Related
Hi Guys/Gals,
I'm VERY new to all of this, as far as I was concerned, FLASHING was a bloke in a dirty mackintosh!
I do hope that I'm posting this in the right section (like I said I'm new to all this)
I have (had) an O2 XDA Exec, it had WM5 on it, and my (idiot) boyfriend decided that I should have WM6. I trusted him to do this (I know, I'm too trusting too ). During the installation, using active sync, Vista decided that it knew better and everything went kapput!
I'm sorry that I can't desribe it in your techie speak.
All I have now is a blank screen, and when I plug it in to charge the red light comes on.
ANY and all help would be VERY VERY much appreciated.... and if I may, could I ask that any help is described to me as if you were talking to a 10 year old?
Many, many thanks.
MissGuided
x
Hope Not
Check and read the WIKI for Universal and am pretty sure you can find some answer in there. I nearly bricked my Exec once but every information i needed is in the WIKI. By the way is there anything on the screen? Have you tried doing a hard reset?
Where to start?
Thanks Sandi76,
There is nothing on the screen at all, I've tried doing a soft reset and a hard reset and still nothing.
I'm looking at Wiki now, but I honestly don't know where to start. It must be the blonde (natural of course ) in me!
So, if someone could just help me to get started, it would be appreciated.
....and my boyfriend will be very happy about not having to sleep in the shed!
Thanks again,
MissG
x
PS. I'm not going to let him touch my phones EVER again!
There is hope!
MissGuided said:
Hi Guys/Gals,
I'm VERY new to all of this, as far as I was concerned, FLASHING was a bloke in a dirty mackintosh!
...I have (had) an O2 XDA Exec, it had WM5 on it, and my (idiot) boyfriend decided that I should have WM6. I trusted him to do this (I know, I'm too trusting too ). During the installation, using active sync, Vista decided that it knew better and everything went kapput!
I'm sorry that I can't desribe it in your techie speak.
All I have now is a blank screen, and when I plug it in to charge the red light comes on.
ANY and all help would be VERY VERY much appreciated.... and if I may, could I ask that any help is described to me as if you were talking to a 10 year old?
Many, many thanks.
MissGuided
x
Click to expand...
Click to collapse
Hi,
I think the first big problem is Vista. I've heard that Vista is not friendly to the ROM updating process. I may be wrong and somebody may have solved this but I would suggest that you get hold of a computer with XP in it to try to restart the updating process.
Second, can you put the phone in bootloader state? (press the two option buttons and reset hole at the same time) If so, you can flash your ROM again. I know, i know, to press the three at the same time you need a bit of help...maybe your bf can help with this...
Never again!
Thanks so much Wovens,
I've tried the reset to factory settings and pressed the 0 key, and it just says Clearing..., goes off and then nothing happens.
(I must have very long fingers because I can do it myself, and my b/f needs never come near my phone EVER again!)
I'll have to search about for someone with XP. I think that all my friends use Vista???
Do you think that finding an XP machine is my first step?
Thanks guys... I REALLY do appreciate your help you know?
MissG
x
i stumbled accross your post and thought i'd try to help as ive flashed a hermes, artemis, magician, universal and more using xp and never had any problems. i would give xp a try before giving up
Some more info
MissGuided said:
Thanks so much Wovens,
I've tried the reset to factory settings and pressed the 0 key, and it just says Clearing..., goes off and then nothing happens.
(I must have very long fingers because I can do it myself, and my b/f needs never come near my phone EVER again!)
I'll have to search about for someone with XP. I think that all my friends use Vista???
Do you think that finding an XP machine is my first step?
Thanks guys... I REALLY do appreciate your help you know?
MissG
Click to expand...
Click to collapse
Hi again,
if you only have Vista, read this: http://forum.xda-developers.com/showthread.php?t=292631 it may help.
Again, I would do it with XP. It may be that something got partially flashed when b/f tried, so, factory settings will not work because they are not there any more. You will need to flash again. There is also, if I remember correctly, a way of flashing via SD card that bypasses the computer process. But you would need the phone fully charged or till battery light shows green as you don't have anything showing on screen right now.
Regards,
Wovens
Ain't no stoppin' us now
WOOHOO! I've just figuerd out how to quote! There's no stopping me now
professormark said:
i stumbled accross your post and thought i'd try to help as ive flashed a hermes, artemis, magician, universal and more using xp and never had any problems. i would give xp a try before giving up
Click to expand...
Click to collapse
wovens said:
Hi again,
if you only have Vista, read this: http://forum.xda-developers.com/showthread.php?t=292631 it may help.
Again, I would do it with XP. It may be that something got partially flashed when b/f tried, so, factory settings will not work because they are not there any more. You will need to flash again. There is also, if I remember correctly, a way of flashing via SD card that bypasses the computer process. But you would need the phone fully charged or till battery light shows green as you don't have anything showing on screen right now.
Regards,
Wovens
Click to expand...
Click to collapse
Thanks guys. very VERY much appreciated!!!
I'll try to find someone with XP (I'm not confident enough to start messing with the SD card, so I'll try XP first).... keep your fingers crossed for me!
Thanks again,
MissG
x
IF there's a will there's a way...
Although i had flashed my ROM under Vista i am not going to recommend it because of the hassle of reinstalling the old driver for your exec, and the process is just a pain but it's worth it once you've done it. Try XP. But if it will not work check and read the whole wiki of Universal and am sure the answer you are looking for will be there. By the way can you go on the bootloader mode? perhaps you can try the mtty utility under 'How to upgrade your ROM' in the Universal WIKI.
Hi MissG, I recently resurrected my old Exec and had the same problem (trusting Vista Ultimate), I thought I had bricked the Exec but then read the wiki and found this:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I know you think the screen is blank but look very very closely and hopefully you will see that it is in fact showing the v. as in the screenshot, if so then follow this and praise be to Xda Developers - good luck
Cheers
Wicksie
Lost hope?
wicksie said:
Hi MissG, I recently resurrected my old Exec and had the same problem (trusting Vista Ultimate), I thought I had bricked the Exec but then read the wiki and found this:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I know you think the screen is blank but look very very closely and hopefully you will see that it is in fact showing the v. as in the screenshot, if so then follow this and praise be to Xda Developers - good luck
Cheers
Wicksie
Click to expand...
Click to collapse
OMG! You're right. I actually did read that on wiki yesterday and tried it, but couldn't see anything.
So I just gave it another go (just in case) and it is there. Incredibly faint and small I can't read what it says, but I can see that there is some writing there.
So, all is not lost then?
I've had no luck finding an XP machine yet though, so I may have to resort to partitioning my machine here (which I don't really want to do... knowing my luck recently, I'll also have to join several other forums to fix my PC!)
God bless the internet, God bless forums like these, God bless all of the people that help
It's like having a complete library in my bedroom.
Thanks again, and thanks so much for all of your help. I'll let you all know how I get on with it.
MissG
x
MissGuided said:
OMG! You're right. I actually did read that on wiki yesterday and tried it, but couldn't see anything.
So I just gave it another go (just in case) and it is there. Incredibly faint and small I can't read what it says, but I can see that there is some writing there.
So, all is not lost then?
I've had no luck finding an XP machine yet though, so I may have to resort to partitioning my machine here (which I don't really want to do... knowing my luck recently, I'll also have to join several other forums to fix my PC!)
God bless the internet, God bless forums like these, God bless all of the people that help
It's like having a complete library in my bedroom.
Thanks again, and thanks so much for all of your help. I'll let you all know how I get on with it.
MissG
x
Click to expand...
Click to collapse
Just don´t give up!
You have one of the best devecies ever made to date
I´m sure you´ll have great fun with Uni!
Don´t forget to vote for it!
I am offering my help to fix it for you,you will have to post it to me. PM me if its ok with you
MissGuided said:
OMG! You're right. I actually did read that on wiki yesterday and tried it, but couldn't see anything.
So I just gave it another go (just in case) and it is there. Incredibly faint and small I can't read what it says, but I can see that there is some writing there.
So, all is not lost then?
I've had no luck finding an XP machine yet though, so I may have to resort to partitioning my machine here (which I don't really want to do... knowing my luck recently, I'll also have to join several other forums to fix my PC!)
God bless the internet, God bless forums like these, God bless all of the people that help
It's like having a complete library in my bedroom.
Thanks again, and thanks so much for all of your help. I'll let you all know how I get on with it.
MissG
x
Click to expand...
Click to collapse
Hi,
Some guy in another thread said he's managed to flash his Uni using an XP emulator inside Windows 7! It also works for Vista. See link: http://forum.xda-developers.com/showthread.php?t=481205
olympia786 said:
I am offering my help to fix it for you,you will have to post it to me. PM me if its ok with you
Click to expand...
Click to collapse
A HUGE thank you to OLYMPIA786 for going above and beyond the call of duty!
I'm a very happy little girl now and my b/f doesn't have to sleep in the shed any more
It was a real pleasure.
Out of pure idle curiosity - what was the actual issue in the end?
nothing big, same old vista compatibility problem, i flashed it with XP and it gone through the very first time.
Olympia786 did my Exec as well - a stunning job!! There are times I hate Vista and this was one of them!
I have got vista ultimate on dvd but never installed on my laptop.don't want to take risk with my universal.I didn't like the vista to be very honest,too complicated and not user friendly.happy with XP.
Problem just started on my Uni.
SD card will no longer stay in. I can hear the little click (though it doesn't sound as positive as it did) as it goes in, but it doesn't stay there - just springs out.
Anyone ever experienced this before?
Better still, anyone have a fix?
The Uni is useless to me without it.
Thanks.
kryogenik said:
Problem just started on my Uni.
SD card will no longer stay in. I can hear the little click (though it doesn't sound as positive as it did) as it goes in, but it doesn't stay there - just springs out.
Anyone ever experienced this before?
Better still, anyone have a fix?
The Uni is useless to me without it.
Thanks.
Click to expand...
Click to collapse
Maybe you already done this: Have you tried with another sd card?
Still same?
If yes try to see inside to confirm that nothing is broken at simple view
I´m sure someone will come with a wiser sollution
Good luck,
orb3000 said:
Maybe you already done this: Have you tried with another sd card?
Still same?
If yes try to see inside to confirm that nothing is broken at simple view
I´m sure someone will come with a wiser sollution
Good luck,
Click to expand...
Click to collapse
Hi - thanks for the reply. I've found replies are few and far between sometimes..
Yes, I've tried other cards. This latest one (the one I *think* may have broken it) is a legitimate 8GB card bought from a reputable high street store. A waste of damn time anyway because the Uni will only see 4GB of it, depsite doing something to make it see more not long ago (I forget what it was). I Googled the expansion slot problem and found a quick-fix. Add a layer or two of Scotch tape. The card becomes thicker and 'stays' in the slot. It works very well, but it's not my ideal long-term fix.
All that said, my brand new Universal arrived this morning (£60 GBP would you believe..) so I guess now I'll be reading up on how to flash the ROM.
I haven't flashed firmware on a Windows handset since my HTC Canary 7 years ago..
kryogenik said:
Hi - thanks for the reply. I've found replies are few and far between sometimes..
Yes, I've tried other cards. This latest one (the one I *think* may have broken it) is a legitimate 8GB card bought from a reputable high street store. A waste of damn time anyway because the Uni will only see 4GB of it, depsite doing something to make it see more not long ago (I forget what it was). I Googled the expansion slot problem and found a quick-fix. Add a layer or two of Scotch tape. The card becomes thicker and 'stays' in the slot. It works very well, but it's not my ideal long-term fix.
All that said, my brand new Universal arrived this morning (£60 GBP would you believe..) so I guess now I'll be reading up on how to flash the ROM.
I haven't flashed firmware on a Windows handset since my HTC Canary 7 years ago..
Click to expand...
Click to collapse
Well hope you can solve the issue!
Good to hear that you have a new Uni!!
May I know where you´ve got that great deal? and if possible I would like to buy one!
For flashing instructions read here: http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
And personally I recommend you Tomal v.8.5 the fastes and stable 6.1!
Good luck!
Hi again.
It was a UK eBay "Buy It Now" offer.
I was browsing Uni/Exec/SPV etc and refreshing waiting for a particular auction to end when this one just popped up with charger, new battery, leather case and 3 x stylus. It looks/smells brand new. Incredibly lucky I know.
Thanks for the advice on the ROM. I'm just reading through where/how/why and whatnot now. I have a G3 device so I think I can just go ahead and flash.
But as I say, I'm reaqding through the Wiki and the threads. I have seen others mention Tomal's ROM. I'm looking for as Vanilla as possible. This unit for me will ideally run TCMP as best as it can and Vijay's FullScreen along with terminal services. Everything else is a very distinct second priority. I have a Wizard I use for TomTom and a Nokia N95 for an everyday phone. This just needs to be a media player and a remote access unit for my desktop machine. Apart from a file explorer, I could pretty much do without everything else.
Thanks again.
Orb, that Wiki entry needs updating somewhat. There's loads of issues not covered there. The Tomal is a single installer and presumably doesn't need the programs mentioned (though it briefly mentions that at the end). There should be a distinction made there. Some ROM's need these programs, some are single installers, if so ... ... ... ... etc. Not some half-assed brief mention with no other instructions. I presume I just double click the installer in Bootloader and leave it to it???
It says I need to CID/EROM unlock but fails to explain what these are?! More searching shows that it's extended ROM and SIM lock that need removing. What point is there using acronyms for a supposed 'newbie' tutorial..
My unit won't run the EROM program complaining of needing a new NET framework.
This isn't mentioned. Not that you may get this error, what it is, or what you need to do if you do.
The SIM unlock won't run either. Once my unit is in bootloader mode and showing 'serial' I plug in the USB lead and it shows 'USB'. I run the SIM unlocker and it eventually says 'this is not for your device'. More searching and I find I need to be using XP to do this, not Windows 7 or Vista.
Searching about I see loads of people with similar problems. If the Wiki was updated, then when people pointed users to it, then it would do it's job (which is presumably to help people and prevent the forum being full of questions, which it obviously is..).
Looks like I need to get onto an XP machine and do some serious searching through the sometimes 50 page long threads before I risk bricking my Uni.
I'm more than happy to do research if that's what I need to do, but what's the point in promoting a Wiki if you have to ignore half of what it says and find out for yourself anyway?
Not a rant at you by the way. Just a post made from observations.
Cheers.
Hi kryogenik!
I completely agree with you. My Uni came to me from uk with WM6.0, so I supposed it was unlocked and I made various flashes with no fear.
With a friend of mine Uni things were different: it had a stock WM5 and I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
@orb3000: when a newbie comes here asking for instruction on how to flash you always make a ctrl+c ctrl+v with wiki link... Why don't you try reading it with "newbie's eyes"? As kryogenik said, I won't attack you, it's just my thought...
Cheers...
kryogenik said:
Orb, that Wiki entry needs updating somewhat. There's loads of issues not covered there. The Tomal is a single installer and presumably doesn't need the programs mentioned (though it briefly mentions that at the end). There should be a distinction made there. Some ROM's need these programs, some are single installers, if so ... ... ... ... etc. Not some half-assed brief mention with no other instructions. I presume I just double click the installer in Bootloader and leave it to it???
It says I need to CID/EROM unlock but fails to explain what these are?! More searching shows that it's extended ROM and SIM lock that need removing. What point is there using acronyms for a supposed 'newbie' tutorial..
My unit won't run the EROM program complaining of needing a new NET framework.
This isn't mentioned. Not that you may get this error, what it is, or what you need to do if you do.
The SIM unlock won't run either. Once my unit is in bootloader mode and showing 'serial' I plug in the USB lead and it shows 'USB'. I run the SIM unlocker and it eventually says 'this is not for your device'. More searching and I find I need to be using XP to do this, not Windows 7 or Vista.
Searching about I see loads of people with similar problems. If the Wiki was updated, then when people pointed users to it, then it would do it's job (which is presumably to help people and prevent the forum being full of questions, which it obviously is..).
Looks like I need to get onto an XP machine and do some serious searching through the sometimes 50 page long threads before I risk bricking my Uni.
I'm more than happy to do research if that's what I need to do, but what's the point in promoting a Wiki if you have to ignore half of what it says and find out for yourself anyway?
Not a rant at you by the way. Just a post made from observations.
Cheers.
Click to expand...
Click to collapse
Yeah, as dear Admin said "Wiki is a strange place"
Why not try to post this request on the proper place on general section
"request to mods by users"
I think that will be the place to have an answer
Cheers,
Auzman said:
I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Click to expand...
Click to collapse
Exactly. There are some very odd ideas about what a tutorial is.
I'm hardly a newbie myself, but when there's something so valuable at risk it obviously makes sense for things to be right? Why bother otherwise.
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
Click to expand...
Click to collapse
Well, I've got the extended ROM showing. I can understand that needing to be done - perhaps the new ROM needs it writable. I can't for the life of me imagine why the unit needs to be SIM unlocked though?? I have seen posts from people who have SIM unlocked AFTER a ROM flash so I'm thinking perhaps this isn't the case?
Did you do either of these? Or maybe your unit was already in this state?
orb3000 said:
Yeah, as dear Admin said "Wiki is a strange place"
Why not try to post this request on the proper place on general section
"request to mods by users"
I think that will be the place to have an answer
Click to expand...
Click to collapse
Thanks Orb. But it's not a request. I have a feeling it wouldn't be acted upon anyway. I can't be the first to point out inconsistencies.
I run a website and Vbulletin forum too. The day I have to rely on someone else to tell me it's not right is the day I give it up.
It sounds like I'm bashing XDAD. I'm really not. It's been a lifeline for me numerous times (the forum I must stress, not the WIKI).
I'm just surprised that such a fantastic resource is being let down by the one thing it should be proud of.
Auzman said:
Hi kryogenik!
I completely agree with you. My Uni came to me from uk with WM6.0, so I supposed it was unlocked and I made various flashes with no fear.
With a friend of mine Uni things were different: it had a stock WM5 and I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
@orb3000: when a newbie comes here asking for instruction on how to flash you always make a ctrl+c ctrl+v with wiki link... Why don't you try reading it with "newbie's eyes"? As kryogenik said, I won't attack you, it's just my thought...
Cheers...
Click to expand...
Click to collapse
I also was a newbie sometime, and I found that if everybody gives me easyly all my questions and problems I will not learn never! and I will get used to demand that people has to give me the answer right away!
So no my friend, I understand is not an attack and I´m also friendly:
But said that I´ll push newbies to do it by themselves, even if it´s a little bit more difficult
At the end they as me wil apreciate it, because we learn to SEARCH and READ
lol.
Cute idea but there's a big difference between encouraging someone to help themselves and pointing them to articles that do the exact opposite to what they're supposed to do (i.e. confuse rather than assist).
Everyone needs to start somewhere, but you NEED to have at least some correct and up to date information to send you on your way.
You wouldn't give someone a manual for a 1972 Ford and tell them to read it so they can fix their 2009 model.
Anyway, that's my opinion on it. I hope one day someone has time to add missing bits to the Wiki. I appreciate it could be a major task. As I said, essentially this will save on hundreds of people posting the same problems over and over again and people getting sick of replying to the same posts over and over again.
It's simple common sense.
OUT
Agree mate
I´ll try to find out how we can update the Wiki
Have a good day
Ok since I upgraded to the 2.1 myphone has been having major problems almost to the point where I cant use it anymore. I have done a factory reset 3 times and still hasnt fixed the problems. I did do the upgrade over the air, what I need to know is, is there anyway I can downgrade back to the 1.5 or manually re upload the 2.1 version to see if it fixes my problems. Thank you.
what is exactly wrong with your phone that is making it unusable?
There is no current way to downgrade 2.1 to 1.5, even with OTA update, unless you would like to flash the root image, then downgrade back to regular 1.5... Also we may be able to better assist you if you explain the issues you are having with your phone a little better.
The issues I am having are text app force closes all the time, mostly when the phone itself is charging. I dont receive texts a lot, I have to *228 frequently through out the day. When I am at the homescreen the pages will slide all the way to the left and stay there the only way I can get back to anywhere is to either do a soft reset or long press the home key to go to another app. The biggest problem though is the texting and like i said it mostly just happens when the phone is charging. But the keyboard will seriously lag, force close...the cursor jumps to the begining of whatever i am saying or just randomly go to the left and mix all my words up.
have you installed any apps or do you use any widgets? are you using the sense home launcher?
i have not installed any apps since the 3rd time i did the factory reset, and i have no idea about the other question.
It sounds to me like there was some corruption with your OTA update. I would venture to say that you have two options here:
1. Take your Eris into Verizon and have them replace it.
or
2. Root your Eris and enjoy the many available roms here.
*Standard disclaimer: I am not responsible for what you do to your device, it is your choice to do whatever you please...*
why don't you just go into the verizon wieless store and tell them what is happening and they will give you a replacement. i had slight wifi issues so i went there and they gave me a new phone on the dot! they might make you do some factory resets and such there also
yeah thats what i think too..but since i did the over the air update to the 2.1 i didnt think I could do any roots or whatever. I am not that knowledgable when it comes to the roots or any of that. I would like to do that so I can fix my phone and actually use it. Can you please provide me with step by step instructions on how to do that.
ok i am not responsible for this but here is the link to the instructions:http://androidforums.com/all-things-root-eris/53963-guide-stock-1-5-latest-root-2-1-a.html
also this will void your warranty so you can't get a free replacement from verizon after you root
update: these are instructions for windows if you search around you can find instructions for linux and mac (i rooted on a mac so if you need help PM me and i will respond when i can (i am not an expert))
ok so once i dothe root or whatever will my contacts still sync with google?? I cant get a replacement phone anyhow because I bought this phone from a private owner, but I did not have problems with it until right after I did the upgrade a few weeks after I bought the phone.
naenaek22 said:
yeah thats what i think too..but since i did the over the air update to the 2.1 i didnt think I could do any roots or whatever. I am not that knowledgable when it comes to the roots or any of that. I would like to do that so I can fix my phone and actually use it. Can you please provide me with step by step instructions on how to do that.
Click to expand...
Click to collapse
Here is a link to a thread that will take you through the root process. These guys, ECLIPS3 and Jamezelle, know their stuff! They even made an app to do the hard part.
http://forum.xda-developers.com/showthread.php?t=661413
naenaek22 said:
ok so once i dothe root or whatever will my contacts still sync with google?? I cant get a replacement phone anyhow because I bought this phone from a private owner, but I did not have problems with it until right after I did the upgrade a few weeks after I bought the phone.
Click to expand...
Click to collapse
Yes, you can still sync with Google. (Did someone say g00gl3?) Lolz
Anyhow, just do some research as you choose which rom to load. Every rom has it's own features and charateristics. Also, make sure to create Nandroid backups whenever flashing from rom to rom just in case of issues. Good luck!
ok since i am very illiterate about the whole rom thing and all that..can you please in your opionion tell me which way to go?? I wont hold anything against you I just want to be able to use my freakin phone. I dont really care about the techy stuff as long as i can use the apps and text and make calls I am good. I looked at the link you provided "google" lol..and i am not sure quite how to do it. I know i am being a big pain right now I just dont want to mess my phone up.
actually the jumpy screen while charging thing is pretty common I believe its a hardware issue though...its my belief the mini usb connecter on the eris is shoddy
plug in the charger and wiggle it you may notice the connetor is not properly fastened to the phone
fyi DO NOT hold the phone up or horizontial by the usb plug...my wife did that to both our phones and ever since then it will flake out
a quick fix would be to plug in wiggle it and unplug you want the mini usb connector back in alignment
naenaek22 said:
ok since i am very illiterate about the whole rom thing and all that..can you please in your opionion tell me which way to go?? I wont hold anything against you I just want to be able to use my freakin phone. I dont really care about the techy stuff as long as i can use the apps and text and make calls I am good. I looked at the link you provided "google" lol..and i am not sure quite how to do it. I know i am being a big pain right now I just dont want to mess my phone up.
Click to expand...
Click to collapse
No worries - everyone is hesitant at first - no one wants to brick their phone...
What kind of computer do you use; Windows, Mac, or Linux? This is important for following the root procedure.
I still believe the EMA app that I linked is your best bet. It handles the tough command line tasks for you.
As for a rom, you can see by my signature that I prefer Sense-able 3.1 from Jamezelle. But I also really like Evil Eris 2.0.1 by Framework43.
I would probably suggest Sense-able 3.1 for you because it is based on an Eris build. I have found it to be very stable and doesn't really need any tweaks to run well.
*Just wanted to note that I am in no way knocking any other roms or devs on these boards. Thank you to all the talented devs out there for all the work you do!!!*
i downloaded the sensible rom..as far as the app goes how do I go about getting that or whatever?? I am running windows..but the sensible rom file is downloaded to my desk top i havent done anything with it yet beings that I dont have a clue as to what I am doing lol..
naenaek22 said:
ok since i am very illiterate about the whole rom thing and all that..can you please in your opionion tell me which way to go?? I wont hold anything against you I just want to be able to use my freakin phone. I dont really care about the techy stuff as long as i can use the apps and text and make calls I am good. I looked at the link you provided "google" lol..and i am not sure quite how to do it. I know i am being a big pain right now I just dont want to mess my phone up.
Click to expand...
Click to collapse
use the app that jamezelle and i made. its super simple. were always on the irc server if you need help. chat.andirc.net
i am working on downloading it now, i am downloading the net 4 thing ..but i am going into this blind..
naenaek22 said:
i am working on downloading it now, i am downloading the net 4 thing ..but i am going into this blind..
Click to expand...
Click to collapse
Just download the EMA app and use it. The thread has instructions to use it. Just read the part about pre-requisites to install the needed software. Then run EMA and follow the center column of 4 commands. Thats really all there is to it.
Like I said earlier, ECLIPS3 and Jamezelle do great work and are willing to provide help. As he said above...
Hello
Before you ask, I have searched high and low for a solution for this, trying different attempts, so here is my thread. If you find or know of another thread with the magic solution, please link me and I will thank you eternally
Me and my girlfriend have just got back from holiday and I broke the screen whilst we were away. I need to recover the data from the sdcard as it has all our holiday photos.
It is the LG Nexus 4, running the latest, STOCK, untouched Android 4.2.2.
Potential Problems
Mobile Data & WiFi is disabled - holiday so they were turned off
Screen touch / digitizer does not work
Stock Android 4.2.2
USB debugging is OFF
There's a daily alarm set which is p** me off!
Please, any suggestions?
Thanks, Josh.
As an update to this, Wi-Fi IS turned on, so I can use the online playstore to update an app, but cannot use the touchscreen and so access the app etc.
Josh
jleafe said:
Hello
Before you ask, I have searched high and low for a solution for this, trying different attempts, so here is my thread. If you find or know of another thread with the magic solution, please link me and I will thank you eternally
Me and my girlfriend have just got back from holiday and I broke the screen whilst we were away. I need to recover the data from the sdcard as it has all our holiday photos.
It is the LG Nexus 4, running the latest, STOCK, untouched Android 4.2.2.
Click to expand...
Click to collapse
Untouched device with USB Debugging off. No way to crack this (as far as I know). A very similar issue, but still no solution. You may read this, or this.
To unlock, simply get your touchscreen fixed. No other way. Sorry mate.
Far_SighT said:
Untouched device with USB Debugging off. No way to unlock this except using your google account (as far as I know). A very similar issue, but still no solution. You may read this, or this.
To unlock, simply get your touchscreen fixed. No other way. Sorry mate.
Click to expand...
Click to collapse
Thanks. Great news - the phone is insured, but if I take the SD card out or do the touchscreen myself, it will invalidate the insurance. It's not just the front touchscreen which is broken, the back is shattered also.
Josh
Wow. Can't believe there's no way to do this. Thanks for the help those who have read this but also, cannot help!
Josh
jleafe said:
Wow. Can't believe there's no way to do this. Thanks for the help those who have read this but also, cannot help!
Josh
Click to expand...
Click to collapse
As long as you replace the screen by yourself all the data will be saved. Screen replacement is very easy and is much cheaper than paying LG
Sent from my Nexus 4 using xda app-developers app
Teenage son swam with his one month old LG G2. Ouch.
Used reviveaphone liquid as only 12 quid and worth a try. I'm amazed but it actually seems to have worked, except I think in water shorting the phone we've lost the root because on the firmware update screen I get a message "920K 8100 Unrooted" appearing in a rectangular box at bottom of screen.
I'm a little computer savvy but know nothing about mobile roots. I imagine this is the built in Rom that fires everything up which has got corrupted by the water. I realise I might be wasting my time and it may be fried but being only one month old I want to give it a good try before binning it.
I don't want any hacked rom or anything complicated just want original rom restored if possible?
I expect there's a sticky that someone can link me to? I'm not completely sure which model I have but the back is off and maybe there's some identifier in there?
Sorry to sound terribly dim! Any help most gratefully received!
If you do reply can you please bear in mind I know none of the technical terms! Thanks
Okay, so the device is working? Does it boot into a workable mode or are you only getting that box with unrooted text? That doubts like you're in download mode.
Without knowing which variant you have, this is going to be tough. Start with this thread: http://forum.xda-developers.com/showthread.php?t=2705259
That should link you to everything you need to know to get back to stock rom.
This link will take you to a thread which will use a program on Windows to get back to stock rom as well.
http://forum.xda-developers.com/showthread.php?t=2432476