[Q] Has anyone tested a Note 3 with Samsung HM5100 Bluetooth pen? The device is very interesting but is listed as for Note 1 / Note 2.
xclub_101 said:
[Q] Has anyone tested a Note 3 with Samsung HM5100 Bluetooth pen? The device is very interesting but is listed as for Note 1 / Note 2.
Click to expand...
Click to collapse
I use my HM5100 all the time with my note 3. Works fine.
Bulbous said:
I use my HM5100 all the time with my note 3. Works fine.
Click to expand...
Click to collapse
Thank you!
Is it detected even if the original pen is stored in the phone? And what happens when you have two pens near the screen?
xclub_101 said:
Is it detected even if the original pen is stored in the phone?
Click to expand...
Click to collapse
Yes it is if you have the "Disable pen detection" setting unticked.
xclub_101 said:
And what happens when you have two pens near the screen?
Click to expand...
Click to collapse
You can't do that - it sets up a quantum disturbance and causes a mini black hole to appear, which sucks in one of the pens.
Seriously, it gets a bit confused when you try to draw with both
Related
Hi!
Got my Note 3 today and my air command function does´nt work.
Have tried to turn on/off the phone and the "aircommand" function in settings.
S-Pen is working cause i can see the pointer and the button on the s-pen works.
DeL09 said:
Hi!
Got my Note 3 today and my air command function does´nt work.
Have tried to turn on/off the phone and the "aircommand" function in settings.
S-Pen s working cause i can see the pointer and the button on the pens works.
Click to expand...
Click to collapse
I'd return and exchange.
Are you doing it right? You need to hover the pen close the then screen, hold the spen and release it.
MohJee said:
Are you doing it right? You need to hover the pen close the then screen, hold the spen and release it.
Click to expand...
Click to collapse
Yes om doing it right.
It's that non LTE non Snap800. Gotta get the good one when it comes out in a few days!
weirdingway said:
It's that non LTE non Snap800. Gotta get the good one when it comes out in a few days!
Click to expand...
Click to collapse
The note two's s-pen had two screws under the button to adjust sensitivity so it's possible it could be a dodgy pen opposed to phone, worth a google if you don't want to exchange or they have no stock to exchange.
I'm having issue trying to use air gestures it doesn't work.
weirdingway said:
It's that non LTE non Snap800. Gotta get the good one when it comes out in a few days!
Click to expand...
Click to collapse
I have with LTE.
sjm1982 said:
The note two's s-pen had two screws under the button to adjust sensitivity so it's possible it could be a dodgy pen opposed to phone, worth a google if you don't want to exchange or they have no stock to exchange.
Click to expand...
Click to collapse
Problem Solved!
After a few tries i found the sensitivity-setting for "my" S-Pen. My pens sensitivity was to high, so i had to decrease it a little.
Have a instruction video of how to adjust the sens of a S-Pen.
The person in the video had the opposite problem so he turned the screw clockwise.
Youtube Search: [FIX] Note II S-pen hover problem (Samsung Galaxy Note 2 / N7100)
DeL09 said:
Problem Solved!
After a few tries i found the sensitivity-setting for "my" S-Pen. My pens sensitivity was to high, so i had to decrease it a little.
Have a instruction video of how to adjust the sens of a S-Pen.
The person in the video had the opposite problem so he turned the screw clockwise.
Youtube Search: [FIX] Note II S-pen hover problem (Samsung Galaxy Note 2 / N7100)
Click to expand...
Click to collapse
it seems i have the same problem..but the solution didn't fix it.
any other solution.
update:
resolved !!
called up samsung customer care..they told me to change some settings..and presto!! it works like a charm
Please help me ... .. I lost one system file named ' keyguard' and now my home bottom not working and aircommand ... plllleeeeaaasse heeeeellllppppeee miiiii
max.android said:
it seems i have the same problem..but the solution didn't fix it.
any other solution.
update:
resolved !!
called up samsung customer care..they told me to change some settings..and presto!! it works like a charm
Click to expand...
Click to collapse
And what are those changes?
MasoudMokhi said:
And what are those changes?
Click to expand...
Click to collapse
i don't remember exactly...but i think i did turn it on in the settings...for some reason it was off be default...when i took it outta the box...it was on on my current note 4 by default..not sure why it was off on note 3...anyways you can call Samsung toll free customer care no. of your country an they will check on the phone if you have turned on the appropriate settings .
Hello everybody,
My Spen is not registering well on my note 3 for some reason. I have to press very hard on the screen for it to register. I tried to change the pen's tip but still nothing. Also, I have no screen protector.
insanehadi said:
Hello everybody,
My Spen is not registering well on my note 3 for some reason. I have to press very hard on the screen for it to register. I tried to change the pen's tip but still nothing. Also, I have no screen protector.
Click to expand...
Click to collapse
You might have a fake Note 3 - which would not be surprising since you have not been able to read the rules of this place and learn that that kind of stuff should be posted in Q/A/Help. After the rules also read the thread about fakes.
insanehadi said:
Hello everybody,
My Spen is not registering well on my note 3 for some reason. I have to press very hard on the screen for it to register. I tried to change the pen's tip but still nothing. Also, I have no screen protector.
Click to expand...
Click to collapse
If you have a genuine Note 3 reflash the firmware and do a data factory reset. If that doesn`t help its probably a hardware issue and you have to send the device in for repair.
gee2012 said:
If you have a genuine Note 3 reflash the firmware and do a data factory reset. If that doesn`t help its probably a hardware issue and you have to send the device in for repair.
Click to expand...
Click to collapse
i like to know how do reflash the firmware ?
cheers
chg1282002 said:
i like to know how do reflash the firmware ?
cheers
Click to expand...
Click to collapse
Look here http://www.google.nl/url?sa=t&rct=j...Yo5ICUv2UzEN610K4i_v98Q&bvm=bv.66330100,d.ZWU or here http://forums.androidcentral.com/am...ide-samsung-how-flash-stock-rom-via-odin.html.
Have you tried changing the sensitvity on the pen?
ShadowLea said:
Have you tried changing the sensitvity on the pen?
Click to expand...
Click to collapse
How can I do that?
insanehadi said:
How can I do that?
Click to expand...
Click to collapse
Carefully pop off the button with a small screwdriver (do this in a room where you can't lose it, it JUMPS. Also take care not to break it. You can wedge it under the button in the center.). Then use the screwdriver to make small(it's sensitive) adjustments to the potentiometer (dial) closest to the tip. This sets the sensitivity of the pen.
You can test it without reattaching the button.
It sounds a bit odd, but this is a normal process for a Wacon pen.
Also, giving a good whack on the edge of a table with the side of the pen sometimes helps.
Sent from my SM-N9005 using Tapatalk 2
spen problem
Hi what's up I'm asking 4 some help... my Samsung galaxy note 3.... ofter a root my note 3 everu thing was working until about a week ago... I'm not getting no respond wen I try using the spen... all of the settings 4 the spen is on but yet still it's not working at all I also unroot and flash over the stock rom bUT yet still noting change the spen still not working.... plz can anyone help me I'll really appreciate it...
I have the following Android Device:
Samsung Note 3
Model No: SM-N9005
Android version: 4.4.2
Build No. KOT49H.N9005XXUGNJ2
Security software version: MDF v1.0 Release 3
Issue: The S-Pen fails to get any input on the screen. I have tried & noticed the following:
1) S-Pen detachment notification works when taken out.
2) Air View options pops up when pen is detached.
3) Air view options work when pressed with finger but not with S-Pen.
4) S-Pen works fine with other Note 3 devices
5) Other S-Pen does not work on my device
6) Made sure the S-Pen features are enabled under the settings. Tried enable/disable as well.
7) Tried the following testing using *#0*#
a) TSP Hovering: Works fine with the finger & the S-Pen(as a trial)
b) Wacom Test: Doesnt detect the S-Pen input at all.
c) SPEN Hovering: Doesnt detect the S-Pen input at all.
8) Tried to tighten up the screw within the S-Pen as a trial although it works with other Note 3 devices, however, it didnt work !
9) Did a Reboot as well!
10) The phone does not have any magnetic case either! FYI
11) Tried changing the nib with the new ones as well!
Could anybody suggest a work around for this problem? I am not sure if a factory reset can solve the problem, has anybody got that working after a factory reset?
I have all my data synced with the my google account, so with a factory reset, would it be restored back once signed it back on the phone? Will the Apps get uninstalled as well?? Do you think it is possible to re-install the S-Pen SDK or something?
Please advise!
Thanks
Pierre
Pierrechacko said:
I have the following Android Device:
Samsung Note 3
Model No: SM-N9005
Android version: 4.4.2
Build No. KOT49H.N9005XXUGNJ2
Security software version: MDF v1.0 Release 3
Issue: The S-Pen fails to get any input on the screen. I have tried & noticed the following:
Thanks
Pierre
Click to expand...
Click to collapse
Try running The self diagnostic mode and test the phones screen.
self diagnostic mode - *#7353#
check if the spen is working on that.
smartjais said:
Try running The self diagnostic mode and test the phones screen.
self diagnostic mode - *#7353#
check if the spen is working on that.
Click to expand...
Click to collapse
Works with the fingers but not with the spen...damn...somebody help me!
Sounds like hardware fault with the Wacom hardware.
Sent from my leanKernel 3.13 powered stock 4.4.2 (NF9) SM-N900T
Pierrechacko said:
Works with the fingers but not with the spen...damn...somebody help me!
Click to expand...
Click to collapse
If that's the case then your spen has gone bad. The way the spen works is there is a coil behind the screen and the spen draws power wireless from this coil.
This kinda makes it sure for the problem to be hardware problem not software.
One of two things could have gone bad.
1. The coil itself
2. Or your s pen is not able to take the wireless power..
If you have a friend who has the note 3 then try using his or her spen on your phone. .. That would be a good way to find out if your spen is bad or the coil thing.
smartjais said:
If that's the case then your spen has gone bad. The way the spen works is there is a coil behind the screen and the spen draws power wireless from this coil.
This kinda makes it sure for the problem to be hardware problem not software.
One of two things could have gone bad.
1. The coil itself
2. Or your s pen is not able to take the wireless power..
If you have a friend who has the note 3 then try using his or her spen on your phone. .. That would be a good way to find out if your spen is bad or the coil thing.
Click to expand...
Click to collapse
Ahem..its the coil! Can it be replaced ? Is it expensive?
smartjais said:
If that's the case then your spen has gone bad. The way the spen works is there is a coil behind the screen and the spen draws power wireless from this coil.
This kinda makes it sure for the problem to be hardware problem not software.
One of two things could have gone bad.
1. The coil itself
2. Or your s pen is not able to take the wireless power..
If you have a friend who has the note 3 then try using his or her spen on your phone. .. That would be a good way to find out if your spen is bad or the coil thing.
Click to expand...
Click to collapse
Is the coil covered under warranty?
Pierrechacko said:
Ahem..its the coil! Can it be replaced ? Is it expensive?
Click to expand...
Click to collapse
Pierrechacko said:
Is the coil covered under warranty?
Click to expand...
Click to collapse
Sorry if its the coil. Think that may be expensive.
Not sure how much the new coil thingy will cost you and not sure if its a part of the device screen...
If it is a part of the screen then they will probably replace the screen.
The sPen costs about 50 $ I think.
If you are under warranty and you have not rooted or done anything with the device Samsung should repair this problem without charging you but can never be sure..
Did you drop the device or something before getting this issue ??
Hi what's up I'm asking 4 some help... my Samsung galaxy note 3.... ofter a root my note 3 every thing was working until about a week ago... I'm not getting no respond wen I try using the spen... all of the settings 4 the spen is on but yet still it's not working at all I also unroot and flash over the stock rom bUT yet still noting change the spen still not working.... plz can anyone help me I'll really appreciate it...
Hey a quick question- I have an AT&T note 3 and the spigen slim armor view case. Whenever i wake the phone with the cover on, it shows the normal lock screen, not the s view. This happens only after the screen has been off for a minute or two. Any help? Running a Note 4 4.4.4 port btw if that helps any. Could it be rom related?
jstar8000 said:
Hey a quick question- I have an AT&T note 3 and the spigen slim armor view case. Whenever i wake the phone with the cover on, it shows the normal lock screen, not the s view. This happens only after the screen has been off for a minute or two. Any help? Running a Note 4 4.4.4 port btw if that helps any. Could it be rom related?
Click to expand...
Click to collapse
This happened to me too with my Note 3 N9005. The problem is that new firmwares for Samsung devices don't allow cases that aren't original for that phones. You will have to change of case or buy one original if you want that your S-VIEW works again.
* Other people have the same problem. Take a look: HERE.
Hi everyone.
This is my first post on this forum and I would like to ask a question.
I have noticed that when I connect my Galaxy S7 edge to Gear VR, the Home button keeps pushed and after some time it started to act not properly (can't hear the clicks of the button). I am afraid that after couple of months it will totally stop working.
Does someone have the same problem and what would you recommend in this situation ?
Thanks in advance.
Do you have your gear VR set in the right setting? Position A.
Zeffir said:
Do you have your gear VR set in the right setting? Position A.
Click to expand...
Click to collapse
Hi Zeffir,
I didn't know about that function but does it change the distance between those holding plasts near the microUSB connector ?
Thanks.
RTFM
AveHakob said:
Hi Zeffir,
I didn't know about that function but does it change the distance between those holding plasts near the microUSB connector ?
Thanks.
Click to expand...
Click to collapse
Read the MANUAL!
User Manual Samsung Gear VR
henklbr said:
Read the MANUAL!
Click to expand...
Click to collapse
Haha, unfortunately for me, I skipped that part
However, I think, it changes only the distance between the holders, but not the thickness of the bottom holder
You are right, it changes only the distance between holders and not the thickness of the port. I noticed the positioning before mounting the first time and it is still peeled, very ugly and would assume that a compatible device would not undergo such damage when properly used and therefore expect reimbursement for the damage or a new phone (not a single scratch on mine except that after a year).