Related
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Did you try reading the flashing instructions. Refer to the Flashing NAND Android rom link in my signature. The problem is that you probably have the wrong radio. Also please don't start new threads to ask questions when threads already exist. This thread will soon be moved.
Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
remove battery
enter HSPL via bootloader (have you got HSPL 2.08)??
(long press volume down + briefly press power button)
btw wrong post here mate
Moved to HD2 Android Q&A and General
I got the same problem with SPL 2.08.HSPL, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
sanroman said:
I got the same problem with HSPL 2.08, oficial ROM 3.14.412.2, RADIO 2.15.50.14. I've tried everything, wasting tons of hours, reinstaling diferent versions of MAGLDR and so, but unfortunatelly I've had to back to the oficial ROM.
Help Please!
Click to expand...
Click to collapse
Are you sure your spl version is 2.08.hspl and NOT 2.08.0000?
Completly!. SPL-2.08.HSPL as stated on tricolor screen. Thanks for the response.
And you also sure of the radio version? Really strange that it doesn't work. Where exactly does it get stuck, is it after or during the install of magldr?
Absolutely sure. All info is the one shown in the device. MAGDLR installs perfectly at 100%, it stucks at reboot, it shows the white htc screen and that's all, the device doen't work any more and I've to reinstall oficial rom.
Really weird - first one I've seen where 2.08.hspl and 2.15.50 radio doesn't get magldr to boot. Not sure what else to suggest apart from perhaps doing a Task29 to format the NAND area and starting all over.
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
There are the Android versions that run off sd card which run as a dual boot with winmo.
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
Check your radio version - I had the same issue but after updating my radio everything was fine!
sanroman said:
I've tried one again, including task29 at begining. And i'm still the same, MAGLDR doesn't show the menu and stucks at login htc screen. I want to cry!. I'd appreciate any idea. All DFT needs MAGDLR, I need smthing that doesn´t need MAGDLR, is it possible?.
Click to expand...
Click to collapse
well, maybe its kinda "stupid" question, but do you press the power (red) button while booting? I mean, you have to press it long enough, till the magldr menu comes up..
Believe me that i've tested that way, and another ones, so as to get it work, but no luck.
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
mikelt89 said:
I got stuck on the htc logo screen while trying to boot to a previous NAND version I had. I flashed it right away for the first time but now I jsut got stuck on the logo screen an than its reboots, again and again. any help as now I stuck with the MJD CyanogenMod which I have few problams with and I am trying to boot again to hd2one CyanogenMod .
Click to expand...
Click to collapse
Format the sd card. I would also suggest flashing back to a winmo rom and then starting over.
chpelle said:
Check your radio version - I had the same issue but after updating my radio everything was fine!
Click to expand...
Click to collapse
Rerereinstalled and no luck. Why me?
I have the same problem. I have checked the radio and everything to make sure it is fine but still getting stuck at htc screen??
Can someone help me please
Thanks
cwm recovery
flashed cwm recovery update for hd2 no my phone wont charge nor register when plugged into the computer. is there a way to fix this
So, I have installed HSPL 2.08. I flashed ChuckyDroid and it worked fine but I wanted more. So I flashed an Omega rom and it was cool but now I want to Flash Magldr1.3 and try wm7 or a nand android. The problem I am having is, when I start to flash the new rom, I get the HTC screen and 0% and it stays there forever. I end up pulling the battery and resetting the phone. I first tried with Mgldr then a few other wm6.5 roms with the same problem. Why can't I flash roms anymore?
I searched the thread and had no luck. I apologize in advance ir this has been covered before.
Try to flash stock Rom from tricolor or even from Your microSD card. And then hspl, magldr etc.
AzOutlaw said:
So, I have installed HSPL 2.08. I flashed ChuckyDroid and it worked fine but I wanted more. So I flashed an Omega rom and it was cool but now I want to Flash Magldr1.3 and try wm7 or a nand android. The problem I am having is, when I start to flash the new rom, I get the HTC screen and 0% and it stays there forever. I end up pulling the battery and resetting the phone. I first tried with Mgldr then a few other wm6.5 roms with the same problem. Why can't I flash roms anymore?
I searched the thread and had no luck. I apologize in advance ir this has been covered before.
Click to expand...
Click to collapse
How about this way.
Assuming you still can reach Boot Loader and You still have SPL 2.08 HSPL installed.
Go into bootloader screen and connect your phone using usb, and let the word: "serial" in the below of phone (the white color bar) changed to: "USB". If you fails, retry it using different ports, and dont forget to turn off your antivirus, firewall and internet connection, or even your screen saver.
While in bootloader, do "task 29", flash radio 2.15.xxx, install magldr 1.13 (all in sequence).
Assuming you succeed it. Now, we go into flashing NAND WP7 (or NAND Android).
Assuming that you already have NAND WP7 (or NAND ANDROID).
Go into magldr screen, you know how to do it right?
There, select option 5 (USB Flasher) and confirm it by pressing the phone call (green) button and connect your phone using usb to pc.
Run your NAND WP7 (or NAND ANDROID) rom.
Finish.
Good luck
Hey Guys,
I have NFI what happened to my phone but I think its bitten then dust..
I've been running NAND Android builds for a while now, the phone has been a bit funky for a few weeks now so I wanted to completely wipe and start form scratch..
So I download Task29 a new radio and ROM from the links in the ROM page (http://forum.xda-developers.com/showthread.php?t=933951) and ran Task29 like I have multiple times before.
The install went fine, and the phone rebooted like its meant to but now its stuck on the HTC screen, I can't boot in MAGLDR or HSPL...
So, is it borked??
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
samsamuel said:
suitable radio? suitable spl? both are critical. magldr wont work without 2.08.hspl and a ..50.. radio
Click to expand...
Click to collapse
The radio that was installed on before running TASK29 was, Radio Leo 2.15.50.14.
It already had HSPL v2.08 and MGLDR 1.3, already installed.
As I said, I've flashed new WinMo and Android ROM's hundreds of times, I mean I dont normally run Task29 before every install but I have multiple times in the past.
I only ran Task29 today as the phone was being really bad so I though a clean install might be the best way to go.
hmm, not sure what to suggest without sounding patronising, hehe,
there are a few people that cant seem to get magldr to start, for no good reason,
reflash the radio (just in case) manually go check the spl in bootloader again (just in case it doesnt say 2.08.hspl,, sometimes what you know for a fact is true actually isnt) and as for magldr, well its susceptible to all the usual flashing issues, , run as administrator, try every usb port, turn off your firewall,,,, try another pc even, , in fact if you have another pc available, try that first.
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
I've read something about this before. I don't think it's an easy fix and it may be best to try go back to where you bought it and try get a replacement or send it in to HTC. I'm not too sure if they'll know that you have HSPL installed. I'd say highly likely they will. Have you tried hard resetting? Or can you not get to that screen?
If you want to find more on this just google "HD2 Wsod" or "HD2 White screen of death". You'll find lots if people with the same thing.
My HD2 has something similar but I can get to HSPL but it stays at a blank white screen with normal power on.
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Skellyyy said:
What happens when it's off snd you plug in the USB? Does it try start because of MAGLDR or just charge/do nothing?
Click to expand...
Click to collapse
Thanks for the reply, when I plug the USB cable in while the phone is off, only the charge light comes up. Doesn't actually try and boot
QuazzieM said:
Thanks for the replies, but I can't get it to boot into MGLDR or SPL thats my problem.
When I turn it on it loads up the 1st HTC logo and hangs.
Is there another way that I can flash a radio of I cant boot into SPL???
Click to expand...
Click to collapse
I know you said you ha e flashed hundreds of times, so you should know this. I am not being patronizing here either, but I will say it anyway. You have gwo different ways to flash a new radio, but both require gou to put gour HD2 into bootloader.
To put your HD2 into bootloader turn the device off and then turn it back on but hold the volume down button wbile it is booting and it will go to bootloader.
Whilr jn bootloader connect via USB cable to gour computer wait until you see USB the wbite bar of bootloader then you can flash the radio, a Win Mo ROM, HSPL, or MAGLDR just wich ever one uou want to flash at that time.
You can use a 500MB to 4GB SD card to flash the radio as well as a Win Mo ROM. You just rename the.nbh file to leoimg.nbh for the radio or the ROM and copy it to the root of your SD card. plasce the SD card back in the device. Put the device into bootloader but do not let go of the volume down botton until you see search hinge on the screen of the device. Be aware though if you flash a official ROM this way it will overwrite everything HSPL and all so you whind up with a stock HD2 again.
Stupid question: you are holding down the volume down button to boot into HSPL right?
Hi
I have followed a description how I could install android on my phone
http://forum.xda-developers.com/showthread.php?t=893948
All workss fine until I have to enter the MGLDR menu with a long push on the power button... I dont enter any menu!! I have tried a lot of times without luck.
I have the latest Radio version 2.15.50.14
and the HSPL version 3.03 HSPL
What have I done wrong since I cant enter the menu?
If I remember right, you need to have hspl 2.08 on your phone for MGLDR to work. Try finding MGLDR thread and see if I'm right. Or just change your hspl to 2.08 and see if you can get the menu, remember, hold the power button til the menu shows then let go. It won't show just by holding the button for longer then normal power on push.
Sent from my HTC HD2 using XDA App
yea, gotta be 2.08.hspl no other will do. Its is step 2 of the instructions you linked to, i can see how your mind may have wandered so far into the process, ,
hehe
Thanks a lot to both of you now it works.... and yes I may have to fast since I didnt see the correct version.
)
hi guys, having a similar problem with my phone atm. I have 2.08 hspl and the right radio, i just cant enter magldr menu at all? holding down the power does nothing, it just boots the phone with no menu at all.
Brandon911 said:
hi guys, having a similar problem with my phone atm. I have 2.08 hspl and the right radio, i just cant enter magldr menu at all? holding down the power does nothing, it just boots the phone with no menu at all.
Click to expand...
Click to collapse
When you say "it just boots the phone",,, how far does it get?
samsamuel said:
When you say "it just boots the phone",,, how far does it get?
Click to expand...
Click to collapse
to the o2 blue initial screen, thats it :s
right, and at the end of that screen should flash up magldr, which indicates it either didnt take, or there is a mismatch with spl/radio.
id start over, into bootloader, check and double check it says 2.08.hspl and nothing else, flash a known good radio again, then flash magldr again.
If it hasnt taken again, or you get any kind of error when flashign teh radio, its just possible theres a stuck radio issue, which prevents anything else from flashing. there are threads where flashing looks to work but nothing actually changes.
to test for that, try changing the spl with hspl4, doesnt matter what you change it to, just change it, reboot, into bootloader, make sure it changed.
Failing that, its stock winmo from sd card time, and start truly over.
could you possibly link me to the right stock rom? im on 02 hd2 in england, ill flash it via sd card with the nbh file. im having so much trouble getting hold of it, im litteraly tearing my hair out, becuase i think ill have to start over after all, last resort. thanks so much if you can
Brandon911 said:
could you possibly link me to the right stock rom? im on 02 hd2 in england, ill flash it via sd card with the nbh file. im having so much trouble getting hold of it, im litteraly tearing my hair out, becuase i think ill have to start over after all, last resort. thanks so much if you can
Click to expand...
Click to collapse
if you're sure you have the right radio and HSPL 2.08, and you're having issues, just perform a task 29, it will format the internal rom partition of the device, then reflash MGLDR 1.13 it will respond then, flash CWM, and desired rom.
Task 29 will help you prevent having to go back to stock.
Hi folks,
I tried to flash my HTC HD2 for the first time. Read /watched different guides. In first 2 steps they were all the same:
- install HSPL
- instal MAGLDR
Done both, got positive responses on both.
BUT: after rebooting after installing MAGLDR I do not manage to get the bootloader screen. There´s just a white screen with green htc logo on it and nothing else happens.
Yes, I held the power button after reboot; about 1 min long. Nothing.
If I hold volume down button after reboot the stripey screen appears like after the HSPL installation. But there is also no menu.
Also tried to proceeed task29 with the HD2 Android NAND Toolkit. Got positive response there too and after this I begann from scratch. With the same results.
Does anyone have a clue what I made wrong or forgot?
Or a hint what to do now?
best regards
M.
What version hspl n magldr?
Sent from my LG-P999 using XDA App
and radio,
hspl MUST be 2.08.hspl ONLY
radio MUST be 2.xx.50.xx
Got hspl version 2.08.hspl from http://forum.xda-developers.com/showthread.php?t=611433
got MAGLDR version 1.13 from http://forum.xda-developers.com/showthread.php?t=893618
cant remember the full radio version but I checked it before starting and it fits to requirements.
But I´m a few steps forward...
Meanwhile I flashed the newest Original HTC HD Win Mobile 6.5 ROM so phone boots up again
After that I installed HSPL version 2.08.0000 (now I know that was a failure) an tried again to install MAGLDR. But the progress bar doesn´t move - neither on PC nor on phone...
So I first will try to install again HSPL like samsamuel said and try again with MAGLDR
[EDIT]
Radio Version is now 2.15.50.14
SOLVED
Don´t know why but after dooing all step again (after falshing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
MiMo99 said:
Don´t know why but after dooing all step again (after flashing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
Click to expand...
Click to collapse
the only regular hd2 stock rom that includes a magldr compatible radio is 3.14, so if the ''old rom'' you flashed was any other version, it will have also flashed a non magldr radio, which is why it happened. (I suspect).
Sorted now,
the same problem
Hi,
I have the same problem.
Just white screen with green HTC mark.
But I'm not shure how to flesh win mobile again, because I cannot connect my HTC HD2 via USB (PC doesn't recognise the phone).
tnx
Hey MiMo,
Could you please post links and steps to help myself and anyone else looking on how to fix this?
by links I mean can I have the stock rom you used and the radios and such
Thank you.