I had to use a resistor jig.
However when i got mango my bootloader changed and it works now. Can you not enter download mode at all?
I can enter in download mode using the 3 buttons combo (cam + vol up + power), and using the 2 buttons (cam + power), the download mode you enter with the jig connector isn't the same of the buttons combo?
Btw neither if Zune enter in download mode nor if I manually enter with buttons combo to use "Windows Phone Support Tool" I can flash the phone. Zune return error 80180048, the other program says "The phone is not in the 'Connect to PC' state. Please make sure that you follow the instructions and your phone shows the 'Connect To PC' image".
Regae said:
I can enter in download mode using the 3 buttons combo (cam + vol up + power), and using the 2 buttons (cam + power), the download mode you enter with the jig connector isn't the same of the buttons combo?
Btw neither if Zune enter in download mode nor if I manually enter with buttons combo to use "Windows Phone Support Tool" I can flash the phone. Zune return error 80180048, the other program says "The phone is not in the 'Connect to PC' state. Please make sure that you follow the instructions and your phone shows the 'Connect To PC' image".
Click to expand...
Click to collapse
No it should be the same. Download mode shows a yellow triangle.
Conect to Pc mode just shows the cable/laptop image as it does when you update the phone.
I'd guess that since you can enter bootloader / download mode that's not the issue...
I'm with you on the whole Annoyed with Samsung though.. Bring on my upgrade and a Nokia!
Hey Freypal I agree with you Im also on Orange (Uk) with the Omnia 7 and great I have the 7740 update but on Firmware. Tweeted Orange yesterday and there support staff dont seem to know anything about the Firmware update
We Neeeeeeed WiFi Tethering
But do they listen.................No
branstonmedia said:
Hey Freypal I agree with you Im also on Orange (Uk) with the Omnia 7 and great I have the 7740 update but on Firmware. Tweeted Orange yesterday and there support staff dont seem to know anything about the Firmware update
We Neeeeeeed WiFi Tethering
But do they listen.................No
Click to expand...
Click to collapse
:/ Annoying huh ?
Do you have ....
OS ver 7.10.7740.16
Firmware Rev 0222.11.8.5
Hardware Rev 3.15.0.4
Radio Software 2424.11.7.2
Radio Hardware 0.0.0.800
Bootloader ver 5.8.1.9
Chip SOC 0.36.2.0
yep same number here
me too same problem, the WP Support tool didn't resolve the problem.
same problem today with attempted update to 7740
Zune told today that 7740 available and update installed fine. Also got tethering update week ago. Unbranded retail phone.
Sent from my OMNIA7 using Board Express
Same problem for me. Trying to troubleshoot now.
Edit: Tried troubleshooting with @WinPhoneSupport, but no resolution. They're now "looking into the error": https://twitter.com/#!/WinPhoneSupport/status/142341050084769792
the same problem. I have mango with "wrong" czech language (edit in registry for activate it). Do you think this is the reason of failed update?
mimonaut said:
the same problem. I have mango with "wrong" czech language (edit in registry for activate it). Do you think this is the reason of failed update?
Click to expand...
Click to collapse
I can't be sure, but I doubt it. I haven't activated any languages.
I've just noticed this error has been reported from a user with an HTC HD7 as well, so it's not isolated to the Omnia.
https://twitter.com/#!/asshenoy/status/142780998554361857
Regae said:
Hi,
I can't update my Omnia 7 with Zune anymore after the Mango update.
My Omnia 7 is Orange UK branded.
SO: 7.10.7720.68
Firmware 0222.11.8.5
Hardware 3.15.0.4
Radio 2424.11.7.2
Bootloader 5.8.1.9
SOC 0.36.2.0
Before all: after the Mango update I noticed that any compass software works as the bluetooth, I can't pair my bluetooth headset.
Now I received a push notification that a new software update is available, I tried to do it with Zune, but step 7 (install upgrade) doesn't works as in past (the progress bar increase slowly). After some seconds Zune reset the phone and after the boot Zune says: error 80180048.
I found a solution from Microsoft, using the "Windows Phone Support Tool", but it can't connect to hte phone, it says:
The phone is not in the 'Connect to PC' state. Please make sure that you follow the instructions and your phone shows the 'Connect To PC' image
Instead I turn on the phone with camera button pressed and I can see the "Connect to PC" image on the phone.
I also tried to use the recovery tool from Samsung (downloadable from the Samsung support website), I enter in download mode (camera + vol up + power on buttons) and the program seems to do its job, but anything change during upgrades...
I read in Microsoft Answer forum that it could be a faulty bootloader problem,
can anyone help me? Thanks
L.
Click to expand...
Click to collapse
Same problem here. Only difference for me is :-
Firmware 2424.11.9.4
Radio 2424.11.9.1
Bootloader 5.9.3.0
Newer versions than yours but still the same problem.
It's not a big problem now as the phone works great and the update is only minimal.
Omnia 7 - same problem
Hi Guys ,
I have a Samsung Omnia 7 with this details :
OS :7.10.7720.68
Firmware 2424.11.9.4
Radio 2424.11.9.1
Bootloader 5.9.3.0
I have the same problem when trying to update to 7740 . Error : error 80180048.
I tried with Zune and with WP7 update cab tool .
Have you found a way to make this working ?
Or the only whay is to put another rom( with NODO) on the phone and try to do all the updates .
Thanks,
Claudiu
Since you tried reset your phone,why not flash an other rom?maybe an unbranded rom can help
Appologise me for my english, i'm from Romania; i've got an note 3 and i changed his firmware ( with Odin) with an original one from Hungary(the phone was bought from Orange Romania) with Android 4.4 and than i rooted it. After that i found that i have some problems with signal and i changed his firmware again with an Romanian one from Cosmote because this one was not branded too. After i 've changed it for the second time i found some problems too and i decided to try to put the original firmware from Orange Romania and i received an erorr in the download screen"SW REV CHECK FAIL : Fused 1 > Binary 0"and the screen change into "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried to conect with Kies but the program tells me that the device is not compatible(tried with Kies 3).
Can you please help me, i don't know what to do.
Are you trying to flash back Android 4.3? If yes, it's not possible at the moment to go back to 4.3 if you flashed Android 4.4.
dragub said:
Appologise me for my english, i'm from Romania; i've got an note 3 and i changed his firmware ( with Odin) with an original one from Hungary(the phone was bought from Orange Romania) with Android 4.4 and than i rooted it. After that i found that i have some problems with signal and i changed his firmware again with an Romanian one from Cosmote because this one was not branded too. After i 've changed it for the second time i found some problems too and i decided to try to put the original firmware from Orange Romania and i received an erorr in the download screen"SW REV CHECK FAIL : Fused 1 > Binary 0"and the screen change into "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried to conect with Kies but the program tells me that the device is not compatible(tried with Kies 3).
Can you please help me, i don't know what to do.
Click to expand...
Click to collapse
Download this : https://mega.co.nz/#!jZYkyY5a!HfiJlXRgp_ZGWoQncFNWeEn5FnY_0i9iFb23EGfg2Nk , enter in Download mode (Vol down + power+home), connect the phone to pc, open Odin, upload the .tar file, from the download, to PDA in odin and start flash. It will work.
dragub said:
Appologise me for my english, i'm from Romania; i've got an note 3 and i changed his firmware ( with Odin) with an original one from Hungary(the phone was bought from Orange Romania) with Android 4.4 and than i rooted it. After that i found that i have some problems with signal and i changed his firmware again with an Romanian one from Cosmote because this one was not branded too. After i 've changed it for the second time i found some problems too and i decided to try to put the original firmware from Orange Romania and i received an erorr in the download screen"SW REV CHECK FAIL : Fused 1 > Binary 0"and the screen change into "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried to conect with Kies but the program tells me that the device is not compatible(tried with Kies 3).
Can you please help me, i don't know what to do.
Click to expand...
Click to collapse
If you are trying to downgrade from 4.4 to 4.3, don't even bother as bootloader would stop it from downgrading. Hence, softbricking the phone...