I tried installing Repencis v3.5 and i've been doing it the right way. flashing to stock then installing this. followed all the directions perfectly. Why am i stuck at the samsung logo?! how to do this?
Same thing happened to me when i first installed repencis. First remove the battery, wait for 2-5 mins, reinsert it and go to download mode. Then flash the stock firmware.
Then for installing repencis go to cwm, and don't wipe data or cache! First install the rom. When it finishes, then do a data and cache wipe. It's different from the steps of installation of other roms.
Code:
System.out.println("Sent from my SGY");
neilerzzzz said:
I tried installing Repencis v3.5 and i've been doing it the right way. flashing to stock then installing this. followed all the directions perfectly. Why am i stuck at the samsung logo?! how to do this?
Click to expand...
Click to collapse
im on repencis,, do this
wipe cache and data/sd card partition in default CWM.
then use CWM given by mr repencis, its "CWMbla..bla,,"
then wipe data and cache agian,
go to mount sys and data, mount those two,, its wrote like this "unmount data/unmount sys"
then install,,
wait after installation complete,,
then,,wipe again the data and cache,, then you may reboot,
Related
So when I root my phone using this method: http://forum.xda-developers.com/showthread.php?t=858996 (TRUE PermaRoot and the ULTIMATE S=Off) and then comes time to install the ROM and with that the Kernel... in this case: "MIUI 1.6.24 demonSPEED v1.1" it is recommended that I also update the kernel to "demonSPEED INSANITY v2.0"
So I wiped everything and then flashed the ROM and then shutdown the phone and then booted into recovery and then wiped everything and then flashed the kernel.
My question is: Did I do this correctly or should I have done something different.
Here is my hboot info after I rooted my phone:
GLACIER PVT SHIP S-OFF
HBOOT-0.85.2007
MICROP-0429
RADIO-26.03.02.26_M
eMMC-boot
Sep 27 2010, 11:12:59
Your results posted only show that your phone has root and s=off. When flashing a rom wipe everything (wipe data/factory reset, wipe cache partition, advanced then wipe dalvike cache, then flash rom. After flashing the rom wipe cache partition and dalvik cache again then install custom kernel. Eveything can be done in recovery.
Sent from my Acer Iconia Tab A500 using XDA Premium App
I do understand that everything can be done in recovery.
I guess my question is that after I flashed the ROM (after wiping everything of course)... should I shutdown the phone and then start back into the recovery right away and then wipe everything and then flash the kernel or should I let the phone start up normally after the ROM wipe and then shutdown and reboot into recovery followed by wiping everything and then flashing the kernel?
Or can I do both (ROM and Kernel) like this:
1) Boot into recovery.
2) Wipe Everything
3) Flash ROM
4) While still in recovery wipe everything
6) Flash Kernel
7) Reboot.
aybe said:
I do understand that everything can be done in recovery.
I guess my question is that after I flashed the ROM (after wiping everything of course)... should I shutdown the phone and then start back into the recovery right away and then wipe everything and then flash the kernel or should I let the phone start up normally after the ROM wipe and then shutdown and reboot into recovery followed by wiping everything and then flashing the kernel?
Or can I do both (ROM and Kernel) like this:
1) Boot into recovery.
2) Wipe Everything
3) Flash ROM
4) While still in recovery wipe cache partition and dalvik cache (in advanced)
6) Flash Kernel
7) Reboot.
Click to expand...
Click to collapse
See minor change in step 4...After reboot I would open ROM manager and select fix permissions and reboot then u will be set....other than that you got it
Sent from my Acer Iconia Tab A500 using XDA Premium App
aybe said:
I guess my question is that after I flashed the ROM (after wiping everything of course)... should I shutdown the phone and then start back into the recovery right away and then wipe everything and then flash the kernel or should I let the phone start up normally after the ROM wipe and then shutdown and reboot into recovery followed by wiping everything and then flashing the kernel?
Click to expand...
Click to collapse
It sounds to me that the problem is you're wiping "everything" before flashing the kernel. If you do a full data wipe, you're wiping the phone clean including the freshly flashed ROM. Try following this procedure: wipe everything, flash ROM, let it boot/reboot, wipe only cache and Dalvik-Cache, flash kernel, boot again, fix permissions, reboot. That's the standard procedure for flashing a custom kernel other than the kernel that comes with the ROM.
TeeJay3800 said:
It sounds to me that the problem is you're wiping "everything" before flashing the kernel. If you do a full data wipe, you're wiping the phone clean including the freshly flashed ROM. Try following this procedure: wipe everything, flash ROM, let it boot/reboot, wipe only cache and Dalvik-Cache, flash kernel, boot again, fix permissions, reboot. That's the standard procedure for flashing a custom kernel other than the kernel that comes with the ROM.
Click to expand...
Click to collapse
I actually haven't had a problem yet. Just wanted to make sure if what I did was the correct way to do things or not. Since there haven't been any problems and everything is working correctly so far, would you recommend that I reflash both the ROM and the kernel using the method you provided or should I just leave it be?
Thanks.
aybe said:
I actually haven't had a problem yet. Just wanted to make sure if what I did was the correct way to do things or not. Since there haven't been any problems and everything is working correctly so far, would you recommend that I reflash both the ROM and the kernel using the method you provided or should I just leave it be?
Click to expand...
Click to collapse
If you have the ROM and kernel you want loaded, and it's running smooth and stable, I would say leave it as is. Just refer to the steps I detailed the next time you flash a ROM followed by a third-party kernel.
I Flashed JellyTime ROM available here. I updated the Gapps too. The whole installation went smooth. Tab started with JT logo and then went blank. I waited for like 10 minutes and nothing happened. I tried twice but same result. So I went back to ICS4.0.3 stock.
Can some tell me if there is a newer JT ROM or am i doing someting wrong? I wiped cache and dalvik before flash.
PLEASE HELP:crying:
PuruTiger said:
I Flashed JellyTime ROM available here. I updated the Gapps too. The whole installation went smooth. Tab started with JT logo and then went blank. I waited for like 10 minutes and nothing happened. I tried twice but same result. So I went back to ICS4.0.3 stock.
Can some tell me if there is a newer JT ROM or am i doing someting wrong? I wiped cache and dalvik before flash.
PLEASE HELP:crying:
Click to expand...
Click to collapse
You have the V8 unlocked bootloader installed, correct? If not, you'll need to have it installed first.
If so, and a recent CWM installed,
sequence should be;
a. Wipe data/factory reset
b. Wipe Cache
c. Wipe Dalvik
d. Format /system
e. Install JT
Moscow Desire said:
You have the V8 unlocked bootloader installed, correct? If not, you'll need to have it installed first.
If so, and a recent CWM installed,
sequence should be;
a. Wipe data/factory reset
b. Wipe Cache
c. Wipe Dalvik
d. Format /system
e. Install JT
Click to expand...
Click to collapse
Great!! Thanks a lot!
Only step I had missed was format /system. I thought factory reset did just that, apparently I was wrong!
Thanks again. Loving my JB on A-501.
Just one issue, Google now voice search doesn't work.
And I noticed there is a phone app. So can I make a call??
Hello everyone. I like CREED V4 and tried installing final build but every time I end up with bootloops. Is this rom fail, or I am doing something wrong?
I followed this tutorial:
1. Flash stock DDLK2 rom as Xicor Yagami said in his thread
2. Boot into CWM recovery
3. Wipe data
4. Wipe cache
5. Wipe dalvik cache (just in case)
6. Wipe battery stats (just in case)
7. Flash CREED V4 rom
8. Reboot
If I am doing something wrong, tell me the right tutorial for installing
After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.
aniket.lamba said:
After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.
Click to expand...
Click to collapse
Still no luck. Have you tried this rom by yourself?
creed v4 installation
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition
anujb said:
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition
Click to expand...
Click to collapse
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot
marcussmith2626 said:
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot
Click to expand...
Click to collapse
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15
anujb said:
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15
Click to expand...
Click to collapse
See ril thread - Link in signature
marcussmith2626 said:
See ril thread - Link in signature
Click to expand...
Click to collapse
I didn,t get you...
anujb said:
I didn,t get you...
Click to expand...
Click to collapse
Click the link in my signature to open up a list of my threads - find the ril thread & read it
marcussmith2626 said:
Click the link in my signature to open up a list of my threads - find the ril thread & read it[/QUOTE
after flashing the ril file for DDMD1 its working
thanks for support
Click to expand...
Click to collapse
Hi All, I can flash a rom using RSD lite and then root using super one Click, then install 2nd init. I can access the custom recovery to install new roms. I do a factory reset/wipe cache, wipe dalvik and then install a rom. After install, I do a second wipe then reboot. Everything I try goes to a bootloop or does not work. When I am in a newer recovery, I wipe the /system folder too before installing a rom. and still no dice.
Any Ideas.
fleagalbaum said:
Hi All, I can flash a rom using RSD lite and then root using super one Click, then install 2nd init. I can access the custom recovery to install new roms. I do a factory reset/wipe cache, wipe dalvik and then install a rom. After install, I do a second wipe then reboot. Everything I try goes to a bootloop or does not work. When I am in a newer recovery, I wipe the /system folder too before installing a rom. and still no dice.
Any Ideas.
Click to expand...
Click to collapse
Use defy full wiper or aroma wiper to wipe everything and then flash. Then immediately reboot after flashing, no wipes required.
Sent from my Nexus 7 using Tapatalk
I tried the aroma wiper but still does not boot properly Thanks for the link though, I will try to use it more and see what if I can get something to stick.
fleagalbaum said:
I tried the aroma wiper but still does not boot properly Thanks for the link though, I will try to use it more and see what if I can get something to stick.
Click to expand...
Click to collapse
Don't wipe after installing the ROM.
Sent from my Nexus 7 using Tapatalk
I am using GT S5360. I have installed reincarnation pre final and it didn't passed the screen where samsung galaxy Y GTs5360 comes.
I followed the whole procedure but not working. Any help ???
Did you flash kernel?
Mount system?
Remember that naturalizer or touchwiz rom isn't for galaxy y
after you flash percys cm#2 kernel you must reboot to recovery and wipe system data and cache before you flash the rom
the steps are as follows
go into cwm
mount system
flash percys #2 kernel
reboot to recovery
format system data cache
mount system data cache
flash rom zip
format data
restart
if the rom still doesnt boot after that take out your sim card
if the rom now boots you need to change your baseband by flashing a different stock rom firmware via odin
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Honey_singh said:
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Click to expand...
Click to collapse
Do this :
1.Go to CWM,mount all the partitions and flash the kernel.
2.Reboot the system and take out the battery and then put it again
3.Again boot into cwm and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount all the partitions
6.Flash the rom and after that wipe data
7.Reboot
And burrrrrah!
Your new rom is ready!
Honey_singh said:
I flashed the jellybean version... I have restored the backup now and i followed all the steps... I flashed the zip file of kernel, rebooted recovery, formatted system, data, cache and then installed the rom... But it stucks on bootscreen... Dosen't even show the bootanimation...
Click to expand...
Click to collapse
go back into cwm and format data and restart
did you mount system data and cache before flashing the zip?
have you tried it without the sim card inserted?
aniket.lamba said:
Do this :
1.Go to CWM,mount all the partitions and flash the kernel.
2.Reboot the system and take out the battery and then put it again
3.Again boot into cwm and format system,data and cache
4.Go back and wipe data and cache
5.Again go to mounts and storage and mount all the partitions
6.Flash the rom and after that wipe data
7.Reboot
And burrrrrah!
Your new rom is ready!
Click to expand...
Click to collapse
Nthing happened
Still it stops at galaxy y gts5360 screen
marcussmith2626 said:
go back into cwm and format data and restart
did you mount system data and cache before flashing the zip?
have you tried it without the sim card inserted?
Click to expand...
Click to collapse
Yes, I mount the system and cache
Honey_singh said:
Nthing happened
Still it stops at galaxy y gts5360 screen
Yes, I mount the system and cache
Click to expand...
Click to collapse
have you removed the sim card and see if it booted - please do all the steps I mentioned