Database Users

[Q] HELP!! Problem when installing CM7 on Flipout

I have tried install CM7 on my flipout, I used tutorial writed by ShockBuddy:
install zip from sd-> install complete-> reboot-> and nothing change xD
my question is where is problem??

Gnoome said:
I have tried install CM7 on my flipout, I used tutorial writed by ShockBuddy:
install zip from sd-> install complete-> reboot-> and nothing change xD
my question is where is problem??
Click to expand...
Click to collapse
Did u wipe data / factory reset?

same problem,wiped but nothing changed..had latest firware avaiable installed 1.19.2,could be this?

sincellorybs
inaroom said:
same problem,wiped but nothing changed..had latest firware avaiable installed 1.19.2,could be this?
Click to expand...
Click to collapse
if you use Bootstrap
a.mounts and storage --> mount /system
b.wipe data/factory reset & wipe cache partition
c.install zip from sdcard -->choose zip from sdcard

As the one above me said
Reflash your Flipout with RSD Lite
In Recovery, wipe data/factory reset
Wipe Cache
Mounts and Storage --> mount /system
Flash the Rom, reboot and it should work ^^

Ok it's working I hope you will finish your work Great work!!!!! thx for help

same for me,didn't do the mount/system step.thanks!!

Im glad its working now, check out the Roms Thread for Bugs and Report Bugs there!

[Help] CWM & stock recovery showing errors

Hello xda. Not a newbie, but i am suffering from a strange problem.
My Cwm recovery seems to have been corrupted after trying to flash CM7.2 rom. I can't restore my nandroid backups, & can't flash any other rom. My stock recovery too shows following errors:
last log/dev/block
E: can't mount cache,
E: can't mount system & bla bla...
Anyone knows any fix for this?????????

the best is to flash a firmware complete new with odin.

Follow the instructions on cm7 thread
once you flash percys kernel you will get mount errors
just format system data & cache in cwm as you need an ext system partition

Anshulpnd said:
Hello xda. Not a newbie, but i am suffering from a strange problem.
My Cwm recovery seems to have been corrupted after trying to flash CM7.2 rom. I can't restore my nandroid backups, & can't flash any other rom. My stock recovery too shows following errors:
last log/dev/block
E: can't mount cache,
E: can't mount system & bla bla...
Anyone knows any fix for this?????????
Click to expand...
Click to collapse
Follow As i Say.........
Flash CM#2 Kernal..It Will Show A List Of errors(Don't Worry)
Reboot Recovery
Wipe Data,Cache,Dalvik
Reboot Recovery,Mount Everything And Install CM7.2.....
This will work only if you press thanks.......

D4rkSh4dow said:
Follow As i Say.........
Flash CM#2 Kernal..It Will Show A List Of errors(Don't Worry)
Reboot Recovery
Wipe Data,Cache,Dalvik
Reboot Recovery,Mount Everything And Install CM7.2.....
This will work only if you press thanks.......
Click to expand...
Click to collapse
no...can't wipe..
if you want to using cm7...you must format data...system..cache in recovery...then flash kernel and flash rom
else you go to download mode and flash stock rom with odin
goodluck

answer by new dev
Anshulpnd said:
Hello xda. Not a newbie, but i am suffering from a strange problem.
My Cwm recovery seems to have been corrupted after trying to flash CM7.2 rom. I can't restore my nandroid backups, & can't flash any other rom. My stock recovery too shows following errors:
last log/dev/block
E: can't mount cache,
E: can't mount system & bla bla...
Anyone knows any fix for this?????????
Click to expand...
Click to collapse
once you install the cm7 kernel you will get mount error because your file system is rfs
try to convert it with ext4 converter and that should by fix the mount error them flash the cm7 kernel and rom

CREED V4

Hello everyone. I like CREED V4 and tried installing final build but every time I end up with bootloops. Is this rom fail, or I am doing something wrong?
I followed this tutorial:
1. Flash stock DDLK2 rom as Xicor Yagami said in his thread
2. Boot into CWM recovery
3. Wipe data
4. Wipe cache
5. Wipe dalvik cache (just in case)
6. Wipe battery stats (just in case)
7. Flash CREED V4 rom
8. Reboot
If I am doing something wrong, tell me the right tutorial for installing

After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.

aniket.lamba said:
After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.
Click to expand...
Click to collapse
Still no luck. Have you tried this rom by yourself?

creed v4 installation
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition

anujb said:
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition
Click to expand...
Click to collapse
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot

marcussmith2626 said:
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot
Click to expand...
Click to collapse
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15

anujb said:
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15
Click to expand...
Click to collapse
See ril thread - Link in signature

marcussmith2626 said:
See ril thread - Link in signature
Click to expand...
Click to collapse
I didn,t get you...

anujb said:
I didn,t get you...
Click to expand...
Click to collapse
Click the link in my signature to open up a list of my threads - find the ril thread & read it

marcussmith2626 said:
Click the link in my signature to open up a list of my threads - find the ril thread & read it[/QUOTE
after flashing the ril file for DDMD1 its working
thanks for support
Click to expand...
Click to collapse

partition CM 11 by Belfish

If i have aurora SP+ update 2 and i want to install CM11 I need to change partition?

??

oz0021 said:
If i have aurora SP+ update 2 and i want to install CM11 I need to change partition?
Click to expand...
Click to collapse
which partition u use currently???

insignia666 said:
which partition u use currently???
Click to expand...
Click to collapse
i don't know
how I can check it?

oz0021 said:
i don't know
how I can check it?
Click to expand...
Click to collapse
you can check it by going in settings->storage and check the size....

insignia666 said:
you can check it by going in settings->storage and check the size....
Click to expand...
Click to collapse
i have only the aviailble space in there
if this helps..

oz0021 said:
i have only the aviailble space in there
if this helps..
Click to expand...
Click to collapse
ok do one thing install the new recovery 6.0.4.6 and wipe everything and flash any of these partition http://forum.xda-developers.com/showthread.php?t=2615712 then install kitkat.....
kitkat needs 450mb space... so i guess u need to change ur partition scheme....

insignia666 said:
ok do one thing install the new recovery 6.0.4.6 and wipe everything and flash any of these partition http://forum.xda-developers.com/showthread.php?t=2615712 then install kitkat.....
kitkat needs 450mb space... so i guess u need to change ur partition scheme....
Click to expand...
Click to collapse
i don't understand the insralion guide of bliepart man
thanks for helping

oz0021 said:
i don't understand the insralion guide of bliepart man
thanks for helping
Click to expand...
Click to collapse
its simple just flash the partition zip from cwm recovery

insignia666 said:
its simple just flash the partition zip from cwm recovery
Click to expand...
Click to collapse
Hey man, my english is not good thats the reason why i had a problem.
can you explain to me the steps in your way to install the partition and the rom.
I sure it will work
thanks

oz0021 said:
Hey man, my english is not good thats the reason why i had a problem.
can you explain to me the steps in your way to install the partition and the rom.
I sure it will work
thanks
Click to expand...
Click to collapse
Ok here's the step by step guide:
1. Download this recovery, partition and rom place it in your root of your external sdcard.
2. Go to recovery then choose the recovery zip from your sdcard and flash it.
3. In the recovery itself go to advanced->reboot recovery.
4. When the recovery is rebooted make a factory reset, wipe partition cache, wipe dalvik cache.
In the recovery go to mounts and storage and wipe system, data and cache.
NOTE: While installing from sdcard in new recovery it will show you like /sdcard0=(external memory card) and /sdcard1=(internal storage).
5. Flash the partition from your sdcard. (Most probably the sdcard0.)
6. Reboot recovery.
7. Flash the ROM.
Happy Flashing......:laugh::laugh::laugh::laugh::laugh:

insignia666 said:
Ok here's the step by step guide:
1. Download this recovery, partition and rom place it in your root of your external sdcard.
2. Go to recovery then choose the recovery zip from your sdcard and flash it.
3. In the recovery itself go to advanced->reboot recovery.
4. When the recovery is rebooted make a factory reset, wipe partition cache, wipe dalvik cache.
In the recovery go to mounts and storage and wipe system, data and cache.
NOTE: While installing from sdcard in new recovery it will show you like /sdcard0=(external memory card) and /sdcard1=(internal storage).
5. Flash the partition from your sdcard. (Most probably the sdcard0.)
6. Reboot recovery.
7. Flash the ROM.
Happy Flashing......:laugh::laugh::laugh::laugh::laugh:
Click to expand...
Click to collapse
thanks you man you are the best :good:

Internal storage 0mb twrp

Im using a levovo a6000 android phone after rooting my phone i tried to install a custom rom
then when i checked my internal memory it was showing a 0mb of internal memory
the errors are as follows
1. E : unable to mount /data/media/TWRP/ .twrps when trying to read setting file.
2. E: Unable to mount '/data'
3. E: unable to mount '/storage'
Even on wiping dalvik cache and cache
i have rooted my phone using amd command prompt help me ee

nikhil7870 said:
Im using a levovo a6000 android phone after latest offical android update given by lenovo came my phone booted ok
then when i checked my internal memory it was showing a 0mb of internal memory
the errors are as follows
1. E : unable to mount /data/media/TWRP/ .twrps when trying to read setting file.
2. E: Unable to mount '/data'
3. E: unable to mount '/storage'
Even on wiping dalvik cache and cache
i have rooted my phone using amd command prompt help me ee
Click to expand...
Click to collapse
How did you managed to install the ota update on rooted device....!??

oops sorry its my friend mistake
sasukay said:
How did you managed to install the ota update on rooted device....!??
Click to expand...
Click to collapse
i had flashed a custom rom through TWRP please help me to figure it out

nikhil7870 said:
i had flashed a custom rom through TWRP please help me to figure it out
Click to expand...
Click to collapse
Boot into twrp and wipe cache, dalvik, data and system. Then flash the custom rom

sasukay said:
Boot into twrp and wipe cache, dalvik, data and system. Then flash the custom rom
Click to expand...
Click to collapse
while wiping data, cache , dalvik cache ,system, cache , data
its give a error wipe complete failed
and another error is
E: UNABLE TO MOUNT '/DATA'
E: UNABLE TO MOUNT STORAGE

Can xda developer fix my problem i think that xda is best and i always follow them but now i cannot get any help from you please help me

nikhil7870 said:
Can xda developer fix my problem i think that xda is best and i always follow them but now i cannot get any help from you please help me
Click to expand...
Click to collapse
Flash cwm any try wiping and then flash new rom from
http://forum.xda-developers.com/showpost.php?p=66472910&postcount=4

sasukay said:
Flash cwm any try wiping and then flash new rom from
http://forum.xda-developers.com/showpost.php?p=66472910&postcount=4
Click to expand...
Click to collapse
I think ur system partions is corupted

amithchinu said:
I think ur system partions is corupted
Click to expand...
Click to collapse
if it is corrupted then how to fix it and can u tell me how to do repartition

Go here http://forum.xda-developers.com/showthread.php?t=2683787 u will get solution
---------- Post added at 02:55 AM ---------- Previous post was at 02:54 AM ----------
If it does not work goto service center

amithchinu said:
Go here http://forum.xda-developers.com/showthread.php?t=2683787 u will get solution
If it does not work goto service center
Click to expand...
Click to collapse
You might not know this, but every device has its own different system partitions. The thread you were referring to is for Asus Transformer Pad. Following that might make the problem worse.

But this is ASus phone it works on lenovo a6000

sasukay said:
You might not know this, but every device has its own different system partitions. The thread you were referring to is for Asus Transformer Pad. Following that might make the problem worse.
Click to expand...
Click to collapse
No bro it has sameproblem unable to mount data and cache there is solution to solve

amithchinu said:
No bro it has sameproblem unable to mount data and cache there is solution to solve
Click to expand...
Click to collapse
In that tutorial mmcblk0p8 is being formatted because that memory location has the /data directory on Asus Transformer. But, in our device the /data can be in any other partition, and doing that might brick the device permanently

Delete the recovery log from twrp folder and flash another twrp from flashtool or rash..what version are you using? If it is indeed a corrupted partition, you can reflash your phone using qfill

Try using the Fix Permissions in TWRP recovery...
It may help.
:fingers-crossed:

@nikhil7870 do you solve this problems?

nikhil7870 said:
Im using a levovo a6000 android phone after rooting my phone i tried to install a custom rom
then when i checked my internal memory it was showing a 0mb of internal memory
the errors are as follows
1. E : unable to mount /data/media/TWRP/ .twrps when trying to read setting file.
2. E: Unable to mount '/data'
3. E: unable to mount '/storage'
Even on wiping dalvik cache and cache
i have rooted my phone using amd command prompt help me ee
Click to expand...
Click to collapse
Best way is install the latest twrp I.e 3.0.2 and do the format everything instead of advanced wipe. Your problem will be solved. I too faced the same problem and I did what I have advised you. It worked.

cyberwarrior_a said:
Best way is install the latest twrp I.e 3.0.2 and do the format everything instead of advanced wipe. Your problem will be solved. I too faced the same problem and I did what I have advised you. It worked.
Click to expand...
Click to collapse
Is the problem resolved??

I have solution
Bro don't take so much tension , thats not hardware problem its only your Recovery's reading cache error . you can simply fix this by flashing old version of recovery and from that old recovery again wipe what you want to remove but man don't touch your mount section column , after wiping data and anything else simply flash new twrp.img then simply reboot recovery . wollllaaa you got your partion cache back now again you can simply flash you favorite roms. I hope you understand what you have to do now . But please follow these steps carefully :good: .
Remember don't flash KitKat recovery over lolipop recovery otherwise you got bootloop. Old recovery means suppose if you have now twrp v 3.1 just simply flash v2.8 then after wiping things you want , then simply flash twrp v 3.1 .
If you still have any doubt you can contact me via WhatsApp - +91 9205097520 (indian no. ) or simply reply me on xda or simply mail me at - [email protected] . And at last don't forget to tell me about your device problem .