i was at MJ3 rooted with de la vega
knox was 0x0 and system official using wanam xposed
and did OTA with super su pro survivel mode
knox was 0x0 but system changed to custom . wanam xposed didn't worked for me at MJ3
now even i did full unroot with super su
system stay on custom
there is any way to get official again ? even by downgrage , without tripping the knox ?
thanks...
just download a stock ROM, and flash it with Odin
it's as simple as that.
benhouli said:
i was at MJ3 rooted with de la vega
knox was 0x0 and system official using wanam xposed
and did OTA with super su pro survivel mode
knox was 0x0 but system changed to custom . wanam xposed didn't worked for me at MJ3
now even i did full unroot with super su
system stay on custom
there is any way to get official again ? even by downgrage , without tripping the knox ?
thanks...
Click to expand...
Click to collapse
yeah grab firmware from www.sammobile.com
on kies it say i have MJ3 (XEH)
even my phone is from handtec
which stock i need to download
MJ1 or MJ3
and which country ?
by the way
my phone had the sticker of the region lock on the box
but it was unlock at the first time i opened it , and no one opened it before to unlock it
my main concern is to stay knox 0x0 as i am right now and get back to official instead custom
benhouli said:
on kies it say i have MJ3 (XEH)
even my phone is from handtec
which stock i need to download
MJ1 or MJ3
and which country ?
by the way
my phone had the sticker of the region lock on the box
but it was unlock at the first time i opened it , and no one opened it before to unlock it
my main concern is to stay knox 0x0 as i am right now and get back to official instead custom
Click to expand...
Click to collapse
tricky i would go for mj3 and what country you from
jaythenut said:
tricky i would go for mj3 and what country you from
Click to expand...
Click to collapse
it will be more tricky
beacuse in my country the n9005 sell just by grey market and not official
just the n900 sell official
benhouli said:
it will be more tricky
beacuse in my country the n9005 sell just by grey market and not official
just the n900 sell official
Click to expand...
Click to collapse
So what country
jaythenut said:
So what country
Click to expand...
Click to collapse
israel
the only rom here for the note 3 is for the n900
benhouli said:
israel
the only rom here for the note 3 is for the n900
Click to expand...
Click to collapse
sorry dont know you could try factory reset might work
jaythenut said:
sorry dont know you could try factory reset might work
Click to expand...
Click to collapse
maybe i will try it , just hope that will not trip the knox
thanks
benhouli said:
maybe i will try it , just hope that will not trip the knox
thanks
Click to expand...
Click to collapse
It should not trip knox
jaythenut said:
It should not trip knox
Click to expand...
Click to collapse
just update
after factory reset knox still 0x0
and system status still custom
any suggestion?
one more update
i flashed stock rom with odin (MJ3)
after that knox still on 0x0
but system still custom
don't know what to do next
any help please ?
UPDATE
after a third restart
system back to official
Using ODIN even with official firmware still sets my N3 to 'custom' status and OTA fails.
Kies Beta 3 - Emergency Firmware Recovery fixed it for me. I am now stock MJ6 (BTU)
hi guys I just want to ask a noob question..
I'm rooted by cf and knox trigger 0x1 if I flash official firmware like MJ3 will my knox return back to 0x0 and become official ..
Thanks!
Currently there is no way to revert Knox trigger back to 0x0.
Related
hi
my note 3 has a t-mobile branding ...
What happens if I flash a stock Rom? for example an open Germany.
Just asking because of Knox Counter :/
XtremeAt said:
hi
my note 3 has a t-mobile branding ...
What happens if I flash a stock Rom? for example an open Germany.
Just asking because of Knox Counter :/
Click to expand...
Click to collapse
Id like to know this, I get good deal from network, but have always debranded handset before flashing BTU firmware.
Curious about the knox counter also in this situtation.
I'm not sure either but i think official firmwares should be safe to flash.
It's modded or unsigned kernels/bootloaders that will cause the KNOX flag to trigger.
On the S4 flashing stock fw triggers off the knox counter...
http://forum.xda-developers.com/showpost.php?p=45669402&postcount=4
But he repacked the FW with an older Kernel. Maybe that was the Problem.
I hope someone would test this
Knox will increase when flashing.
Sent from my SM-N9005 using xda app-developers app
Does someone even use Knox? I prefere root over Knox!
I have a question about Knox...
I don't care if I trip the Knox counter to 0x1 because when I root I know I void my warranty.
My question is once rooted and the Knox counter is at 0x1 is there a way to get the phone in a state where it will receive OTA updates.
danieljamie said:
Knox will increase when flashing.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
It doesn't increase, it is 0x0 or 0x1, on or off
Hi Guys .
i am planning to buy a Galaxy Note 3 SM-N9005 Snapdragon S800 Version but i have some questions .
First i dont care about warranty so i dont have any problem with KNOX Void Warranty 0×1.
i read that "It isn’t possible to downgrade to KNOX-disabled firmwares/bootloaders (An attempt sets 0×1) (even though some people state, downgrade is possible when omitting the bootloader file in a firmware package). By downgrading from KNOX-enabled to KNOX-disabled firmware, your devices will be locked to installation of newer firmwares."
and ". If you try to downgrade to KNOX-disabled system(MGA for example) your device will be flaged as KNOX Void Warranty 0×1 and will get a special lock – you won’t be able to update to any KNOX-enabled firmware even by ODIN. Samsung’s 4.3 update is KNOX-enabled, so if you tried to downgrade to KNOX-disabled firmware(for example MH8->MGA), you won’t be able to install 4.3 update."
so this mean if the The KNOX flag being tripped i wont be able to flash (install) any stock roms (newer builds) .
You can always upgarde no matter what knox warranty says
EDIT: all note 3 firmwares are knox enabled...
I think you took your qutes from a sgs4 forum, where android4.2 is NOT and andoid 4.3 is knox enabled
Leave a 'Thanks' if i helped you
SM-N9005 MJ7 Knox 0x0
XDA Premium 4 mobile app
Killberty said:
You can always upgarde no matter what knox warranty says
EDIT: all note 3 firmwares are knox enabled...
I think you took your qutes from a sgs4 forum, where android4.2 is NOT and andoid 4.3 is knox enabled
Leave a 'Thanks' if i helped you
SM-N9005 MJ7 Knox 0x0
XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://omegadroid.co/wanted-knox-void-warranty-0x1/
Rawand Kurdy said:
http://omegadroid.co/wanted-knox-void-warranty-0x1/
Click to expand...
Click to collapse
As i said...
Samsung Galaxy Note 3 (already has KNOX Security System)
Click to expand...
Click to collapse
You can update no matter what
Leave a 'Thanks' if i helped you
SM-N9005 MJ7 Knox 0x0
XDA Premium 4 mobile app
any body know if can i downgrade mt n900w8 to 4.3 from 4.4 telcel.. i cant find full firmware mj7 with pit file bl. everything.. another thing...today i open my phone just for curious and i see at&t words in the microphone and behind in the black cover says n900A but i try to flash full firmware of att and no work says pit file dont matches.. why is that?
Gentlemen official anouncemnti downgrade my phone from 4.4.2 to 4.3 mj4.. its possible. first time not boot.. but i flash again and it works..try it.
leo_hacker82 said:
any body know if can i downgrade mt n900w8 to 4.3 from 4.4 telcel.. i cant find full firmware mj7 with pit file bl. everything.. another thing...today i open my phone just for curious and i see at&t words in the microphone and behind in the black cover says n900A but i try to flash full firmware of att and no work says pit file dont matches.. why is that?
Gentlemen official anouncemnti downgrade my phone from 4.4.2 to 4.3 mj4.. its possible. first time not boot.. but i flash again and it works..try it.
Click to expand...
Click to collapse
You can so long as it's the w8
Ok. But why my phone have att words inside and the black hard rubber say n900A...in the back of rhe phone..its possible
leo_hacker82 said:
Ok. But why my phone have att words inside and the black hard rubber say n900A...in the back of rhe phone..its possible
Click to expand...
Click to collapse
No Idea, won't hurt you to try downgrade though. At most you'll get a bootloop and reflashing KK will fix it.
Right now im running 4.3 mj4 and works fine. No bootloops ...after downgrade works fine..now i need to find the way of recover my efs file..nvram.nv bak..all those files are missing..no backup.ideas?
I have samsung s4 mini sgh-i257m disguised as gt-i9195 and my Knox is 0x1 sadly, im on 4.2.2 with knox and i am wondering if i can upgrade to 4.4.2 and go back to the same 4.2.2. Basically go back and forth (knox enabled to knox enabled) i want to try 4.4.2 but i want to make sure i can still go back
I was one of the impatient ones and flashed the stock Polish 4.4.2 onto my N9005 and rooted with CWM. Everything has been fine but now I wish to flash my regions stock rom BTU unbranded. However every time I do so via Odin 3.09 I am presented with the Polish welcome screen and when you look in the settings it's still the XEO firmware. Even the System Status and Current Binary shows up as Custom still?
It's known problem, u need to flash first single csc firmware e.g Singapore & than BTU multi csc.
Sent from my SM-N9005 using xda app-developers app
jdomadia said:
It's known problem, u need to flash first single csc firmware e.g Singapore & than BTU multi csc.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Thats great thanks. This was the missing link I needed :good: I shall also assume that the Custom/Modified status will always remain due to KNOX being tripped to 0x1
u8er-n3rd said:
Thats great thanks. This was the missing link I needed :good: I shall also assume that the Custom/Modified status will always remain due to KNOX being tripped to 0x1
Click to expand...
Click to collapse
U can make it official(FAKE) to receive OTA but knox counter will remain 0x1
P.S. After&Before flash rom from singapore than UK u need to clear data & catch which flashes your Internal meomery.
jdomadia said:
U can make it official(FAKE) to receive OTA but knox counter will remain 0x1
Click to expand...
Click to collapse
Im aware of the Xposed method but that has to be rooted. If there is no other way I shall just go back to being rooted I guess
Hi
I bought one S5 rooted to other guy... but i have 2 problems... He says the phone was only rooted but i saw this line:
Knox 0x1 (4) (what is this last number? :S)
And second... if i flash with odin a stock ROM, status will be OFFICIAL? because with wipes and unroot is CUSTOM yet...
Thanks and sorry for my english...
ManuH8 said:
Hi
I bought one S5 rooted to other guy... but i have 2 problems... He says the phone was only rooted but i saw this line:
Knox 0x1 (4) (what is this last number? :S)
And second... if i flash with odin a stock ROM, status will be OFFICIAL? because with wipes and unroot is CUSTOM yet...
Thanks and sorry for my english...
Click to expand...
Click to collapse
It's just a binary number. When you root your phone
1. Your device status will be CUSTOM
2. Your Knox code is tripped
Bad news is there's no turning back here. You will void your warranty and all Knox security feature. Currently, it's impossible to reset those flags
Good news is no one care about those craps, welcome to Knox Tripped Club and enjoy your freedom
Thanks!
But i wanna know if i can turn back to OFFICIAL and if (4) erase or always stay with Knox 0x1 (this don't care but these (4) i never saw :S)
EDIT: (4) can be number flashed device?
ManuH8 said:
Thanks!
But i wanna know if i can turn back to OFFICIAL and if (4) erase or always stay with Knox 0x1 (this don't care but these (4) i never saw :S)
EDIT: (4) can be number flashed device?
Click to expand...
Click to collapse
As I said.
It will always stick with CUSTOM, you can't turn back to OFFICIAL
KNOX warranty will always show 0x1 (4), no matter how many times you flash
babygau said:
As I said.
It will always stick with CUSTOM, you can't turn back to OFFICIAL
KNOX warranty will always show 0x1 (4), no matter how many times you flash
Click to expand...
Click to collapse
I turn back to OFFICIAL flashing STOCK ROM with ODIN (unrooted and factory reset)
Knox always show 0x1 (4) ??? Only on S5 or 4.4? Because with note 3 or S4 only show knox 0x1 without other number... I'm lost xd
Thanks for your help!
ManuH8 said:
I turn back to OFFICIAL flashing STOCK ROM with ODIN (unrooted and factory reset)
Knox always show 0x1 (4) ??? Only on S5 or 4.4? Because with note 3 or S4 only show knox 0x1 without other number... I'm lost xd
Thanks for your help!
Click to expand...
Click to collapse
Don't worry about that bro, it's already there since the very first time your phone rooted. One way or another, that number (4) will not increase or decrease
ManuH8 said:
I turn back to OFFICIAL flashing STOCK ROM with ODIN (unrooted and factory reset)
Knox always show 0x1 (4) ??? Only on S5 or 4.4? Because with note 3 or S4 only show knox 0x1 without other number... I'm lost xd
Thanks for your help!
Click to expand...
Click to collapse
Yes if you install an official rom the status'll be changed to official and now you can use Private Mode without any problem, and use the OTA updates.
Regarding the 0x1(4), yes it will always show that number no matter what you do.
I've 3 S5 rooted and all of them show different numbers after the 0x1...
babygau said:
As I said.
It will always stick with CUSTOM, you can't turn back to OFFICIAL
KNOX warranty will always show 0x1 (4), no matter how many times you flash
Click to expand...
Click to collapse
I have a S5 Duos, I root too, and stayed that way!
For the status of the Roma back as original, use the Triangle Away app (by your own risk).
Have Knox counter, will be even as it is, does not like change.
My Knox shows 0x1 (0) with Samsung Oficial Status
I want to know Can I restore official firmware with odin?
Oakar Bo said:
I want to know Can I restore official firmware with odin?
Click to expand...
Click to collapse
Yes, you should be able to Odin to stock firmware
Can OTA update be installed?
Hi All,
Is there a way to reflash stock firmware without tripping knoxx?
I'm using offical H3G MJ3 firmware without root and I've started getting random reboots. I've tried a factory reset several times and have also gone through my apps to see if any of them are causing it.
I've read conflicting reports saying If I flash official firmware (even if the same) in odin it will trip Knox. Will flashing through kies trip knox aswell?
I'd rather keep Knox 0x0 as I believe it will break MHL if i void it
Thanks
What device do you own?
It's an I9505.
Cheers
symondo12 said:
It's an I9505.
Cheers
Click to expand...
Click to collapse
The latest firmware for your phone is this ONE. Installing one stock firmware don't touch KNOX state if you flash it correctly.
Joku1981 said:
The latest firmware for your phone is this ONE. Installing one stock firmware don't touch KNOX state if you flash it correctly.
Click to expand...
Click to collapse
Thanks for your reply and providing the link but I already have the firmware. I just need clarification that if I flash the firmware via Odin or kies will it trip knox
Thanks