Database Users

My phone is dead after unistalling HSPL

Hello!
I tried to unistall HSPL from my HD2 by installing 1.66 ROM from Sunnysoft. I put leoimg.nbh on my memorycard and got into bootloader mode to install this rom. At the beginning everything was fine, i pressed the power buton and installation started but after a few seconds a screen with 4 colours appeared. And now, nothing can bring my leo to life: hard reset, task29, installing rom directly from usb or doing again this process. I don't know what to do . Help me, please. (I want to sell this phone)

It seems that you have interrupted you update-process which is not good...
Try this: Another try from your SD, don't worry if it switches on and off while the progress; it is finished, when there's "Update SUCCESS"on your screen", before you shouldn't touch it.
If it does not work, install HardSPL again; bring phone directly into bootloader-mode (coloured stripes) and run HSPL2, install some ROM; I guess your failed update has already brought you back stock SPL, so that you cannot use RUU or Task29.

I waited a long time (2 hours) after this 4 colour screen appeared and nothing happened. But i'll try installing HSPL one more time. Thank you for the reply. I'll post a reply if it works.

Ok, it helped but when i again tried to install 1.66 from sd card, again after installing the first part appeared OK and then phone restarted and appeared the inscription: Not allowed and again 4 colour screen
Could I unistall the HSPL by installing 1.66 ROM by usb cabel not by sd card?

No, you can't. Try another SD. And again. Do not touch your phone once the process has been started. Take out the battery when there is "SUCCESS" on the screen in highlighted letters. Then put it back in again and normally start your phone.
EDIT: Make sure, that you really take the ROM that you originally had on your HD2 (branded, unbranded, aso.), no matter what version.

I need your help please! Bricked hd2???

OK, I received a T-Mobile hd2 that was and still is stuck on "stick together " screen. I tried the reset button on the back, taking out the battery, checked for bents battery pins, and I downloaded 2 "official" .exe roms and renamed to zip and extracted.the nbh file and renamed to leoimg.nbh and tried to flash them.via a formatted fat32 2gb SD card and only one worked, kind of but gets stuck at like 15% of the way?? For like 10 min..I just pulled the battery. .I tried it twice..Please help me out here..this is what is says on the bootloader screen if that helps??
PB81120. SS-B3
SPL-2.10.0000 8G XE
MICROP(LED) 0X05
MICROP(TOUCH) 0X50
AND NOW IT SAYS THIS (ON THE GREEN PART OF THE BOOTLOADER SCREEN), AND THIS IS AFTER THE FAILED FLASH THAT I TRIED..
"UPGRADE ROM CODE ERROR PLEASE TRY AGAIN" ?
Is that just saying that the flash failed?? Or something else??
Please help me out guys...as you can see I'm kinda desperate and exuasted in trying to get this.hd2 working again!! Preferably ANDROID FROYO..THANKS IN ADVANCE!!!

You need to make sure you are flashing the correct stock ROM. Try downloading and flashing the official T-Mobile US 2.13 ROM, that SHOULD get you back to working. Everything you are doing is correct, Fat32 formatted SD card, under 4GB....nice job searching before posting, that is to be commended. Anyways, try the 2.13 ROM and let me know what happens.

Have you tried a hard reset? Or task 29 while in bootloader mode?
Sent from my T-Mobile G2 using XDA App

Ok i tried the 2.13 rom and it flashed and said success! but then it just stayed at that screen?? so i pressed the reset button on the back and now its back to the stuck "stick together" screen!! ??? should i have waited till it rebooted after it said "succes "?? i waited like 5 min and nothing and i just pressed the reset button..or should i have taken out the battery??

Yeahhh...you may have jumped the gun a little bit...after is says success, it takes like 10 more minutes for the ROM to set everything up. Go into bootloader and try flashing it again with the stock ROM and wait for at least 10 minutes and see what happens.

OK ill try that if I get lucky enough for that successful update..LOL
But I flashed a hspl2 (2.08) and can't I just flash away?? (USB..bootloader mode) ?? Since the phone is always stuck on the bootloader screen..
I just open the exe flash program and connect my hd2 in bootloader mode and I get the USB mode on the bootloader screen and I flash away..but it but it always stops at a certain point...mostly 8%..???

Yeah you can just flash away like usual. HardSPL isn't required to flash an official ROM anyways.

what am i doing wrong!!?? i tried ,many roms but hang at 8% 95% of the time?? i tried kumars tmous v2.9 s23139 se rom, the ruu_leo_1_5_tmous_2.10.531.0_radio_15.34.50.07u, and T-Mobile_HD2_MR_Software_2.13.531.1, all stop at 8%???!! ...i always do task29 after every failed rom to be clean and start over..thats right..right??
i have the hspl 2.08
i have a feeling im flashing an incompatible rom that requires a different radio rom??
please give me a link to download the right rom...thanks

1st post, rom 2.13
http://forum.xda-developers.com/showthread.php?t=655653

i feel for ya man, i keep getting up and running , every thing runs fine, i get it to survive a few reboots, then dead.... stuck at the boot screen.
i cant wait for a solution to android running natively...

I tried but hangs at 8%????

i tried many other roms, kumar, core cell, official tmobile us roms, they all either stop at 0%, 1%, 8%????? im going crazy here!!! whats going on?? i have hspl 2.08 and i do a task29 before every flash, but the wierd thing is that it doesnt auto reboot after task29?? it should, right?? and even after a hspl3 flash it doesnt reboot, the phone use to reboot automatically after one of those??? no i have to take out the battery for 15 seconds and put it back for it to boot again into bootloader?? and wierd thing is that sometimes if a flash fails and when i get it the hd2 to turn back on and if i do the hard ereset (volume up and down and then press up to reformat) it then reboots and hangs at the boot image of the last failed flash?? i thought when i do a task29 everthing should be erased???
guys im about to LOOSE IT!! i have tried to flash this phone already like 100 times int he past 3 days, no joke!!! 2 times it reached 100% but even after it rebooted and i did a hard reset it would hang at the boot logo?????
please guys help me out!!! and im the type of guys thats not gonna stop unless it breaks or someone takes the phone away from me...lol

naiefelyemeni said:
i tried many other roms, kumar, core cell, official tmobile us roms, they all either stop at 0%, 1%, 8%????? im going crazy here!!! whats going on?? i have hspl 2.08 and i do a task29 before every flash, but the wierd thing is that it doesnt auto reboot after task29?? it should, right?? and even after a hspl3 flash it doesnt reboot, the phone use to reboot automatically after one of those??? no i have to take out the battery for 15 seconds and put it back for it to boot again into bootloader?? and wierd thing is that sometimes if a flash fails and when i get it the hd2 to turn back on and if i do the hard ereset (volume up and down and then press up to reformat) it then reboots and hangs at the boot image of the last failed flash?? i thought when i do a task29 everthing should be erased???
guys im about to LOOSE IT!! i have tried to flash this phone already like 100 times int he past 3 days, no joke!!! 2 times it reached 100% but even after it rebooted and i did a hard reset it would hang at the boot logo?????
please guys help me out!!! and im the type of guys thats not gonna stop unless it breaks or someone takes the phone away from me...lol
Click to expand...
Click to collapse
Did you have Android loaded on that same microSD card? Does it hang if your microSD card is out.
After you task 29 it should auto reboot, then you press Volume Down and Power to get into bootloader. Have you tried flashing from your PC via USB? If you are flashing form the card a stock rom, it will overwrite your HSPL to Stock SPL. You probably know this. Also if you flashed 2.13 then you need to install HSPL3 and not the original HSPL program. 2.13 has 2.10 firmware. HSPL only supports 2.8 firmware.
I've always heard when it hangs on boot up that it's usually something on your card.

it never had android, i got it with the stock firmware and it was messed up, stuck on "stick together" screen..and i never have the sd while im flashing via usb in bootloader.. i tried many roms, and task29 followed by hpsl3 and then i would flash custom roms and even stock roms but all fail?? all stop at like 8%, but the wierd thing is that even the task29 sometimes fails at 0% so im suspecting maybe its from windows 7? but i did try xp and the samething, the roms would stop usually at 8% or 0%??? ...weird?
ok i kinda fell like my mind is cluttered and confused..
i want to know, please..what rom is compatible with my current tomobile hd2 with hspl 2.08 colutta
so what rom should work fine?? with no problem?? and DOES IT MATTER WHAT MY RADIO ROM IS?? i have a feeling that if i have a older radio that it will interfere with the rom???

Ok i got it to accept a rom flash from sd card!! But it just stayed at the "update complete, update success" white screen??? I waited over 10min the i did a reset and hard reset...and now stuck at the boot logo??? I heard i might need a higher radio??? 2.10 or higher?? Is this why its not booting up?? Can i flash the radio through sd card??

naiefelyemeni said:
Ok i got it to accept a rom flash from sd card!! But it just stayed at the "update complete, update success" white screen??? I waited over 10min the i did a reset and hard reset...and now stuck at the boot logo??? I heard i might need a higher radio??? 2.10 or higher?? Is this why its not booting up?? Can i flash the radio through sd card??
Click to expand...
Click to collapse
You can flash a radio, just like a rom form the microSD card...

is there such a thing as a wrong radio version for a rom or "required" radio version for a rom?? will that cause the phone not to boot up???

naiefelyemeni said:
is there such a thing as a wrong radio version for a rom or "required" radio version for a rom?? will that cause the phone not to boot up???
Click to expand...
Click to collapse
I've never had issues using any Radio with any ROM really. Some combos work better than others but won't cause your problem. If I were you I would task29, then flash the 2.13 or the new 3.14 shipped ROM via microSD to take the SPL back to stock. Then I would flash HSPL3, then reflash a Custom ROM or the Stock ROM via USB. Then do a couple hard resets after that. If that doesn't work I'm thinking Hardware.
You can use any of these radios. http://www.4shared.com/dir/RFg27UmU/Radios.html Doesn't matter what ROM you are running.

Wtf!! I tried to restore the stock tmous roms (2.13 and the latest 3.14) and all would stop at 8%???? And i reverted back to stock 2.08 spl..still hangs at 8%??? But if i flash that core cell rom...itll say success 100%..??/ why???? Man this freakin hd2 is makin me go crazy...hardware issue maybe??

come on guys?? please help, its been like 10 days no reply...

Possibly bricked HD2, please help.

Hey, so I have an HD2 that was flashed badly. No problem, enter bootloader, reflash, right?
Strangely enough, it was acting strangely, and would freeze while in bootloader mode (plug in, nothing would recognize it, plug out and USB is still on the screen).
I pull the battery, try again, and get to flashing the Radio, it stops at 96%, and then fails. Try to do the recovery, but when I restart it, I a triangle with an exlamation mark (!), and I can't enter bootloader.
So, is that it...?

Oook, so I got into bootloader, flashed the HardSPL ver to 2, trying to flash the radio again, and it's not moving at 0%...

I'm having a similar issue. I have cotulla's HSPL 2.08 and I cannot flash ANY rom, no stock t-mobile, no android, nothing! Someone please help us! I would hate to see our HD2's go in the drawer and be forgotten
T-MOUS

boymeetsfence said:
I'm having a similar issue. I have cotulla's HSPL 2.08 and I cannot flash ANY rom, no stock t-mobile, no android, nothing! Someone please help us! I would hate to see our HD2's go in the drawer and be forgotten
T-MOUS
Click to expand...
Click to collapse
By any chance was the existing ROM the 3.14 one?

CrowJA said:
Hey, so I have an HD2 that was flashed badly. No problem, enter bootloader, reflash, right?
Strangely enough, it was acting strangely, and would freeze while in bootloader mode (plug in, nothing would recognize it, plug out and USB is still on the screen).
I pull the battery, try again, and get to flashing the Radio, it stops at 96%, and then fails. Try to do the recovery, but when I restart it, I a triangle with an exlamation mark (!), and I can't enter bootloader.
So, is that it...?
Click to expand...
Click to collapse
Try and flash the stock (or branded) ROM, either by USB or SD method.

No, I installed that update when it came out, seemed to make the phone worse so I went back to 2.13

boymeetsfence said:
No, I installed that update when it came out, seemed to make the phone worse so I went back to 2.13
Click to expand...
Click to collapse
a friend was doing similar ...
he upgraded to cotulla's HSPL 2.08 no problem, but when updating to most recent radio to allow him to play with putty or energy it froze at 96% and now just boots to ! screen
will not acknowledge attempts to SDcard flash, and his attempt to flash with latest stock HTC rom fails at random spots between 1% and 45%
going to grab an old stock rom and try voldown/power into tricolor and downgrade I guess

may have had some success ... seems his sdcard was formatted as FAT not FAT32 (doh!)
put duttys latest on the card and sd flashed that no problems, then put latest radio on card and sd flashed that, made it to 100% but 10 mins later and radio flash attempt still sitting at 'update in progress' with bar at 100%
guess I'll try with HTC stock via sd now
no joy there either ... hangs after attempting to flash the first radio portion

RESULT! seems the root cause was cotulla's HSPL 2.08
Ran HSPL_2 went back to 1.66-HSPL
then installed stock 1.48.405.2 which flashed completely and cleanly
phew

hd2 died help!
i accidentaly flashed an incorrect radio rom and thats where my problem started. although it still vibrates continusly once i put the battery back but im not sure if i can revive this. please help me out.

I managed to flash the latest radio successfully with 1.66-HSPL in place.
I just bullheadedly continually kept reattempting to sdcard flash just the latest radio, maybe 15-20x it either locked or gave me RSA errors.
Just before I was about to fling it into the fireplace, it just *worked* for no apparent reason ...
Just whacked Dutty's latest on there, and now happily looking at the 'tap next to begin screen'

[Q] Stuck on white screen while booting up.

Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?

enadiz said:
Hi guys, I've flashed MAGDLR 1.12 onto my HD2, and have had gingerbread on it for 2 weeks. Then, my screen suddenly turned white and stayed the same after reboot, even after re-flashing MAGDLR. It would not even boot into MAGDLR. However, I was able to enter the default bootloader via Vol-Down while booting. I have tried flashing a few official HTC roms, performing Task29, and downloading the official rom from HTC.com too.
I am currently running HSPL 2.08. Any advice?
Click to expand...
Click to collapse
Try re-flashing HSPL.

I'm having the exact same problem.
I have opened a thread with this question few hours ago
Is there someone who can help us?
@digital outcast
re-flashing hardspl did not make the slightest change... :S

I assume both of you have tried flashing back to a WinMo ROM right? Does that flash to it ok and provide the same end result (white screen)?

in my case, it doesn't even flash because when CustomRUU starts, and the process begins (everything normal), the indicator freezes at 0% until it gives a communication error and all process is aborted!

the indicator freezes at 0%
Click to expand...
Click to collapse
When you flashing WinMo? If not(if you flashing android), I think problem is with wrong radio

And you tried a task 29 beforehand? Do you have any antivirus / firewall software running that you can disable temporarily?

Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!

tpmonteiro said:
Hey there!
I've tried all the methods above indicated.
Flashed a new rom through sd - update failed
Flashed a stock 1.66 Wmo rom but white screen still appears as soon as phone is turned on
Can't downgrade HSPL to 1.42 or so...
Can't do Task 29...
What can I do?
Suggestions?!
Thank you!
Click to expand...
Click to collapse
Ditto, I have not tried the 1.66 Wmo rom though, will try that and MAGDLR 1.13 when I get back home later.
Anyone else who encountered this problem before? Thanks !

Can you go back to WINMO using LEOIMG.NBH and VOL.DOWN?
Can you boot into WINMO6.5 without problems?

Neither!
The update through HSPL is sucessfully completed, but when phone restarts, white screen appears immediately after...
I've also tried to flash other radios (the latest was installed) but the update fails everytime (through hspl).
I had MAGLDR 1.12 installed and it ran before booting the OS (android), but the white screens appears before that.
Damn!!!
Any ideas?

It actually looks like this when I try to flash a stock rom + radio over the SD card.. http://forum.xda-developers.com/showthread.php?t=618084
UPDATE FAIL

hd2 with strange behavior

for me something is very strange:
got a phone with broken display; i changed the display and start the phone. noticed that it has spl 1.42.0000, but if i start normally, not in bootloader, got a white screen
installed hspl 2.08.hspl without problems
after that upgraded radio via usb, no errors, radio 2.15
after that installed magldr, no problems
after that task 29 and with hd2 toolkit installed clk
finally installed cwm and now the strange thing happens: tried to put the battery cover and the phone freeze... when restarted got a white screen!....
what happens?

bmilyze lxiv
klinutzu said:
for me something is very strange:
got a phone with broken display; i changed the display and start the phone. noticed that it has spl 1.42.0000, but if i start normally, not in bootloader, got a white screen
installed hspl 2.08.hspl without problems
after that upgraded radio via usb, no errors, radio 2.15
after that installed magldr, no problems
after that task 29 and with hd2 toolkit installed clk
finally installed cwm and now the strange thing happens: tried to put the battery cover and the phone freeze... when restarted got a white screen!....
what happens?
Click to expand...
Click to collapse
sounds like a hardware failure to me . Better, wipe everything and start doin that from all over again, if you could. update hspl, then magloader then install rom. Or better to go stcok windows just to make sure things are working normal.....

tried already, but stock rom don't flash, gives me an error

klinutzu said:
tried already, but stock rom don't flash, gives me an error
Click to expand...
Click to collapse
did you flash from bootloader screen (threecolor screen)?
which error shows?
also try change USB cable and try on different computer.