Related
Hi all,
This is my first post :x
I downloaded the ROM (4.00.10) from the kitchen. At first, I downloaded EXE file but when I start upgrading my Qtek reboot and nothing happen, I tried many times. I read about upgrading via SD. I did upgrading without any problem. BUT when it finish upgrading, my device won't start. It hangs-up at splash screen and showing ROM version and Radio Version only. I tried many many times with no success.
I need some help please
my device info:
ROM version: 3.18.04 ENG
ROM date: 05/22/03
Radio version: 4.21.00
Protocol version: 32s54
--
Model No.: PW10A1
Bootloader 5.22
--
Thank you in advance
Bailamos
Download again with NB0 then upgrade from your SD.
Download again with nb1 then upgrade from your SD.
Thank you, socheat.
But I did download nb1 and I tried upgrading with the sd method and the upgrading was successfully but my device won't startup it shows only the splash screen ( NOT FOR SALE ** Powered By Micro$oft ** ) and nothing happen after this screen
I restored my old rom (3.18.04 ENG) and the device is working now, but I want to upgrade to WM2003 :roll:
Is that cuz I upgrade the Radio ? my old radio version was 3.25 ( not sure ).
Thank you , All
Bailamos
Got same problem with you Bailamos
My Bootloader is 5.17
Now by XDArit + SD flash + Wallaby patch, I brought my XDA back to 3.20.06 original from O2 already.
Wondering should I downgrade Bootloader to 5.15 or not?
In XDArit it has one upper box which we can put Bootloader in.
Should I put something like "loader515.nb0" in that box during loading OS on SD?????
UP :? Please
update
Please , I need help.
I tried to downgrade my device:
Bootloader 5.22 => 5.15
ROM 3.18.04 => 14.04
I thought it may help upgrading but that complicate the problem!!
NOW , I can't do any upgrade. When I insert the SD card and start booting, it show me the boot screen : PRESS ACTION to start downloading. as soon as I press ACTION it show : GSM OK and nothing happened!!!! It looks like I pressed the exit button ( I PRESSED the ACTION )
The EXE method still not working , the same as before as soon as it shows : 5 min screen , my device restart and it lose the connection with the ActiveSynic
ANY one CAN help ? P L E A S E
Pretty Please
Thank you
yes it will loose sync, but just leave it there!
some times it takes 10 minutes
but it will finish updating, trust me! that worked several times for me.
Thank you , ntabikha.
I'll give it a shot right now.
it didn't work
when my device re-start , the Program ( 1.09 ) show this message:
Can not open a COM/USB Port. Please use Device Manager on PC to make sure that COM/USB port is available and working properly
and terminate immediately after pressing " Ok "
I think there is something I don't know !! but there is someone may know !!
Is that happening cuz I upgraded my Radio Stack ?????????? ???? ???
It was something about 3.xx and it is now 4.21 !!!!!
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
sumaetee said:
Got same problem with you Bailamos
My Bootloader is 5.17
Now by XDArit + SD flash + Wallaby patch, I brought my XDA back to 3.20.06 original from O2 already.
Wondering should I downgrade Bootloader to 5.15 or not?
In XDArit it has one upper box which we can put Bootloader in.
Should I put something like "loader515.nb0" in that box during loading OS on SD?????
Click to expand...
Click to collapse
Have you tried doing it without the Wallaby patch part? If not give that a try, no on the bootloader downgrade part!
HTH
Hello
I did downgrade my Radio stack. It was 4.21 now it is 3.23.01
But that didn't change anything. I'm still can't upgrade my device to 2003.
The problem is:
Method 1: (Program A / B)
my device re-start and the program showing this error msg:
" Can not open a COM/USB Port. Please use Device Manager on PC to make sure that COM/USB port is available and working properly "
Method 2: (SD)
It shows me the upgrading screen
Press ACTION to start downloading
BUT when I press action it go the bootloader main menu:
GSM OK
!!!!!!
That's it !!!
At the first time, my device was able to upgrade but it freez after finishing the upgrade. Now, it wan't even upgrading !!
ANY HELP !! PLEASE ??
** to the people who saying you can't downgrade your radio stack , that's not right .. YOU CAN .. I DID IT **
Bailamos
Hello,
I Flashed my P3600 starting from WM 5 with Trinity_Rom_NiAl_Build_23504.
It worked but not at all (pine nuts) so I decided to upgrade again.
The second one, the upgrade stopped while he was runnung and I did the recovery procedure as suggested by the upgrade.
Now when I connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash I got the Message Error[270] Update Error
Ur Image file is corrupted.
The bar % run till 1% and the device swich off immediatly.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.06.0000
Please Help me.
Thank You
msmbrt said:
Hello,
I Flashed my P3600 starting from WM 5 with Trinity_Rom_NiAl_Build_23504.
It worked but not at all (pine nuts) so I decided to upgrade again.
The second one, the upgrade stopped while he was runnung and I did the recovery procedure as suggested by the upgrade.
Now when I connect in bootloader mode to pc USB connection is activated.
But every rom version i try to flash I got the Message Error[270] Update Error
Ur Image file is corrupted.
The bar % run till 1% and the device swich off immediatly.
In >Bootloader<
TRIN100
IPL-0.50
Trin100
SPL-1.06.0000
Please Help me.
Thank You
Click to expand...
Click to collapse
Error may appear due to corrupt image ROM. download the entire RUU and try again.
In General for archive with firmware.
I've already tried with another RUU but it works the same; really it means not to recognize the ROM installed because if I run the utility and click update to read the ROM just installed and the ROM to update, the utility recognizes only the new but not the present ROM.
The first time I ran it, the utility recognized the installed ROM too and it finished well.
msmbrt said:
I've already tried with another RUU but it works the same; really it means not to recognize the ROM installed because if I run the utility and click update to read the ROM just installed and the ROM to update, the utility recognizes only the new but not the present ROM.
The first time I ran it, the utility recognized the installed ROM too and it finished well.
Click to expand...
Click to collapse
Well.
In an active sinc disconnect connection on USB
- Download splxploit_HTC_Trinity
- Unpack and start
- Then stitch...
Should work
I can't seem to get my Omnia 7 to communicate with Win7 via USB cable in Download Mode. I use Win7 Pro x64.
I've installed:
I8700_Samsung_Mobile_USB_Driver(V5.2)_V1.2.1050.0
I run:
I8700_WP7_Downloader_Ver_7.03_For_Retail_Device_(Product_Force_Select)_
I've even tried uninstalling all Samsung USB drivers, reinstalling them and restarting my system, but I still can't get it to work.
When I start the WP7 Downloader, it says "MD5 Confirm Process: Cannot Image File Please Try Again!" in a dialog named "Confirm MD5 Value". What is that all about? There are no MD5 files in the firmware package that I've downloaded (I8700XXJJ4). If I click "Close", the application dialog opens, but I get no connection to the phone via a COM port.
What am I doing wrong?
[UPDATE!]
I got my Omnia 7 to connect by starting up the WP7 Downloader BEFORE I rebooted the phone into Download Mode. However, I'm still getting the "MD5 Confirm Process: Cannot Image File Please Try Again!" in a dialog named "Confirm MD5 Value". Please help!
Please post in the proper forums. If you have an issue related specifically to that device, please post it there. This is for WP7 development as a whole, and device specific problems go in their proper forums and subsections.
~~Tito~~
To flash, you have to start WP7 Downloader before you plug your Omnia 7 in download mode. And then you'll see a new COM port. (h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21328])
Be carefull : the XXJJ4 firmware seems not to work. It's not a valid binary retail file whereas the DTMJJ6 works fine. I'll flash my Omnia 7 one week ago. (]h**p://pdaphoneaddict.com/forum/viewtopic.php?f=133&t=21326]) The DTMJJ6 is a T-Online branded ROM.
My Omnia 7 is a French Orange branded device and with the DTMJJ6, some features don't work anymore as data transfert without WiFi. It's the reason why I advise you to wait an other ROM. In my case I'm waiting for a dump of the original ROM or a new I8700XX.. files but still nothing...
firmware
where did you get the firmware or update, is it possible to get firmwares for other phones like the focus,
Please,
i have I8700XXJJ6 WITH CSC TMUJJ6, the phone is locked to T-mobile UK, and i'm downloading DTMJJ6, will this rom work, if yes, will the phone be unlocked ?
Thanks,
B.R.
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Erwan960 said:
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Click to expand...
Click to collapse
The new ROM feels snappier due to the better 3g/wireless speeds and gets rid of the horrible tmobile branded IE and searches.
Over all definitely worth trying.
So it's the JK1 which is needed, not the JJ6.
Erwan960 said:
It won't be unlocked with the new ROM...
Why do you want to change your JJ6 ROM for an other JJ6 one ?
Click to expand...
Click to collapse
to get it unlocked friend ! how can i do it ?
I'm having the same issue, but as far as i know, this problem is related due a replacement of the original download (yellow triangle warning screen) mode by a 'recover mode' (picture of an windows branded phone connecting to a pc).
Is there any other way to set the correct download mode besides using that jig device?
I got some response from the software setting 'Modem, USB Diag.' on the micro USB Test. When I did this, the phone was detected by WP7 Downloader, but the phone was in the wp7 home screen and not in download mode (I chose not try anything).
My Omnia 7 is an unlocked device using SFR branding (JJ6, that october one).
DanMaxis said:
I'm having the same issue, but as far as i know, this problem is related due a replacement of the original download (yellow triangle warning screen) mode by a 'recover mode' (picture of an windows branded phone connecting to a pc).
Is there any other way to set the correct download mode besides using that jig device?
I got some response from the software setting 'Modem, USB Diag.' on the micro USB Test. When I did this, the phone was detected by WP7 Downloader, but the phone was in the wp7 home screen and not in download mode (I chose not try anything).
My Omnia 7 is an unlocked device using SFR branding (JJ6, that october one).
Click to expand...
Click to collapse
DanMaxis,
There might be a way without a jig. In principal you could try updating right through to nodo which would give you the new Bootloader that allows flashing.
What you have to do is "unbrand" your phone with the Samsung unbrand xap which can be found in the wp7 developer forum. (First or second page)
Of course you need to apply the chevron unlock for it.
After having done that you will be able to receive the pre Nodo update and then the Nodo update with the "cut connection after 4 seconds" trick.
After these updates are installed your bootloader should be the new one. This will in theory enable you to reflash a different rom onto it.
In theory... because I havent tried yet.
I encounter an error on my Omnia 7 that it timed out after the first update. This is a common issue among Samsung users (as has been reported all across the web) and the only way to fix it is to hard reset the phone.
Hi!
I updated my device (Omnia 7) to Nodo with the Chevron Tool but the Firmware (2424.10.10.6) and the bootloader (4.10.1.9) are still the same...
There's no new firmware yet?
With this bootloader I can't access to the downlaod mode... the jig is the only way?
Thank you very much!!!
I don't think the MD5 error relates to phone communication - I got this when I tried to open the update file from within a compressed folder - you have to extract the file that is downloaded to another folder then open it through the update tool. You'll also get an MD5 error if you enter the wrong password for the file.
The Control at the bottom left of the update tool window tells you if the phone is connected or not and is separate to actually opening the update files (turns green and says which Comm port the phone is on if the phone is connected properly).
Hope this helps.
do85 said:
Hi!
I updated my device (Omnia 7) to Nodo with the Chevron Tool but the Firmware (2424.10.10.6) and the bootloader (4.10.1.9) are still the same...
There's no new firmware yet?
With this bootloader I can't access to the downlaod mode... the jig is the only way?
Thank you very much!!!
Click to expand...
Click to collapse
Dude, I'm having the same issue. I've found out now that appeared a 'Samsung Update for Windows Phone Devices' and Zune cant update my phone... I tried to format the device but still wont work.
DanMaxis said:
Dude, I'm having the same issue. I've found out now that appeared a 'Samsung Update for Windows Phone Devices' and Zune cant update my phone... I tried to format the device but still wont work.
Click to expand...
Click to collapse
Where's appeared the Samsung Update for Windows Phone Devices? On Zune??!?
do85 said:
Where's appeared the Samsung Update for Windows Phone Devices? On Zune??!?
Click to expand...
Click to collapse
Yes, I think it is the issue described here....
www[dot]winrumors.com/microsoft-reportedly-warns-against-using-chervonwp7-nodo-updater/?utm_source=twitterfeed&utm_medium=twitter&utm_campaign=Feed%3A+WinRumors+%28WinRumors%29&utm_content=Twitter
I've ordered this JIG http:\\cgi.ebay.com/Samsung-Galaxy-S-Omnia-7-Fix-Download-Mode-USB-jig-/130475201436
Let's see what happens.
Hi,
I can't update my Omnia 7 with Zune anymore after the Mango update.
My Omnia 7 is Orange UK branded.
SO: 7.10.7720.68
Firmware 0222.11.8.5
Hardware 3.15.0.4
Radio 2424.11.7.2
Bootloader 5.8.1.9
SOC 0.36.2.0
Before all: after the Mango update I noticed that any compass software works as the bluetooth, I can't pair my bluetooth headset.
Now I received a push notification that a new software update is available, I tried to do it with Zune, but step 7 (install upgrade) doesn't works as in past (the progress bar increase slowly). After some seconds Zune reset the phone and after the boot Zune says: error 80180048.
I found a solution from Microsoft, using the "Windows Phone Support Tool", but it can't connect to hte phone, it says:
The phone is not in the 'Connect to PC' state. Please make sure that you follow the instructions and your phone shows the 'Connect To PC' image
Instead I turn on the phone with camera button pressed and I can see the "Connect to PC" image on the phone.
I also tried to use the recovery tool from Samsung (downloadable from the Samsung support website), I enter in download mode (camera + vol up + power on buttons) and the program seems to do its job, but anything change during upgrades...
I read in Microsoft Answer forum that it could be a faulty bootloader problem,
can anyone help me? Thanks
L.
I have the same firmware revision numbers as yourself. (I'm on Orange UK Branded) except i'm now on .7740
When you plug into Zune, what update is offered to you? Is it listed as offering Outlook bug fixes and Voicemail bug fixes?
Or does it say it's a Samsung update for windows phone?
Hi,
thanks for your reply.
Yes, Zune offer 7740 update, with Outlook bug fix, ...
But do bluetooth and compass work on your phone?
Regae said:
Hi,
thanks for your reply.
Yes, Zune offer 7740 update, with Outlook bug fix, ...
But do bluetooth and compass work on your phone?
Click to expand...
Click to collapse
Bluetooth used to work well... since Mango / 7720 it stopped working properly. Now it only reliably connects if i turn WiFi off. Otherwise it will search and find once.. then never again until i soft-reset.
Compass... it's hit and miss. I've tried a few apps and i can't get them to calibrate so no.. not really.
It seems everyone else has been offered a firmware upgrade apart from Orange :/ I don't get why I was sent out the 7740 fix and left on old firmware.
As far as your problem with updating go, did you try the simple fixes of plugging directly into a USB2 port at the back of the PC not using an extension.
And also I always delete all I can from my phone before I upgrade it. On my 8gb phone I don't leave more than 2gb data on it to update and it's been fine for me so far... I just remove things like music and movies as they are easy to re-sync quickly afterwards.
If not i've read of people having that bug resolved with a hard-reset. Although that's annoying for you :/
I tried to connect the phone on a USB port on the PC back, but I've the same problem.
I also hard reset my phone some days ago, but it didn't solve my problem.
...Zune doesn't perform step 8 (installing), now I'm sure it's cause the phone can't enter correctly in download mode.
...I'm annoyed at Orange and Samsung.
Regae said:
I tried to connect the phone on a USB port on the PC back, but I've the same problem.
I also hard reset my phone some days ago, but it didn't solve my problem.
...Zune doesn't perform step 8 (installing), now I'm sure it's cause the phone can't enter correctly in download mode.
...I'm annoyed at Orange and Samsung.
Click to expand...
Click to collapse
Hmm :/ I know i had a faulty bootloader version.. i couldnt get into download mode. I had to use a resistor jig.
However when i got mango my bootloader changed and it works now. Can you not enter download mode at all?
I can enter in download mode using the 3 buttons combo (cam + vol up + power), and using the 2 buttons (cam + power), the download mode you enter with the jig connector isn't the same of the buttons combo?
Btw neither if Zune enter in download mode nor if I manually enter with buttons combo to use "Windows Phone Support Tool" I can flash the phone. Zune return error 80180048, the other program says "The phone is not in the 'Connect to PC' state. Please make sure that you follow the instructions and your phone shows the 'Connect To PC' image".
Regae said:
I can enter in download mode using the 3 buttons combo (cam + vol up + power), and using the 2 buttons (cam + power), the download mode you enter with the jig connector isn't the same of the buttons combo?
Btw neither if Zune enter in download mode nor if I manually enter with buttons combo to use "Windows Phone Support Tool" I can flash the phone. Zune return error 80180048, the other program says "The phone is not in the 'Connect to PC' state. Please make sure that you follow the instructions and your phone shows the 'Connect To PC' image".
Click to expand...
Click to collapse
No it should be the same. Download mode shows a yellow triangle.
Conect to Pc mode just shows the cable/laptop image as it does when you update the phone.
I'd guess that since you can enter bootloader / download mode that's not the issue...
I'm with you on the whole Annoyed with Samsung though.. Bring on my upgrade and a Nokia!
Hey Freypal I agree with you Im also on Orange (Uk) with the Omnia 7 and great I have the 7740 update but on Firmware. Tweeted Orange yesterday and there support staff dont seem to know anything about the Firmware update
We Neeeeeeed WiFi Tethering
But do they listen.................No
branstonmedia said:
Hey Freypal I agree with you Im also on Orange (Uk) with the Omnia 7 and great I have the 7740 update but on Firmware. Tweeted Orange yesterday and there support staff dont seem to know anything about the Firmware update
We Neeeeeeed WiFi Tethering
But do they listen.................No
Click to expand...
Click to collapse
:/ Annoying huh ?
Do you have ....
OS ver 7.10.7740.16
Firmware Rev 0222.11.8.5
Hardware Rev 3.15.0.4
Radio Software 2424.11.7.2
Radio Hardware 0.0.0.800
Bootloader ver 5.8.1.9
Chip SOC 0.36.2.0
yep same number here
me too same problem, the WP Support tool didn't resolve the problem.
same problem today with attempted update to 7740
Zune told today that 7740 available and update installed fine. Also got tethering update week ago. Unbranded retail phone.
Sent from my OMNIA7 using Board Express
Same problem for me. Trying to troubleshoot now.
Edit: Tried troubleshooting with @WinPhoneSupport, but no resolution. They're now "looking into the error": https://twitter.com/#!/WinPhoneSupport/status/142341050084769792
the same problem. I have mango with "wrong" czech language (edit in registry for activate it). Do you think this is the reason of failed update?
mimonaut said:
the same problem. I have mango with "wrong" czech language (edit in registry for activate it). Do you think this is the reason of failed update?
Click to expand...
Click to collapse
I can't be sure, but I doubt it. I haven't activated any languages.
I've just noticed this error has been reported from a user with an HTC HD7 as well, so it's not isolated to the Omnia.
https://twitter.com/#!/asshenoy/status/142780998554361857
Regae said:
Hi,
I can't update my Omnia 7 with Zune anymore after the Mango update.
My Omnia 7 is Orange UK branded.
SO: 7.10.7720.68
Firmware 0222.11.8.5
Hardware 3.15.0.4
Radio 2424.11.7.2
Bootloader 5.8.1.9
SOC 0.36.2.0
Before all: after the Mango update I noticed that any compass software works as the bluetooth, I can't pair my bluetooth headset.
Now I received a push notification that a new software update is available, I tried to do it with Zune, but step 7 (install upgrade) doesn't works as in past (the progress bar increase slowly). After some seconds Zune reset the phone and after the boot Zune says: error 80180048.
I found a solution from Microsoft, using the "Windows Phone Support Tool", but it can't connect to hte phone, it says:
The phone is not in the 'Connect to PC' state. Please make sure that you follow the instructions and your phone shows the 'Connect To PC' image
Instead I turn on the phone with camera button pressed and I can see the "Connect to PC" image on the phone.
I also tried to use the recovery tool from Samsung (downloadable from the Samsung support website), I enter in download mode (camera + vol up + power on buttons) and the program seems to do its job, but anything change during upgrades...
I read in Microsoft Answer forum that it could be a faulty bootloader problem,
can anyone help me? Thanks
L.
Click to expand...
Click to collapse
Same problem here. Only difference for me is :-
Firmware 2424.11.9.4
Radio 2424.11.9.1
Bootloader 5.9.3.0
Newer versions than yours but still the same problem.
It's not a big problem now as the phone works great and the update is only minimal.
Omnia 7 - same problem
Hi Guys ,
I have a Samsung Omnia 7 with this details :
OS :7.10.7720.68
Firmware 2424.11.9.4
Radio 2424.11.9.1
Bootloader 5.9.3.0
I have the same problem when trying to update to 7740 . Error : error 80180048.
I tried with Zune and with WP7 update cab tool .
Have you found a way to make this working ?
Or the only whay is to put another rom( with NODO) on the phone and try to do all the updates .
Thanks,
Claudiu
Since you tried reset your phone,why not flash an other rom?maybe an unbranded rom can help
Appologise me for my english, i'm from Romania; i've got an note 3 and i changed his firmware ( with Odin) with an original one from Hungary(the phone was bought from Orange Romania) with Android 4.4 and than i rooted it. After that i found that i have some problems with signal and i changed his firmware again with an Romanian one from Cosmote because this one was not branded too. After i 've changed it for the second time i found some problems too and i decided to try to put the original firmware from Orange Romania and i received an erorr in the download screen"SW REV CHECK FAIL : Fused 1 > Binary 0"and the screen change into "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried to conect with Kies but the program tells me that the device is not compatible(tried with Kies 3).
Can you please help me, i don't know what to do.
Are you trying to flash back Android 4.3? If yes, it's not possible at the moment to go back to 4.3 if you flashed Android 4.4.
dragub said:
Appologise me for my english, i'm from Romania; i've got an note 3 and i changed his firmware ( with Odin) with an original one from Hungary(the phone was bought from Orange Romania) with Android 4.4 and than i rooted it. After that i found that i have some problems with signal and i changed his firmware again with an Romanian one from Cosmote because this one was not branded too. After i 've changed it for the second time i found some problems too and i decided to try to put the original firmware from Orange Romania and i received an erorr in the download screen"SW REV CHECK FAIL : Fused 1 > Binary 0"and the screen change into "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried to conect with Kies but the program tells me that the device is not compatible(tried with Kies 3).
Can you please help me, i don't know what to do.
Click to expand...
Click to collapse
Download this : https://mega.co.nz/#!jZYkyY5a!HfiJlXRgp_ZGWoQncFNWeEn5FnY_0i9iFb23EGfg2Nk , enter in Download mode (Vol down + power+home), connect the phone to pc, open Odin, upload the .tar file, from the download, to PDA in odin and start flash. It will work.
dragub said:
Appologise me for my english, i'm from Romania; i've got an note 3 and i changed his firmware ( with Odin) with an original one from Hungary(the phone was bought from Orange Romania) with Android 4.4 and than i rooted it. After that i found that i have some problems with signal and i changed his firmware again with an Romanian one from Cosmote because this one was not branded too. After i 've changed it for the second time i found some problems too and i decided to try to put the original firmware from Orange Romania and i received an erorr in the download screen"SW REV CHECK FAIL : Fused 1 > Binary 0"and the screen change into "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried to conect with Kies but the program tells me that the device is not compatible(tried with Kies 3).
Can you please help me, i don't know what to do.
Click to expand...
Click to collapse
If you are trying to downgrade from 4.4 to 4.3, don't even bother as bootloader would stop it from downgrading. Hence, softbricking the phone...