My lenovo k4 note totally dead after after a few days installing RR 5.8.5 and Zero addition kernel,charging in the night and in the morning i find my device is dead can't boot ,no bootloader,no recovery ,not even vibrate,can' t connect to pc when i' m trying to use SP flash tool to recover it,can' detect by flash tool ,i was trying every preloader Driver i was found in xda or another site,
Please anyone i need your experience to bring my device up @mohancm i really apreciate if you can drop some word here,please,
glewo45 said:
My lenovo k4 note totally dead after after a few days installing RR 5.8.5 and Zero addition kernel,charging in the night and in the morning i find my device is dead can't boot ,no bootloader,no recovery ,not even vibrate,can' t connect to pc when i' m trying to use SP flash tool to recover it,can' detect by flash tool ,i was trying every preloader Driver i was found in xda or another site,
Please anyone i need your experience to bring my device up @mohancm i really apreciate if you can drop some word here,please,
Click to expand...
Click to collapse
i think your mobile is bricked.... download sp flash tool and stock rom....load scatter file then click on download button then connect your phone with a data cable if flash tool do not recognise your phone then press volume up key...and flashing will start...hope this will work
Related
I have this Lenovo A328 which suddenly had multiple and continuous gapps crashes. I tried to do a factory reset but the problem still existed. I decided to flash the stock rom using SP Flash Tool. Flashing the stock rom succeeded but then after, the device does not charge nor boot up. It does not even respond to vol up(or down) + power which brings up a menu for testing the device(not recovery). I tried to format it first before flashing but the result is still the same. I also tried flashing stock rom from different source. Any idea on this one?
Update
I tried to flash a stock rom on my Lenovo A328 with SP Flash Tool but the process was interrupted and now after I flashed the stock rom successfully, the phone won't charge nor boot, not even to recovery. I noticed in my EMMC Flash that the sizes of GP1 - 4 are all 0x0.
I found a solution in here,
http://forum.xda-developers.com/show....php?t=2792667
It says that I have to flash the rom using DOWNLOAD first and then flash it again with FIRMWARE UPGRADE. I'm already at the FIWMWARE UPGRADE process but I got this error
Failed to get PMT info.
Click to expand...
Click to collapse
Can anyone please help me fix the phone? It will be highly appreciated.
Hi,
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want.
Same problem here, any advice ?
You can try format all+download option of spflashtool. I can send you the firmware for Lenovo a328 if you want. Yes i want.
Lenovo a328
Plz send the firmware for Lenovo a328
Hi All,
I have the same problem
did you find any solution?
I want the firmware for Lenovo a328
lenovo a328 not turning on even I successfully flash sa firmware
same problem here.
someone can help?
need some help to resurrect my lenovo a328.
if I format it, there's an error 5073.
Hi, I am having the same problem. Could you help?
Hello everyone!
I am facing the same problem!!!
Tried almost all the solutions suggested on different sites or forums, nothing works, still no charge and no start...
Change the PC, the USB cables, drivers, ROM's, you name it... Someone said this MTK devices are hard to brick but still, why we cannot revive our devices??? Hardware failure? Not really according to some technicians as long your phone is detected by the pc in device manager, the phone CAN be "unbricked".
SO, we are missing something, we doing something wrong???
We need help.... SOMEONE???
please send me the firmware
I have the same problem about my lenovo a328. After flashing, it's not booting and turning on. It's not even charging. So what I did is I tried to firmware upgrade it and I got this ''failed to get PMT info'' alert. Someone know how to revive this phone?
I got 2 phones and they've bricked themselves
Hi,
I got 2 Lenovo A328s and they've bricked themselves, having the same symptoms.
I can get them to boot in Recovery, and I am waiting to download an image to sideload with ADB, which seems to work.
One of them was still in use, but had software glitches, like the camera driver not working in any app.
The other one was replaced 10 months ago, but after long time, it also bricked.
I haven't attempted any flash of new firmware.
I have the same problem, the phone isn't charging and I can't use vol up+ power buttons.
Can you send me the software please and some instructions?
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Bro need help I installed twrp and then cm 13 on my a6000 and by mistake I deleted backup of my stock kk rom and now when I try to go in download mode, recovery it doesn't open it show only Lenovo logo . By mistake I flashed a6000+ stock recovery and after that when I try to flash stock recovery of a6000 using adb nothing open .. so now nothing download mode or recovery mode is opening but i still boot into cm13 how solve it to revert back to kk ?
Solution
Shubhamraaj said:
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Click to expand...
Click to collapse
I had also stuck in boot logo once in a custum ROM .
but i fixed it : steps .
Download twrp recovery in your pc. ( rename it as twrp.img ) ,
Boot your phone in to fastboot mode .,
Make sure ur pc has ADB drivers ,
Once , phone get into fastboot mode ,
Type this Commands : 1)fastboot devices ( to check if ur phone is getting detected or not , if it shows no device found , check connection )
2) fastboot flash recovery twrp.img ( to flash recovery)
3) fastboot reboot recovery ( to boot into recovery )
4) download any ROM to SD card and flash it from recovery.
Hit thanks button if this helped you.
Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Androidsabya said:
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Click to expand...
Click to collapse
FOLLOW THIS
Need help
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
Actually 1st i did root my lenovo a6000. Then i was trying to install cyanogen rom through sd card. But it showed e verification failed. And while booting it gets stock showing cyanogen logo. I tried my phone to connect to pc, but it only charges my phone but doesn't show up in connected device in my laptop. I went to an mobile repair shop, bcoz i thought may be i was missing something. But after visiting 3 repair shops, they also couldn't solve my problem. Now how can i get my mobile to back condition ? Need help. If anyone can help plz give quick rply. But i need to talk to someone who can help regarding this issue. So if you can talk to me, plz call me 7008678740. Thank. Plz give response.
New problem arrised
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Androidsabya said:
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Click to expand...
Click to collapse
On first look, it seems like your phone is in bootloop and you need to flash new ROM after wiping the partitions correctly. But, then you are saying that same thing is happening when you insert this battery in another A6000. I think your battery has gone rogue due to some virus, just throw it away. Jokes apart, if another device is showing same behaviour then its almost 100% sure, that your battery has issues and need to be replaced. And, why don't you actually check switching on your phone by putting the battery from that another A6000 into your A6000.
I have checked with another battery, my phone works fine. But that particular battery is doing only on off continuously. But #important thing is , i don't think the battery has gone. Bcoz during the on off process, if i press volume down key, it shows lenovo logo and gets stock there. If the battery has problem, then how can be it stays on showing the logo ?? Confused ???
In my nokia 6 ta1000 , i flashed mena rom and used oreo for 3days. Now,today i wanted to roll back to my old ta1000 rom. So i flashed it .it was successful. But when the device booted it stuck in nokia ... Thn no progress. I think it bricked ... Thn i flashed again but no result... Now the device don't recognized by ost app also... Help me as soon as possibe,,as it is my daily driver .???
Note: it doesn't go to fastboot either. It just shows ,no command. And turned off instantly...my battery chrg is 75% though...
Ta-1000 rom mdl: D1C-331A-0-00CN-A01.7.1.nb0
MENA ROM MODEL: PLE-3320-0-00WW-A02.nb0
When it shows "no command" press power button and volume up, then immediately release volume up button. There is a chance you'll get into recovery and from there you can put your phone into "download" mode, so OST LA will detect it.
P.S. A bit dumb idea to do risky experiments with a daily driver.
ziaur786 said:
In my nokia 6 ta1000 , i flashed mena rom and used oreo for 3days. Now,today i wanted to roll back to my old ta1000 rom. So i flashed it .it was successful. But when the device booted it stuck in nokia ... Thn no progress. I think it bricked ... Thn i flashed again but no result... Now the device don't recognized by ost app also... Help me as soon as possibe,,as it is my daily driver .
Note: it doesn't go to fastboot either. It just shows ,no command. And turned off instantly...my battery chrg is 75% though...
Click to expand...
Click to collapse
Dear brother, i would like to suggest you one thing, I not 100% sure but it might help you, follow these steps
Please read the instructions very carefully
also make sure you have all driver and framework properly installed
1. Download the TA-1000 Firmware from here
2. Then open your OST tool.
3. When you select the firmware on OST tool, after that it will prompt you to connect your device
4. Just do not do anything, keep patience, turn off your device properly and then connect to the computer. It will directly boot into download mode.
done, rest of the steps are same as you flashed your device before.
Enjoy
hit the thanks button if you find this useful
happy flashing
My lenovo k4 note totally dead after installing RR-N-v5.8.5-20180105-k5fpr-Final and Zero and while tried to install TWRP using MarshMallow method my device is dead can't boot , no bootloader ,no recovery ,not even vibrate , and not detecting
can' t connect to pc when
trying to use SP flash tool to recover it,can' detect by flash tool
tried to flash with flash tools ver. 5.1524 but not detecting by pc and shows this error always when try to connect pc with flash tool
please see image : https: // goo . gl / bjndc5
kagadhvi said:
My lenovo k4 note totally dead after installing RR-N-v5.8.5-20180105-k5fpr-Final and Zero and while tried to install TWRP using MarshMallow method my device is dead can't boot , no bootloader ,no recovery ,not even vibrate , and not detecting
can' t connect to pc when
trying to use SP flash tool to recover it,can' detect by flash tool
tried to flash with flash tools ver. 5.1524 but not detecting by pc and shows this error always when try to connect pc with flash tool
please see image : https: // goo . gl / bjndc5
Click to expand...
Click to collapse
My best advice would be to consult to the service center... As far as I know, in your current phone condition, there's nothing that we can do... Even if the service center would cost not little, they would surely know what to do
CandyCone said:
My best advice would be to consult to the service center... As far as I know, in your current phone condition, there's nothing that we can do... Even if the service center would cost not little, they would surely know what to do
Click to expand...
Click to collapse
i did it bro
it took sometime but finally i completed solve k4 note issue
figured out
kagadhvi said:
i did it bro
it took sometime but finally i completed solve k4 note issue
figured out
Click to expand...
Click to collapse
Can you please share the process how to solve dead lenovo k4 note issue? My phone is completely dead, service center people also couldn't do anything, please help me.
gpnth22 said:
Can you please share the process how to solve dead lenovo k4 note issue? My phone is completely dead, service center people also couldn't do anything, please help me.
Click to expand...
Click to collapse
download latest flash tools
download stock rom version marsmallow (you'll find it on foru xda)
than flash it with latest flash tools
done.
kagadhvi said:
download latest flash tools
download stock rom version marsmallow (you'll find it on foru xda)
than flash it with latest flash tools
done.
Click to expand...
Click to collapse
I tried flashing stock rom with SP flash tool but my device is not detecting, all drivers are installed properly tried by pressing volume keys & power button also but still not detecting, please give me a solution.
Hi,
I'm not sure I'm posting in the right section but, I had a really bad experience upgrading to android 10. Really sluggish and slow... so I tried to downgrade to android 9 by using Lenovo's Rescue and Smart Assistant.
What I did, is to find the stock ROM for my model, and replace the files downloaded by the Rescue Assistant (which downloaded the latest firmware). The process went through, but now the device wont power on.
When I plug in the USB, windows makes a sound, the charging light comes on, but The rescue Assistant nor SP flash tool is able to flash the latest firmware.
Is it bricked for good?
Model : TB-XF606F
Hardware number : 60
Maybe your computer doesn't recognize your tablet. Did you ever try using sp flash tool with your tablet before? You can try reinstall or install a driver for your table if you haven't done it yet.
Well the tablet is recognized as the "mtk vcom..." in device manager. I guess it is the driver that the lenovo rescue app installed.
I have never used sp flash tool with my tablet, just the lenovo rescue.
I tried on 2 different pc and it is the same thing. I think the problem is that I can't turn off the tablet properly, even though, all I can see is a black screen.
I will try to drain the battery by keeping the power button pressed with some scotch tape. I don't know what I can do else.
Edit: I tried a few other times with flash tool using different setting for the connection (with battery and full speed) and nothnig happened. But now windows says it does not recognize my tablet.
did the same thing exactly. . bricked lenovo m10 fhd plus x600v after i flashed a downgrade version. dont try to downgrade this thing. i had already flashed it with 3 or 4 versions the same way , but when i chose to flash the oldest version available with the model , this tab got completly unresponsive , no feedback when try to boot into recovery, fastboot, or system . neither does it gets recognised in windows or anything - device manager dowsnt recognise this usb device ( in device manager properties comments it reads- USB\DEVICE_DESCRIPTOR_FAILURE). if you find a way to reflash the device please let us know. good luck .
Bricked mine after being completely running smoothly on Lineage, then was messing around trying to get gapps installed and jacked up the partitions. TWRP said no OS. Kept messing around and mistakenly locked the bootloader again with apparently an unverified boot partition. . I couldn't get SP Flash tool to work ever either. Pretty sure it's a door stop now.