Hello everyone. I like CREED V4 and tried installing final build but every time I end up with bootloops. Is this rom fail, or I am doing something wrong?
I followed this tutorial:
1. Flash stock DDLK2 rom as Xicor Yagami said in his thread
2. Boot into CWM recovery
3. Wipe data
4. Wipe cache
5. Wipe dalvik cache (just in case)
6. Wipe battery stats (just in case)
7. Flash CREED V4 rom
8. Reboot
If I am doing something wrong, tell me the right tutorial for installing
After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.
aniket.lamba said:
After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.
Click to expand...
Click to collapse
Still no luck. Have you tried this rom by yourself?
creed v4 installation
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition
anujb said:
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition
Click to expand...
Click to collapse
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot
marcussmith2626 said:
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot
Click to expand...
Click to collapse
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15
anujb said:
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15
Click to expand...
Click to collapse
See ril thread - Link in signature
marcussmith2626 said:
See ril thread - Link in signature
Click to expand...
Click to collapse
I didn,t get you...
anujb said:
I didn,t get you...
Click to expand...
Click to collapse
Click the link in my signature to open up a list of my threads - find the ril thread & read it
marcussmith2626 said:
Click the link in my signature to open up a list of my threads - find the ril thread & read it[/QUOTE
after flashing the ril file for DDMD1 its working
thanks for support
Click to expand...
Click to collapse
Related
hello,
I want to install Aurora ICS 4.03 but I cant.
I have the stock 2.3.5 + a custom kernel so because of that I cant install it!
PLEASE HELP!!!
2.6.35 Kernel.you need to have upgraded to the official gingerbread rom and installed CWM recovery 5.0.2.7
mars_pop said:
2.6.35 Kernel.you need to have upgraded to the official gingerbread rom and installed CWM recovery 5.0.2.7
Click to expand...
Click to collapse
So I need to delete everything
You can't run it on the infuse anyway
Sent from my SGH-I997 using xda premium
Can you give a step guide for how to do it?
you need Cwm 5.0.2.7 firstly you must install it.
you can find document at the link
http://forum.xda-developers.com/showthread.php?t=1420728
selimozbas said:
you need Cwm 5.0.2.7 firstly you must install it.
you can find document at the link
http://forum.xda-developers.com/showthread.php?t=1420728
Click to expand...
Click to collapse
I already have it
copy the rom file to sdcard and turn on your U8800 while holding [VOL+] to load ClockworkMod Recovery (keep holding [Power] + [VOL+] until ClockworkMod Loads
wipe cache , wipe dalvik and install zip from sdcard and select the rom file
selimozbas said:
copy the rom file to sdcard and turn on your U8800 while holding [VOL+] to load ClockworkMod Recovery (keep holding [Power] + [VOL+] until ClockworkMod Loads
wipe cache , wipe dalvik and install zip from sdcard and select the rom file
Click to expand...
Click to collapse
What does Dalvik?
hello jaronstrypsteen,
i had difficulties when i first install aurora ics 4.03. i installed official gingerbread and rooted but i couldn't install custom recovery image. in pink screen i couldn't replace it. first i installed official GB beta rom, so i can replace recovery image,
then i installed CWM recovery 5.0.2.7, and with CWM i installed aurora ics.
if you have difficulties first install beta gingerbread rom.
snc-tr said:
hello jaronstrypsteen,
i had difficulties when i first install aurora ics 4.03. i installed official gingerbread and rooted but i couldn't install custom recovery image. in pink screen i couldn't replace it. first i installed official GB beta rom, so i can replace recovery image,
then i installed CWM recovery 5.0.2.7, and with CWM i installed aurora ics.
if you have difficulties first install beta gingerbread rom.
Click to expand...
Click to collapse
I installed official GB 2.3.5 already.
And the recovery works its just the kernel.
Because of the kernel I cant install Miui/ Oxygen/ CM7/ Aurora ICS.
Thanks anyway
Dalvick cache -> You have wipe dalvick cache in CWM. Advanced > Wipe Dalvick cache > Yes/No.
jaronstrypsteen said:
I installed official GB 2.3.5 already.
And the recovery works its just the kernel.
Because of the kernel I cant install Miui/ Oxygen/ CM7/ Aurora ICS.
Thanks anyway
Click to expand...
Click to collapse
you may try install official gb 2.3.5 or official gb beta again.
PuntPT said:
Dalvick cache -> You have wipe dalvick cache in CWM. Advanced > Wipe Dalvick cache > Yes/No.
Click to expand...
Click to collapse
I mean what is dalvik cache. not how to wipe
selimozbas said:
copy the rom file to sdcard and turn on your U8800 while holding [VOL+] to load ClockworkMod Recovery (keep holding [Power] + [VOL+] until ClockworkMod Loads
wipe cache , wipe dalvik and install zip from sdcard and select the rom file
Click to expand...
Click to collapse
I stays on the boot screen
jaronstrypsteen said:
What does Dalvik?
Click to expand...
Click to collapse
it's like the prefetch files in Windows.
snc-tr said:
it's like the prefetch files in Windows.
Click to expand...
Click to collapse
For android whats all in that folder
jaronstrypsteen said:
I stays on the boot screen
Click to expand...
Click to collapse
i had exactly same problem.
i installed beta gb again, then wiped data, cache partition and dalvik, then replaced cwm again, and installed beta gb again, and wiped data, cache partition and dalvik.
and then i could install aurora ics.
snc-tr said:
i had exactly same problem.
i installed beta gb again, then wiped data, cache partition and dalvik, then replaced cwm again, and installed beta gb again, and wiped data, cache partition and dalvik.
and then i could install aurora ics.
Click to expand...
Click to collapse
I dont wanna install oficial GB AGAIN
jaronstrypsteen said:
I dont wanna install oficial GB AGAIN
Click to expand...
Click to collapse
your choice.
Is there a way to make an update from V1.1a to the newest version without a full flash? I wish to avoid a reinstallation of all Apps and settings
I installed 1.2 straight over the top of 1.1 and it worked no problem, all apps and data unaffected.
Otherwise, do a cwm backup, then clean install, then cwm - advanced restore - restore data.
So you have copied the V1.2 Zip-File on the SD card and flashed the version with 'AD recovery' in MAGLDR?
I have flashed v1.4a, from v1.1a .
I did this:
Copied the ROM to my SDCARD, Backed up current ROM (Just in case), wiped dalvik cache, installed ROM, fixed permissions ('cause I installed an a2sd script), rebooted into ROM.
(Took about 17 minutes) at first.
just done a 1.2a to 1.4a dirty upgrade, no backup/restore, just straight over the top, no fix permissions, nothing, , no problems (well, not in first 4 hours anyway)
Marvlesz said:
I have flashed v1.4a, from v1.1a .
I did this:
Copied the ROM to my SDCARD, Backed up current ROM (Just in case)
Click to expand...
Click to collapse
With wich tool do you do that?
, wiped dalvik cache,
Click to expand...
Click to collapse
How i can do that?
fixed permissions ('cause I installed an a2sd script)
Click to expand...
Click to collapse
I don't understand, what you mean with this point
Sorry for much questions and thanks in advance for your help
Marvlesz said:
... wiped dalvik cache, f...
Click to expand...
Click to collapse
Is that the item 'wipe cache partition' in MAGLDR in AD Recovery?
In cwm choose advanced and you will see wipe dalvik
Yes, i found it, thanks for your help.
Do you think additional work is to do to erase dalvik because i'm using Link2SD? If you display an app in this program the part 'Dex' seems linked to dalvik and has moved for apps which are stored on the sd card.
samsamuel said:
I installed 1.2 straight over the top of 1.1 and it worked no problem, all apps and data unaffected.
Otherwise, do a cwm backup, then clean install, then cwm - advanced restore - restore data.
Click to expand...
Click to collapse
And then you have all App, settings, etc. back on the system?
HTCdevel said:
And then you have all App, settings, etc. back on the system?
Click to expand...
Click to collapse
Yep, they never left the system, there was no wipe,,,phone running fine, on 1.2, downloaded 1.4 using phone, restarted into cwm, ran the flash, rebooted, done. I wasn't even at home, I was on the train.
Admittedly there isn't a huge amount,, maybe 10 apps, and some data, but there was no setting up to do except for the PAD /PAL stuff,, contccts, wallpaper, shortcuts, loclscreen shortcuts, all exactly as it had been 4 minutes before.
Marvlesz said:
...fixed permissions...
Click to expand...
Click to collapse
This point is currently open for me.
What does it mean?
it means start cwm and click advanced - fix permissions
have been doing update just flashing over the existing pa, no problem at all. so answer is yes.
HTCdevel said:
...
Do you think additional work is to do to erase dalvik because i'm using Link2SD? If you display an app in this program the part 'Dex' seems linked to dalvik and has moved for apps which are stored on the sd card.
Click to expand...
Click to collapse
This is, hopefully , my last open issue.
HTCdevel said:
This is, hopefully , my last open issue.
Click to expand...
Click to collapse
Ok, let me clarify a few things for you:
1- I backed up my ROM (Because I was expecting a bootloop, so I did a BU just in case, it's not necessary if you know your ROM's going to boot.)
2- I wiped dalvik/fixed permissions because I use (amarullz d2ext) which requires a clean dalvik & fixing permission, if you don't use that script, you don't need them.
3- Other than that, you can do just like sam, install the update on top of your current rom and you should be good to go.
Marvlesz said:
...
2- I wiped dalvik/fixed permissions because I use (amarullz d2ext) which requires a clean dalvik & fixing permission, if you don't use that script, you don't need them...
Click to expand...
Click to collapse
Is amarullz comparable with Link2SD, then i must do it in the same manner?
I have tried it before a few minutes, but it fails in a bootscreen with the HTC logo. Android doesn't start.
What i have done:
1) Copied the file paranoidandroid_hd2_v1.4a.zip to the SD card,
2) Enter MAGLDR
3) AD Recovery
4) Wipe Dalvik, fix permissions
5) Install Zip from SD card
6) choose Zip from SD card
7) choose the Zip and confirmed it
I have made a backup so i could restore the system and everything is like before.
Fix permissions AFTER installing the rom. There's nothing to fix until then.
Marvlesz said:
I have flashed v1.4a, from v1.1a .
I did this:
Copied the ROM to my SDCARD, Backed up current ROM (Just in case), wiped dalvik cache, fixed permissions ('cause I installed an a2sd script), installed ROM, rebooted into ROM.
(Took about 17 minutes) at first.
Click to expand...
Click to collapse
Thanks man for this. When i flash new rom, i did these steps:
Task29
Install Magldr
Partition
Wipe all data/factory reset
Wipe partition cache
Wipe Dalvik cache
Flash ROM
Flash update, addons if nessessary (Do i need reboot before do this step?)
Now i know when use wipe dalvik cache.
I read somewhere about task29 many times make the phone "bad blocks". I did it hundred time when flash new ROM
May i flash new ROM without task29 & install madglr, just do from step 3 above?
Thanks all.
I tried installing Repencis v3.5 and i've been doing it the right way. flashing to stock then installing this. followed all the directions perfectly. Why am i stuck at the samsung logo?! how to do this?
Same thing happened to me when i first installed repencis. First remove the battery, wait for 2-5 mins, reinsert it and go to download mode. Then flash the stock firmware.
Then for installing repencis go to cwm, and don't wipe data or cache! First install the rom. When it finishes, then do a data and cache wipe. It's different from the steps of installation of other roms.
Code:
System.out.println("Sent from my SGY");
neilerzzzz said:
I tried installing Repencis v3.5 and i've been doing it the right way. flashing to stock then installing this. followed all the directions perfectly. Why am i stuck at the samsung logo?! how to do this?
Click to expand...
Click to collapse
im on repencis,, do this
wipe cache and data/sd card partition in default CWM.
then use CWM given by mr repencis, its "CWMbla..bla,,"
then wipe data and cache agian,
go to mount sys and data, mount those two,, its wrote like this "unmount data/unmount sys"
then install,,
wait after installation complete,,
then,,wipe again the data and cache,, then you may reboot,
I am using GT S5360. I have installed reincarnation pre final and it didn't passed the screen where samsung galaxy Y GTs5360 comes.
I followed the whole procedure but not working. Any help ???
Did you flash kernel?
Mount system?
Remember that naturalizer or touchwiz rom isn't for galaxy y
after you flash percys cm#2 kernel you must reboot to recovery and wipe system data and cache before you flash the rom
the steps are as follows
go into cwm
mount system
flash percys #2 kernel
reboot to recovery
format system data cache
mount system data cache
flash rom zip
format data
restart
if the rom still doesnt boot after that take out your sim card
if the rom now boots you need to change your baseband by flashing a different stock rom firmware via odin
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Honey_singh said:
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Click to expand...
Click to collapse
Do this :
1.Go to CWM,mount all the partitions and flash the kernel.
2.Reboot the system and take out the battery and then put it again
3.Again boot into cwm and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount all the partitions
6.Flash the rom and after that wipe data
7.Reboot
And burrrrrah!
Your new rom is ready!
Honey_singh said:
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Click to expand...
Click to collapse
go back into cwm and format data and restart
did you mount system data and cache before flashing the zip?
have you tried it without the sim card inserted?
aniket.lamba said:
Do this :
1.Go to CWM,mount all the partitions and flash the kernel.
2.Reboot the system and take out the battery and then put it again
3.Again boot into cwm and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount all the partitions
6.Flash the rom and after that wipe data
7.Reboot
And burrrrrah!
Your new rom is ready!
Click to expand...
Click to collapse
Nthing happened
Still it stops at galaxy y gts5360 screen
marcussmith2626 said:
go back into cwm and format data and restart
did you mount system data and cache before flashing the zip?
have you tried it without the sim card inserted?
Click to expand...
Click to collapse
Yes, I mount the system and cache
Honey_singh said:
Nthing happened
Still it stops at galaxy y gts5360 screen
Yes, I mount the system and cache
Click to expand...
Click to collapse
have you removed the sim card and see if it booted - please do all the steps I mentioned
cm kernels working fine but
stock and stock based kernels giving this error .
how can i solve this problem? ?
error is
cant mount data
cant mount system
invalid argument
cant recovery last cache
going like this help pls (((
First format system,data and cache.Go to advanced and wipe dalvik cache and battery stats and then mount data and system.
(
aniket.lamba said:
First format system,data and cache.Go to advanced and wipe dalvik cache and battery stats and then mount data and system.
Click to expand...
Click to collapse
before installing or after installed?
because i cant format system
its giving this error
cant mount system
skipping format system
done.
??
denizarca said:
before installing or...
Click to expand...
Click to collapse
1st download the below file & put it in /sdcard/firmware/ (u ve to make a folder in the root of sdcard & name it as "firmware" .
then go to recovery, install zip from sdcard, then choose CWM, then in CWM install zip from sdcard & install the zip u ve downloaded in the /sdcard/firmware/ .Then install any rom.
note: this zip package format ur system/data/cache
1)Easy way without pc to solve the issue download multiformatter.zip (search forum) flash this zip in cwm it will open aroma installer follow the instructions and format the partitions to rfs. Close aroma mount everything and flash any rom.
2) Flash stock rom via odin. (PC reqd.)
___________________________________
««||Proud to be a geek. #lovexda||»»
good
Souroking said:
1)Easy way without pc to solve the issue download multiformatter.zip (search forum) flash this zip in cwm it will open aroma installer follow the instructions and format the partitions to rfs. Close aroma mount everything and flash any rom.
2) Flash stock rom via odin. (PC reqd.)
___________________________________
««||Proud to be a geek. #lovexda||»»
Click to expand...
Click to collapse
way 1 working fully thnxx
denizarca said:
way 1 working fully thnxx
Click to expand...
Click to collapse
No need to tell it.
Just press it...[emoji6]