Database Users

[Q] scattering file for yureka cm12

i need scattering file for yureka cm12, i need to flash my yureka, it so urgent, i hard bricked my mobile so cant take scattering file... pls anyone upload the scattering file;;;;;;

sr18 said:
i need scattering file for yureka cm12, i need to flash my yureka, it so urgent, i hard bricked my mobile so cant take scattering file... pls anyone upload the scattering file;;;;;;
Click to expand...
Click to collapse
there is no scatter file for qualcomm devices

abhifx said:
there is no scatter file for qualcomm devices
Click to expand...
Click to collapse
then how can i flash with sp flash tool

You cannot use flash tool..
sr18 said:
then how can i flash with sp flash tool
Click to expand...
Click to collapse
Even I bricked my yureka today when I tried to install custom recovery in fastboot mode. Unfortunately, you cannot use SP flash tool since it is only supported for MTK devices. Our yureka is qualcomm.

darshan.devadiga said:
Even I bricked my yureka today when I tried to install custom recovery in fastboot mode. Unfortunately, you cannot use SP flash tool since it is only supported for MTK devices. Our yureka is qualcomm.
Click to expand...
Click to collapse
so what can i do now to recover my mobile....

sr18 said:
so what can i do now to recover my mobile....
Click to expand...
Click to collapse
I Boss, I am also facing same problem. Even I am not getting fastboot mode in mobile. When I switch on the it is showing only black screen. But when I connected the charger it is showing battery charging animation. Now we need SP Flash tool and Scatter file fro our Yu mobile.
And i have requested the same in YUPLAYGOD. But I didn't received any response from YU end. I received only request numbers. Even toll free number also not working.
Very very bad service. Finally am thinking now we are wasting our money on YU. If any one got the solution please send me on [email protected] or post the same on this site. If I got the solution I will share with you guys..........

my yureka show coloured lines again and again when switch on please help

Lenovo A328 Bricked Not Charging Not Booting

I have this Lenovo A328 which suddenly had multiple and continuous gapps crashes. I tried to do a factory reset but the problem still existed. I decided to flash the stock rom using SP Flash Tool. Flashing the stock rom succeeded but then after, the device does not charge nor boot up. It does not even respond to vol up(or down) + power which brings up a menu for testing the device(not recovery). I tried to format it first before flashing but the result is still the same. I also tried flashing stock rom from different source. Any idea on this one?
Update
I tried to flash a stock rom on my Lenovo A328 with SP Flash Tool but the process was interrupted and now after I flashed the stock rom successfully, the phone won't charge nor boot, not even to recovery. I noticed in my EMMC Flash that the sizes of GP1 - 4 are all 0x0.
I found a solution in here,
http://forum.xda-developers.com/show....php?t=2792667
It says that I have to flash the rom using DOWNLOAD first and then flash it again with FIRMWARE UPGRADE. I'm already at the FIWMWARE UPGRADE process but I got this error
Failed to get PMT info.
Click to expand...
Click to collapse
Can anyone please help me fix the phone? It will be highly appreciated.

Hi,
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want.

Same problem here, any advice ?

You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want. Yes i want.

Lenovo a328
Plz send the firmware for Lenovo a328

Hi All,
I have the same problem
did you find any solution?
I want the firmware for Lenovo a328

lenovo a328 not turning on even I successfully flash sa firmware
same problem here.
someone can help?
need some help to resurrect my lenovo a328.
if I format it, there's an error 5073.

Hi, I am having the same problem. Could you help?

Hello everyone!
I am facing the same problem!!!
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???

please send me the firmware

I have the same problem about my lenovo a328. After flashing, it's not booting and turning on. It's not even charging. So what I did is I tried to firmware upgrade it and I got this ''failed to get PMT info'' alert. Someone know how to revive this phone?

I got 2 phones and they've bricked themselves
Hi,
I got 2 Lenovo A328s and they've bricked themselves, having the same symptoms.
I can get them to boot in Recovery, and I am waiting to download an image to sideload with ADB, which seems to work.
One of them was still in use, but had software glitches, like the camera driver not working in any app.
The other one was replaced 10 months ago, but after long time, it also bricked.
I haven't attempted any flash of new firmware.

I have the same problem, the phone isn't charging and I can't use vol up+ power buttons.
Can you send me the software please and some instructions?

lenovo a6000 softbrick

guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out

Bro need help I installed twrp and then cm 13 on my a6000 and by mistake I deleted backup of my stock kk rom and now when I try to go in download mode, recovery it doesn't open it show only Lenovo logo . By mistake I flashed a6000+ stock recovery and after that when I try to flash stock recovery of a6000 using adb nothing open .. so now nothing download mode or recovery mode is opening but i still boot into cm13 how solve it to revert back to kk ?

Solution
Shubhamraaj said:
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Click to expand...
Click to collapse
I had also stuck in boot logo once in a custum ROM .
but i fixed it : steps .
Download twrp recovery in your pc. ( rename it as twrp.img ) ,
Boot your phone in to fastboot mode .,
Make sure ur pc has ADB drivers ,
Once , phone get into fastboot mode ,
Type this Commands : 1)fastboot devices ( to check if ur phone is getting detected or not , if it shows no device found , check connection )
2) fastboot flash recovery twrp.img ( to flash recovery)
3) fastboot reboot recovery ( to boot into recovery )
4) download any ROM to SD card and flash it from recovery.
Hit thanks button if this helped you.

Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!

My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??

Androidsabya said:
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Click to expand...
Click to collapse
FOLLOW THIS

Need help
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
Actually 1st i did root my lenovo a6000. Then i was trying to install cyanogen rom through sd card. But it showed e verification failed. And while booting it gets stock showing cyanogen logo. I tried my phone to connect to pc, but it only charges my phone but doesn't show up in connected device in my laptop. I went to an mobile repair shop, bcoz i thought may be i was missing something. But after visiting 3 repair shops, they also couldn't solve my problem. Now how can i get my mobile to back condition ? Need help. If anyone can help plz give quick rply. But i need to talk to someone who can help regarding this issue. So if you can talk to me, plz call me 7008678740. Thank. Plz give response.

New problem arrised
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!

Androidsabya said:
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Click to expand...
Click to collapse
On first look, it seems like your phone is in bootloop and you need to flash new ROM after wiping the partitions correctly. But, then you are saying that same thing is happening when you insert this battery in another A6000. I think your battery has gone rogue due to some virus, just throw it away. Jokes apart, if another device is showing same behaviour then its almost 100% sure, that your battery has issues and need to be replaced. And, why don't you actually check switching on your phone by putting the battery from that another A6000 into your A6000.

I have checked with another battery, my phone works fine. But that particular battery is doing only on off continuously. But #important thing is , i don't think the battery has gone. Bcoz during the on off process, if i press volume down key, it shows lenovo logo and gets stock there. If the battery has problem, then how can be it stays on showing the logo ?? Confused ???

please help.

My lenovo k4 note totally dead after after a few days installing RR 5.8.5 and Zero addition kernel,charging in the night and in the morning i find my device is dead can't boot ,no bootloader,no recovery ,not even vibrate,can' t connect to pc when i' m trying to use SP flash tool to recover it,can' detect by flash tool ,i was trying every preloader Driver i was found in xda or another site,
Please anyone i need your experience to bring my device up @mohancm i really apreciate if you can drop some word here,please,

glewo45 said:
My lenovo k4 note totally dead after after a few days installing RR 5.8.5 and Zero addition kernel,charging in the night and in the morning i find my device is dead can't boot ,no bootloader,no recovery ,not even vibrate,can' t connect to pc when i' m trying to use SP flash tool to recover it,can' detect by flash tool ,i was trying every preloader Driver i was found in xda or another site,
Please anyone i need your experience to bring my device up @mohancm i really apreciate if you can drop some word here,please,
Click to expand...
Click to collapse
i think your mobile is bricked.... download sp flash tool and stock rom....load scatter file then click on download button then connect your phone with a data cable if flash tool do not recognise your phone then press volume up key...and flashing will start...hope this will work

MI A1 Bricked HARD!!!-AlekDev

Hi Guys my MI A1 was bricked i just use the test point to fix and my pc recognized as Qualcomm 9008 so flashed latest 8.0 everything worked but wifi and bt was broken so i decided again to put in EDL and flash it with same firmware after that MI flash shows success but device doesn't turn it jsut keep blinking led and goes to EDL everytime i connect to PC...tried with Nougat and Oreo firmwares same...i checked logs and saysthat device is successfully flashed and rebooted...but nothing just black screen and blinking led..Can anyone Help me?I can't send to Service because i will need to wait 1 month also i opened the back cover so i lost the warranty.....:crying::crying:

Hi,
did you try to flash with qfil or only mi flash ?
I'm not sure but may you ask Cosmic Dan he was planing to do an unbrick guide and he mentioned files which you can use with qfil to unbrick your device. I don't know how far he is with it.
But if you did manage to unbrick so far and only BT and WiFi is your issue aren't there several fix guides for the persist partition ?
For my personal experience after I had to unbrick my old n6p I had the same issue after flashing. Phone stays black and led just blinking. Try to long pressing power, or other button combinations while plugg and unplugging USB to pc and I mean really long pressing the buttons. It sounds a bit weired but my n6p came back and booted as usual.
I'm sry, but I can't tell you the right combination because I tried so much that time, because it was my only phone.
Good luck !

Bro if You Have A Backup Of Your phone Then flash It.
Sent from my [device_name] using XDA-Developers Legacy app

Qfil doesn't work because we have A/B Partition Layout....i have backup of my partitions that's not issue....

How much battery had you left at flashing ? May its just drained and not able to boot. Sometimes it's the stupid and simple things. If you have partition backups you should be able to fix your WiFi and BT.

coremania said:
How much battery had you left at flashing ? May its just drained and not able to boot. Sometimes it's the stupid and simple things. If you have partition backups you should be able to fix your WiFi and BT.
Click to expand...
Click to collapse
70%

Alek Dev said:
Hi Guys i ws experimenting something with my device so i bricked fully i just use the test point to fix and my pc recognized as Qualcomm 9008 so flashed latest 8.0 everything worked but wifi and bt was broken so i decided again to put in EDL and flash it with same firmware after that MI flash shows success but device doesn't turn it jsut keep blinking led and goes to EDL everytime i connect to PC...tried with Nougat and Oreo firmwares same...i checked logs and saysthat device is successfully flashed and rebooted...but nothing just black screen and blinking led..Can anyone Help me?I can't send to Service because i will need to wait 1 month also i opened the back cover so i lost the warranty.....:crying::crying:
Click to expand...
Click to collapse
You can get it back. You have lost the Wifi and Bluetooth (Mac Address files). You can boot your phone if it is in edl mode. Just press the Power Button for more than 30-40 seconds. Your phone will boot. If possible, try to stick the back cover and show it to service center. They will change your phone's motherboard! They don't know about edl and everything! They only change internal parts! :good:

birarvindersingh said:
You can get it back. You have lost the Wifi and Bluetooth (Mac Address files). You can boot your phone if it is in edl mode. Just press the Power Button for more than 30-40 seconds. Your phone will boot. If possible, try to stick the back cover and show it to service center. They will change your phone's motherboard! They don't know about edl and everything! They only change internal parts! :good:
Click to expand...
Click to collapse
Yes Go service centre When Your phone in warrenty.
Sent from my [device_name] using XDA-Developers Legacy app

Try updating your drivers. Happened to me once, MiFlash didn't detect it, but driver MANUAL update helped.

If u r using Mac Then Try in windows with Fastboot Rom.

Phone sent to Service Center....hopefully they will repair with my warranty,So No releases/No Builds around 1 month

After lot of waiting (FROM 23 MAY) this is what i got from my service center
" AFTER SERVICE REVIEWS AND SOFTWARE INSTALATION DEVICE REMAINS WITH A LOADING / DAMAGED MEMORY CHIP"
"The phone is stuck in EDL Mode due to improper use and serious damage from all sides. The same after a service overview and software installation could not be turned on or raised (shows no signs). The service order states that if you want to service, you will be offered an offer to change the motherboard. Greeting"
After that they tell me this"
"Otherwise, changing the motherboard with a working hand would be around 182 USD. Greeting"
i don't have that money it's too much expensive for me so i'm without any phone....

Alek Dev said:
Qfil doesn't work because we have A/B Partition Layout....i have backup of my partitions that's not issue....
Click to expand...
Click to collapse
I restored my Mi A1 at least 3 times with QFIL, not a problem.

meltbanana said:
I restored my Mi A1 at least 3 times with QFIL, not a problem.
Click to expand...
Click to collapse
What version of QFIL? What OS did you have? what firmware did you use? or you have made backup with qfil then restore it? if you have that will be good to send me at least i can try it ....i ussually get this error dmssfail with QFIL.....ty

Alek Dev said:
What version of QFIL? What OS did you have? what firmware did you use? or you have made backup with qfil then restore it? if you have that will be good to send me at least i can try it ....i ussually get this error dmssfail with QFIL.....ty
Click to expand...
Click to collapse
Windows 10 Pro, QFIL latest (2.7 or so), I used the latest stock ROM (tissot_images_V9.5.11.0.ODHMIFA_8.0) provided by Xiaomi.
I can only recommend to extract a ROM to a path close to your volume root, for example D:\Temp\tissot_images_V9.5.11.0.ODHMIFA_8.0.
By using deeper paths you'll probably get errors. Flat build. :good:

meltbanana said:
Windows 10 Pro, QFIL latest (2.7 or so), I used the latest stock ROM (tissot_images_V9.5.11.0.ODHMIFA_8.0) provided by Xiaomi.
I can only recommend to extract a ROM to a path close to your volume root, for example D:\Temp\tissot_images_V9.5.11.0.ODHMIFA_8.0.
By using deeper paths you'll probably get errors. Flat build. :good:
Click to expand...
Click to collapse
Thanks when i get the phone back from my carrier i will try it and post here

@meltbanana What Drivers did you use? some link?

Alek Dev said:
@meltbanana What Drivers did you use? some link?
Click to expand...
Click to collapse
I used the drivers provided by QFIL. Btw. flashing a flat build by QFIL recreates the partition layout, it really doesn't care about two system partitions.
Flashed EDL mode when I went back from treblizing earlier without going back to stock partition layout in first place.
Qualcomm Flash Image Loader handled it flawlessly to restore the standard gpt provided by rawprogram0.xml .

meltbanana said:
I used the drivers provided by QFIL. Btw. flashing a flat build by QFIL recreates the partition layout, it really doesn't care about two system partitions.
Flashed EDL mode when I went back from treblizing earlier without going back to stock partition layout in first place.
Qualcomm Flash Image Loader handled it flawlessly to restore the standard gpt provided by rawprogram0.xml .
Click to expand...
Click to collapse
So it restores the partition layout right? Also can you provide me link of QFIL?

Alek Dev said:
So it restores the partition layout right? Also can you provide me link of QFIL?
Click to expand...
Click to collapse
true, it restores the default partition layout, please pick one, that's what I used: https://duckduckgo.com/?q=QPST_2.7.438.3&atb=v89-4_g&ia=web
and here's the ROM link provided by Xiaomi: http://bigota.d.miui.com/V9.5.11.0....0.ODHMIFA_20180504.0000.00_8.0_1a04581058.tgz