Blu Studio C Hd s090q stuck on logo screen - Blu Studio 5

Hello everyone.
I have a Blu Studio C HD s090q stuck on logo screen forever.
I have downloaded this room here http://www.mediafire.com/download/d9bdr1dbw4qk9ic/BLU_S090Q_V07_REPAIR.rar
and SP Flashtool v5.1428.00 and MTK USB drivers which I have installed and restarted computer after that.
Followed this tutorial here: http://www.blogtechtips.com/2015/03...phone-flash-tool-to-flash-any-blu-smartphone/
The thing is after I click "Download" button of SP flashtool and then connect my device (without battery as suggested on tutorial) and press vol up, nothing happens.
What should I do? Could somebody give me a little help? I have bought this phone just 3 weeks ago.
Thanks in advance.
Edit: I just figured out what was wrong after many and many tries and I would like to share in case somebody have a issue like mine.
First off, I had to download and installSP Flashtool ver 5.1628 and MKT USB Drivers and I also installed MT65xx Preloader Auto-Driver.
After I installed all these, I had to manually install "MediaTek DA USB VCOM (Android)" driver to my computer, then as I had bricked my phone by replacing KingRoot for SuperSU, while following previous tutorials, instead of choosing option "Format All + Download" (which wasn't working at all in my case), I picked the option called "Firmware update". Hit Download > while pressing vol + button, plugged usb cord / cable > SP Flashtool started downloading and I released vol+ button.
That's it! If somebody have any doubt, feel free to contact me.

Hello! I have exactly the problem you had your . My BLU C HD s090Q has been brick . I can not even enter the stock recovery . I can not do anything. And I followed the footsteps of your solution, but it still gives me trouble flashing . I'm desperate friend! Let's talk please , and help me to relive the cell .

Ramón Mejía said:
Hello! I have exactly the problem you had your . My BLU C HD s090Q has been brick . I can not even enter the stock recovery . I can not do anything. And I followed the footsteps of your solution, but it still gives me trouble flashing . I'm desperate friend! Let's talk please , and help me to relive the cell .
Click to expand...
Click to collapse
Did you installed MTK drivers?
In some cases you have to install it manually to your computer.
Try this tutorial here:
https://www.drivereasy.com/how-to-manually-install-a-driver-in-your-computer/
Best regards,
Cristy.

Hi friend! I have a doubt: How can I root this phone? I have the same model as you but I can't find any guide for root this device, and how to flash a custom recovery and a custom rom (like cyanogenmod 13 marshmallow) neither... Can you help me please? Thank you all.

Hi! I thing that is possible port this http://forum.xda-developers.com/hot-2/orig-development/official-twrp-infinix-hot-2-t3394989 For our device (is the same MTK) what do you thing?

same problem, stuck on blu logo, and i cant format the phone
I think is EMMC Problem!!!

luis.manresa14 said:
same problem, stuck on blu logo, and i cant format the phone
I think is EMMC Problem!!!
Click to expand...
Click to collapse
Don't format the phone. Try the FIRMWARE UPGRADE option!

I have a phone blu studio c hd that stopped working after I downloaded a new ROM and after the download finished the phone completely stopped and did not charge or read the charger plz help me

granado0 said:
I have a phone blu studio c hd that stopped working after I downloaded a new ROM and after the download finished the phone completely stopped and did not charge or read the charger plz help me
Click to expand...
Click to collapse
There are several different BLU Studio C HD models. What is the MODEL NUMBER of your device? And what is the specific complete name of the ROM that you flashed?
Sounds like you flashed the wrong ROM.
Sent from my Nexus 7 using XDA Free mobile app

What i do im download rom firmware stok rom
And what do I do the phone does not give any sign of life ROM that you downloaded is Ron Genuine but not from the company's site because the company's site does not contain any support for the phone

granado0 said:
And what do I do the phone does not give any sign of life ROM that you downloaded is Ron Genuine but not from the company's site because the company's site does not contain any support for the phone
Click to expand...
Click to collapse
You had a custom recovery on your phone? How exactly did you "download" the custom ROM to your device? You installed it from a zip using the custom recovery? Please explain.
Also what is the EXACT FILE NAME of the ROM you downloaded. Ron Genuine is not something I'm familiar with. Please answer the question I asked you. Without the exact file name, I cannot help you.
Sent from my 5056D using XDA Free mobile app

Hello Friend, I hope that even in these days I can respond. I have a problem with my Android ROM BLU Q S090Q / Android 6.0. I installed the ROM and everything perfect, I solved the Bricked of the phone using the MTK Droid Tools 2.5.3, the problem is that I could not rootearlo with any program (KingRoot, OneclicRoot, etc.) to be able to change the IMEI that I have it with another number and does not activate the Android's antenna. The Recovery of this Terminal is the original that brings the ROM that was installed, my question is: Will you install the TWRP you mention here and then load the SuperSU Binary 'to Rootearlo? What method can I use to robe my terminal? :silly:
I also read something on the Net about an Android ROM Nougat on BLU Studio G2 (Android 7.1.1 / CM14.1), is this true or is it a Fake?
Posd. I can not change the IMEI with the option "Engineer Mode" because in the terminal, the line inside the menu "CDS information" does not exist or is hidden, the other programs to activate it are NOT installed or blocked with an error message, I leave some captures to give you an idea.
"java.io.FileNotFoundExceptiion:/dev/pttycmd1: open failed: EACCES (Permission denied)/dev/pttycmd1: open failed: EACCES (Permission denied)"
NOT Root Imposible!: http://prntscr.com/gi9ez3
Captured ERROR: https://prntscr.com/gisw4u
No Line CDS informations: https://prntscr.com/gitbd8
Thk...

Related

[Q] Blu Studio 5.0s totally bricked android

Hi everyone, I'm sorry if I am posting at wrong place but I need your help !
Yesterday my Blu Studio 5.0s has frozen and I've tried for a hard reset, till there, ok !
but after hard reset my phone died !
YES, the phone do not start up, do not light up, can't put on recovery mode, don't charge, it's totally bricked :crying:
could someone PLEASE help me ?
this kind of thing never has happened with me before :crying:
Try to contact a Blu Store for your Country... I have a Backup original stock from my phone but you can't restore via Fastboot...
Also try to download Stock Firmware from another cellphone like Karbonn... visit that link...
http://forum.xda-developers.com/showthread.php?t=2498992
The best rom for me, is Concur One...
not work :/
davidequiz said:
Try to contact a Blu Store for your Country... I have a Backup original stock from my phone but you can't restore via Fastboot...
Also try to download Stock Firmware from another cellphone like Karbonn... visit that link...
http://forum.xda-developers.com/showthread.php?t=2498992
The best rom for me, is Concur One...
Click to expand...
Click to collapse
Thank you for help my frien but I've tried, but that's not working,
my problem is:
I've put phone in recovery mode, then I've plugged on Windows so Windows asked me to format device and I hit yes
since then, my phone is died . don't turn on, do not charge ... by this way windows no longer recognise my device
and by the way, I can't flash the phone :/
don't know if I'll can fix this problem ...
and on my country, have no Blue Store or assistance
felipemichelr said:
Thank you for help my frien but I've tried, but that's not working,
my problem is:
I've put phone in recovery mode, then I've plugged on Windows so Windows asked me to format device and I hit yes
since then, my phone is died . don't turn on, do not charge ... by this way windows no longer recognise my device
and by the way, I can't flash the phone :/
don't know if I'll can fix this problem ...
and on my country, have no Blue Store or assistance
Click to expand...
Click to collapse
The battery not empty?
Try charging the battery use ebc...
the battery is full charged !
glori2 said:
The battery not empty?
Try charging the battery use ebc...
Click to expand...
Click to collapse
see friend, the problem isn't with the battery, I've tried many others ...
the real reason is 'cause I hit format device and it has formatted all partitions from the phone ...
does anyone know how to fix ?
My stock recovery won't load. Any suggestions?
Sent from my BLU STUDIO 5.0 using Tapatalk
stock ROM
I have never been able to find a stock ROM for Blu devices. I tried finding one for my Blu Studio 5.5s and Bluproducts Support says you must mail your phone to the repair center, that they will not supply ROMs for their phones. Sad situation.
Also it's too late to warn you but anytime you connect a USB device that is known to work, even a little bit, when WIndows says that something needs formatting, NEVER do it, it usually means that there is a problem communicating that Windows believes is an unformatted memory card. This is hardly ever the case.
I guess we are on our own with these Blu phones until either they either take off in popularity and we see more recovery tools or they quite making them and after we have bricked them all due to lack of recovery tools.
Blu Factory Default Recovery for BLU 5.0 2/ 5.5s
Hello BLU User of 5.0 2/ 5.5s
Okay the first thing I will say " DO NOT..... I REPEAT.... DO NOT USE ANY Version OF AIO FLASHER "
because the program is a real B.S flasher.... 1. it hangs like crazy
2. their is no progress bar/ status bar
3. the only real thing that works is backup
4. all partition on drive is NOT PROTECTED
Meaning all partition will be erased if you f-up
hit yes when you should have press NO..
now with all that said both phone are great 5.0 2/ 5.5s
I Already Brick the crap out of Blu 5.0 2, Now I have the Blu 5.5s
All I want to do is Drop CWM on it..... to no avail..
I Can tell you this....... I manage to f-up the stock default recovery
so now there is no default recovery for on a brand new phone
I got it rooted no prob... all of my backup come without default
recovery..
the Question is how can i recreate the default recovery partition
on main system memory card or would it be possible to create that
partition on my 64G SDCARD Via the Computer ?
Edit:
Fixed: Reflash Preloader / EMI from original ROM - Boot into Factory menu (Not Recovery) Turn off the phone.
Start SPFlashTool - Select Scatter.txt (Make sure its Scatter from the Original ROM) - Flash Original FULL Rom - Reflash Boot/Recovery/Pre Entire ROM -
Adb Install Update
Done!
---------------------------
I have managed to brick the Blu Studio X today using SPFlashTool.
EMI Obtain DRAM Fail.
This started when I replaced Factory recovery with CWM which turned out to be even worst than Factory. I got it Rooted without issue but in an effort to Flash back to Stock Recovery, I was unsuccessful.
The phone is detected by the PC now but I cannot do anything. The battery is integrated also.
What I need is the entire Blu Stock ROM including the Preloader. Without this, I cannot Unbrick it. Any help or ideas would be great.
Very urgent please, how do I get into bootloader (factory menu) without going through recovery? My D830u is in a Blu logo boot loop without recovery or anything. I need fastboot mode

[Q&A] [GUIDE][ROOT][RECOVERY][4.4.2] Lenovo A3500-H

Q&A for [GUIDE][ROOT][RECOVERY][4.4.2] Lenovo A3500-H
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
leripe said:
Try toggling the signature verification off in cwm.
Click to expand...
Click to collapse
Please how can i do this step ???? because i have the same problem
10137
same problem here any solution ?
step 6
Installing recovery :
At step 6 .. When I plug my device .. It do nothing ( only battery charging )
BTW / I have lenovo a3500-hv 4.4.2
So .. Can anyone tell me what's wrong ?..
Thank you ~
rooting issue
the flast tool is struck in the following screen for more than 10 minutes
how to unbrick lenovo a3500 hv
I bought Lenovo a3500 HV a couple of months ago and received 4.4.2 update and updated it but i got a problem rooting on it,so I decided to downgrade it to androoid 4.2.2 using ROM (Inclusive with CWM Recovery and Patched boot.img) at (http://forum.xda-developers.com/android/general/lenovo-a3500hv-root-cwm-flashtool-t2899844) using SP Flash tool v5.1352.01,now my device can not power on and not even show battery on screen when the charger inserted on it, Can you please help me how to unbrick my device. Thank you in advance.
Is there a variant for the A8-50 / A5500-H as I'm thinking of buying one for my Mum but only if it can be rooted?
hello,
i'm trying to root my a3500-fl and i'm stuck at loading the zip in cwm. the problem is, that CWM "can't mount /sdcard/", when clicking on "choose zip from sdcard".
can anyone help??
regards,
adam
me again.... a new "feature" appeared: after rebooting the tab i tried to start CWM again and suddenly the stock-recovery started....
flashed CWM again.
- first boot -> cwm
- second boot -> stock-recovery
why??
Works on lenovo A3500 (A7-50 A3500)
Hello,
I post because I 've tried your process on my new tablet A7-50 (android 4.4.2 kitkat) and it worked fine, thanks you very much to Koli96 but the letter indicated on my tablet, it's not H or HV but L.
If someone else has the same it's cool for them, the process "http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208/page2".
Hi !
I did that too for my A3500_FL and it works fine.
However there is a OTA upgrade and the CWM fails to execute it.
What to do, need i to restore Stock recovera (If YES, how to do it ?).
Greetings,
Ender
yes
Hello there for anyone with the lenovo a3500-f this method does work I have successfully installed the cwm and rooted the tablet
need help
can you help me how to root lenovo a3500 - hv? can you attach the software that i need.. please? thanks a lot!
Lenovo A3500-h
Same problem:
At step 6 .. When I plug my device .. It do nothing
error installing super su
I followed the guide step by step it when I try to install super su in download mode it says: installation aborted.
rooting Lenovo A3500H failure
Hi folks,
I followed the procedure but when clicking download in the Smart Phone Flash Tool it goes to "search" and never starts transferring. I have selected Recovery (recovery.img) as required, nothing else.
The tool was started as Administrator on my Windows 8.1 PC.
But i mention one thing: When pressing download a Warning pops up like:
"Not ALL Images are correctly loaded, which may cause boot up issue!
Do you still want to go on downloading anyway?"
As said above, when clicking YES it goes into "search" and nothing happens anymore.
Stop works fine, it does not hang up or such.
The Tablet is recognized on the PC as 3500-H and i can view the data.
I have Android 4.4.2 on the brand new Tablet. Nothing done to it so far.
Who has an idea what goes wrong??
TIA and have a good week.
Hartmut
I just bought an A7-50 A3500-F. Has anybody here been able to upgrade that specific model to Android KitKat 4.4? (I know it works for the A3500-H and A3500-HV, but am wondering about the A3500-F model.)
a3500-fl
Hello i've got a a3500-fl and my tab seem bricked (always black screen) but detected by PC when USB plugged.
i try tu install CWM of this post, but with flashtool nothing appens when i plug the tab...
I've downloaded also the firmware from russian forum...
can someone help me to recover my a3500-FL ?
thanks a lot

Bricked my Life pure Xl 3Gb, Anyone can Helpme?

Hy Guys,
I have tryed to put the rom from Gionee Elife E7 on my Blu life pure XL. The installation occurs everything okay, but when i try to install the recovery, my phone reboot, and never more turn on again... I only can see the Gionee logo, but then shutdown after that. When i try to connect on the PC, just two drivers are showed to me:
-Gionee HS-USB Diagnostics (COM5)
-Qualcomm MMC Storage USB Device
I can enter in ADB mode, but i have no way to acess the internal storage...
Any help will be grateful...
sampadf said:
Hy Guys,
I have tryed to put the rom from Gionee Elife E7 on my Blu life pure XL. The installation occurs everything okay, but when i try to install the recovery, my phone reboot, and never more turn on again... I only can see the Gionee logo, but then shutdown after that. When i try to connect on the PC, just two drivers are showed to me:
-Gionee HS-USB Diagnostics (COM5)
-Qualcomm MMC Storage USB Device
I can enter in ADB mode, but i have no way to acess the internal storage...
Any help will be grateful...
Click to expand...
Click to collapse
when u installed the rom did the phone start up properly?
This look's bad man.
Try power on your phone then
Plugin into your computer.
Open adb then type adb devices
When your device is listed type adb reboot recovery
If IT doesn't boot in recovery mode then You should try flashing again the rom.
Something should work.
Sent from my E7 using Tapatalk
have you fixed it? perhaps i can help
if you've got fastboot (power + vol -)
you can fastboot (sort of like an adb) flash some system images and get your phone getting recognised by gnqc
you need :
ADB
boot.img from blu rom
system1.img from blu
right click on folder where adb and files are (they need to be on same folder for faster tipying)
write
fastboot flash system system1.img
fastboot boot boot.img
after that unplug phone, you need the drivers for blu, change cable from pc port and reconect to see if now it's recognized as a pure xl and check for the drivers.
It should install 2 com ports (hsusb, nmea) 1 adb, 1 modem and 1 storage
that is what i did to mine, hope it works on yours
dzamora said:
if you've got fastboot (power + vol -)
you can fastboot (sort of like an adb) flash some system images and get your phone getting recognised by gnqc
you need :
ADB
boot.img from blu rom
system1.img from blu
right click on folder where adb and files are (they need to be on same folder for faster tipying)
write
fastboot flash system system1.img
fastboot boot boot.img
after that unplug phone, you need the drivers for blu, change cable from pc port and reconect to see if now it's recognized as a pure xl and check for the drivers.
It should install 2 com ports (hsusb, nmea) 1 adb, 1 modem and 1 storage
that is what i did to mine, hope it works on yours
Click to expand...
Click to collapse
this helped me but now i have another problem phone starts up then reboots sometimes it reboots in the middle of starting up i can get into stock recovery but i have no idea what to do now
jetboss said:
this helped me but now i have another problem phone starts up then reboots sometimes it reboots in the middle of starting up i can get into stock recovery but i have no idea what to do now
Click to expand...
Click to collapse
Ok now, you can use GNQC and flash the rom and that will completely restore your phone
NOw if only i could find the blu rom for a 16gb blu
dzamora said:
Ok now, you can use GNQC and flash the rom and that will completely restore your phone
NOw if only i could find the blu rom for a 16gb blu
Click to expand...
Click to collapse
funny thing is i did that and thats whats causing this boot loop i got into recovery after reset and still nothing
is there anything i can push using adb to solve this ?
jetboss said:
funny thing is i did that and thats whats causing this boot loop i got into recovery after reset and still nothing
is there anything i can push using adb to solve this ?
Click to expand...
Click to collapse
perhaps a stock recovery.img can help
dzamora said:
perhaps a stock recovery.img can help
Click to expand...
Click to collapse
ok well im going to try pushing the elife 7 stock recovery and see what happens
tried that all it says is installation aborted .....
You have to to try this,that is how i have unbricked mine today.
power off your phone.
prepare your gnqc so you only have to press download when needed.
power on your phone then conect fast to PC ,then press download.
If IT doesen't leț You ,pres again and just try to see If IT works in different situations.
is a long shot but this is how i unbricked mine today.
fastboot doesen't work on this device,so You can't push anithing. i don't know hou this people are doing that.
If this metod doesn't work You shold try format system and data via adb . and after that gnqc should work.
Muresan01 said:
You have to to try this,that is how i have unbricked mine today.
power off your phone.
prepare your gnqc so you only have to press download when needed.
power on your phone then conect fast to PC ,then press download.
If IT doesen't leț You ,pres again and just try to see If IT works in different situations.
is a long shot but this is how i unbricked mine today.
fastboot doesen't work on this device,so You can't push anithing. i don't know hou this people are doing that.
If this metod doesn't work You shold try format system and data via adb . and after that gnqc should work.
Click to expand...
Click to collapse
He can't use GNQC because his phone's drivers arent insatlled, gionee blocks com ports, and fastboot does work on this device, you just got to flash it, i've been using it several times
A thing to notice is when you want to acces phone storage when phone is bricked You have to poweroff your phone and keep pressing power and volume+ untill some errors start appear in windows.
then You have acces to phone memory and You can paste anithing for later flash with recovery. You must Be very carefull not to format partition when asked !!!!!!
i have bricked my gionee 32 gb several times and always been albe to restore it so,no need to panic,some method should work for You too ,just have to find the right one.
And also,my phone is a rebrand of gionee from Romania,called Allview x1 xTreme,just like life pure Xl and i haven't encountered any problem with usb drivers, just used the one gionee provided. So this mai Be the case for You, i hope i am not wrong with this one.
Com ports are only closed in android 4.4 kitkat so If he didn't update he should Be able to use gnqc.
also You must observe that phone is recognised differently by windows deppending in wich state your phone is. powered off,recovery,or on bootloop. So that's why o have said that gnqc may work but You have to find that state when he is recognised the way that gnqc wants.
Sorry for long post i Hope those observations will help you.
Sent from my E7 using Tapatalk
I finally got it to work using the phone right now to send this message
jetboss said:
I finally got it to work using the phone right now to send this message
Click to expand...
Click to collapse
Got a couple questions would appreciate if u could help.
1. How did u root the blu xl i have both the 16g and 32g
2. Did u install custom recovery in it?
3. Links to downloads plz ...
Thanks in advance
Sent from my SM-G900H using XDA Free mobile app
noblelinux said:
Got a couple questions would appreciate if u could help.
1. How did u root the blu xl i have both the 16g and 32g
2. Did u install custom recovery in it?
3. Links to downloads plz ...
Thanks in advance
Sent from my SM-G900H using XDA Free mobile app
Click to expand...
Click to collapse
I can give you some info on root and recovery, im also hoping for someone to be able to extract the 16blu life pure xl rom since the only one is for 32 gb
for root you can just use Vroot and then after installinh busybox and supersu you may erase it, for the recovery i've got the files just send me a pm and ill mail you the link
dzamora said:
I can give you some info on root and recovery, im also hoping for someone to be able to extract the 16blu life pure xl rom since the only one is for 32 gb
for root you can just use Vroot and then after installinh busybox and supersu you may erase it, for the recovery i've got the files just send me a pm and ill mail you the link
Click to expand...
Click to collapse
I sent u a pm hit me bak and ill help u with the 16gb pure xl
Sent from my SM-G900H using XDA Free mobile app
Came bak to chek if any reply i broke both my screens on the blu life pure xl 16g amd 32 gb im now on galaxy s5 but still im gonna replace the screens and use the phones for something idk most likely android dev practice
I just need info on how to extract the rom from the blu
Thanks in advanced
Sent from my SM-G900H
Where files link to download?
jetboss said:
I finally got it to work using the phone right now to send this message
Click to expand...
Click to collapse
Hi can you tell me how did your phone started back, i am also stuck on reboots , recovery is working fine , any OS/ ROM is giving me reboots all the time..please help
honestly it was a long time ago and i cannot remember what i did except it was a windows xp pc software wouldnt work on 7 and i used stock rom not the one from blu

ZTE Blade Q Lux

good day..regards from malaysia
hello there..
i own a ZTE Blade QLux.
reading on some onlines tutorials, i made a stupid move. i did a format (auto format flash - format whole flash except bootloader). the sp tool said succees.
then, my phone dead, even the red charging light not working. cannot turn on, cnt enter recovery..just DEAD.
to make the senario worst, now my windows not detecting the phone (UNKNOWN DEVICE)
did googled for solution, but cnt find any..what can i do now.thanks in advance
running on:
windows 7 pro
media tek sp flash tools v5.1452.0
kavinraj88 said:
good day..regards from malaysia
hello there..
i own a ZTE Blade QLux.
reading on some onlines tutorials, i made a stupid move. i did a format (auto format flash - format whole flash except bootloader). the sp tool said succees.
then, my phone dead, even the red charging light not working. cannot turn on, cnt enter recovery..just DEAD.
to make the senario worst, now my windows not detecting the phone (UNKNOWN DEVICE)
did googled for solution, but cnt find any..what can i do now.thanks in advance
running on:
windows 7 pro
media tek sp flash tools v5.1452.0
Click to expand...
Click to collapse
give me on PM a Email adres were i can send you a files package for spflashtool to restore your phone
vaserbanix said:
give me on PM a Email adres were i can send you a files package for spflashtool to restore your phone
Click to expand...
Click to collapse
done.thanks mate
problem still persists
havent find the solution yet...
or mayb anyone out there can send me the files to flash my device....or....any other solution?
Found The Solution
After hours spending to find the solution, finally i did it..
for those who having the same prob, here is the solution...
ONLY FOR ZTE BLADE Qlux 4G...........DO NOT TRY THIS ON 3G VERSION...U WILL NEED 3G VERSION FOR THAT....
sorry, i just found solution on russian firmware....but u can still change the language during setup..
download link for needed files:
https://cloud.mail.ru/public/gDXB/eVfZmaF2N
What is required for the process (included in the link above, just download that):
1.1USB VCOM driver. (18.8mb)
2.The original (not custom) firmware. (1.05gb)
3.SP Flash Tool (57.2mb)
4. Bricked ZTE Blade Q Lux 4G
Instructions:
1. Install the USB VCOM driver.
2. Start Flash Tool Administrator (Flash_tool.exe in the program folder).
3. In the window that opens, click the Scatter-loading (on the right side of the program).
4. In the folder with the firmware, select the file MT6752_Android_scatter.
5. Make sure that the Flash Tool automatically put down the boxes next to all the firmware files. (Picture attached for manual upolad &reference)
6. Click the Download button in the Flash Tool.
7. Turn off your phone, then remove and reinsert the battery. (In our case, its already off, so u can skip this step)
8. Connect your phone to the PC and wait for the flashing process. (around 26 minutes, grab some coffee)
9. When Flash Tool window appears green circle, unplug usb cable, turn on the phone.
10. Enjoy your ZTE BLADE Q LUX 4G
pls let me know is if u need my help..
have a nice day...
ps: moderator, u can mark this post as SOLVED...Thanks..
internel space issues
kavinraj88 said:
After hours spending to find the solution, finally i did it..
for those who having the same prob, here is the solution...
ONLY FOR ZTE BLADE Qlux 4G...........DO NOT TRY THIS ON 3G VERSION...U WILL NEED 3G VERSION FOR THAT....
sorry, i just found solution on russian firmware....but u can still change the language during setup..
download link for needed files:
https://cloud.mail.ru/public/gDXB/eVfZmaF2N
What is required for the process (included in the link above, just download that):
1.1USB VCOM driver. (18.8mb)
2.The original (not custom) firmware. (1.05gb)
3.SP Flash Tool (57.2mb)
4. Bricked ZTE Blade Q Lux 4G
Instructions:
1. Install the USB VCOM driver.
2. Start Flash Tool Administrator (Flash_tool.exe in the program folder).
3. In the window that opens, click the Scatter-loading (on the right side of the program).
4. In the folder with the firmware, select the file MT6752_Android_scatter.
5. Make sure that the Flash Tool automatically put down the boxes next to all the firmware files. (Picture attached for manual upolad &reference)
6. Click the Download button in the Flash Tool.
7. Turn off your phone, then remove and reinsert the battery. (In our case, its already off, so u can skip this step)
8. Connect your phone to the PC and wait for the flashing process. (around 26 minutes, grab some coffee)
9. When Flash Tool window appears green circle, unplug usb cable, turn on the phone.
10. Enjoy your ZTE BLADE Q LUX 4G
pls let me know is if u need my help..
have a nice day...
ps: moderator, u can mark this post as SOLVED...Thanks..
Click to expand...
Click to collapse
hi kavinraj88...thank for this stock rom but I have issues with intrnel storage running out...before I flash this stock rom I only have 2 storage that mean internel storage n sd card...but after flash this rom I have 3 storage, internel, phone storage n sd card...all my apps can't move to sd card its install to internet storage that only have 1gb...what can I do to solve this problem?
apih46 said:
hi kavinraj88...thank for this stock rom but I have issues with intrnel storage running out...before I flash this stock rom I only have 2 storage that mean internel storage n sd card...but after flash this rom I have 3 storage, internel, phone storage n sd card...all my apps can't move to sd card its install to internet storage that only have 1gb...what can I do to solve this problem?
Click to expand...
Click to collapse
yeah..im too having 1gb plus internal memory..but im onlu having 2 storage option
1. internal / phone starage
2. external/sd card.
i cant help u in this issue..i just able to give live to the phone..mayb this march i will do some research on that since im quite buzy right now..any progress i will let u know..
kavinraj88 said:
good day..regards from malaysia
hello there..
i own a ZTE Blade QLux.
reading on some onlines tutorials, i made a stupid move. i did a format (auto format flash - format whole flash except bootloader). the sp tool said succees.
then, my phone dead, even the red charging light not working. cannot turn on, cnt enter recovery..just DEAD.
to make the senario worst, now my windows not detecting the phone (UNKNOWN DEVICE)
did googled for solution, but cnt find any..what can i do now.thanks in advance
running on:
windows 7 pro
media tek sp flash tools v5.1452.0
Click to expand...
Click to collapse
Able to root this qlux 4g ?
Yes...pls use iroot
kavinraj88 said:
Yes...pls use iroot
Click to expand...
Click to collapse
Did you flash any ROM.?
yes..now im running on lewa os.. u can find it in the same link given at the top of the post..hope it helps..
kavinraj88 said:
yes..now im running on lewa os.. u can find it in the same link given at the top of the post..hope it helps..
Click to expand...
Click to collapse
Send me custom recovery. I am not able to flash custom recovery. Don't know what to do. Then i found this thread.
Preshak said:
Send me custom recovery. I am not able to flash custom recovery. Don't know what to do. Then i found this thread.
Click to expand...
Click to collapse
i cannot upload here..file size exceeded..
pls download form here
https://drive.google.com/file/d/0B4LLhssSYZcjY01YbVltWFV1dW8/view?usp=sharing
1. im using SP_Flash_Tool_exe_Windows_v5.1452.00.000
2. scatter file n super su included..
hope it helps..
kavinraj88 said:
i cannot upload here..file size exceeded..
pls download form here
https://drive.google.com/file/d/0B4LLhssSYZcjY01YbVltWFV1dW8/view?usp=sharing
1. im using SP_Flash_Tool_exe_Windows_v5.1452.00.000
2. scatter file n super su included..
hope it helps..
Click to expand...
Click to collapse
Recovery from pdanet worked. But sdcard0 is not detecting.
Anyways thanks for taking your time to upload file.
Have you tired xposed installer ?
Do you mind showing me some screenshot.
Any tips on how to connect the phone to PC?
My PC just doesn't want to recognize my phone
Tried several ZTE drivers but they all didn't work
custom rom for zte blade qlux 4g
please upload a custom rom for this model to make the mobile faster.
kavinraj88 said:
After hours spending to find the solution, finally i did it..
for those who having the same prob, here is the solution...
ONLY FOR ZTE BLADE Qlux 4G...........DO NOT TRY THIS ON 3G VERSION...U WILL NEED 3G VERSION FOR THAT....
sorry, i just found solution on russian firmware....but u can still change the language during setup..
download link for needed files:
https://cloud.mail.ru/public/gDXB/eVfZmaF2N
What is required for the process (included in the link above, just download that):
1.1USB VCOM driver. (18.8mb)
2.The original (not custom) firmware. (1.05gb)
3.SP Flash Tool (57.2mb)
4. Bricked ZTE Blade Q Lux 4G
Instructions:
1. Install the USB VCOM driver.
2. Start Flash Tool Administrator (Flash_tool.exe in the program folder).
3. In the window that opens, click the Scatter-loading (on the right side of the program).
4. In the folder with the firmware, select the file MT6752_Android_scatter.
5. Make sure that the Flash Tool automatically put down the boxes next to all the firmware files. (Picture attached for manual upolad &reference)
6. Click the Download button in the Flash Tool.
7. Turn off your phone, then remove and reinsert the battery. (In our case, its already off, so u can skip this step)
8. Connect your phone to the PC and wait for the flashing process. (around 26 minutes, grab some coffee)
9. When Flash Tool window appears green circle, unplug usb cable, turn on the phone.
10. Enjoy your ZTE BLADE Q LUX 4G
pls let me know is if u need my help..
have a nice day...
ps: moderator, u can mark this post as SOLVED...Thanks..
Click to expand...
Click to collapse
Hi, I followed this guide
The phone went brick for some weird reason, tried flashing as instructed and the phone is back again
Unfortunately the imei seems to be missing (can't even detect my simcards)
Anyway I can restore them back?
ferbulous said:
Hi, I followed this guide
The phone went brick for some weird reason, tried flashing as instructed and the phone is back again
Unfortunately the imei seems to be missing (can't even detect my simcards)
Anyway I can restore them back?
Click to expand...
Click to collapse
yes..u can use Maui META Tool or MTK Engineer Mode (play store)..both works...btw, im not using the phone anymore...sold it..
raymond_bqg said:
please upload a custom rom for this model to make the mobile faster.
Click to expand...
Click to collapse
only russiian versioan avaiable so far... google for it
hi.. just wondering, are there qualcomm & mtk version for zte blade q lux 4G ?

LeEco Le 1 Pro (x800) Hard Brick Fix

So...you wanted to push the limit of your Le 1 Pro (x800) phone and install a newer ROM, but surprise...you bricked your phone?! Welcome to the solution...
Requirements:
-Hard-bricked Le 1 Pro, aka x800 (HARD BRICKED = Nothing comes up, no Penguin [fastboot], no Recovery)
-Windows Computer (I used Windows 7 32-bit, but Win8/10 32/64-bit should also work fine.)
-USB Type-C Data/Charge cable
-Qualcomm QPST 2.7 Build 429 (older versions such as 422 or 427 DO NOT WORK, I've tried.)
-Qualcomm Drivers
Review this link: http://www.droidsavvy.com/unbrick-qualcomm-mobiles/ (It talks about putting the computer in test mode and removing all existing drivers...either of which may or may not be required. If you run into trouble, try some of the things from this link!!)
Steps:
1) Download this zip file (contains everything you need): https://mega.nz/#!KthDlSxD!deEIr2y0PAPcPC4CHUSP2zInbBJ5VgBJpWa1B0PYhv0 (1.33GB File Size)
2) Unzip it.
3) Install "QPST.2.7.429.msi".
4) Plug-in phone and install applicable drivers from "Qualcomm_Drivers" folder (x86 = 32-bit, x64 = 64-bit).
5) From your computers applications folder, run "QFIL".
6) At the top, it should say something like "Qualcomm HS-USB QDLoader 9008 (COM3)". (If not try holding the phone's power button for maybe 5-20 seconds. If that doesn't work, see the above link about running your computer in test mode, uninstalling existing drivers, etc.)
6) Choose "Flat Build".
7) Click "Browse..." and choose prog_emmc_firehose_8994_lite.mbn from the "x1_na_dvt1_fastboot" folder.
8) Click "Load XML..." and choose rawprogram_unsparse.xml and when prompted, patch0.xml from the "x1_na_dvt1_fastboot" folder.
9) Click "Download" and let the fun begin.
FYI: Please DO NOT use the rom as-is. This is an early Chinese prototype rom, not a daily driver. Seek help/links from other users to install a different ROM. Perhaps in the future I'll have something better for you.
Disclaimer:
Apologies ahead of time if I don't have time to help you all troubleshoot. This is a complex process and although I've tried to make it easier, there will probably be some speed-bumps...like everything in life. Like you, this has already sucked up a lot of time and energy. I truly hope that those who are successful can help others! Best of luck to you!
So this is for the 64 GB US-Version?
Anyone tried it yet?
t0wlie said:
So this is for the 64 GB US-Version?
Anyone tried it yet?
Click to expand...
Click to collapse
Yes, 64GB NA version. Unknown if it works for other iterations.
Can you please upload the zip file on a most reliable site? I think is the fourth time I try to dowload it and everytime connection broke. Thank you!
Thanks a lot
Thanks a lot. I finally unbricked my phone.
However, the storage became 8gb, blue notification light is constantly on, etc.
Any suggestions how to fix them?
Installed cuoco92 rom but no success on the abovementioned problems.
Wanted to wipe internal storage when installing rom but usb otg shows 0 mb in twrp. Cannot flash zip from usb.
Sucess!!!! I debricked it! Thak you viperdream26. The phone now boots directly to recovery. Which recovery/rom did you flash? I dont want to mess this up again...
Guys please upload the zip on another site. I cannot download it using the link provided by viperdream. Thank you!
yadi.sk/d/KtcTvu6jsHA4g
Thank you!
Well, i did brick my x800 too, but i manage to instal the trwp, its working, i didnt flash any rom, but, i got it bugged instaling twrp...
Now im on recovery loop, how can i get out of this recovery and boot ?
First of all big thanks to viperdream26 !
Same here as Makvelli - 10:44.
Phone only boots in Chinese recovery and then nothing else, can't do anything in this recovery. Does anyone know how to proceed ?
I was to quick with my response ! Phone boots ok, bootanimation is absent (only LETV with underneath two Chinese lines) and the rom is multi-langual.
Rom : Build-number 0.3-20150630-20-test-keys.
Well, now phone reboots every 5 minutes !
I suppose this rom isn't the US version ?
Operation went fine and I got a successful message. Now I have the chinese LeTv recovery!
Bossie12 said:
First of all big thanks to viperdream26 !
Same here as Makvelli - 10:44.
Phone only boots in Chinese recovery and then nothing else, can't do anything in this recovery. Does anyone know how to proceed ?
I was to quick with my response ! Phone boots ok, bootanimation is absent (only LETV with underneath two Chinese lines) and the rom is multi-langual.
Rom : Build-number 0.3-20150630-20-test-keys.
Well, now phone reboots every 5 minutes !
I suppose this rom isn't the US version ?
Click to expand...
Click to collapse
I had the same problem. I put the phone in download mode (volume down and power button till I saw that peungine again). Kinda missed him since my phone was in coma for a week . Then i flashed the twrp 3.0.2 again and now I'm going to wait for maybe cuoco92 to help us with some ideas what to do next? Did anybody tried to flash his custom rom for us x800 13s?
after the restoration of this method it is necessary to update the firmware via fastboot! Firmware is here to see prices yadi.sk/d/lIMbN-bbsHRbT
oleg.cheletemov said:
after the restoration of this method it is necessary to update the firmware via fastboot! Firmware is here to see prices yadi.sk/d/lIMbN-bbsHRbT
Click to expand...
Click to collapse
Please could you explain to update with this firmware through fastboot. Thank you.
there is a video www.dropbox.com/sh/00hsiy8w99zivwm/AACh_5T7u4r08N_Guj7-rGu4a?dl=0
To get your international ROM, partition layout and everything back , just do this:
teorouge said:
Download https://www.dropbox.com/s/109hyb9w7cqnxl3/160519-x1_na_fastboot_Lang_EKL.rar?dl=0 unzip, go fastboot (power+vol up) and run the batch file x1_na_fastboot.bat. I did solve guys, good as new! Thanks @viperdream26 !
Click to expand...
Click to collapse
Cheers!
oleg.cheletemov said:
there is a video www.dropbox.com/sh/00hsiy8w99zivwm/AACh_5T7u4r08N_Guj7-rGu4a?dl=0
Click to expand...
Click to collapse
Yes !!! This is what i was searching for ! Thank you so much. My phone is alive again.
hi guys i really need your help.
i bricked my x800 yesterday and i am trying to get it back alive.
i used qfil with the given files at the right place and hit download..
qfil says com port number 5
switch to edl
download fail switch to EDL fail failed to switch to emergency download mode
finish download
please help, it is way beyond my knowledge
: i managed to get qualcomm hs-usb qdloader 9008 in qfil and i am stucked ..
download fail sahara fail sahara fail
Do we have any custom rom and TWRP for Us version? Thanks for bringing my phone back to life!

Categories

Resources