Related
hi
needs some help here.
when i ran superhd2, it just went 2 black screen, it was not first time i tried this, so i took out the battery and then put it in again, but now it won't boot up again. when i turn it on it only shows a white screen, have aslo tried this before, but then i just soft reset it a couple of times and then it worked again.
have tried to flash a new rom in bootlaoder, but could't falsh a stok rom, it failed. Also tried task29. but task 29 not working it stuck on 0%.
what can i more try to fix it
fischerben said:
hi
needs some help here.
when i ran superhd2, it just went 2 black screen, it was not first time i tried this, so i took out the battery and then put it in again, but now it won't boot up again. when i turn it on it only shows a white screen, have aslo tried this before, but then i just soft reset it a couple of times and then it worked again.
have tried to flash a new rom in bootlaoder, but could't falsh a stok rom, it failed. Also tried task29. but task 29 not working it stuck on 0%.
what can i more try to fix it
Click to expand...
Click to collapse
you haven't given any details about your phone whether its a eu or us version also what radio or hspl you are using.
id say 1st step, try to update hspl, select 2.08 then try task 29 again
sorry
eu version
Radio: 2.15.50.14
WinMo: OzDROID ROM 2.00
Android SuperHD2_v14
kernel 8.5
hspl3 2.08
tried to flash task29 from sd card and that worked, but didn't help. i can't still install a stock rom, but can install for example Ozdroid but that don't help much, it still white screen when i turn it on
I had something similar I ended up sending it for repair and got a new phone as they were unable to remedy the problem. Maybe you will need to do the same.
oki, but what about when it is HSPL and warranty.
it could be nice to flash it to stock rom first, before sending it in. but it says fail when it comes to Radio_v2 on installation from sd card
Hi there! I have a problem after install MAGLDR :/ I connected my HD2 to computer with ActiveSync, runned ROMUpdateUtility from computer, on my phone there was a tricolour screen, then self-reset and phone is freezing on white HTC LOGO. I tried to turn off my phone, remove battery... I'm also turning my phone on with press vol down + power - I have 3 colour screen and now what? PLEASE HELP!
Connect your HD2 to your laptop/pc... boot it while pressing volume down.. wait untill it says usb in the bottom of your screen. Now you can flash HSPL 2.08 and flash a custom or original rom.
I had the same.. gonna stick with RAM roms untill this is nand stuff is sorted out
I have the same problem... but after reflash HSPL 2.08 there will be no change. Could not start the machine.
How can flash rom from pc without booting the machine?
I couldn't understand "Now you can flash HSPL 2.08 and flash a custom or original rom." the second step ...
solved!
I had the same problem.
The issue it's the radio.
install 2.15.50.14
http://www.multiupload.com/QP0IWGY42F
Hi,
After installing hspl 2.08 and then going on to install magdlr, when successful and rebooting it just stayed on the HTC logo screen. It wont reset but it will enter into bootloader. How exactly do i fix this. I tried reinstalling HSPL but it is still stuck on that screen. How would i change this 'problematic radio'?
I relly need to fix my phone so any help would be appreciated! Thanks
sexyseamus said:
Hi,
After installing hspl 2.08 and then going on to install magdlr, when successful and rebooting it just stayed on the HTC logo screen. It wont reset but it will enter into bootloader. How exactly do i fix this. I tried reinstalling HSPL but it is still stuck on that screen. How would i change this 'problematic radio'?
I relly need to fix my phone so any help would be appreciated! Thanks
Click to expand...
Click to collapse
Download a compatible radio (eg 2.15.50 in post above), boot to bootloader (switch off, vol down + power on (keep holding vol down until it boots), connect to pc and when usb shows on screen run the CustomRUU.exe in the radio download. (if there isn't one included you can take any one from a custom wm rom). You flash the radio the same way that you flash a rom.
Thanks for the quick response! I have tried doing this before and just tried the custom RUU posted above but when i run it where it says the image thats on the phone it is blank. Even so i click to update it and both on the phone and pc it stays at 0%. I don't know what to do!
sexyseamus said:
Thanks for the quick response! I have tried doing this before and just tried the custom RUU posted above but when i run it where it says the image thats on the phone it is blank. Even so i click to update it and both on the phone and pc it stays at 0%. I don't know what to do!
Click to expand...
Click to collapse
Are you sure you have HSPL installed properly. In bootloader mode, check the spl version - it should show as 2.08.hspl, not 2.08.0000 or any other hspl version.
In bootloader mode it says SPL 2.08.0000? When installing it i did select the HSPL 2.08?? What should i do? Thanks
sexyseamus said:
In bootloader mode it says SPL 2.08.0000? When installing it i did select the HSPL 2.08?? What should i do? Thanks
Click to expand...
Click to collapse
I had your problem and for some reason when I first ran hspl the first time and put 2.08 on my phone it said it worked but it didn't actually do anything.
Just reinstall 2.08 HSPL on your phone and then run MAGLDR.
Similar Scenario
I installed 2.08.HSPL - confirm at boot loader screen
I installed MAGLDR 1.13 with success
Flashed HD2_Core_Droid_Desire_HD_V1.5_NAND_ONLY_LEO1024_TMOUS to my phone with success
Phone worked fine for about a day and a half and froze up
Pulled battery and restarted to white screen
I can't seem to roll back the SPL, reinstall the MAGLDR, or install a different radio.
ROM Update Utility appears to start to work and phone restarts and I get an error message that the image is corrupt.
Any ideas?
Hallo,
I want to flash the original Rom wmo 6.5.
So i thought that i have to make a HSPL downgreat from 2.08 to 1.44.
And after that nothing.
No chance to get into the Bootloader or start it normaly.
Befor this i tried to install Android [JDMS Ultimate Nand Rom] but everytime i become the ERROR 262 From the PDA Upgread Utility. It stans still it 0%.
2 times of 200 replays it works but than MAGDLR 1.13 give me the fatal error 1 message.
Now i thougt my htc hd2 is brick or not?
What can i do that it never happens again?
Hope you can Help me
tmous or regular hd2?
tmous - its probably dead from flashing any rom that uses spl 1.42, , is it a tmous? (green send key, red end key)
regular - need more info,,, what rom did you flash? exact filename please,
I Thought i have the regular HD 2.
First of all HSPL 2.08 was installed on my HD 2 after that i installed a new Radio Rom Leo_RADIO_2.15.50.14 after that i installed magdlr 1.13.
All works fine but it dont boot.
go go go .... only fatal error1.
JDMS v1.6.2 Ultimate [Kernel: Hastarin 8.6N] NAND ROM
But then everytime i use PDA Rom Upgrade utility i stuck by 0% and i get the error 262 but it sometimes happend that i got the 100%.
After JDMS install that never boot up, i installed a Stock Rom (Original Rom)
from HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
But after 20 % it stuck.
I test Task29 and it works.
Then i installed HSPL2_RUN and installed HSPL 1.42.
And now i cant boot, i cant startup bootloader, i cant connect to pc.
Its totaly dead.
Fr3shGy said:
I Thought i have the regular HD 2.
First of all HSPL 2.08 was installed on my HD 2 after that i installed a new Radio Rom Leo_RADIO_2.15.50.14 after that i installed magdlr 1.13.
All works fine but it dont boot.
go go go .... only fatal error1.
JDMS v1.6.2 Ultimate [Kernel: Hastarin 8.6N] NAND ROM
But then everytime i use PDA Rom Upgrade utility i stuck by 0% and i get the error 262 but it sometimes happend that i got the 100%.
After JDMS install that never boot up, i installed a Stock Rom (Original Rom)
from HTC
RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
But after 20 % it stuck.
I test Task29 and it works.
Then i installed HSPL2_RUN and installed HSPL 1.42.
And now i cant boot, i cant startup bootloader, i cant connect to pc.
Its totaly dead.
Click to expand...
Click to collapse
so you're saying it DOES NOT have a green send key and red end key?
No its the Regular HD2 from Germany
Fr3shGy said:
No its the Regular HD2 from Germany
Click to expand...
Click to collapse
flashing that SPL should not have bricked your phone afaik. Did you do any battery pulls? (ben pins maybe?)
Yes, i thought 100 times in 2 days ...because everytime i got the 262 Error with 0% i had to pull the battery.
I ve looked at the pins but they looks fine.
hmmm ...but i dont get any led signal while im loading the battery?
Could i kill the battery? At the beginning everytime i loading the battery i got a Orange Led signal that it loads.
Fr3shGy said:
Yes, i thought 100 times in 2 days ...because everytime i got the 262 Error with 0% i had to pull the battery.
I ve looked at the pins but they looks fine.
hmmm ...but i dont get any led signal while im loading the battery?
Could i kill the battery? At the beginning everytime i loading the battery i got a Orange Led signal that it loads.
Click to expand...
Click to collapse
look again and make 100% sure none of the pins are even a little bent, because they may just not be connecting to all 3 battery slots, then put in the battery and plug in the phone and see if it gives a yellow charge light.
Could simply be a flat battery,,,magldr doesn't allow charging when the phone is off.
If you have an old USB cable, mini or micro, cut the end off, bare the red and black, battery out, hold red to + black to - on the battery for a minute or two, see what happens when you plug back in.
samsamuel said:
Could simply be a flat battery,,,magldr doesn't allow charging when the phone is off.
If you have an old USB cable, mini or micro, cut the end off, bare the red and black, battery out, hold red to + black to - on the battery for a minute or two, see what happens when you plug back in.
Click to expand...
Click to collapse
looks like he's not running magldr, from what I read he flashed task29 then HSPL 1.42, so he actually doesn't have anything on NAND atm
orangekid said:
looks like he's not running magldr, from what I read he flashed task29 then HSPL 1.42, so he actually doesn't have anything on NAND atm
Click to expand...
Click to collapse
task29 only flashes the rom memory area, not teh spl/splash/radio areas. HSPL only affects the spl memory area, magldr exists in teh secondary splash screen area, so isn't touched by either of those. Magldr of course wont start since spl is no longer 2.08.x, but i suspect the non charge bug will still be in effect.
(Just for the record, and since there are so many posts recommending it, i personally believe in 99% of cases where task29 is run, there is no benefit at all. it just adds yet another write cycle to our already overstretched nand memory. flashing a new cwm partition will have the same effect.)
samsamuel said:
task29 only flashes the rom memory area, not teh spl/splash/radio areas. HSPL only affects the spl memory area, magldr exists in teh secondary splash screen area, so isn't touched by either of those. Magldr of course wont start since spl is no longer 2.08.x, but i suspect the non charge bug will still be in effect.
(Just for the record, and since there are so many posts recommending it, i personally believe in 99% of cases where task29 is run, there is no benefit at all. it just adds yet another write cycle to our already overstretched nand memory. flashing a new cwm partition will have the same effect.)
Click to expand...
Click to collapse
weird, last time I flashed task29 even with 2.08 I thought magldr didn't start and it didn't go past the splash, maybe I was wrong.
@ OP. have you tried to use a different battery?
Ok guys so I could use some help here. I bought a new (used) HD2 yesterday. It is the TMOUS version and I am having every problem I could possibly imagine with it. When I bought it the phone would only boot to the pink T-Mobile screen. It wouldn't go any further than that. I have been able to succesfully able to boot it into the 3 color bootloader screen and am able to flash HSPL using the HSPL4 program. I have successfully flashed both 2.08 and 3.03 HSPL. One time I was even able to flash MAGLDR 1.13 but when it booted into MAGLDR it only showed a black screen with MAGLDR at the top. It didn't give me any options to do anything. I believe that it is because MAGLDR only works with radio 2.15 from what I have read, but I can't seem to get that radio or any other for that matter to flash to the phone. It gets stuck at 96% then I get a connection error. I have no idea what radio it currently has or had as I have done a task 29 a couple of times and it flashes correctly but doesn't change anything. I have tried it on two different computers using 2 different operating systems (XP, WIN7). I have searched until my eyes bleed and done everything I can think of I have been working on this for a little over 12 hours now and I am ready to throw this phone against the wall, so could someone please help me save my sanity and get this thing working or at least tell me that I am SOL and nothing I can do will fix it.
Edit well now I think it is officially bricked. I tried flashing Radio Leo 2.15.50.14 that I got from DFT_LEO70_RELEASE and it stopped at 16%. The recovery wizard came up and I did exactly what it said and now the phone won' reboot into the bootloader or do anything for that matter.
if you get the 3 colour screen then it likely the phone will work, you need to start from scratch
use this thread http://forum.xda-developers.com/showthread.php?t=611433
I would task 29 then instal a stock rom, if that works and it should providing you have not installed an incorrect radio, then consider a custom rom
Have you tried pressing and holdingthe up and down Volume buttons and then press the power button?
The 2.15.50.14 would not normaly brick the phone iirc
time patience and following the instructions is what you need, Good luck
Hi, I had "HD2_NDT_MIUI_GINGER_2.3.7_DEVELOPMENT_V48.0_MAGLDR" rom on my phone.I wanted change it to "MIUI.us-ICS-Leo-2.7.13-HWA".First I made task29, then i installed magldr but screen freezed on magldr menu. Then i made task29 again and installed clk 1.5 this time.After edit setting, i press recover but appeared error on screen. Then i tried winmo but it stopped on different percentages (2,15,30 ,...)
I used HSPL 3 & 4 but nothing happend.I couldnt go in recovery mode in both of magldr & clk mode.
And now my phone is dead. I couldnt make task29 sometimes. I couldnt install any version of android and winmo.
Please help me.
goldfly90 said:
Hi, I had "HD2_NDT_MIUI_GINGER_2.3.7_DEVELOPMENT_V48.0_MAGLDR" rom on my phone.I wanted change it to "MIUI.us-ICS-Leo-2.7.13-HWA".First I made task29, then i installed magldr but screen freezed on magldr menu. Then i made task29 again and installed clk 1.5 this time.After edit setting, i press recover but appeared error on screen. Then i tried winmo but it stopped on different percentages (2,15,30 ,...)
I used HSPL 3 & 4 but nothing happend.I couldnt go in recovery mode in both of magldr & clk mode.
And now my phone is dead. I couldnt make task29 sometimes. I couldnt install any version of android and winmo.
Please help me.
Click to expand...
Click to collapse
Isnt anyone to guide me?!!!!!!!!
Flashing and doing task29 multiple times are harmful for any ROM . Every ROM has a read write life.
Anyways, just download the winmo from HTC site for your mobile.
Go to the tri color screen, and connect your mobile . USB will be shown in your mobile once connected.(I hope you have necessary drivers installed...if not install windows mobile device centre.)
And flash the ROM. N be patient....it may take some time..10..15mins. Just wait.
Sent from my T-Mobile HTC HD2 using XDA Premium.