Hello, I've tried posting my problem elsewhere on xda without response so I'll give it a try in here. My phone shows the sony logo then reboots infinitely after rooting it and I searched everywhere for a solution but all I could do is get this message on flashtool:
06/056/2015 17:56:00 - INFO - Loader : S1_Root_2f8b - Version : MT6582_15 / Boot version : S1_Boot_MT6582_TC9SP_11 / Bootloader status : ROOTED
06/056/2015 17:56:00 - INFO - Transfer buffer size : 262144
06/056/2015 17:56:01 - INFO - You must have the according fsc script to flash this device.
06/056/2015 17:56:01 - INFO - Flashing finished.
06/056/2015 17:56:01 - INFO - Please unplug and start your phone
06/056/2015 17:56:01 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
It should be a driver problem but I have already installed adb drivers, specific drivers for e4 from sony website and flashtool, fastboot and jdm drivers from flashtool. I also tried switching usb ports and trying on other computers with the same results, and I'm 100% sure unknown sources and debug mode were checked last time the phone was in working condition.
I tried installing all drivers from flashtool's driver folder as well, still nothing. I dunno if it's relevant but the device is recognized as somc flash device in device manager. I'm using flashtool 0.9.19.0 as I read somewhere it works better for the e4 dual (even if it doesn't for me) and the latest version gives an IO exception error.
Any expert who can help me with the problem?
Edit: Bootloader is unlocked but the problem was the same before unlocking
Is there really no way of fixing my phone? Please help. . .
Anyone?
Can someone enlighten me? Now the battery is dead too... phone won't charge anymore.
ZeroJoe said:
Can someone enlighten me? Now the battery is dead too... phone won't charge anymore.
Click to expand...
Click to collapse
too bad i didn't see this thread previously.
hello friend,
I too have the same problem now.
i tried to change the build .prop and ended in bootloop today.
i have a similar message
"16/028/2015 15:28:57 - INFO - Please connect your device into flashmode.
16/029/2015 15:29:08 - INFO - Device disconnected
16/029/2015 15:29:13 - INFO - Bootloader unlock canceled
16/029/2015 15:29:50 - INFO - Device connected with USB debugging off
16/029/2015 15:29:50 - INFO - For 2011 devices line, be sure you are not in MTP mode"
I tried to change the usb debugging settings through adb ,it is not working.
the internal storage and sdcard are not mounting. :crying::crying:
I think we will have to get help from sony support and the thread Xperia E4 Development by LeonXperiaXC
Did you try out the sony pc companion ? it is supposed to work as my device has a locked boot loader . but it is not working either.
dushandiaz said:
Did you try out the sony pc companion? it is supposed to work as my device has a locked boot loader . but it is not working either.
Click to expand...
Click to collapse
Yes I did that, device not supported, and that was even before I unlocked the bootloader.
I gave up fixing it some days ago, seeing that neither sony nor xda helped, and I can't afford a new one for now. Please let me know if you do manage to fix it, as I will check here from time to time, good luck to you.
ZeroJoe said:
Yes I did that, device not supported, and that was even before I unlocked the bootloader.
I gave up fixing it some days ago, seeing that neither sony nor xda helped, and I can't afford a new one for now. Please let me know if you do manage to fix it, as I will check here from time to time, good luck to you.
Click to expand...
Click to collapse
As i couldn't fix the device,I gave the phone to the service center.they had fixed it .I will be getting the device on moday. :fingers-crossed:
By the way,i found some interesting fact why unbricking didn't work for our E4.
sony pc companion unbricked my previous device xperia E1,it is a snapdragon device.
I think mediatek devices can't be unbricked by sony pc companion and also flashtool by androxyde.
Xperia C cannot be unbricked by the both as well.it is a mtk 6589 device.
Xperia C has an unbrick method using a tool/software called WMshua perfect flash.
https://www.informationlord.com/ultimate-guide-to-fix-bricked-xperia-c/
I didn't try it because i was scared of hard bricking the device.
I think it might work.
plus for chinease mediatek devices there is another tool called spflashtool.
also learn to use the spflashtool .there is a begineers guide at mtkroms.com
http://www.mtkroms.com/2015/02/how-...howComment=1447795342637#c6494565355265496004
give it a try.
If you have warranty definitely get it repaired by the service center.
or try the above methods if you have no choice.
I hope you will get your device working as soon as possible. :good::good::good::fingers-crossed::fingers-crossed::fingers-crossed:
Good luck.
ZeroJoe said:
Is there really no way of fixing my phone? Please help. . .
Click to expand...
Click to collapse
Did you try to restore with pc companion
1.Open back case and found OFF lockup using pen shutdown the bootloop
2.Open pc companion then support zone
3.click update my phone
4.click restore phone/tablet
5.then choose Sony Xperia E4 dual (E2115) because i connected
or if you not connected preess other phone/tablet then Choose E2115
6.after downloading firmware and getting ready
7.Make sure you have 80 % of charge
8.Start you phone in Flashmode PWR+VOL-
9.Wait
10.prrrrooooffffiiiiiitttt!!!!!!
AND NOTE SP FLASH TOOL NEVER FLASH SONY XPERIA WITH MTK EXPECT FAKES
Hi! I have sony xperia e4 E2105 and yesterday it went into bootloop. I tried to flash stock firmware but the version I have doesn't see the tft file so I downloaded older version of flashtool and it recogniznes tft file but when I try to flash it says that it can't open bundle . I dont have custom recovery .Please help me!
Thank you
Related
How do i rescue my bricked phone!
Click to expand...
Click to collapse
well the answer lies within this thread.
how do you brick a phone
well, there are many ways you can brick a phone.1. you install the wrong software
2.you install a 'broken' rom
3. you install a recovery that isnt supported for our phone
4.or you were messing with your bootloader
etc etc... you get the point
how to rescue a bricked x81st: If you have done a soft brick then you can boot into xrecovery and restore your latest backup. easy
2:if restoring doesn'twork or you have a hard brick then you should either launch:SEUS (sony ericsson update service) or pc companion. click update and follow the steps.
3:if none of that works then you will have to send it off to se. if you dont get some kind of phone company to fix it then its as useless as a real brick lol or a replica of a phone.
3:you can use a flashtool to fix it as well. if you open flashtool you usally get a number of options such as unlock bootloader etc. there should be an option where you can restore it. (lol i think)
Cheersi hope it helped. if it did then please do press the thanks button.
-wilbso
Soft Brick is the common brick we get.
Hard Brick is a brick you can only get with messing with the bootloader. There's no complete brick.
Say something about flashtool too.
Chris95X8 said:
Soft Brick is the common brick we get.
Hard Brick is a brick you can only get with messing with the bootloader. There's no complete brick.
Say something about flashtool too.
Click to expand...
Click to collapse
ok. besides the complete brick is what i call doomsday. thats just my own little thing lol. and yes i will metion 'bout' the flashtool too
how about hard brick??
X8
I bricked my phone while a opened bootloader.Phone was not recognized SIM and i havent data connection too.SE PC repair does not helped me,backup file as well.Only helpful tool was S1Tool with "restore" button.It fixes my phone and i opened bootloader again with success!
Thanks for developers!!!
X8;OPENED BOOTLOADER;nAa kernel;DUAL TOUCH;GINGERXPERIA V17 2.3.7
montekristo said:
I bricked my phone while a opened bootloader.Phone was not recognized SIM and i havent data connection too.SE PC repair does not helped me,backup file as well.Only helpful tool was S1Tool with "restore" button.It fixes my phone and i opened bootloader again with success!
Thanks for developers!!!
X8;OPENED BOOTLOADER;nAa kernel;DUAL TOUCH;GINGERXPERIA V17 2.3.7
Click to expand...
Click to collapse
Quite a few people repaired their phones with s1 tool. Iv never actually hard bricked my phone. IV done soft brick> bootloop but I fixed that be restoring a backed in xrecovery so these replies I
Getting are quite helpful. As long as your phone is repaired everything is alright.
sent from my x8 running gingerdx
Hello, can you please help me! I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!! how did you manage o get into flash mode?
benga_mircea said:
I bricked my xperia neo, while trying to update se tweaked rom v 8.5. Now i'm facing the "sony ericsson" screen, totaly blocked. I've tried many times to flash it, whith wotan client, flash tool, but it's imposible to enter flash mode again, no green led, only bocked se screen, please help!!! how did you manage o get into flash mode?
Click to expand...
Click to collapse
On the W/X8 and X10 mini/Pro you can get into FLASH MODE by keeping the back button pressed while connecting the TURNED OFF phone by USB.
That being said, you have a NEO which doesn't work that way.
Your phone has "fastboot" - to get there ... turn off the phone, keep the bottom right key pressed and connect the USB cable to the PC.
What you have to do from there on out is either best asked in the RIGHT subforum or through Google research.
B.Jay said:
On the W/X8 and X10 mini/Pro you can get into FLASH MODE by keeping the back button pressed while connecting the TURNED OFF phone by USB.
That being said, you have a NEO which doesn't work that way.
Your phone has "fastboot" - to get there ... turn off the phone, keep the bottom right key pressed and connect the USB cable to the PC.
What you have to do from there on out is either best asked in the RIGHT subforum or through Google research.
Click to expand...
Click to collapse
how did you get this thread back up?
Sent from my X8 using XDA App
wilbso said:
how did you get this thread back up?
Click to expand...
Click to collapse
Hummm...?
I only replied to benga_mircea's post from today.
Or ... did I miss something? *notsure*
Thank you for your help, but I can't acces flash mode or fastboot mode again, lika I use to, after I connect the batery, push the back button, insert the usb, a few seconds and the "sony ericsson" screen pops up again and stays blocked. I think I've killed my phone
Well, for as long as you see the SONY ERICSSON boot logo - and I'm assuming from the way the X8 works here - the boot loader and kernel are intact; there's just a problem boot-strapping the system ROM (shot system, bad flash).
The real problem is that Fastboot isn't comparable to the Flash Mode of our phones ... it's very different.
In your stead I would try to find out how you can perform a "disaster restore" (like we do with our W/X8 through Flash Mode and Flashtool) by flashing back to stock.
Anyway ... just to repeat it ...
1. You need to TURN OFF your phone and DISCONNECT it from the computer/charger.
2. You insert the USB connector into JUST your phone.
3. You press the bottom/right button (also "Back"?) and keep it pressed while you connect the USB to the computer.
Once the phone connected to the computer as a (wild guess!) "Flash Device" or "Fastboot Device" you need the apropriate tool(s) and Stock ROM image - in case PC Companion refuses to repair your phone.
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Any chance this thread (in the Xperia Neo General section) could be of any help to you?
B.Jay said:
Hummm...?
I only replied to benga_mircea's post from today.
Or ... did I miss something? *notsure*
Click to expand...
Click to collapse
Where did you find it? I mean where did boy find the thread? My Sig? Looking through old posts?
Sent from my X8 using XDA App
B.Jay said:
Well, for as long as you see the SONY ERICSSON boot logo - and I'm assuming from the way the X8 works here - the boot loader and kernel are intact; there's just a problem boot-strapping the system ROM (shot system, bad flash).
The real problem is that Fastboot isn't comparable to the Flash Mode of our phones ... it's very different.
In your stead I would try to find out how you can perform a "disaster restore" (like we do with our W/X8 through Flash Mode and Flashtool) by flashing back to stock.
Anyway ... just to repeat it ...
1. You need to TURN OFF your phone and DISCONNECT it from the computer/charger.
2. You insert the USB connector into JUST your phone.
3. You press the bottom/right button (also "Back"?) and keep it pressed while you connect the USB to the computer.
Once the phone connected to the computer as a (wild guess!) "Flash Device" or "Fastboot Device" you need the apropriate tool(s) and Stock ROM image - in case PC Companion refuses to repair your phone.
---------- Post added at 12:21 PM ---------- Previous post was at 12:18 PM ----------
Any chance this thread (in the Xperia Neo General section) could be of any help to you?
Click to expand...
Click to collapse
Thanks! I tried like 50 times, and nothing, the ennoing "sony ericsson" is booting (no sony ericsson logo as usualy, just the writing) I flashed 10 times in the past whith no problem. Now, even when I put it to charge ( wall charge) the phone is turning on showing that stupid "sony ericsson" writting, I cant shut it down from the on\off button. Before killling it, I've instales stock MT15i_4.0.A.2.368_GLOBAL ROM, then I upgraded to MT15i_4.0.2.A.0.42_Global, then rooted with DooMLoRD_v4_ROOT-zergRush-busybox-su, Installed CWM( wiped cache, updated SE tweaked v8.5 Rom) After the restart, the "se" writting started booting. I've pulled out the batery, and begined flashing it with flash tool(no green led).The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story! I've tried like 100 times with wotan, flash tool and FlashTool_0.2.9.1_FOTAUnbrick, no result, even if pc companion tells me "phone conected" and gives me further instructions whith the phone being dead, and the flash tool showing me to connect de device... Thank you for all the help, hope there is a solution. sorry for the long post and my bad english...
---------- Post added at 11:43 PM ---------- Previous post was at 11:24 PM ----------
04/040/2012 23:40:02 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:04 - INFO - Device disconnected
04/040/2012 23:40:06 - INFO - Device connected with USB debugging off
04/040/2012 23:40:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:07 - INFO - Device disconnected
04/040/2012 23:40:10 - INFO - Device connected with USB debugging off
04/040/2012 23:40:10 - INFO - For 2011 devices line, be sure you are not in MTP mode
04/040/2012 23:40:18 - INFO - Device disconnected
04/040/2012 23:40:35 - INFO - Device connected with USB debugging off
04/040/2012 23:40:35 - INFO - For 2011 devices line, be sure you are not in MTP mode
Flash tooll results when trying to connect (pulling batery-10 secs, back butoon, usb cable)
benga_mircea said:
The flashing started and my little brother accidentaly pulled out the Usb cable; that's the whole story!
Click to expand...
Click to collapse
Whoa... that's what I call a "security vulnerability".
If the flash process got interrupted because your lil bro pulled the USB cable I'm somewhat certain the NAND is messed up pretty good - no wonder you're stuck at the SE boot logo.
If there's no way by which you can get the device back to normal (read: even the guys over in the Neo sub-board are out of ideas/help) I think your best shot would be to send it in to SE for repair if you still got warranty. SE should have other means to resurrect the device and slap it back into shape.
I'm sorry I can't really help you here with this - the Neo is different from the X8 and also different from the way my tablets work.
Thank's for the advice! My waranty is lost, i've unlocked the bootloader. Only if I could enter in flash mode!
benga_mircea said:
Thank's for the advice! My waranty is lost, i've unlocked the bootloader. Only if I could enter in flash mode!
Click to expand...
Click to collapse
Well, on my Samsung, which has Fastboot, I first enter Fastboot and from there I put the device into download mode for flashing (in theory you can compare "Download mode" to the "Flash mode" - in Flash mode the W/X8 awaits a ROM image to be flashed into the NAND, pretty much the same as "Download mode" works).
Since your Neo isn't completely dead (you just have a shot system due to the flash interruption) you only need to find a way how you can re-write the system.
I lack the time to research how the Neo works, but I think there should be a way to get the device going as you can even "resurrect" a W/X8 where you formatted the system partition (by mistake in CWM, for example). However, that's not as bad as interrupting the USB connection but about the same "ooops" to blank the system.
Flash mode not working, fastboot not workingI Tried a lot of programs (wotan, flash tool, fota unbrick tool, octopus, omnius for se, pc companion, se update. Non of them manages to connect to my phone. If only I could connect for 1 sec. I have a backup of TA, but I can flash it. Thanks anyway!
is it safe to unlock BL, if we have x8 with manuf.code 11W28? pls help me
NarutoDroid said:
is it safe to unlock BL, if we have x8 with manuf.code 11W28? pls help me
Click to expand...
Click to collapse
yes 11W30 or below should unlock fine but for me 11W33 also no problem
Sent from my E15i using xda premium
Hello,
I am so confused I changed out my xperia play motherboard out due to the lack of touch functionality on two different digitizers. The screen worked fine along with everything except usb data transfer and touch functionality. So I changed the motherboard and confirmed that all ribbons are in locked into place and now no boot logo/ android logo at boot up. The unit vibrates like normal on boot up but no picture on the lcd. The LCD ribbons are plugged in to the motherboard properly. I tired a replacement motherboard and the original with issues and the same situation on both now. Can someone please help. I know this is not a software issue since it was fine prior to switching the motherboards.
devonthedude said:
Hello,
I am so confused I changed out my xperia play motherboard out due to the lack of touch functionality on two different digitizers. The screen worked fine along with everything except usb data transfer and touch functionality. So I changed the motherboard and confirmed that all ribbons are in locked into place and now no boot logo/ android logo at boot up. The unit vibrates like normal on boot up but no picture on the lcd. The LCD ribbons are plugged in to the motherboard properly. I tired a replacement motherboard and the original with issues and the same situation on both now. Can someone please help. I know this is not a software issue since it was fine prior to switching the motherboards.
Click to expand...
Click to collapse
Well if its a new motherboard its most likely a software issue..... Where do you expect the motherboard to get the software from? try flashing a ftf file or something because it sounds like a software issue to me
How can I flash with out access to the android os?
aaron187 said:
Well if its a new motherboard its most likely a software issue..... Where do you expect the motherboard to get the software from? try flashing a ftf file or something because it sounds like a software issue to me
Click to expand...
Click to collapse
The problem is that both motherboards are now doing the same issue, how can I flash if I cant even get my computer to recognize the usb plugged in. The unit charges via usb but wont do data transfer at all. Is there something I'm missing here on the flash that you are referring to. I have flashed both a G1 and a Thunderbolt so I have familiarity doing it but not on a phone that cant access the android os. That Sony software everyone says corrects software issues wont even see my xperia play.
Go to the xplay dev section and one of the pinned threads, flash tool has fast boot and flashing drivers. Dl flash tool and upon install there'll be a drivers-install.exe in the folder you installed it and run it.
Sent from my Xperia Play
cant get into MSc mode to flash
cj360 said:
Go to the xplay dev section and one of the pinned threads, flash tool has fast boot and flashing drivers. Dl flash tool and upon install there'll be a drivers-install.exe in the folder you installed it and run it.
Sent from my Xperia Play
Click to expand...
Click to collapse
The problem is that I CAN NOT get into MSC mode since the unit will not go into the android OS. Is there something I'm missing here, the flash tool wont connect since I can not get into msc mode.
No boot logo help!
aaron187 said:
Well if its a new motherboard its most likely a software issue..... Where do you expect the motherboard to get the software from? try flashing a ftf file or something because it sounds like a software issue to me
Click to expand...
Click to collapse
It is not a new motherboard but one pulled from a working unit. Both motherboards (my original working one and the replacement) are having the same issue now, no boot logo at all just vibrate at startup. How is this a software issue when the android os has not been flashed nor deleted off my original working motherboard (the android os is not saved to sd). Is there something I'm missing, I'm so confused. I cant get into MSC mode since the andriod os does not boot, so I dont see how flashing will help.
how to enable mtp mode
cj360 said:
Go to the xplay dev section and one of the pinned threads, flash tool has fast boot and flashing drivers. Dl flash tool and upon install there'll be a drivers-install.exe in the folder you installed it and run it.
Sent from my Xperia Play
Click to expand...
Click to collapse
Ok the tool does recognize my phone but how do I switch to MTP mode from MSC mode with out going into the android operating system since it wont boot. according to the flashtool program
26/020/2012 21:20:22 - INFO - Device connected with USB debugging off
26/020/2012 21:20:22 - INFO - For 2011 devices line, be sure you are not in MTP mode
I know i sound like a noob on this but I never ran into problems like this with my G1 or thunderbolt.
Try to go into flash mode and flash ftf through Flashtool. You have guides in pinned topics. As far as I remember it was in development section.
Tapped with Xperia Play running AOKP 4.0.4 Milestone 6
flash tool only errors out on my xperia play
olokos said:
Try to go into flash mode and flash ftf through Flashtool. You have guides in pinned topics. As far as I remember it was in development section.
Tapped with Xperia Play running AOKP 4.0.4 Milestone 6
Click to expand...
Click to collapse
Ok, I got there but here is what flashtool says:
26/049/2012 21:49:36 - INFO - Selected X10_V1_BLRelock.ftf
26/049/2012 21:49:36 - INFO - Preparing files for flashing
26/049/2012 21:49:36 - INFO - Please connect your device into flashmode.
26/049/2012 21:49:37 - INFO - Opening device for R/W
26/049/2012 21:49:37 - INFO - Reading device information
26/049/2012 21:49:42 - INFO - Start Flashing
26/049/2012 21:49:42 - INFO - Flashing loader
26/049/2012 21:49:42 - INFO - Ending flash session
26/049/2012 21:49:42 - ERROR -
26/049/2012 21:49:42 - ERROR - Error flashing. Aborted
26/049/2012 21:49:42 - INFO - Device disconnected
Why wont it flash all I get is error messages? as you can see by the log.
Flashed but won't do anything from there
Ok finally l finally flashed the 2.3 rom but the unit says restarting but nothing happens. If i restart the XP still no boot logo like before even though flash tool says its rootable and it has been flashed, here is the log:
26/023/2012 22:23:44 - INFO - Device connected with USB debugging off
26/023/2012 22:23:44 - INFO - For 2011 devices line, be sure you are not in MTP mode
26/024/2012 22:24:07 - INFO - Device disconnected
26/024/2012 22:24:15 - INFO - Selected R800x_FullStocknosimlockta_Verizon.ftf
26/024/2012 22:24:15 - INFO - Preparing files for flashing
26/024/2012 22:24:16 - INFO - Please connect your device into flashmode.
26/024/2012 22:24:40 - INFO - Device connected in flash mode
26/024/2012 22:24:40 - INFO - Opening device for R/W
26/024/2012 22:24:40 - INFO - Reading device information
26/024/2012 22:24:40 - INFO - Phone ready for flashmode operations.
26/024/2012 22:24:41 - INFO - Start Flashing
26/024/2012 22:24:41 - INFO - Flashing loader
26/024/2012 22:24:43 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE
26/024/2012 22:24:43 - INFO - Flashing kernel.sin
26/024/2012 22:24:46 - INFO - Flashing fota0.sin
26/024/2012 22:24:46 - INFO - Flashing fota1.sin
26/024/2012 22:24:47 - INFO - Flashing adsp.sin
26/024/2012 22:24:50 - INFO - Flashing amss_fs.sin
26/024/2012 22:24:50 - INFO - Flashing amss.sin
26/025/2012 22:25:01 - INFO - Flashing apps_log.sin
26/025/2012 22:25:01 - INFO - Flashing system.sin
26/026/2012 22:26:45 - INFO - Flashing userdata.sin
26/026/2012 22:26:47 - INFO - Flashing cache.sin
26/026/2012 22:26:48 - INFO - Ending flash session
26/026/2012 22:26:48 - INFO - Flashing finished.
26/026/2012 22:26:48 - INFO - Please wait. Phone will reboot
26/026/2012 22:26:48 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
any pointers from here is there something i'm missing from this step to get it at least running android, I cant enable 3rd party apps nor debugging since I cant get into the android os
If I'm right then your phone will work now with no issues just flash kernel for Android 2.3 from the same section using fastboot.
Look after .img file.
Tapped with Xperia Play running AOKP 4.0.4 Milestone 6
Sorry to necrobump this thread, but I am having a similar problem. I recently replaced the LCD Flex Cable, but now the screen won't display anything. It can turn on, but nothing is shown. I can't even connect the USB so I can at try to access Flashboot/Flashmode to reflash another baseband and kernel.
Can anyone please help? Anything is appreciated.
Hi fellas,
I'm trying to flash my mt6573 device because of some mistake i made and my phone is now in a bootloop. I am using Sp flash tool but it gives me the [BROM] Can not pass bootrom start command via usb cable. Does this mean i have to use another cable like serial to usb?. I have attached a screenshot so you can see the details
Thanks
erghi said:
Hi fellas,
I'm trying to flash my mt6573 device because of some mistake i made and my phone is now in a bootloop. I am using Sp flash tool but it gives me the [BROM] Can not pass bootrom start command via usb cable. Does this mean i have to use another cable like serial to usb?. I have attached a screenshot so you can see the details
Thanks
Click to expand...
Click to collapse
I have the same problem with my mtk6575 device. It won't open after the android image.
Did you solve your problem?
hkoner said:
I have the same problem with my mtk6575 device. It won't open after the android image.
Did you solve your problem?
Click to expand...
Click to collapse
Is your phone carrier locked?
uhmm.. no help for recovering MTK devices, too..
hkoner said:
I have the same problem with my mtk6575 device. It won't open after the android image.
Did you solve your problem?
Click to expand...
Click to collapse
Yesterday i faced that error but not find any solution for my non-removable battery android, so waited for next day now able to flash with no errors...I think battery made that error so let it be fully empty then charge again and follow flash procedure( for non removable )
i will try it on MT6757D
no bootloop but that error :crying:
hello boss good morning. i have a big problem regarding this flash tool, i tried many version of flash tool but it will result into nothing. first, i used flash tool version SP_Flash_Tool_v5.1728 and the with MT6589 then the message box says :" platform MT6589 not support on this version. please update to latest flashtool and try again. den i tried the latest version and it says "Please use flashtool version v.51728 to handle old platform MT6589. is there anyone can help me in this problem? i already tried many flash tools but it fails..
thanks Boss
Hi all,
Regulary we can see here and here some bricked devices after firmware flashing.
It can be interesting to know the origin of the problem, that's why I propose to you to post here some informations
about the brick context.
Can you reply in this format:
-model (F31xx)
-revision (printed on the box)
-bootloader status (locked or not)
-firmware before brick (include customization)
-root status
-firmware flashed (include customization)
-software used to flash and version
-for users who used Flashtool, you manually exclued TA partitions or used FSC file.
-other revelant informations
Please keep this thread clean of off-topic comments and don't ask how to fix.
I hope it will reveals the problem and help to fix it.
-Model (F3111)
-Revision (Rev2)
-Bootloader status (locked)
-Firmware before brick (EE 6.0)
-Root status unrooted
-Firmware flashed (F3111_33.2.A.3.81_R8A_UK Generic_1302-4476.ftf)
-Software used flashtool-0.9.22.3-windows
-For users who used Flashtool, you manually exclued TA partitions or used FSC file.
-other revelant informations
Flashed to get a nice unbranded firmware and it worked with no problems first time phone was purchased from EE shop i uk £119.99.
I had bricked it by using Flashtool by androxyde
MiModel(F1116)
Rev 4
bootloader status: unlocked by official method of sony then relocked by flashtool
firmware before brick: 33.2.B.3.105
root status: unroot
firmware flashed: 33.2.B.2.35 ( in sin section I had untick BOOTand FOTAKERNEL because of this only my phone bricked)
software used to flash: Sony mobile flasher by androxyde version 0.9.22.3
i had use FSC file
I had download ftf file from Xperifirm then flashed but in sin section I had exclude BOOT and FOTAKERNEL and flash the firmware because of this my phone dead, let me know if their is any method to fix this.
Now phone is not booting into flashmode or fastboot mode by pressing volume +or - keys and by pc in device manager it is detected as unknown device.
rrvuhpg said:
Hi all,
Regulary we can see here and here some bricked devices after firmware flashing.
It can be interesting to know the origin of the problem, that's why I propose to you to post here some informations
about the brick context.
Can you reply in this format:
-model (F31xx)
-revision (printed on the box)
-bootloader status (locked or not)
-firmware before brick (include customization)
-root status
-firmware flashed (include customization)
-software used to flash and version
-for users who used Flashtool, you manually exclued TA partitions or used FSC file.
-other revelant informations
Please keep this thread clean of off-topic comments and don't ask how to fix.
I hope it will reveals the problem and help to fix it.
Click to expand...
Click to collapse
-model F3111
-revision 2
-bootloader status (unlocked)
-firmware after 33.2.A.2.73
-root status YES
-firmware flashed 33.2.A.3.105 (o2)
DEAD.
No fastboot, NO flashmod
No solution for dead sony xperia xa
No solution once you bricked your sony xperia xa. The only one solution is to go for motherboard replaced.
Lasy said:
-model F3111
-revision 2
-bootloader status (unlocked)
-firmware after 33.2.A.2.73
-root status YES
-firmware flashed 33.2.A.3.105 (o2)
DEAD.
No fastboot, NO flashmod
Click to expand...
Click to collapse
Good news now I can fix your dead Xperia Xa
wrundawan said:
Good news now I can fix your dead Xperia Xa
Click to expand...
Click to collapse
The better thing is to explain how to do, you are here to make money or to help people?
I am here for both to earn money and also to help people. Because fixing dead xperia xa is little tricky task which can't be done by beginners it needs some technical knowledge and skills for which I can fix it with very less amount.
Note: This task can't even done by sony service centers they will only tell to replace your motherboard only but I can fix it.
wrundawan said:
I am here for both to earn money and also to help people. Because fixing dead xperia xa is little tricky task which can't be done by beginners it needs some technical knowledge and skills for which I can fix it with very less amount.
Note: This task can't even done by sony service centers they will only tell to replace your motherboard only but I can fix it.
Click to expand...
Click to collapse
OK, but no black magic in your solution, you used this box:
http://4.bp.blogspot.com/-ZQMvd4QJWHU/U-1JDyIuYJI/AAAAAAAAAqY/Mmtip3uj51A/s1600/1.png
It supports our XA and Ultra since v1.0.5.0, you can find it for 130 US$, right?
A beginner can do it, you can find some guide and video on the web on how to use this box.
Anyway thank you for proposing a repair service.
You can't use any box to fix complete dead mobile as it was not detected by them (Except Jtag supported) . I didn't any box for do repair with it. My method is via flash-tool only. I had did some customization in ftf file and also had found correct drivers which make to detect dead xa and xa ulta in flashmode by flashtool so we can flash the ftf file.
I have customized ftf file which make the phone to boot up and enter into both modes flash and fast boot.
---------- Post added at 12:07 PM ---------- Previous post was at 12:06 PM ----------
Currently I don't have any dead xperia xa phone as already I had fixed mine. If I get any sure will make video and post it here.
wrundawan said:
You can't use any box to fix complete dead mobile as it was not detected by them (Except Jtag supported) . I didn't any box for do repair with it. My method is via flash-tool only. I had did some customization in ftf file and also had found correct drivers which make to detect dead xa and xa ulta in flashmode by flashtool so we can flash the ftf file.
I have customized ftf file which make the phone to boot up and enter into both modes flash and fast boot.
---------- Post added at 12:07 PM ---------- Previous post was at 12:06 PM ----------
Currently I don't have any dead xperia xa phone as already I had fixed mine. If I get any sure will make video and post it here.
Click to expand...
Click to collapse
Very good! You solution is even better (and free). I hope that we will have a guide to help users with bricked device.
Just a question, if boxes can't detect the device with their "special features" and drivers and if normally we need Jtag, why a "simple" ftf firmware and drivers can works? Can you technically explain me how it works? I'm not saying that's a fake or something like this but I'm curious and it can help if we want to play with critical parts of the device like preloader or bootloader.
Let me get some dead xa so I can make video about fixing it and also about installing correct drivers to get it detected in flashmode by flashtool.
Currently I don't have any dead XA..
wrundawan said:
Let me get some dead xa so I can make video about fixing it and also about installing correct drivers to get it detected in flashmode by flashtool.
Currently I don't have any dead XA..
Click to expand...
Click to collapse
Maybe you can simply make a writed step by step guide Or you can brick your phone again and make a video, if you want I can explain you how to brick a XA
hard brick f3216
wrundawan said:
Let me get some dead xa so I can make video about fixing it and also about installing correct drivers to get it detected in flashmode by flashtool.
Currently I don't have any dead XA..
Click to expand...
Click to collapse
is this process works on sony xa ultra dual f3216 model...my xa ultra wont get fastboot,flashmode,only red light glow when connecting charger
anyone have a bricked device with red led light can try this method:
1) Run flash tool 0.9.23.2 and do flash firmware regular but don't plug phone to computer.
2) wait for a moment until you see "Wait for flashmode" then hold volume down ( - ) and plug phone to computer. Phone should go to flashmode in this step and process flash firmware.
I have tried 2 times on my device. Only red light at led when connect to charger or computer, on flashmode no fastboot mode, but i did unbricked my device use this method.
PS: You have to run flash tool and do flash firmware before plug phone to computer.
tplsolution said:
anyone have a bricked device with red led light can try this method:
1) Run flash tool 0.9.23.2 and do flash firmware regular but don't plug phone to computer.
2) wait for a moment until you see "Wait for flashmode" then hold volume down ( - ) and plug phone to computer. Phone should go to flashmode in this step and process flash firmware.
I have tried 2 times on my device. Only red light at led when connect to charger or computer, on flashmode no fastboot mode, but i did unbricked my device use this method.
PS: You have to run flash tool and do flash firmware before plug phone to computer.
Click to expand...
Click to collapse
I have also bricked XA1. I know how to flash, I have flashed many sony phones, it doesn't get to to flash mode. It will only show red light. As far as I remember, for flash mode it was green or blue light...
Guys if you have make dead devices doesn't matter any model just feel free to text me in whats app. I can help you out +918147499618
hi @Be6i4 were you able to fix your dead xperia xa1? i have a similar phone bricked by flashtool, showing only red light.
dead xperia xa1 after flashing with flashtool....hope a fix is possible
I tried all methods ( PC / Apk Software ) But phone is unable to root.Also tried with fasboot process but it shores device not found.Kingroot is also not working.Please make a software in which i can root ZUK Z1 .... My device have CYANOGENMOD 12.1-YOG4PAS9IG
.
Please i really need to root.Help me experts.
AkshaySungat001 said:
I tried all methods ( PC / Apk Software ) But phone is unable to root.Also tried with fasboot process but it shores device not found.Kingroot is also not working.Please make a software in which i can root ZUK Z1 .... My device have CYANOGENMOD 12.1-YOG4PAS9IG
.
Please i really need to root.Help me experts.
Click to expand...
Click to collapse
Hello, if your phone cannot be recognized by fastboot you need to turn on oem unlock from dev options and make sure you have the right drivers on your pc and firewall is off.
Try this drivers https://drive.google.com/file/d/0B4Zy8uoEfFKLbDlYS0lOYlJPd2s/view?usp=drivesdk
Or this
https://drive.google.com/file/d/0B4Zy8uoEfFKLSC0wNXhaRVRWWEk/view?usp=drivesdk
The fastboot method works flawlessly :good:
AkshaySungat001 said:
I tried all methods ( PC / Apk Software ) But phone is unable to root.Also tried with fasboot process but it shores device not found.Kingroot is also not working.Please make a software in which i can root ZUK Z1 .... My device have CYANOGENMOD 12.1-YOG4PAS9IG
.
Please i really need to root.Help me experts.
Click to expand...
Click to collapse
Just start your computer with 'Disabled driver signature reinforcement'. Then install adb. I guess, your computer is not taking ADB drivers due to it's signature.. So disable driver signature reinforcement and see if the fastboot method works.
Ps- It's just a "might work"- solution!!