Hi, I have just received my new (to me) SPV M700 from a guy on the internet.
It was originally locked to Orange. Has been flashed a few times by previous owner and has Ausdim on it (don't know what I'm talking about as am new to this stuff). It's been unlocked and upgraded to WM6.1, also has Tom Tom and European maps.
I put my O2 sim in and turned it on. What I got was a white screen with the words HTC, also MO5, BO5, DO3 Ausdim, and a tune played, then windows 6.1 screen came up. That's it. Nothing else happens, phone doesn't work, in fact nothing works. Oh yes, a green light at the top right hand side flashes occasionally.
Also, l had three new styli shipped from Japan. Pushed the white end onto the pen and inserted it into it's appropriate place on phone. Came to get it out and the end has come off leaving the stylus in the holder inside the machine. Oh dear. Not my day is it.
Any advice would be appreciated.
I have experience of flashing psp's and using pandora batteries so the prospect of fiddling with flashing is not totally scarey to me. But I did get to know the machine first and read a lot before trying it. Don't want to rush into such stuff with this phone if there is a simpler solution.
Cheers
Puddle
Hi guys,
I realise I may have upset people by posting a question before I have contributed anything to the forum.
Will be happy to do so when I have the phone up and running.
Here's a quick introduction......... if that's the protocol.
Am a retired aged person who loves tinkering with new technology. Was first introduced to computers with the Sinclair ZX81 which had 1k of ram, yes 1k!
I even got a 16k rampak for the back. Such wonderful technology, I also had a fiddle with machine code programming.
Then I got a Commodore 64, more fun. Later on, I got a Psion, again more programming and compiling fun. Then laterley I have a couple of pc's and a laptop. Also got recently a psp and liked it so much that I bought another one with custom firmeware on it. Have had lots of fun upgrading and such.
Just got a garmin for the car too for when we go off to France for a few months with caravan.
Just a quick introduction as to who I am. Have had a look at some of the posts and I have lots to learn. Thanks for making it happen to a golden oldie.
Cheers
Puddle ('cause my hobby is scuba diving)
Hmmm....I feel for you. My Trinity has the original wm5 rom, when I boot it up it starts with the white HTC screen you described but then kicks into windows. I doesn't sound good!
As for contributing first...don't stress about it. We all have to start somewhere
Thanks for the reply, the chap who sold me the phone is going to ring me tomorrow to see if he can sort it out.
My sim is a non 3g, is it possible that this could be the problem?
If it's something so simple I should be lucky.
I was really excited about getting the phone - a bit of a bummer that it isn't working.
Cheers
Lyv
I don't think it is the sim! Does the device boot without the sim? If not then it something deeper!
No, it is exactly the same with no sim in. Oh dear.
Perhaps it can be remedied by re flashing ??? The guy who previously flashed it may have the solution.
Cheers
Lyv
puddlediver said:
Hi, I have just received my new (to me) SPV M700 from a guy on the internet.
It was originally locked to Orange. Has been flashed a few times by previous owner and has Ausdim on it (don't know what I'm talking about as am new to this stuff). It's been unlocked and upgraded to WM6.1, also has Tom Tom and European maps.
I put my O2 sim in and turned it on. What I got was a white screen with the words HTC, also MO5, BO5, DO3 Ausdim, and a tune played, then windows 6.1 screen came up. That's it. Nothing else happens, phone doesn't work, in fact nothing works. Oh yes, a green light at the top right hand side flashes occasionally.
Also, l had three new styli shipped from Japan. Pushed the white end onto the pen and inserted it into it's appropriate place on phone. Came to get it out and the end has come off leaving the stylus in the holder inside the machine. Oh dear. Not my day is it.
Any advice would be appreciated.
I have experience of flashing psp's and using pandora batteries so the prospect of fiddling with flashing is not totally scarey to me. But I did get to know the machine first and read a lot before trying it. Don't want to rush into such stuff with this phone if there is a simpler solution.
Cheers
Puddle
Click to expand...
Click to collapse
Before thinking about reflashing, try Hard Resetting. Be warned: you will lose all data on your phone! ...but it could be a solution for your problem.
Thanks for the advice, will speak to the guy I bought it off tomorrow evening and if we don't get anywhere consider the hard reboot. (under guidance).
Regards
Lyv
Sorry.
It was my phone you bought so hello again! It's very strange that it's not getting past the Windows 6.1 splash screen even without a SIM as it was booting fine when I sent it and if it isn't getting past their even with the SIM removed then it may be something more intrinsic although I don't know what.
Hard reset the phone by pressing and holding both the soft keys and then using the stylus to reset the phone and follow the prompts, it will erase TomTom but you have all the back ups to reinstall that and I'll ring you and talk you through the process.
If the hard reset doesn't work then I'll shove a Mini SD to SD card converter in the post to you and walk you through flashing a new ROM from the memory card and if that doesn't fix it then I'm stumped and I'll give you a refund, but I'm sure it won't come to that.
Sorry for all the hassle!
Mike
Or if you're still awake feel free to ring me (don't mind returning the call to save your phone bill) and I'll try and talk you through everything now as I'll be up for an hour or two yet, you should have my phone number in the PM I sent you on YD.
Thanks for the reply Mike, would have been tucked up in bed when you posted so will speak with you tonight. Give me a bell on my landline, notified on yd site pm. I could ask a silly question.......did you load WM6.1?
Cheers
Lyv
Oh dear, all our efforts failed Looks like it's dead. Could have been dropped in transit, thank goodness for insurance.
Will have to look for another phone now.
Cheers
Lyv
not even flashing the firmware again helped ?
Soft and hard resetting does nothing. I tried connecting the device up to my pc with the usb cable but xp didn't have the drivers so can't access via that method.
Thanks for the reply anyway.
Lyv
You need to download and install Active Sync (at least version 4) before Windows XP will recognise the phone.
Get it here
Thanks IK, will download and try again. I was on an older version of activesync from when I used to use the IPAQ.
Cheers
Lyv
Upgraded my activesync to 4.5 and connected trinity. xp detected that a usb device had been added and activesync attempted to connect. At the end it gave up with a message that the connection to the windows mobile device couldn't be made.
The device itself had the red light at the top to show that it was taking power from the usb and the wm6.1 splash screen is still showing.
No joy, must be dead.
Thanks for help
Lyv
I shall be writing a long, complaining letter to Royal Mail
From what the OP has said it sounds like the phone's reset button isn't working at all as she can't get the phone to enter bootloader or hard/soft reset the phone and the only way to power it down is to remove the battery so it sounds well and truly bricked.
I'll have a play when it gets sent back to me and may ask you guys for some help sorting it but I'm not hopeful.
Hi Mike,
Money arrived in Bank account. I've posted your phone etc back to you today, special delivery, so you should get it tomorrow or Saturday at the latest.
Hope you get some joy from PO.
Cheers
Lyv
Still looking for a phone ...... ah hum, am even thinking of the mda vario II
Got a new phone on the way now - it's an xda trion. Yes, I know, not one of yours.
However, I'm sure I will get loads of fun out of it.
Over to the Hermes sub forum for me.
Cheerio
Lyv
Related
Hi all,
After spending 2 days with my vario my dreams of a half-decent smartphone are shattered.
I've got a C500 which hasnt really caused me any problems in over a year, now 2 days after having a vario i'm almost pulling my hair out.. can this phone possibly have been released in such a bad state or is it just mine?
For starters it crashes, not now and then, but like it's a hobby of the vario's, i dont think i can leave it for an hour, come back and find it hasn't hung in some form.
Sometimes i have to do a soft reset, sometimes, i can press the power button, get the screen to light up but can't do anything. Sometimes I get icons but when I click them i'm told the shortcut doesnt exist.
Ooh another thing it seems to like doing is randomly going into flight mode, and one really good crash was when i called it and the source phone could hear the ringing but the vario was just sitting there doing nothing.
So is it just mine or is this the most unstable phone the UK has ever seen? Is it worth me asking for a replacement, or just flashing the k-jam/qtek rom over the t-mobile one? Is there a way to backup my t-mobile rom and flash it back should i find the qtek/kjam rom does the same?
I've tried hard-resetting then cancelling all the t-mobile gubbins that loads from extended rom, but that didnt make any diference.
Any advice gratefully appreciated
Thanks
Personally, I'd say get T-Mobile to replace it! Unless you've installed a buggy piece of 3rd party software (but if you did, you wouldn't on here complaining about the phone you'd be complaining about the software, right?).
I also have an MDA Vario. I haven't touched the Extended_ROM (was going to, had a look and decided it was running fine so don't mess with it).
It's solid as a rock. As per a thread on howardforums asking how many times per day have I soft-resetted the phone and my answer was an average of zero.
I hard reset it on the day I bought it (after installing GPRS Monitor which knackers the backlight turning back on after sleep) and took the battery out after T-Mobile decided to disconnect me from their network (at their support line's request).
Anyway, it's on 24/7, never needs a reset of any kind, gets mobile emails via ActiveSync and is generally a wonderful piece of kit!
List what apps you've installed (even if they're T-Mobile supplied ones from CD) since buying the phone as there may be something buggy there. If not, definitely get T-mobile to replace it as it's certainly not a crap model (mine is absolutely fantastic).
Thanks Andy,
I've literally not installed anything, i'm just about to install pocketcommander but that will be the first thing i've actually installed. I've hard reset the phone this morning and it's already hung once on me (
I'll give tmob a call and see if they can send me another out today or something
Yeah, then you've definitely got a knackered phone. They should replace it (how long have you had it) without problems.
Hope you enjoy the replacement, they really are a great bit of kit
Well just had my first ever dealings with tmobile supoprt and it's as bad as the phone
They say because my contract/phone is only 3 days old i need to go back to the people i bought the phone off to get a replacement, problem is they'l want me to send the whole boxed thing uip and all the box etc is at home since i work away during the week
That's got to be faulty, like others have said.
WHen I bought mine, (T-Mobile shop in Leeds), I was told that if it was faulty within the first 28 days, there'd be a straight replacement issued immediately.
Don't accept anything less.
For what it's worth, I always try to be exceptionally pleasant when returning things rather than going in "all guns blazing"; it gets results a lot more often than the "I know my rights" approach. Of course, when it all comes down to it, the "i know my rights" approach might be necessary, but hopefully it shouldn't be.
The phone is superb, so stick with it even tho it is a bit of hassle for you.
good luck!
hi there no problems with my vario either. seems to work fine. no soft/ hard resets needed so far. have had it for 10 days. only thing is after the xteended rom instals there is a file called canned text in words which opens up in a crazy language. does not go on hard resets. but does not cause a problem either. any ideas on what this file is. have othar vario users noticed this file. please help.
_Belial said:
Thanks Andy,
I've literally not installed anything, i'm just about to install pocketcommander but that will be the first thing i've actually installed. I've hard reset the phone this morning and it's already hung once on me (
I'll give tmob a call and see if they can send me another out today or something
Click to expand...
Click to collapse
may not be relevant to your problem, but if skype is installed on yours from the hard reset install, it may be worth removing, on the k-jam as soon as i removed skype, reseting stopped happening
Hi guys, great forum.
I must admit to being rather nieve and lost in all the technical stuff! Im a newbie to the XDA world, and so far Im loving it!
I bought my O2 XDA mini s on ebay, at just over 2 months old. Its in perfect condition, but when I try to remove the O2 software, it's not on the list... but its definately still on there!
Should I let my battery run out and reboot it?
Also it wont link with the outlook on my pc (installed from the cd) so it looks like its gonna take me 3 weeks of typing to put all my contacts in to it!
Can someone point me in the right direction for a thread? Or is there a good site for newbies to look at in layman's terms?
Any help would be extremely well recieved!
Cheers
Hi Gary
sorry mate can't help but noticed your post had no answer. Like you I am not a techie. Most of the posters on here seem to do nothing but experiment with their XDA's all day There is a wealh of info and help but sadly only useful to other techies.
There doesn't appear to be anything geared at assisting casual users and non techies that have neither the time or inclination to fiddle with ROM's and software etc .
I reckon that would be a useful sticky for noobs- like how to change/ customise the desktop and install various A/V software and remove o2 software etc
Suggest you get the full manual and wade through that.
I bought my o2 mini s at xmas and haven't made a single call on it yet . Its far too complicated for me and working 12 hour days I've no time to play about with it. :roll:
I'm no techy either but I do know that if you do a hard reset and choose corporate install the O2 stuff is not installed. There's some good advice here too - it's maybe a bit less technical than this site.
http://www.clieuk.co.uk/forum/forumdisplay.php?f=45
Dave
Cheers for the replys Dave and Peanut.
I managed to find something useful here... http://www.avforums.com/forums/showthread.php?t=287641
if theres anyone else thats confused about this stuff.
I'm really happy with mine, on the whole it seems pretty simple to use. I hate that it doesnt close programmes when you click the x though.
Im gonna have a little play, but I'll need to get my mms and gprs info from orange first if i install the corporate profile.
I find that if the phone is on for more than 5 mins ifI press the green call button it doesnt bring up the phone screen, even with the normal power setting! I'm hoping this new profile will speed the bad boy up a bit too!
WiFi is a godsend on a mobile! Yey!
Without going through all the palava of flashing a new Rom the easiest way of really removing the O2 crud is to do a Hard Reset of the device (hold the Com Manager and Voice Command buttons the poke the little reset hole on the right hand side of the unit.
When you get the option select corporate installation option and then if I remember correctly you get a count down, press the reset button (without the other two buttons) again briefly to do a soft reset this should then start Windows in its regular non O2 sullied form.
Hope this helped.
Guys I recently purchased a brand new SPV M600 from ebay and when I say its new, trust me because it was completely sealed and no marks/scratches on the M600 plus all the wires/leads were sealed etc, and he even sent me the invoice from Orange stating the date of purchase, accidentally I think as it contained his home address and telephone number!
Now when I first turned it on and charged the battery etc, I had a little play with it and it all seemed fine. I took it to work with me that day and at work it started to act strange.
First it started by soft resetting itself while I was in the SETTINGS window just tweaking all the bits and bobs to my liking. Anyway it started up again and this time it seemed ok. I tried opening all the menus etc as I had done before but it didnt soft reset again which was a little relief!
It worked fine for the next 10-15 mins after which I put it away and started doing some work which is what I should've been doing in the first place!
I got home in the evening and sat in from of my PC and turned on the PPC and this time it started at the Splash Screen instead of coming out of stand by! Weird as I didnt reset the device and its on Button Lock so it couldn't have happened by accident whilst being in my pocket!
The only problem was though, this time it stayed in the splash screen and wouldnt go past that! I soft reset it again but still no luck!
So I then went for the kill and did a hard reset, not that I lost anything as I didnt have any information on there. After the hard reset, it goes past the splash screen on to the blue nice looking Windows 2005 screen but it stays stuck there!
Did a hard reset again and this time it worked but it crashed when it was installing the customisation tools! It needed a soft reset again! After that it seemed to work ok... only for a little while before it started all over again!
Now this was the original Orange Rom and I have no idea which one it was and I didnt care because it had to go!
I came here and found that our friend Jester was upto his old tricks again and had released a modified version of the Qtek Rom, so I went for it and installed it without any problems (except for his very original spash screen which scared the hell out of my little sister and I didnt find it very comforting either but soon had it changed with Jester's HTC Splash screen).
But unfortunately the problem still remains and the same thing keeps happening. It soft resets itself once in a while and when I do a hard reset it gets stuck in either the Splash Screen or at the next screen which is the Windows 2005 blue screen.
Its like trial and error really, when you guys want to hard reset your prophet all you have to do is do it once, but I have to keep trying at least 2-3 times.
In some cases I need to do a hard reset and then a soft reset soon after when it gets stuck in the Windows 2005 blue screen! And even then its not over because when it gets to the installation of the customisation software, theres a good chance it'll crash there and will need a soft reset!
I tried to install the original Qtek Rom, the one which Jester modified a little but it wouldnt work and I'm guessing I only have the CID lock to thank for that! Mines a G4
Any idea guys? I'm totally screwed here as I cant send it back to the guy I bought it from because I have changed the Rom and thats not good because he cant send it back to Orange to get a replacement! I wish I hadnt changed the Rom and just sent it back to him but I thought it was a software issue.
I'm not convinced its a software issue anymore though!
If you made it this far then I apologise for making this post too long (was longer but I had to to edit out like 1/4), and bloody hell is that the time!
Anything from anyone would be much appreciated.
All the best.
My friend you should try to format your phone and install new operating System...Similar problem happened to me (mine just freezed and I had to reset it) so the new OS is the solution of your problem...So when you do that,tell us if everything is ok..And one more thing---This little mobile device is THE BEST you'll ever get for that amount of money-so keep it and take care my friend...
Greetings!
Alix, thanks for your post. I'm not too sure about that because like I said, it came with the original Orange Rom and even then it was like this, and after upgrading to the latest Qtek Rom, the problem still continues. So somehow I dont think its the software. I mean I hope it is the software as thats an easy fix if I can somehow get my CID unlocked and right now thats not possible on G4 Roms, unless I'm wrong and falling behind?
I have a feeling its the hardware and if it is then I'm screwed!
Thanks for your reply and hope to hear from others soon.
Have you tried to replace the battery? some times the battery causes this kind of behavior when its not supplying enough power to the phone.
try to HR with the phone connected to a wall charger (not to pc) and see how it goes.
if it reboots OK, so probably its a battery issue.
Shayd that was good thinking and I tried it right away but unfortunately it wasnt the case. It still needed 3 tries... one hard reset followed by two soft resets before it went past the Splash Screen.
I've just about had enough with this thing!
Thanks nonetheless.
How To Reset SPV M600
hi every one,
can some body tell me how to hard reset SPV M600
It's On ORANGE
IPL 2.10
SPL 2.10
infozohaib said:
hi every one,
can some body tell me how to hard reset SPV M600
It's On ORANGE
IPL 2.10
SPL 2.10
Click to expand...
Click to collapse
RTFWiki!! It's there!
hi , I have spv m600 from orange and I did something to change the original room , and now it work perfect here do that way
first thing unlock sim using this link to download unlock tool.
http://forum.xda-developers.com/showthread.php?t=300062
After that you can download room from this page to updagate your phone
http://forum.xda-developers.com/showthread.php?t=297489&page=3
Download: LvsW WM5 NVID(no vendor) [RUU-Prophet-220734-2207114-024721-NVID]
That room work for mime . you should try it
I hope .It ll help you
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
Hard reset SPV M600.
How reset SPV M600?push buttom cam and buttom comm manager(both two buttoms left ) and the reset with the stylus.keep the two buttoms pushed till you get a message then strike any key to quit.
Caution:
you turn off your pda before doing any hard reset.your pda will install default parameters.
Save your data before any hard reset.
good luck.
phew! i just went to sell my SPV M600...as its being doing my head in an is long overdue for an upgrade. however, it decided to die in the shop! i was offered 50quid too, so i wont be goin back there, but i needed the money to get me through to pay day, (its something ive been puttin off doin fior awhile, but when moneys tight....) id just like to say a huge thank you for lettin me be able to reset my own phone, the Orange shop wanted £100 for a replacement (screw that!) an the car phone warehouse wanted to take the phone, send it to sweden, mess about with paperwork, an probably wouldnt have give me back till next year.
so, Thank you
P-Swish
PS...does anyone have any experience/news on the new Nokia N95? im lookin at upgrading to one, an well, if anyone has any bad experiences/insider info pls email us
Hi all,
I have a 8125 (Wizard) that I bought used with a broken LCD - I replaced the LCD with hopes of having a functional phone, but I'm not quite there...
It WAS working as a nice little PDA for a while, with the newest Cingular ROM (2.25 I believe). HOwever, I received absolutely NO signal on the radio - the little animation just constantly went like it was forever searching.
So, in my newfound expertise in flashing HTC devices, I decided to flash this to a different ROM. First, I tried the one they call Button 1.05. No bones - it'd drop connection before even going to the tri-color.
Next, I tried the SlimEdition 2.2b of WM6 (I wanted to put WM6 on it anyway, and with this old of a phone, I'm keeping away from excessive gadgets). Same deal as the Button 1.05.
On to the Faria WM6 I found in another forum. This one didn't even find my phone.
Before suggesting I try doing the flashes more than 1 time, I did.. I've been trying to flash this thing for over a month...
Additionally (and probably part of the problem), when I connect the phone to my mini-USB (no, not HTC OEM) it establishes connection about 1/3 of the time....the rest of the time I get a "USB Device not Recognized" warning from XP - I then disconnect it and reconnect it until AS4.5 sees it.
Most recently, I tried putting the Button 1.05 on again, and actually made progress...sorta...
Once I got the RUU running, I actually got it to progress to 2% before the RUU declared a connection failure. Stuck in the RUU screen, I tried all the ROM's I have on this thing, and none get past 2%.
So, NOW, I have an 8125 that's stuck in the RUU screen. I dont know what I can try next, or what might be the problem - however, if anyone knows or has spare parts they're willing to donate to science (I can afford to pay the shipping - that's about it) then I would be most grateful. My initial thoughts are bad USB port or mainboard, but I haven't a clue where to get them.
Alternatively, if I dont hear from anyone soon with good news, I will be offereing for sale 1 hardly used LCD/Digitizer combo for what I paid for it. (approx $45 USD).
Summary (long post, eh?):
1> Can I get out of the tri-color RUU screen, or did it getting to 2% and then dying effectively brick this phone?
2> Anyone have suggestions on what to replace to prevent AS4.5 (or even Windows) from misdetecting the phone when connected via USB?
3> Anyone have parts for above-mentioned repairs/replacements? I'd be most grateful....
TIA!
- M
Follow up - next day (yes, next day)....
Apparently, the Forum Gods were watching over me as I spewed about my flashing issues......
I tried flashing it one more time, using the Slim v2 WM6 ROM....wouldn't ya know, the sunnovabatch worked....
Dunno why or what I did differently, but I dont want anyone pounding their heads trying to find an answer for this....
(I'll still take any donor phones, though...this one is 'better', but still not 'great')
Thanks for lookin!
- M
thats good to hear. say, how hard you think it would be to replace a usb port connector? mine is broken
collwatt said:
thats good to hear. say, how hard you think it would be to replace a usb port connector? mine is broken
Click to expand...
Click to collapse
Well, I've never replaced one myself, but it looks like it's just a few solder joints....
Can anyone confirm this? I dont want to mislead you by saying it's easy, in case it just looks easy, and really isn't.....
Also, I think I saw a thread elsewhere where someone had a bunch of the USB connectors that (s)he was selling....search here first - I'm pretty sure it'll be a better deal than you'll find on fleabay....
GL!!!
- M
Hi all,
i have a serious problem with my MDA Vario II (HTC TyTN),
just have this device since 2 weeks, and last week i flashed a rom onto my device, its a nameless windows 6.1 rom...
the flash went perfect, the device worked flawlessly!
the device has been working fine all week, i had it hard reset for like 2 times.
now i did another hard reset, everything seemed to go just fine, battery was 100% device nicely came into the bootloader mode, nicely went resetted, perfectly booted letting me setup the device and calibrate the stylus right after this the device resetted itself and after the windows logo it just went into white screen, i waited this out for like 15 minutes and then i pressed soft reset... this white screen was the last thing i have seen on my screen so far (2 days ago now) the only thing my device does is give me a red led when it is connected to the wall charger or usb and the battery is not in the device
as long as my battery is in the device it does absolutely nothing, no sign of life!! not even a red led!
is there anything i can do about this? or do i need to send it away to t-mobile?
i really hope someone can help me with this one!
cheers ChilleCharlie
ps: normally when i press both the soft keys and the reset it would take me into bootloader mode, this doesnt even work no more!
i have been reading on this forum for 2 days now i just have no idea what this problem could be! can somebody please help me! i think it might be my accupack is that possible for a 2 weeks old phone?
is a herm100/200/300 device capable of booting without a battery in it?
cheers Charlie
ok here comes the test result, i was planning on shipping my phone back to the supplier but instead of this i tested my battery with a electrometer guess what? 0,04 volts are on my lipo pack!! OMG battery sudden death! never had this before in my life! now i know i can fix this battery pack did that before with some years old li ion and some months old lipo's but since i am under warranty i hell yea am gonna make use of it! this pack will be sent back to t-mobile in the meanwhile ill buy my ass a new one so i can use my phone
thanks for everything this website is great even thow i havent had 1 reply yet, thanks to you guys i got wm6.1 and will get it back running now! tytytyty btw i heard something about hardspl beeing more safe? i guess i should flash it onto my device or is that risky to do ?
Sorry, didn't see your post until today. Might not have been able to help anyway.. Glad to hear you sorted that out OK though..
As for Hard SPL, its a must to have on your Hermes before flashing as it will make it possible to recover from a bad flash. Its NOT a guarantee but it is a safety net to help when things can/do go wrong.
Would also suggest using the sd card method for rom flashing as its safer than via pc(Hard SPL takes about 2 secs to upgrade so I do that from the pc BUT you can do this via sd card too).
Welcome and happy flashing...
thank you for that information once i get my device running again it will be the first thing ill install even thow i dont think my problem is rom-related anyway, today my battery has been tested in a different phone, as i thought it was completely dead! also my phone has been tested with another battery... well my phone is completely dead as well! i think it has had a short circuit somewhere inside which would explain why it doesnt do anything with or without battery installed...
i do not know for sure thow.. but thank god i still have my warranty.. althow im not sure about this since my phone wasnt running official firmware.. but i guess that has nothing to do with hardware malfunction now does it? so ill be sending it back to the supplier tommorow damn i cant stand not having this device working
cheers chillecharlie