Have I Got A Very Expensive Brick? - JASJAR, XDA Exec, MDA Pro General

Hi Guys/Gals,
I'm VERY new to all of this, as far as I was concerned, FLASHING was a bloke in a dirty mackintosh!
I do hope that I'm posting this in the right section (like I said I'm new to all this)
I have (had) an O2 XDA Exec, it had WM5 on it, and my (idiot) boyfriend decided that I should have WM6. I trusted him to do this (I know, I'm too trusting too ). During the installation, using active sync, Vista decided that it knew better and everything went kapput!
I'm sorry that I can't desribe it in your techie speak.
All I have now is a blank screen, and when I plug it in to charge the red light comes on.
ANY and all help would be VERY VERY much appreciated.... and if I may, could I ask that any help is described to me as if you were talking to a 10 year old?
Many, many thanks.
MissGuided
x

Hope Not
Check and read the WIKI for Universal and am pretty sure you can find some answer in there. I nearly bricked my Exec once but every information i needed is in the WIKI. By the way is there anything on the screen? Have you tried doing a hard reset?

Where to start?
Thanks Sandi76,
There is nothing on the screen at all, I've tried doing a soft reset and a hard reset and still nothing.
I'm looking at Wiki now, but I honestly don't know where to start. It must be the blonde (natural of course ) in me!
So, if someone could just help me to get started, it would be appreciated.
....and my boyfriend will be very happy about not having to sleep in the shed!
Thanks again,
MissG
x
PS. I'm not going to let him touch my phones EVER again!

There is hope!
MissGuided said:
Hi Guys/Gals,
I'm VERY new to all of this, as far as I was concerned, FLASHING was a bloke in a dirty mackintosh!
...I have (had) an O2 XDA Exec, it had WM5 on it, and my (idiot) boyfriend decided that I should have WM6. I trusted him to do this (I know, I'm too trusting too ). During the installation, using active sync, Vista decided that it knew better and everything went kapput!
I'm sorry that I can't desribe it in your techie speak.
All I have now is a blank screen, and when I plug it in to charge the red light comes on.
ANY and all help would be VERY VERY much appreciated.... and if I may, could I ask that any help is described to me as if you were talking to a 10 year old?
Many, many thanks.
MissGuided
x
Click to expand...
Click to collapse
Hi,
I think the first big problem is Vista. I've heard that Vista is not friendly to the ROM updating process. I may be wrong and somebody may have solved this but I would suggest that you get hold of a computer with XP in it to try to restart the updating process.
Second, can you put the phone in bootloader state? (press the two option buttons and reset hole at the same time) If so, you can flash your ROM again. I know, i know, to press the three at the same time you need a bit of help...maybe your bf can help with this...

Never again!
Thanks so much Wovens,
I've tried the reset to factory settings and pressed the 0 key, and it just says Clearing..., goes off and then nothing happens.
(I must have very long fingers because I can do it myself, and my b/f needs never come near my phone EVER again!)
I'll have to search about for someone with XP. I think that all my friends use Vista???
Do you think that finding an XP machine is my first step?
Thanks guys... I REALLY do appreciate your help you know?
MissG
x

i stumbled accross your post and thought i'd try to help as ive flashed a hermes, artemis, magician, universal and more using xp and never had any problems. i would give xp a try before giving up

Some more info
MissGuided said:
Thanks so much Wovens,
I've tried the reset to factory settings and pressed the 0 key, and it just says Clearing..., goes off and then nothing happens.
(I must have very long fingers because I can do it myself, and my b/f needs never come near my phone EVER again!)
I'll have to search about for someone with XP. I think that all my friends use Vista???
Do you think that finding an XP machine is my first step?
Thanks guys... I REALLY do appreciate your help you know?
MissG
Click to expand...
Click to collapse
Hi again,
if you only have Vista, read this: http://forum.xda-developers.com/showthread.php?t=292631 it may help.
Again, I would do it with XP. It may be that something got partially flashed when b/f tried, so, factory settings will not work because they are not there any more. You will need to flash again. There is also, if I remember correctly, a way of flashing via SD card that bypasses the computer process. But you would need the phone fully charged or till battery light shows green as you don't have anything showing on screen right now.
Regards,
Wovens

Ain't no stoppin' us now
WOOHOO! I've just figuerd out how to quote! There's no stopping me now
professormark said:
i stumbled accross your post and thought i'd try to help as ive flashed a hermes, artemis, magician, universal and more using xp and never had any problems. i would give xp a try before giving up
Click to expand...
Click to collapse
wovens said:
Hi again,
if you only have Vista, read this: http://forum.xda-developers.com/showthread.php?t=292631 it may help.
Again, I would do it with XP. It may be that something got partially flashed when b/f tried, so, factory settings will not work because they are not there any more. You will need to flash again. There is also, if I remember correctly, a way of flashing via SD card that bypasses the computer process. But you would need the phone fully charged or till battery light shows green as you don't have anything showing on screen right now.
Regards,
Wovens
Click to expand...
Click to collapse
Thanks guys. very VERY much appreciated!!!
I'll try to find someone with XP (I'm not confident enough to start messing with the SD card, so I'll try XP first).... keep your fingers crossed for me!
Thanks again,
MissG
x

IF there's a will there's a way...
Although i had flashed my ROM under Vista i am not going to recommend it because of the hassle of reinstalling the old driver for your exec, and the process is just a pain but it's worth it once you've done it. Try XP. But if it will not work check and read the whole wiki of Universal and am sure the answer you are looking for will be there. By the way can you go on the bootloader mode? perhaps you can try the mtty utility under 'How to upgrade your ROM' in the Universal WIKI.

Hi MissG, I recently resurrected my old Exec and had the same problem (trusting Vista Ultimate), I thought I had bricked the Exec but then read the wiki and found this:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I know you think the screen is blank but look very very closely and hopefully you will see that it is in fact showing the v. as in the screenshot, if so then follow this and praise be to Xda Developers - good luck
Cheers
Wicksie

Lost hope?
wicksie said:
Hi MissG, I recently resurrected my old Exec and had the same problem (trusting Vista Ultimate), I thought I had bricked the Exec but then read the wiki and found this:
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I know you think the screen is blank but look very very closely and hopefully you will see that it is in fact showing the v. as in the screenshot, if so then follow this and praise be to Xda Developers - good luck
Cheers
Wicksie
Click to expand...
Click to collapse
OMG! You're right. I actually did read that on wiki yesterday and tried it, but couldn't see anything.
So I just gave it another go (just in case) and it is there. Incredibly faint and small I can't read what it says, but I can see that there is some writing there.
So, all is not lost then?
I've had no luck finding an XP machine yet though, so I may have to resort to partitioning my machine here (which I don't really want to do... knowing my luck recently, I'll also have to join several other forums to fix my PC!)
God bless the internet, God bless forums like these, God bless all of the people that help
It's like having a complete library in my bedroom.
Thanks again, and thanks so much for all of your help. I'll let you all know how I get on with it.
MissG
x

MissGuided said:
OMG! You're right. I actually did read that on wiki yesterday and tried it, but couldn't see anything.
So I just gave it another go (just in case) and it is there. Incredibly faint and small I can't read what it says, but I can see that there is some writing there.
So, all is not lost then?
I've had no luck finding an XP machine yet though, so I may have to resort to partitioning my machine here (which I don't really want to do... knowing my luck recently, I'll also have to join several other forums to fix my PC!)
God bless the internet, God bless forums like these, God bless all of the people that help
It's like having a complete library in my bedroom.
Thanks again, and thanks so much for all of your help. I'll let you all know how I get on with it.
MissG
x
Click to expand...
Click to collapse
Just don´t give up!
You have one of the best devecies ever made to date
I´m sure you´ll have great fun with Uni!
Don´t forget to vote for it!

I am offering my help to fix it for you,you will have to post it to me. PM me if its ok with you

MissGuided said:
OMG! You're right. I actually did read that on wiki yesterday and tried it, but couldn't see anything.
So I just gave it another go (just in case) and it is there. Incredibly faint and small I can't read what it says, but I can see that there is some writing there.
So, all is not lost then?
I've had no luck finding an XP machine yet though, so I may have to resort to partitioning my machine here (which I don't really want to do... knowing my luck recently, I'll also have to join several other forums to fix my PC!)
God bless the internet, God bless forums like these, God bless all of the people that help
It's like having a complete library in my bedroom.
Thanks again, and thanks so much for all of your help. I'll let you all know how I get on with it.
MissG
x
Click to expand...
Click to collapse
Hi,
Some guy in another thread said he's managed to flash his Uni using an XP emulator inside Windows 7! It also works for Vista. See link: http://forum.xda-developers.com/showthread.php?t=481205

olympia786 said:
I am offering my help to fix it for you,you will have to post it to me. PM me if its ok with you
Click to expand...
Click to collapse
A HUGE thank you to OLYMPIA786 for going above and beyond the call of duty!
I'm a very happy little girl now and my b/f doesn't have to sleep in the shed any more

It was a real pleasure.

Out of pure idle curiosity - what was the actual issue in the end?

nothing big, same old vista compatibility problem, i flashed it with XP and it gone through the very first time.

Olympia786 did my Exec as well - a stunning job!! There are times I hate Vista and this was one of them!

I have got vista ultimate on dvd but never installed on my laptop.don't want to take risk with my universal.I didn't like the vista to be very honest,too complicated and not user friendly.happy with XP.

Related

upgrading my o2 xda to wm6 or B&B ? Help?

Hello all,
I've been following the upgrade to wm6 on this site for a while now, and i've been following the 'idiots guide' to upgrading.
I've followed the guide to a T, but for an unknown reason it doesn't upgrade only to show as an error 260.
I'm using windows vista, i have checked all the usb ports and re-connected to other ports to make sure it was connected correctly. The icon shows green bottom right of taskbar, and all seems fine until i go through the motions i get the red green blue screen with usb in bottom left of screen sometimes i get to go as far as the bar saying 2/3% updating then it all goes pear shaped. I've used the start_uspl application, and also the official rom from htc to no avail.
Luckily i've not bricked the xda yet.
Would anyone have idea's as to what i'm doing wrong? Many thanks
Try reading this. Might help. And use search next time, plz.
http://forum.xda-developers.com/showthread.php?t=317589
Vista woes
Like you I had no success in flashing on a Vista Machine. When I took myself to an XP PC the problem vanished and it worked like a dream. I am now running the HTC WM6 ROM with no problems.
tehcrash said:
Try reading this. Might help. And use search next time, plz.
http://forum.xda-developers.com/showthread.php?t=317589
Click to expand...
Click to collapse
Well you're clever aren't you! One post and and you're a total wizard.
For your info, i've been through many a posts and search many a threads re this topic.
But thanks for the sarcasim, and the link.
I'm sorry if you found my post sarcastic. I didn't had this in my mind. I have Vista as well, and i spend one night full of curses and swears to flash my Artemis. It was unforgettable experience
Anyway, no offence and good luck with flashing

broken camera kjam

I believe my camera is broken - black screen. I'm not sure but I think it's happened after I upgraded to wm6.
Does anyone had the same problem and was able to fix it or the hardware is ****ed up and there's nothing to do?
Thanks
no....
honestly I don't believe that an upgrade to wm6 can "break" your camera...
... and then there is a simple test that you can try: come back to the original shipped i-mate rom (ftp://ftp.clubimate.com) and you see what happens.
but.... why don't you give us some more infos?
like: is a G3/G4 locked or unloked, IPL/SPL version...
hi
tommy
well, I did that. I restore the original rom and the camera still didn't work.
My phone is G3 locked and I installed on top wm6 from faria (a nice one!).
Of course it could just be that my camera gave up. Since I was not using it regularly and at some point after the upgrade to wm6 I saw the problem it was one of the link.
Can the hardware of the camera be affected by the overclocking?
hey~
i think i may have a similar problem (but the explination doesn't go in to deep detail)
when i try to snap a picture, about half the time it will snap....half the time it just goes black (the screen) and no matter what....it WILL NOT SAVE the photo.
i've tried changing where it saves the photos (main memory or sd card) as well as changed all the settings one by one (megapixels, fine:super fine, snapping type [full press etc] etc. etc. etc. i also tried changing settings via the advance config tool often mention onthe forums)
i haven't updated the rom (stock at&t rom is installed....i'm savy but not savy enuf to change the rom lol) nor have i updated windows (it always gives me an error...says it cant connect to the server or something, oh well i don't much care for micro$ucks anyways lol)
it's running windows 6.1 professional...i have plenty of memory free and hadn't installed anything new or tweaked any settings the day it stoped working....
any ideas?
~j
ps.
oh yeah, oddly...the video record function still works....
Camera might be out of the connecting socket - open your device and make sure it's connected. Failing that - the replacement cameras can be purchased fairly cheaply.
thanks i'll give that a try and let ya know if it works!
i appreciate the very fast reply it's nice to know im not the only insomniac out there lol
~j
Moved since problem is not ROM related.
ubuntujason said:
thanks i'll give that a try and let ya know if it works!
i appreciate the very fast reply it's nice to know im not the only insomniac out there lol
~j
Click to expand...
Click to collapse
Haha, I am 18 hours or so ahead of you.
thank you and sorry i placed my question in the wrong area....where has it been moved to though? :s (while ive been a member her for a while, i am still new to posting...ill admit i usually read...but i hope to change that )
~j
No worries. Let us know when you get it fixed and how.
hey all~
enigma....now i see it's enigmaNZ so new zeeland i assume is where you are....so maybe im a lone insomniac lol
jwzg....thanks again
all....as to the suggestion of opening the phone case....well with my nerve disease i'm going to have to have a friend do that since my hands are often no where near steady...ill let ya all know if that works.
mean time i may also look for maybe some other camera software....like i said, it will snap the photo but it refuses to SAVE the photo....so maybe the software is corrupt who knows....ill try it all
~j
hey all~
so i dove into my system registry tonite....i tweaked some things, changed the localtion of where stuff gets saved, changed some 1's to 0's an vice versa an it now seems to work....hope it remains working!
~j
Must have been a bad camera package.
jwzg~
yeah who knows, i'm just happy it's working again
~j

My wizard won't boot up....

my wizard won't boot
My wizard isn't going past the WM6 splash screeen, it gets stuck on it. I've tried soft and hard reseting a number of times as well as removing and reinserting the battery but nothing helps...
I recently flashed it with Blackdiamond 2.0 and have been using it without a single problem for the last 2 weeks or so.
Last thing I did on it last night was to use the 'Advanced Settings' in the settings menu and checked the options to make the scroll bars thinner and the scroll buttons smaller, it asked for a soft reset but since I was using it at the moment I clicked no and continued using it eventually powering it off and went to bed.
Now when I turned it on this morning it just won't go beyond the blackdiamond splash screen (pic attached)
I can't flash the rom again since activesync can't establish a connection with it(doesn't recognize that its attached with the pc, probably because the ROM never loads). I really don't know what to do... any help would be greatly appreciated
thanx
Check XDA-Wiki (top of this page) for troubleshooting guide under Wizard section
I'm not sure what is wrong with it, but it started because...I was trying to turn the bluetooth on and it wouldn't let me, so I did a soft reset, and what happens is it will just go to the loading screen for windows and stay there forever! I don't understand what happened . I've tried to reset a couple more times but it won't work...and also the power button on top doesn't work anymore.
Can anyone help me?
problem solved thanks
I just can't understand why people find more comfort in asking a question than doing a simple search and find the answer by himself. It's less time consuming and you feel a bit proud that you solved your problem on your own.
I think we should make a sticky with things like this :
"My wizard won't boot !"
"Which is the best rom ?"
"Will WM6 work on my device ? and where to find it ?"
All questions above have been asked hundreds of times, perhaps more and are still asked by almost every new guy that just registered.
how did you resolve your problem? I don't see troubleshooting anywhere...unless I"m very blind or maybe dumb.
monicaha said:
how did you resolve your problem? I don't see troubleshooting anywhere...unless I"m very blind or maybe dumb.
Click to expand...
Click to collapse
You got 2 choices :
- flash a new rom (put it into bootloader and connect it to the PC then flash)
- hard reset
anichillus said:
I just can't understand why people find more comfort in asking a question than doing a simple search and find the answer by himself. It's less time consuming and you feel a bit proud that you solved your problem on your own.
I think we should make a sticky with things like this :
"My wizard won't boot !"
"Which is the best rom ?"
"Will WM6 work on my device ? and where to find it ?"
All questions above have been asked hundreds of times, perhaps more and are still asked by almost every new guy that just registered.
Click to expand...
Click to collapse
The world is turning this way - wrong way. Too much lazzy people, too less macgyver thinking ...
anichillus said:
I just can't understand why people find more comfort in asking a question than doing a simple search and find the answer by himself. It's less time consuming and you feel a bit proud that you solved your problem on your own.
I think we should make a sticky with things like this :
"My wizard won't boot !"
"Which is the best rom ?"
"Will WM6 work on my device ? and where to find it ?"
All questions above have been asked hundreds of times, perhaps more and are still asked by almost every new guy that just registered.
Click to expand...
Click to collapse
You missed one:
Do I have a G3 or G4?
anichillus said:
You got 2 choices :
- flash a new rom (put it into bootloader and connect it to the PC then flash)
- hard reset
Click to expand...
Click to collapse
I was hoping I wouldn't have to do that, but I will try it later.
Thanks though!
jacknjill said:
You missed one:
Do I have a G3 or G4?
Click to expand...
Click to collapse
Hehe, I missed allot more
Like i said it before, why wait for an answer when you can find it for yourself. Maybe i just don't like to wait
P.S. I liked the MacGyver thing. I must admit i watched those series and i was really jealous on the guy...he knew too much
My Wizard was dead unlimited times.........,
it is easy to get life back, isn't it ?
WTF is wrong with u guys?? If its dead is dead. If the screen works, led works, the pda isnt dead. So hard to understand??

new trinity

Hi, I have just received my new (to me) SPV M700 from a guy on the internet.
It was originally locked to Orange. Has been flashed a few times by previous owner and has Ausdim on it (don't know what I'm talking about as am new to this stuff). It's been unlocked and upgraded to WM6.1, also has Tom Tom and European maps.
I put my O2 sim in and turned it on. What I got was a white screen with the words HTC, also MO5, BO5, DO3 Ausdim, and a tune played, then windows 6.1 screen came up. That's it. Nothing else happens, phone doesn't work, in fact nothing works. Oh yes, a green light at the top right hand side flashes occasionally.
Also, l had three new styli shipped from Japan. Pushed the white end onto the pen and inserted it into it's appropriate place on phone. Came to get it out and the end has come off leaving the stylus in the holder inside the machine. Oh dear. Not my day is it.
Any advice would be appreciated.
I have experience of flashing psp's and using pandora batteries so the prospect of fiddling with flashing is not totally scarey to me. But I did get to know the machine first and read a lot before trying it. Don't want to rush into such stuff with this phone if there is a simpler solution.
Cheers
Puddle
Hi guys,
I realise I may have upset people by posting a question before I have contributed anything to the forum.
Will be happy to do so when I have the phone up and running.
Here's a quick introduction......... if that's the protocol.
Am a retired aged person who loves tinkering with new technology. Was first introduced to computers with the Sinclair ZX81 which had 1k of ram, yes 1k!
I even got a 16k rampak for the back. Such wonderful technology, I also had a fiddle with machine code programming.
Then I got a Commodore 64, more fun. Later on, I got a Psion, again more programming and compiling fun. Then laterley I have a couple of pc's and a laptop. Also got recently a psp and liked it so much that I bought another one with custom firmeware on it. Have had lots of fun upgrading and such.
Just got a garmin for the car too for when we go off to France for a few months with caravan.
Just a quick introduction as to who I am. Have had a look at some of the posts and I have lots to learn. Thanks for making it happen to a golden oldie.
Cheers
Puddle ('cause my hobby is scuba diving)
Hmmm....I feel for you. My Trinity has the original wm5 rom, when I boot it up it starts with the white HTC screen you described but then kicks into windows. I doesn't sound good!
As for contributing first...don't stress about it. We all have to start somewhere
Thanks for the reply, the chap who sold me the phone is going to ring me tomorrow to see if he can sort it out.
My sim is a non 3g, is it possible that this could be the problem?
If it's something so simple I should be lucky.
I was really excited about getting the phone - a bit of a bummer that it isn't working.
Cheers
Lyv
I don't think it is the sim! Does the device boot without the sim? If not then it something deeper!
No, it is exactly the same with no sim in. Oh dear.
Perhaps it can be remedied by re flashing ??? The guy who previously flashed it may have the solution.
Cheers
Lyv
puddlediver said:
Hi, I have just received my new (to me) SPV M700 from a guy on the internet.
It was originally locked to Orange. Has been flashed a few times by previous owner and has Ausdim on it (don't know what I'm talking about as am new to this stuff). It's been unlocked and upgraded to WM6.1, also has Tom Tom and European maps.
I put my O2 sim in and turned it on. What I got was a white screen with the words HTC, also MO5, BO5, DO3 Ausdim, and a tune played, then windows 6.1 screen came up. That's it. Nothing else happens, phone doesn't work, in fact nothing works. Oh yes, a green light at the top right hand side flashes occasionally.
Also, l had three new styli shipped from Japan. Pushed the white end onto the pen and inserted it into it's appropriate place on phone. Came to get it out and the end has come off leaving the stylus in the holder inside the machine. Oh dear. Not my day is it.
Any advice would be appreciated.
I have experience of flashing psp's and using pandora batteries so the prospect of fiddling with flashing is not totally scarey to me. But I did get to know the machine first and read a lot before trying it. Don't want to rush into such stuff with this phone if there is a simpler solution.
Cheers
Puddle
Click to expand...
Click to collapse
Before thinking about reflashing, try Hard Resetting. Be warned: you will lose all data on your phone! ...but it could be a solution for your problem.
Thanks for the advice, will speak to the guy I bought it off tomorrow evening and if we don't get anywhere consider the hard reboot. (under guidance).
Regards
Lyv
Sorry.
It was my phone you bought so hello again! It's very strange that it's not getting past the Windows 6.1 splash screen even without a SIM as it was booting fine when I sent it and if it isn't getting past their even with the SIM removed then it may be something more intrinsic although I don't know what.
Hard reset the phone by pressing and holding both the soft keys and then using the stylus to reset the phone and follow the prompts, it will erase TomTom but you have all the back ups to reinstall that and I'll ring you and talk you through the process.
If the hard reset doesn't work then I'll shove a Mini SD to SD card converter in the post to you and walk you through flashing a new ROM from the memory card and if that doesn't fix it then I'm stumped and I'll give you a refund, but I'm sure it won't come to that.
Sorry for all the hassle!
Mike
Or if you're still awake feel free to ring me (don't mind returning the call to save your phone bill) and I'll try and talk you through everything now as I'll be up for an hour or two yet, you should have my phone number in the PM I sent you on YD.
Thanks for the reply Mike, would have been tucked up in bed when you posted so will speak with you tonight. Give me a bell on my landline, notified on yd site pm. I could ask a silly question.......did you load WM6.1?
Cheers
Lyv
Oh dear, all our efforts failed Looks like it's dead. Could have been dropped in transit, thank goodness for insurance.
Will have to look for another phone now.
Cheers
Lyv
not even flashing the firmware again helped ?
Soft and hard resetting does nothing. I tried connecting the device up to my pc with the usb cable but xp didn't have the drivers so can't access via that method.
Thanks for the reply anyway.
Lyv
You need to download and install Active Sync (at least version 4) before Windows XP will recognise the phone.
Get it here
Thanks IK, will download and try again. I was on an older version of activesync from when I used to use the IPAQ.
Cheers
Lyv
Upgraded my activesync to 4.5 and connected trinity. xp detected that a usb device had been added and activesync attempted to connect. At the end it gave up with a message that the connection to the windows mobile device couldn't be made.
The device itself had the red light at the top to show that it was taking power from the usb and the wm6.1 splash screen is still showing.
No joy, must be dead.
Thanks for help
Lyv
I shall be writing a long, complaining letter to Royal Mail
From what the OP has said it sounds like the phone's reset button isn't working at all as she can't get the phone to enter bootloader or hard/soft reset the phone and the only way to power it down is to remove the battery so it sounds well and truly bricked.
I'll have a play when it gets sent back to me and may ask you guys for some help sorting it but I'm not hopeful.
Hi Mike,
Money arrived in Bank account. I've posted your phone etc back to you today, special delivery, so you should get it tomorrow or Saturday at the latest.
Hope you get some joy from PO.
Cheers
Lyv
Still looking for a phone ...... ah hum, am even thinking of the mda vario II
Got a new phone on the way now - it's an xda trion. Yes, I know, not one of yours.
However, I'm sure I will get loads of fun out of it.
Over to the Hermes sub forum for me.
Cheerio
Lyv

SD Card slot.

Problem just started on my Uni.
SD card will no longer stay in. I can hear the little click (though it doesn't sound as positive as it did) as it goes in, but it doesn't stay there - just springs out.
Anyone ever experienced this before?
Better still, anyone have a fix?
The Uni is useless to me without it.
Thanks.
kryogenik said:
Problem just started on my Uni.
SD card will no longer stay in. I can hear the little click (though it doesn't sound as positive as it did) as it goes in, but it doesn't stay there - just springs out.
Anyone ever experienced this before?
Better still, anyone have a fix?
The Uni is useless to me without it.
Thanks.
Click to expand...
Click to collapse
Maybe you already done this: Have you tried with another sd card?
Still same?
If yes try to see inside to confirm that nothing is broken at simple view
I´m sure someone will come with a wiser sollution
Good luck,
orb3000 said:
Maybe you already done this: Have you tried with another sd card?
Still same?
If yes try to see inside to confirm that nothing is broken at simple view
I´m sure someone will come with a wiser sollution
Good luck,
Click to expand...
Click to collapse
Hi - thanks for the reply. I've found replies are few and far between sometimes..
Yes, I've tried other cards. This latest one (the one I *think* may have broken it) is a legitimate 8GB card bought from a reputable high street store. A waste of damn time anyway because the Uni will only see 4GB of it, depsite doing something to make it see more not long ago (I forget what it was). I Googled the expansion slot problem and found a quick-fix. Add a layer or two of Scotch tape. The card becomes thicker and 'stays' in the slot. It works very well, but it's not my ideal long-term fix.
All that said, my brand new Universal arrived this morning (£60 GBP would you believe..) so I guess now I'll be reading up on how to flash the ROM.
I haven't flashed firmware on a Windows handset since my HTC Canary 7 years ago..
kryogenik said:
Hi - thanks for the reply. I've found replies are few and far between sometimes..
Yes, I've tried other cards. This latest one (the one I *think* may have broken it) is a legitimate 8GB card bought from a reputable high street store. A waste of damn time anyway because the Uni will only see 4GB of it, depsite doing something to make it see more not long ago (I forget what it was). I Googled the expansion slot problem and found a quick-fix. Add a layer or two of Scotch tape. The card becomes thicker and 'stays' in the slot. It works very well, but it's not my ideal long-term fix.
All that said, my brand new Universal arrived this morning (£60 GBP would you believe..) so I guess now I'll be reading up on how to flash the ROM.
I haven't flashed firmware on a Windows handset since my HTC Canary 7 years ago..
Click to expand...
Click to collapse
Well hope you can solve the issue!
Good to hear that you have a new Uni!!
May I know where you´ve got that great deal? and if possible I would like to buy one!
For flashing instructions read here: http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
And personally I recommend you Tomal v.8.5 the fastes and stable 6.1!
Good luck!
Hi again.
It was a UK eBay "Buy It Now" offer.
I was browsing Uni/Exec/SPV etc and refreshing waiting for a particular auction to end when this one just popped up with charger, new battery, leather case and 3 x stylus. It looks/smells brand new. Incredibly lucky I know.
Thanks for the advice on the ROM. I'm just reading through where/how/why and whatnot now. I have a G3 device so I think I can just go ahead and flash.
But as I say, I'm reaqding through the Wiki and the threads. I have seen others mention Tomal's ROM. I'm looking for as Vanilla as possible. This unit for me will ideally run TCMP as best as it can and Vijay's FullScreen along with terminal services. Everything else is a very distinct second priority. I have a Wizard I use for TomTom and a Nokia N95 for an everyday phone. This just needs to be a media player and a remote access unit for my desktop machine. Apart from a file explorer, I could pretty much do without everything else.
Thanks again.
Orb, that Wiki entry needs updating somewhat. There's loads of issues not covered there. The Tomal is a single installer and presumably doesn't need the programs mentioned (though it briefly mentions that at the end). There should be a distinction made there. Some ROM's need these programs, some are single installers, if so ... ... ... ... etc. Not some half-assed brief mention with no other instructions. I presume I just double click the installer in Bootloader and leave it to it???
It says I need to CID/EROM unlock but fails to explain what these are?! More searching shows that it's extended ROM and SIM lock that need removing. What point is there using acronyms for a supposed 'newbie' tutorial..
My unit won't run the EROM program complaining of needing a new NET framework.
This isn't mentioned. Not that you may get this error, what it is, or what you need to do if you do.
The SIM unlock won't run either. Once my unit is in bootloader mode and showing 'serial' I plug in the USB lead and it shows 'USB'. I run the SIM unlocker and it eventually says 'this is not for your device'. More searching and I find I need to be using XP to do this, not Windows 7 or Vista.
Searching about I see loads of people with similar problems. If the Wiki was updated, then when people pointed users to it, then it would do it's job (which is presumably to help people and prevent the forum being full of questions, which it obviously is..).
Looks like I need to get onto an XP machine and do some serious searching through the sometimes 50 page long threads before I risk bricking my Uni.
I'm more than happy to do research if that's what I need to do, but what's the point in promoting a Wiki if you have to ignore half of what it says and find out for yourself anyway?
Not a rant at you by the way. Just a post made from observations.
Cheers.
Hi kryogenik!
I completely agree with you. My Uni came to me from uk with WM6.0, so I supposed it was unlocked and I made various flashes with no fear.
With a friend of mine Uni things were different: it had a stock WM5 and I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
@orb3000: when a newbie comes here asking for instruction on how to flash you always make a ctrl+c ctrl+v with wiki link... Why don't you try reading it with "newbie's eyes"? As kryogenik said, I won't attack you, it's just my thought...
Cheers...
kryogenik said:
Orb, that Wiki entry needs updating somewhat. There's loads of issues not covered there. The Tomal is a single installer and presumably doesn't need the programs mentioned (though it briefly mentions that at the end). There should be a distinction made there. Some ROM's need these programs, some are single installers, if so ... ... ... ... etc. Not some half-assed brief mention with no other instructions. I presume I just double click the installer in Bootloader and leave it to it???
It says I need to CID/EROM unlock but fails to explain what these are?! More searching shows that it's extended ROM and SIM lock that need removing. What point is there using acronyms for a supposed 'newbie' tutorial..
My unit won't run the EROM program complaining of needing a new NET framework.
This isn't mentioned. Not that you may get this error, what it is, or what you need to do if you do.
The SIM unlock won't run either. Once my unit is in bootloader mode and showing 'serial' I plug in the USB lead and it shows 'USB'. I run the SIM unlocker and it eventually says 'this is not for your device'. More searching and I find I need to be using XP to do this, not Windows 7 or Vista.
Searching about I see loads of people with similar problems. If the Wiki was updated, then when people pointed users to it, then it would do it's job (which is presumably to help people and prevent the forum being full of questions, which it obviously is..).
Looks like I need to get onto an XP machine and do some serious searching through the sometimes 50 page long threads before I risk bricking my Uni.
I'm more than happy to do research if that's what I need to do, but what's the point in promoting a Wiki if you have to ignore half of what it says and find out for yourself anyway?
Not a rant at you by the way. Just a post made from observations.
Cheers.
Click to expand...
Click to collapse
Yeah, as dear Admin said "Wiki is a strange place"
Why not try to post this request on the proper place on general section
"request to mods by users"
I think that will be the place to have an answer
Cheers,
Auzman said:
I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Click to expand...
Click to collapse
Exactly. There are some very odd ideas about what a tutorial is.
I'm hardly a newbie myself, but when there's something so valuable at risk it obviously makes sense for things to be right? Why bother otherwise.
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
Click to expand...
Click to collapse
Well, I've got the extended ROM showing. I can understand that needing to be done - perhaps the new ROM needs it writable. I can't for the life of me imagine why the unit needs to be SIM unlocked though?? I have seen posts from people who have SIM unlocked AFTER a ROM flash so I'm thinking perhaps this isn't the case?
Did you do either of these? Or maybe your unit was already in this state?
orb3000 said:
Yeah, as dear Admin said "Wiki is a strange place"
Why not try to post this request on the proper place on general section
"request to mods by users"
I think that will be the place to have an answer
Click to expand...
Click to collapse
Thanks Orb. But it's not a request. I have a feeling it wouldn't be acted upon anyway. I can't be the first to point out inconsistencies.
I run a website and Vbulletin forum too. The day I have to rely on someone else to tell me it's not right is the day I give it up.
It sounds like I'm bashing XDAD. I'm really not. It's been a lifeline for me numerous times (the forum I must stress, not the WIKI).
I'm just surprised that such a fantastic resource is being let down by the one thing it should be proud of.
Auzman said:
Hi kryogenik!
I completely agree with you. My Uni came to me from uk with WM6.0, so I supposed it was unlocked and I made various flashes with no fear.
With a friend of mine Uni things were different: it had a stock WM5 and I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
@orb3000: when a newbie comes here asking for instruction on how to flash you always make a ctrl+c ctrl+v with wiki link... Why don't you try reading it with "newbie's eyes"? As kryogenik said, I won't attack you, it's just my thought...
Cheers...
Click to expand...
Click to collapse
I also was a newbie sometime, and I found that if everybody gives me easyly all my questions and problems I will not learn never! and I will get used to demand that people has to give me the answer right away!
So no my friend, I understand is not an attack and I´m also friendly:
But said that I´ll push newbies to do it by themselves, even if it´s a little bit more difficult
At the end they as me wil apreciate it, because we learn to SEARCH and READ
lol.
Cute idea but there's a big difference between encouraging someone to help themselves and pointing them to articles that do the exact opposite to what they're supposed to do (i.e. confuse rather than assist).
Everyone needs to start somewhere, but you NEED to have at least some correct and up to date information to send you on your way.
You wouldn't give someone a manual for a 1972 Ford and tell them to read it so they can fix their 2009 model.
Anyway, that's my opinion on it. I hope one day someone has time to add missing bits to the Wiki. I appreciate it could be a major task. As I said, essentially this will save on hundreds of people posting the same problems over and over again and people getting sick of replying to the same posts over and over again.
It's simple common sense.
OUT
Agree mate
I´ll try to find out how we can update the Wiki
Have a good day

Categories

Resources