Database Users

STUCK at LG Logo, NO Download mode..Please HELP!!

hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!

TEDET123 said:
hi all,
I have posted my G2 problem in another thread but was hoping more people can see it and help me...
PHONE Stuck at LG Logo after power up.
NO Download Mode,
here goes..
Believed I was conned... and this could be what happened to my LG G2 'D802':
my mobile is actually a D801 phone (motherboard) NOT D802 but loaded with D802 ROM
Phone was flashed (by me) with D802 ROM to remove error "Unfortunately, the process com.android.systemui has stopped" caused by corrupted Build.Prop system file during some editing.
touch screen error after new ROM was flashed (tried many diff roms), likely due to incompatible phone settings.
unable to flash D801 kdz since the phone was configured to 'D802', incorrect model detected while trying to flash.
managed to get a D801 TOT file that can resolved the incompatible model issue
Flash completed, phone rebooted..STUCKED at LG LOGO!
pressed Vol+ and USB cable, cannot enter download mode...stucked..
Factory reset using hardware keys, same problem..
please help ! any suggestion/s would be greatly appreciated!! thank you!!
Click to expand...
Click to collapse
use flashtool with another *dll

His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.

bender_007 said:
His download mode is not functional.
When in factory reset - connect to pc(does it throw errors or add a new device?)
If yes..then - read this
If no then still read it.
Click to expand...
Click to collapse
thanks for replying guys..appreciate it!
yes..download mode is not functional.
When connect to pc at 'Factory hard reset mode' screen (vol- and pwr pressed, letgo and pressed)..nothing happens on either PC or Mobile..
After Hard reset, phone continue stuck at LG LOGO.. PC detected mobile as "LGE AndroidNet USB Serial Port (COM41)", see attached.
I have tried the method in the link above but the PC seems cannot detect phone during cmd "ls /dev/sd*" and "gdisk -l /dev/sdb" .

someone please help..

TEDET123 said:
someone please help..
Click to expand...
Click to collapse
Hey,
I'm currently having some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!

shark_max said:
Hey,
I'm currently have some issue too but not the same it seems ..
Have you tried this: http://forum.xda-developers.com/showthread.php?t=2656275 ?
Hope it will help!
Click to expand...
Click to collapse
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:

TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!

TEDET123 said:
hey thanks!
i have tried the method in the link but mobile cannot get into download mode...:crying::crying:
Click to expand...
Click to collapse
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !

shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
the screenshot stays forever (trying to get into download mode) and did not enter the actual download screen.
if continue to boot, the phone will just hang at LG Logo.

shark_max said:
But you did in one of your screenshot ...
Anyway, when you let the phone continue to boot, what happend? lot of force close?
Edit : Antoher solution : have you tried to use the official LG Support tool? I did once when my device was completely f****ed up and it restored it by itself!
Click to expand...
Click to collapse
LG Support tool was unable to detect my phone..

patriky said:
Just plug your cable to usb. Turn off phone and inmediately hold the button up and ull be in download mode.
Or If U have 801 rom try to root your phone and do recovery as 801 phone, after flash 802 rom !
Click to expand...
Click to collapse
I did this but phone just stays at the 2nd screenshot...
before it was bricked, I have no problem get it into download mode with vol+ and usb cable.

TEDET123 said:
LG Support tool was unable to detect my phone..
Click to expand...
Click to collapse
Wait so what can you do? Hard reset? Download mode? Nothing?
Can you plug your phone and check that your phone is not detected in device manager?
All the drivers are installed?

Same issue
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!

I would try to force the phone into qhsusb mode then flash only laf.img,aboot.img and boot.img
In qhsub mode you should be able to see the SDB partition
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
FaseehUllah said:
I am having the same exact issue as TEDET123. !!! installed ubunto in one of my PC, tried the same procedure as explain at
http://forum.xda-developers.com/showthread.php?t=2582142&highlight=even+disconnect+lg+phone.
the ubuntu doesn't show any SDB !! need help!!! went to the famous lg software guy in my town. He said MMC chip needs to be replaced ! I knw he doesn;'t have its solution and trying to demotivate me thats it! I knw there must be a solution to this issue!
Click to expand...
Click to collapse

Same problem.

Same problem
now can i go back to fast boot mode?

someone please help..

Same problem, please helpp

Same Problem ...... flashing unknown rom and now stuck on LG logo and not entering to download mode please help !! Experts ??

Xperia E4 Dual bootloop

Hello, I've tried posting my problem elsewhere on xda without response so I'll give it a try in here. My phone shows the sony logo then reboots infinitely after rooting it and I searched everywhere for a solution but all I could do is get this message on flashtool:
06/056/2015 17:56:00 - INFO - Loader : S1_Root_2f8b - Version : MT6582_15 / Boot version : S1_Boot_MT6582_TC9SP_11 / Bootloader status : ROOTED
06/056/2015 17:56:00 - INFO - Transfer buffer size : 262144
06/056/2015 17:56:01 - INFO - You must have the according fsc script to flash this device.
06/056/2015 17:56:01 - INFO - Flashing finished.
06/056/2015 17:56:01 - INFO - Please unplug and start your phone
06/056/2015 17:56:01 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
It should be a driver problem but I have already installed adb drivers, specific drivers for e4 from sony website and flashtool, fastboot and jdm drivers from flashtool. I also tried switching usb ports and trying on other computers with the same results, and I'm 100% sure unknown sources and debug mode were checked last time the phone was in working condition.
I tried installing all drivers from flashtool's driver folder as well, still nothing. I dunno if it's relevant but the device is recognized as somc flash device in device manager. I'm using flashtool 0.9.19.0 as I read somewhere it works better for the e4 dual (even if it doesn't for me) and the latest version gives an IO exception error.
Any expert who can help me with the problem?
Edit: Bootloader is unlocked but the problem was the same before unlocking

Is there really no way of fixing my phone? Please help. . .

Anyone?

Can someone enlighten me? Now the battery is dead too... phone won't charge anymore.

ZeroJoe said:
Can someone enlighten me? Now the battery is dead too... phone won't charge anymore.
Click to expand...
Click to collapse
too bad i didn't see this thread previously.
hello friend,
I too have the same problem now.
i tried to change the build .prop and ended in bootloop today.
i have a similar message
"16/028/2015 15:28:57 - INFO - Please connect your device into flashmode.
16/029/2015 15:29:08 - INFO - Device disconnected
16/029/2015 15:29:13 - INFO - Bootloader unlock canceled
16/029/2015 15:29:50 - INFO - Device connected with USB debugging off
16/029/2015 15:29:50 - INFO - For 2011 devices line, be sure you are not in MTP mode"
I tried to change the usb debugging settings through adb ,it is not working.
the internal storage and sdcard are not mounting. :crying::crying:
I think we will have to get help from sony support and the thread Xperia E4 Development by LeonXperiaXC
Did you try out the sony pc companion ? it is supposed to work as my device has a locked boot loader . but it is not working either.

dushandiaz said:
Did you try out the sony pc companion? it is supposed to work as my device has a locked boot loader . but it is not working either.
Click to expand...
Click to collapse
Yes I did that, device not supported, and that was even before I unlocked the bootloader.
I gave up fixing it some days ago, seeing that neither sony nor xda helped, and I can't afford a new one for now. Please let me know if you do manage to fix it, as I will check here from time to time, good luck to you.

ZeroJoe said:
Yes I did that, device not supported, and that was even before I unlocked the bootloader.
I gave up fixing it some days ago, seeing that neither sony nor xda helped, and I can't afford a new one for now. Please let me know if you do manage to fix it, as I will check here from time to time, good luck to you.
Click to expand...
Click to collapse
As i couldn't fix the device,I gave the phone to the service center.they had fixed it .I will be getting the device on moday. :fingers-crossed:
By the way,i found some interesting fact why unbricking didn't work for our E4.
sony pc companion unbricked my previous device xperia E1,it is a snapdragon device.
I think mediatek devices can't be unbricked by sony pc companion and also flashtool by androxyde.
Xperia C cannot be unbricked by the both as well.it is a mtk 6589 device.
Xperia C has an unbrick method using a tool/software called WMshua perfect flash.
https://www.informationlord.com/ultimate-guide-to-fix-bricked-xperia-c/
I didn't try it because i was scared of hard bricking the device.
I think it might work.
plus for chinease mediatek devices there is another tool called spflashtool.
also learn to use the spflashtool .there is a begineers guide at mtkroms.com
http://www.mtkroms.com/2015/02/how-...howComment=1447795342637#c6494565355265496004
give it a try.
If you have warranty definitely get it repaired by the service center.
or try the above methods if you have no choice.
I hope you will get your device working as soon as possible. :good::good::good::fingers-crossed::fingers-crossed::fingers-crossed:
Good luck.

ZeroJoe said:
Is there really no way of fixing my phone? Please help. . .
Click to expand...
Click to collapse
Did you try to restore with pc companion
1.Open back case and found OFF lockup using pen shutdown the bootloop
2.Open pc companion then support zone
3.click update my phone
4.click restore phone/tablet
5.then choose Sony Xperia E4 dual (E2115) because i connected
or if you not connected preess other phone/tablet then Choose E2115
6.after downloading firmware and getting ready
7.Make sure you have 80 % of charge
8.Start you phone in Flashmode PWR+VOL-
9.Wait
10.prrrrooooffffiiiiiitttt!!!!!!
AND NOTE SP FLASH TOOL NEVER FLASH SONY XPERIA WITH MTK EXPECT FAKES

Hi! I have sony xperia e4 E2105 and yesterday it went into bootloop. I tried to flash stock firmware but the version I have doesn't see the tft file so I downloaded older version of flashtool and it recogniznes tft file but when I try to flash it says that it can't open bundle . I dont have custom recovery .Please help me!
Thank you

Blu Studio C Hd s090q stuck on logo screen

Hello everyone.
I have a Blu Studio C HD s090q stuck on logo screen forever.
I have downloaded this room here http://www.mediafire.com/download/d9bdr1dbw4qk9ic/BLU_S090Q_V07_REPAIR.rar
and SP Flashtool v5.1428.00 and MTK USB drivers which I have installed and restarted computer after that.
Followed this tutorial here: http://www.blogtechtips.com/2015/03...phone-flash-tool-to-flash-any-blu-smartphone/
The thing is after I click "Download" button of SP flashtool and then connect my device (without battery as suggested on tutorial) and press vol up, nothing happens.
What should I do? Could somebody give me a little help? I have bought this phone just 3 weeks ago.
Thanks in advance.
Edit: I just figured out what was wrong after many and many tries and I would like to share in case somebody have a issue like mine.
First off, I had to download and installSP Flashtool ver 5.1628 and MKT USB Drivers and I also installed MT65xx Preloader Auto-Driver.
After I installed all these, I had to manually install "MediaTek DA USB VCOM (Android)" driver to my computer, then as I had bricked my phone by replacing KingRoot for SuperSU, while following previous tutorials, instead of choosing option "Format All + Download" (which wasn't working at all in my case), I picked the option called "Firmware update". Hit Download > while pressing vol + button, plugged usb cord / cable > SP Flashtool started downloading and I released vol+ button.
That's it! If somebody have any doubt, feel free to contact me.

Hello! I have exactly the problem you had your . My BLU C HD s090Q has been brick . I can not even enter the stock recovery . I can not do anything. And I followed the footsteps of your solution, but it still gives me trouble flashing . I'm desperate friend! Let's talk please , and help me to relive the cell .

Ramón Mejía said:
Hello! I have exactly the problem you had your . My BLU C HD s090Q has been brick . I can not even enter the stock recovery . I can not do anything. And I followed the footsteps of your solution, but it still gives me trouble flashing . I'm desperate friend! Let's talk please , and help me to relive the cell .
Click to expand...
Click to collapse
Did you installed MTK drivers?
In some cases you have to install it manually to your computer.
Try this tutorial here:
https://www.drivereasy.com/how-to-manually-install-a-driver-in-your-computer/
Best regards,
Cristy.

Hi friend! I have a doubt: How can I root this phone? I have the same model as you but I can't find any guide for root this device, and how to flash a custom recovery and a custom rom (like cyanogenmod 13 marshmallow) neither... Can you help me please? Thank you all.

Hi! I thing that is possible port this http://forum.xda-developers.com/hot-2/orig-development/official-twrp-infinix-hot-2-t3394989 For our device (is the same MTK) what do you thing?

same problem, stuck on blu logo, and i cant format the phone
I think is EMMC Problem!!!

luis.manresa14 said:
same problem, stuck on blu logo, and i cant format the phone
I think is EMMC Problem!!!
Click to expand...
Click to collapse
Don't format the phone. Try the FIRMWARE UPGRADE option!

I have a phone blu studio c hd that stopped working after I downloaded a new ROM and after the download finished the phone completely stopped and did not charge or read the charger plz help me

granado0 said:
I have a phone blu studio c hd that stopped working after I downloaded a new ROM and after the download finished the phone completely stopped and did not charge or read the charger plz help me
Click to expand...
Click to collapse
There are several different BLU Studio C HD models. What is the MODEL NUMBER of your device? And what is the specific complete name of the ROM that you flashed?
Sounds like you flashed the wrong ROM.
Sent from my Nexus 7 using XDA Free mobile app

What i do im download rom firmware stok rom
And what do I do the phone does not give any sign of life ROM that you downloaded is Ron Genuine but not from the company's site because the company's site does not contain any support for the phone

granado0 said:
And what do I do the phone does not give any sign of life ROM that you downloaded is Ron Genuine but not from the company's site because the company's site does not contain any support for the phone
Click to expand...
Click to collapse
You had a custom recovery on your phone? How exactly did you "download" the custom ROM to your device? You installed it from a zip using the custom recovery? Please explain.
Also what is the EXACT FILE NAME of the ROM you downloaded. Ron Genuine is not something I'm familiar with. Please answer the question I asked you. Without the exact file name, I cannot help you.
Sent from my 5056D using XDA Free mobile app

Hello Friend, I hope that even in these days I can respond. I have a problem with my Android ROM BLU Q S090Q / Android 6.0. I installed the ROM and everything perfect, I solved the Bricked of the phone using the MTK Droid Tools 2.5.3, the problem is that I could not rootearlo with any program (KingRoot, OneclicRoot, etc.) to be able to change the IMEI that I have it with another number and does not activate the Android's antenna. The Recovery of this Terminal is the original that brings the ROM that was installed, my question is: Will you install the TWRP you mention here and then load the SuperSU Binary 'to Rootearlo? What method can I use to robe my terminal? :silly:
I also read something on the Net about an Android ROM Nougat on BLU Studio G2 (Android 7.1.1 / CM14.1), is this true or is it a Fake?
Posd. I can not change the IMEI with the option "Engineer Mode" because in the terminal, the line inside the menu "CDS information" does not exist or is hidden, the other programs to activate it are NOT installed or blocked with an error message, I leave some captures to give you an idea.
"java.io.FileNotFoundExceptiion:/dev/pttycmd1: open failed: EACCES (Permission denied)/dev/pttycmd1: open failed: EACCES (Permission denied)"
NOT Root Imposible!: http://prntscr.com/gi9ez3
Captured ERROR: https://prntscr.com/gisw4u
No Line CDS informations: https://prntscr.com/gitbd8
Thk...

Le1s BootLoop

The device is on a bootloop and cannot be powered off until the battery dies. After Leeco splash screen something shows up in Chinese and again this continues (as shown in images).
Unable to access recovery.
What can I do?
Please help.

[email protected] said:
The device is on a bootloop and cannot be powered off until the battery dies. After Leeco splash screen something shows up in Chinese and again this continues (as shown in images).
Unable to access recovery.
What can I do?
Please help.
Click to expand...
Click to collapse
Use sp flesh tool
If u know fast boot process then install twrp recovery
Above both solution available on you tube

sumitgp said:
Use sp flesh tool
If u know fast boot process then install twrp recovery
Above both solution available on you tube
Click to expand...
Click to collapse
Ok...will give it a try.
Thanks.

sumitgp said:
Use sp flesh tool
If u know fast boot process then install twrp recovery
Above both solution available on you tube
Click to expand...
Click to collapse
SP Flash Tool detected my device and it freezed for a long time on "Downloading DA 100%" and it crashed.
Now my device does not even show charging.
Only sign of life is a Red Notification Light when connecting Charger or USB.
Is there anything I can do?

Also..SP Flash Tool no longer recognises my device.
Windows Device Manager shows it as Android MTK Device.

[email protected] said:
Also..SP Flash Tool no longer recognises my device.
Windows Device Manager shows it as Android MTK Device.
Click to expand...
Click to collapse
https://forum.xda-developers.com/leeco-le-1s/development/index-leeco-le-1s-roms-kernels-t3621748

sumitgp said:
https://forum.xda-developers.com/leeco-le-1s/development/index-leeco-le-1s-roms-kernels-t3621748
Click to expand...
Click to collapse
That link opens a thread containing Le1s roms.
What am I supposed to do with that.
I already have stock rom. But the problem is SP flash tool not detecting my phone.

[email protected] said:
That link opens a thread containing Le1s roms.
What am I supposed to do with that.
I already have stock rom. But the problem is SP flash tool not detecting my phone.
Click to expand...
Click to collapse
U can find in that trend telegram group they help u just join telegram le 1s helping GRP
They can assist u via team viewer
For sp flesh tool help

urgent help lenovo k4 note complete brick

My lenovo k4 note totally dead after installing RR-N-v5.8.5-20180105-k5fpr-Final and Zero and while tried to install TWRP using MarshMallow method my device is dead can't boot , no bootloader ,no recovery ,not even vibrate , and not detecting
can' t connect to pc when
trying to use SP flash tool to recover it,can' detect by flash tool
tried to flash with flash tools ver. 5.1524 but not detecting by pc and shows this error always when try to connect pc with flash tool
please see image : https: // goo . gl / bjndc5

kagadhvi said:
My lenovo k4 note totally dead after installing RR-N-v5.8.5-20180105-k5fpr-Final and Zero and while tried to install TWRP using MarshMallow method my device is dead can't boot , no bootloader ,no recovery ,not even vibrate , and not detecting
can' t connect to pc when
trying to use SP flash tool to recover it,can' detect by flash tool
tried to flash with flash tools ver. 5.1524 but not detecting by pc and shows this error always when try to connect pc with flash tool
please see image : https: // goo . gl / bjndc5
Click to expand...
Click to collapse
My best advice would be to consult to the service center... As far as I know, in your current phone condition, there's nothing that we can do... Even if the service center would cost not little, they would surely know what to do

CandyCone said:
My best advice would be to consult to the service center... As far as I know, in your current phone condition, there's nothing that we can do... Even if the service center would cost not little, they would surely know what to do
Click to expand...
Click to collapse
i did it bro
it took sometime but finally i completed solve k4 note issue
figured out

kagadhvi said:
i did it bro
it took sometime but finally i completed solve k4 note issue
figured out
Click to expand...
Click to collapse
Can you please share the process how to solve dead lenovo k4 note issue? My phone is completely dead, service center people also couldn't do anything, please help me.

gpnth22 said:
Can you please share the process how to solve dead lenovo k4 note issue? My phone is completely dead, service center people also couldn't do anything, please help me.
Click to expand...
Click to collapse
download latest flash tools
download stock rom version marsmallow (you'll find it on foru xda)
than flash it with latest flash tools
done.

kagadhvi said:
download latest flash tools
download stock rom version marsmallow (you'll find it on foru xda)
than flash it with latest flash tools
done.
Click to expand...
Click to collapse
I tried flashing stock rom with SP flash tool but my device is not detecting, all drivers are installed properly tried by pressing volume keys & power button also but still not detecting, please give me a solution.