Related
Hey guys...
So, I have my Desire Z since about 4 weeks and nothing went wrong with it.
Really NOTHING bad happened, it didn't fall on the floor, didn't fall into water, etc etc.
So this afternoon I unlocked it and suddenly I got a blank grey screen.(worked perfect in the morning) The phone did react to my power up/on button, but I couldn't see what I was doing. Also the touchscreen worked, because I could unlock it (I heard the unlock noise) but I only get a blank grey screen.
I tried Bootloader and Battery pull. Also I took out my SD/SIM/Battery and just blow through the whole phone but nothing want to happen:-(
By the way, my phone is fully rooted and running on Cyanogenmod7 since 5 days. Everything worked perfect until this afternoon...
EDIT:
Looks just like this http://i51.photobucket.com/albums/f368/forthcomingtangent/DSCI1196.jpg
C'mon guys:-(
So is it grey from bootup till it gets to the rom or can you see your boot splash screen and whatnot?
HAK Devil said:
So is it grey from bootup till it gets to the rom or can you see your boot splash screen and whatnot?
Click to expand...
Click to collapse
Yes, when I boot it up it's grey, I notice that it's still working because I get the bootup noise. So I can see nothing. But what I noticed is that the grey screen gets a kinda bluegrey screen while the cyanogenmod7 boot animation(the loop)
Sounds like a hardware issue to me, I'd send it in for warranty if I could. Plus, with your screen being the issue I doubt they would check for something like S-off or anything like that
sounds to me like the ribbon cable for the screen has either broken or not placed in its socket properly, does it make a difference when the keyboard is open? try opening it and closing it a few times... watch the screen. otherwise it could be a fault with the screen board or the screen itself
i would try and claim off warrenty or insurance
No it does no difference when the keybaord is open:-(
Problem at the whole thing is, that I have no warranty because I bought it at amazon.com
you either have to see how much htc will charge to repair it, or take it apart yourself and just check the cables... if any are loose then refit them... or buy a new screen, vga board and ribbon cable and fit it
How much would the last option cost?
And how much do you guys think HTC will chare to repair it?
http://cgi.ebay.co.uk/OEM-SLIDE-FLE...944?pt=LH_DefaultDomain_0&hash=item2a10708cb8
something like that if its the ribbon cable.... but that gives you the whole kit
http://cgi.ebay.co.uk/Touch-Screen-...K_Replacement_Parts_Tools&hash=item2a0fd454a5
thats the digitizer but i dont think youll need that but just in case
http://cgi.ebay.co.uk/NEW-GENUINE-H...K_Replacement_Parts_Tools&hash=item2eb3f529d0
thats the screen
but in fairness your better off taking it to a repair shop and getting a price... if you havnt got a warrenty then you dont have to worry about loosing one
Wow thanks, you're really helping me.
So I found a warranty document, since I bought it over amazon.com from another seller(mobilejoker) and it says that they'll repair me my device if it is defect and not my fault. But they also charge 40$ if it's an obvious damage made by myself. Well, I don't know, it wasn't my fault right? I mean it's not like it dropped in water or fell on the floor.
looks to me like its the ribbon cable or the vga board for the screen, as long as you havnt dropped it in liquid, on the ground or opened it up then it cant be your fault... id go with the warrenty first before you open it up
Hit the thanks button please matey
Done
And thanks again for your help.
alrite glad i could help, if you get stuck or if the warrenty doesnt work come back
hey guys I'm having a very similar issue on my phone, I bought a screen on ebay from a USA seller, as well as a flex cable cus both were damaged in my phone. I've got both of those installed and the phone boots up, gives off noises and vibrates like his did, but no video. Backlight lights up, but just black. I've been googling a lot and apparently the grey screen is just a precursor to what I have. Where exactly is the VGA board? is it on the main logic board? does it need a reflow like some laptop chipsets?
Hey guys I just thought I give you a quick update.
So I got my device back, it's working perfect and I didn't have to pay anything for it.
I'm just a bit confused, because my phone now is totally unrooted, and I always thought that root hurts your warranty.
Anyways, thanks for your help!!
whitis said:
Hey guys I just thought I give you a quick update.
So I got my device back, it's working perfect and I didn't have to pay anything for it.
I'm just a bit confused, because my phone now is totally unrooted, and I always thought that root hurts your warranty.
Anyways, thanks for your help!!
Click to expand...
Click to collapse
Either they gave you a new phone or...
They replaced the screen (or samaged parts) and wiped or perhaps upgraded to newest stock.
Do you still have all your info and apps that were previously on it?
What version of android does it show in about, and which hboot do you have now?
Sent from my T-Mobile G2 using XDA Premium App
Well it's just like it was when I bought it, 2.2.1, only google apps, had to configure sim again no sms, etc.. But my phone is definitely now new because there are my scratches on the back of the phone.
whitis said:
Well it's just like it was when I bought it, 2.2.1, only google apps, had to configure sim again no sms, etc.. But my phone is definitely now new because there are my scratches on the back of the phone.
Click to expand...
Click to collapse
I didn't quite understand your reply, lol sry, but I did see one big clue....2.2.1. Which means you should have no problems rooting again.
Sent from my HTC Vision using XDA Premium App
I don't have any problems with rooting again, I was just saying that I was confused that I got my device repaired for free, although they unrooted my phone.
Hi guys, i had my nexus 7 for about a2 weeks and i love it.
But a i have a doubt and i would be very help me if you could advise me...
FIrst of all i am portuguese, so if i dont express myself correctly don't be afraid to as what the hell am i saying... XD
So here's the thing... Tomorrow is the last day for me to return or trade my nexus 7 on the store i bought it (15 day trial).
I am about to keep it but the is only one thing that is bugging me... On the right side i portrait mode the bezel is a little higher than the screen, but on the right side the scrren and the bezel are equal. The screen does not make noises, it does not goes down when i press it and all seems fine. Sould i worry about the left side of the screen being the same with the bezel? Is it possible for me to get the feared screen lift issue?
Also is it my nexus 7 from a good batch? My SN says CAOKBC172**** ... This serial number indicates something good or bad? I am asking this because i saw people on the forum claiming that the ones above the c70 batch were the good ones...
Please help me so i can make sure if i can stick with my nexus or since tomorrow is my last day to trade it should i exchange it.
Thank u all.....
Hi. There is no such thing as good S/N. At least no with N7. You tablet looks fine. I got a CBOK that looks perfect, but i will not search for micro faults. So my advice is enjoy your N7.
Sent from my Nexus 7 using xda premium
Good night ... I bought my nexus 04/01/2013 4 days and yesterday I noticed that when I make or receive a call the screen turns completely black it ... when the connection is closed it back up and running, it is not a matter of sensor because I do not take the device to the ear.
Has anyone had a similar problem? I'm from Brazil and I am sending the device back for warranty ... If anyone knows what might be available to get.
Remove your screen protector.
Sent from my Nexus 7 using xda premium
I test without the film that was recently placed ... worked perfectly.
Thank you.
You're welcome
the solution (non Ace Hardware kind)
http://forum.xda-developers.com/showthread.php?p=36511008#post36511008
I've noticed just today that there's a dead strip on the touch screen. It didn't do this yesterday. The Nexus 4 was dropped once from 2 feet high, but that was almost a month ago and everything worked fine until now.
The screen still looks beautiful, no dead pixels, no cracks, and the phone is in a protective case with a screen protector.
It seems to me that the digitiser crapped out, but I'm not sure why it happened so randomly.
A funny thing though is that when I drag something fast across the strip it works. And sometimes it'll recognise a touch as a long touch or two-fingered touch along the strip. Weird.
I attached a few touch test photos to show the issue.
Hopefully there's a fix. Has anyone else had this problem? And if you had to send it back to Google, was something like this covered under warranty? What should I do?
Sent from my Nexus 4 using xda app-developers app
You can try to replace the screen yourself or tell LG/Google to send a replacement via RMA. They have parts floating around Ebay
How risky/costly is it to replace it myself? And does anyone know if it's covered under warranty? Cause if is, it'll be cheaper just to get a replacement from Google.
Are there other ways to check if it is indeed the digitiser? I've seen that sometimes touch screen problems are software related. And if that's the case, it'll be easy to fix.
Sent from my Nexus 4 using xda app-developers app
And .... Out of curiosity, what does cause a digitiser to fail without the screen actually breaking?
Sent from my Nexus 4 using xda app-developers app
dwong93 said:
How risky/costly is it to replace it myself?
Click to expand...
Click to collapse
Depends. If you follow the instruction properly, it works well. If you screw up, then Google/LG wont be able to help. A lot of people have done it and succeeded. There are great articles on the web. The price of a digitizer would be about $50-70. I MAY BE WRONG WITH THE PRICING.
And does anyone know if it's covered under warranty? Cause if is, it'll be cheaper just to get a replacement from Google.
Click to expand...
Click to collapse
In most cases no. Because it worked well and suddenly stopped working. Thus Google would say that its your fault. If you are somehow able to convince the Reps that it wasn't your fault, then there is some hope. I
Are there other ways to check if it is indeed the digitiser? I've seen that sometimes touch screen problems are software related. And if that's the case, it'll be easy to fix.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
One way is to remove it and put it to a tester or another motherboard and see if it works. But that takes a lot of time and money,
dwong93 said:
And .... Out of curiosity, what does cause a digitiser to fail without the screen actually breaking?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Anything. The phone might have overheaten to the point that it flashed a certain section of a digitizer. It may also be a battery problem that escalated. If you feel that it's software problem, flash a ROM a see if it works.
IMHO You should send it to LG and get it fixed for about $140~.
This problem should be covered under warranty. If you honestly haven't done anything to cause this damage. (I'm also clueless as to what a user could do themselves to make just one section of the digitizer stop working)
Then lasting 5 months or less would not be considered reasonable and you should be entitled to a replacement.
Remember it is down to the retailer to prove that you caused any damage.
And if you honestly did nothing and it just crapped out on you then you should have nothing to fear in sending it back for a warranty replacement
Sent from my Nexus 4 using xda app-developers app
That happen to my iphone when it got water damage. But if you did not do anything wrong, it should be covered by warranty.
Ditto
dwong93 said:
I've noticed just today that there's a dead strip on the touch screen. It didn't do this yesterday. The Nexus 4 was dropped once from 2 feet high, but that was almost a month ago and everything worked fine until now.
The screen still looks beautiful, no dead pixels, no cracks, and the phone is in a protective case with a screen protector.
It seems to me that the digitiser crapped out, but I'm not sure why it happened so randomly.
A funny thing though is that when I drag something fast across the strip it works. And sometimes it'll recognise a touch as a long touch or two-fingered touch along the strip. Weird.
I attached a few touch test photos to show the issue.
Hopefully there's a fix. Has anyone else had this problem? And if you had to send it back to Google, was something like this covered under warranty? What should I do?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
EXACT SAME PROBLEM EXACT SAME LOCATION...
i think there is more to this than just user error .. i too did nothing to cause this .. 1 day it was fine and then next morning .. just stopped working
@dwong... did you find a solution to this .. did u try claiming warranty.. this should be covered as there is no physical damage .. please do reply to let me know
any1 else have any idea ??!?
thanks
jeetash said:
EXACT SAME PROBLEM EXACT SAME LOCATION...
i think there is more to this than just user error .. i too did nothing to cause this .. 1 day it was fine and then next morning .. just stopped working
@dwong... did you find a solution to this .. did u try claiming warranty.. this should be covered as there is no physical damage .. please do reply to let me know
any1 else have any idea ??!?
thanks
Click to expand...
Click to collapse
I did an RMA explaining everything like I said above. I got my Nexus 4 replaced by Google, and they didn't charge me anything. New Nexus 4 works fine with no issues - I've been using it since May.
dwong93 said:
I did an RMA explaining everything like I said above. I got my Nexus 4 replaced by Google, and they didn't charge me anything. New Nexus 4 works fine with no issues - I've been using it since May.
Click to expand...
Click to collapse
same problem here...did they send you a new phone, or a refurb?
Did you ever find a solution for this?
The same thing has recently happened to mine, did you ever find a solution?
dwong93 said:
I've noticed just today that there's a dead strip on the touch screen. It didn't do this yesterday. The Nexus 4 was dropped once from 2 feet high, but that was almost a month ago and everything worked fine until now.
The screen still looks beautiful, no dead pixels, no cracks, and the phone is in a protective case with a screen protector.
It seems to me that the digitiser crapped out, but I'm not sure why it happened so randomly.
A funny thing though is that when I drag something fast across the strip it works. And sometimes it'll recognise a touch as a long touch or two-fingered touch along the strip. Weird.
I attached a few touch test photos to show the issue.
Hopefully there's a fix. Has anyone else had this problem? And if you had to send it back to Google, was something like this covered under warranty? What should I do?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Same bug here in Italy where I'm living now even if the the phone was bought last year on UK Play store. Problem is Google rep wrote me RMA can take place only in UK or any other county where N4 was originally available on Play store i.e. NOT Italy.
Does anybody know of a workaround to get the RMA here?
Thanks
VSSVPM
I have the same problem
Did you ever find a solution to this?
anawim said:
Same bug here in Italy where I'm living now even if the the phone was bought last year on UK Play store. Problem is Google rep wrote me RMA can take place only in UK or any other county where N4 was originally available on Play store i.e. NOT Italy.
Does anybody know of a workaround to get the RMA here?
Thanks
VSSVPM
Click to expand...
Click to collapse
ak700 said:
Depends. If you follow the instruction properly, it works well. If you screw up, then Google/LG wont be able to help. A lot of people have done it and succeeded. There are great articles on the web. The price of a digitizer would be about $50-70. I MAY BE WRONG WITH THE PRICING.
In most cases no. Because it worked well and suddenly stopped working. Thus Google would say that its your fault. If you are somehow able to convince the Reps that it wasn't your fault, then there is some hope. I
One way is to remove it and put it to a tester or another motherboard and see if it works. But that takes a lot of time and money,
Anything. The phone might have overheaten to the point that it flashed a certain section of a digitizer. It may also be a battery problem that escalated. If you feel that it's software problem, flash a ROM a see if it works.
IMHO You should send it to LG and get it fixed for about $140~.
Click to expand...
Click to collapse
Yeah, I think the overheating might have been what happened to mine. I was using a blackberry charger and I think it might have overheated my battery and fried a strip of my digitizer.
Even i have got the same problem, i dont know who bumped this old thread, but please guide me to for a low cost workaround for my situation
No drop or glass break.. Dead pixel just one..
Hi,
Anybody found the reason for the issue, i too got the same issue; a dead strip exactly in the middle of the screen, My warranty is over already, so anyone has work around for this??
sid21 said:
Even i have got the same problem, i dont know who bumped this old thread, but please guide me to for a low cost workaround for my situation
No drop or glass break.. Dead pixel just one..
Click to expand...
Click to collapse
This looks like a dead thread, but Ill take a punt. I dusted my old Nexus 4 off the other day, which had exactly the same issue with the dead strip on the digitiser. I had tried replacing the screen and digitiser (I have up trying to get the original screen off the original digitiser). The issue remained, so I tried a full factory reset, but that also didn't work. I am now wondering if I should get a cheap motherboard, or try flashing the stock ROM again. Has anyone else had any luck with either?
Hi,
I drop my G2 and the screen broke, i sent it to some guy to put a new one.
He put it on and it worked ok but then some vertical lines showed up because of the screen type as happened some time ago in some roms.
If i reflash the rom, will it solve the problem and it will detect the correct screen type?
Big thanks!!
No one?
I have read comments about some replacement screens being incompatible and having problems. Therefore I think it's probably a good idea to stick to a OEM replacement screen, such as one that came from a working phone.
Sent from my LG-D801 using Tapatalk