Related
Hello,
I have installed Magldr 1.3 + NANRDOID MDJ 2.6 ..
I am unable to go to the boot from ad sd option ... As in if i have to update any .zip file .. and I choose the option for ad sd boot .. it will get stuck in GO GO GO screen ..
Please help me ..
I have used task 29 and installed everything again ..
NOTE : I have installed a new sd card and updated the recover_250 file also.
Thanks ...
Have you installed a CWM 1.3 partition? You need to flash a partition from here to provide you with CWM Recovery. I know you say you have a recover_250 file, but is it the latest version?
To go to CWM you need to select the AD Recovery option not Boot AD SD.
ClydeB1 said:
Have you installed a CWM 1.3 partition? You need to flash a partition from here to provide you with CWM Recovery. I know you say you have a recover_250 file, but is it the latest version?
To go to CWM you need to select the AD Recovery option not Boot AD SD.
Click to expand...
Click to collapse
Thank you for the reply.
Yes i have installed the latest version1.3 only and I am talking about going into the option for BOOT AD SD .... I want to install another ROM ...
and when i click the BOOT AD SD option .. it will get stuck in the GO GO GO screen ...
I hope i am able to explain my situation ...
When i go to BOOT AD SD option in MAGLDR V1.13 .. it says ..
SD KERNEL OPEN FAILED
Its working now
Thank you
ajsam4u said:
Its working now
Thank you
Click to expand...
Click to collapse
how did you solve this problem because am having the same problems, pls help me out.
mikeysho said:
how did you solve this problem because am having the same problems, pls help me out.
Click to expand...
Click to collapse
If you are using magldr 1.13 with cwm 1.3 partitions you no longer go to Boot AD SD. To enter CWM you need to go to AD Recovery on magldr menu.
I had the same problem.
but now i have another problem which recovery should i take? 150 250 400???
greetz
nummrt47 said:
I had the same problem.
but now i have another problem which recovery should i take? 150 250 400???
greetz
Click to expand...
Click to collapse
This depends on what ROM you want to install using CWM. A large ROM like a Desire HD build requires more then a light ROM with only the essentials baked in. If you really aren't sure what to flash just check the guide accompanied with the ROM.
does this mean that I have to install CWM every time i want to install another ROM??
nummrt47 said:
does this mean that I have to install CWM every time i want to install another ROM??
Click to expand...
Click to collapse
Technically, no. Not unless the partition layouts for the different ROM's you are trying are different and in turn they require you to run DAF (which re-partitions your NAND storage).
If they are the same then your partition layout won't be changed and your recovery partition, which is where CWM resides, won't be affected at all when switching ROM's.
but i could also install the biggest one(400) and everything would work because I can't have a too small partition???
could that work??
Hi for all,
now I'm using a WP7 ROM called HD2O© v1.14. I have already installed a Hard SPL 2.08, Radio 2.15 and Magldr 1.13.
And I want to flash this prety looking ROM from imilka developer ...
Code:
http://forum.xda-developers.com/showthread.php?t=919148
Can I do that? Do I need something else? Or just boot to Maglfr, flash CWM and then ,,install zip from sd card,,. Please help me with this. Thanks a lot!
Yes.
Download this
Then read the instructions in your roms thread and then partition your sd card accordingly then flash rom.
THaltof said:
Hi for all,
now I'm using a WP7 ROM called HD2O© v1.14. I have already installed a Hard SPL 2.08, Radio 2.15 and Magldr 1.13.
And I want to flash this prety looking ROM from imilka developer ...
Code:
http://forum.xda-developers.com/showthread.php?t=919148
Can I do that? Do I need something else? Or just boot to Maglfr, flash CWM and then ,,install zip from sd card,,. Please help me with this. Thanks a lot!
Click to expand...
Click to collapse
Hi,
Firstly what LEO do you have(512 or 1024)
Backup your data before starting.
Get THIS TOOL
Set to Magldr repartition>Your size according to [OP]135M (or 150M) system partition layout for EU
350M system partition layout for TMOUS
Then repartition.
Go to ad recovery>wipe data,cache partition,dalvik(advanced).
Go to install zip from sd card,choose imilka's
reboot
enjoy
EDIT:
LOL SNAP
You got me. Both I don't know which version of HD2 I have How can I check it and what is the diference between 512 and 1024?
I'm from czech republic and I'm so sorry but I don't understand you. Both I need a video tutorial This could be a hope for me
EDIT: This ROM what I want is NAND so I don't need a cLK Partitioning right? And I have I think EU version so I don't need nothing. Just go to 5. USB Flasher in Magldr and flash CWM. Then just go to AD Recovery and flash MY ROM. Is this right or not?
UP
THaltof said:
You got me. Both I don't know which version of HD2 I have How can I check it and what is the diference between 512 and 1024?
I'm from czech republic and I'm so sorry but I don't understand you. Both I need a video tutorial This could be a hope for me
EDIT: This ROM what I want is NAND so I don't need a cLK Partitioning right? And I have I think EU version so I don't need nothing. Just go to 5. USB Flasher in Magldr and flash CWM. Then just go to AD Recovery and flash MY ROM. Is this right or not?
Click to expand...
Click to collapse
Hi,
try this
Thank you
THaltof said:
Thank you
Click to expand...
Click to collapse
Sorry,but I am not sure what you want...
I have a problem Please could anyonehelp me? I flashed CWM 1,3 with 150MB repartition and ther through CWM I flashed this ROM.
http://forum.xda-developers.com/showthread.php?t=919148
Everything goes well. But now when all is done, my phone don't want to boot up. Only HTC boot logo is showing Could you tell me why? What's wrong?
Anyone won't to helpme?
THaltof said:
Anyone won't to helpme?
Click to expand...
Click to collapse
Did you :
Go to ad recovery>wipe data,cache partition,dalvik(advanced) before you flashed rom?
Also maybe try cwm 135M.
Yes I did it. And I also tried CWM 400MB but the same issue. I don't understand this. I used this tutorial in my language
http://wmmania.cz/clanky/navody/jak-nahrat-android-do-htc-hd2/
THaltof said:
Yes I did it. And I also tried CWM 400MB but the same issue. I don't understand this. I used this tutorial in my language
http://wmmania.cz/clanky/navody/jak-nahrat-android-do-htc-hd2/
Click to expand...
Click to collapse
Ok,
Backup your sd card onto your pc.
You need to re-format your sd card using XP or G-Parted Live(google).
Go to recovery >advanced>partition sd card ...you want 1024M + 0 swap
Then try everything again.
Ok i will try this. And which CWM can I flash. 150MB or 400MB. I think that 150MB is enought.
THaltof said:
Ok i will try this. And which CWM can I flash. 150MB or 400MB. I think that 150MB is enought.
Click to expand...
Click to collapse
Start with 135M as stated in [OP]
I couldn't find this version I applied 150MB and now I'm in CWM and doing Partitioning SD Card... Now it's complete. Now I must add my ROM to sd card because I formated it. And then I will apply this ROM. We will see
....INSTALLING....
THaltof said:
I couldn't find this version I applied 150MB and now I'm in CWM and doing Partitioning SD Card... Now it's complete. Now I must add my ROM to sd card because I formated it. And then I will apply this ROM. We will see
Click to expand...
Click to collapse
Here you go.
Next problem. Now I see on screen only:
Unpacking SD-EXT files....
Now it takes about 3min. It isn't normal It's slashed
EDIT// Change Now flashing continues. Now It's done. REBOOT
EDIT 2//Next change. Now HTC quuetly briliant animation show's up. Still booting
It's working. But for first boot it's a too slow. It's normal?
THaltof said:
Next problem. Now I see on screen only:
Unpacking SD-EXT files....
Now it takes about 3min. It isn't normal It's slashed
EDIT// Change Now flashing continues. Now It's done. REBOOT
EDIT 2//Next change. Now HTC quuetly briliant animation show's up. Still booting
Click to expand...
Click to collapse
It can take 10-20 minutes
Hey guys long story short, i have tried to install android on my htc hd2 after not likind windows mobile at all.
Ok installed hardSPL 2.08...ok
task 29.... ok
radio 2.15.50.14 ....ok
mgldr 1.13....ok
run DAF.exe and rom installs fine, mgldr loads and goes to boot but says denied.
so i retried everything and this time tried the CMR way and istalled clockwork, again fine, then downloaded compatible rom for it and installed of sc card and flashed fine, now when it loads the android fella comes on but hangs,
so i then tried the CLK way, again everything installs fine but the rom still hangs,
any suggestions?
forgot to mention i used the 400mb partition size
laytonanthony said:
forgot to mention i used the 400mb partition size
Click to expand...
Click to collapse
Hi,
So what have you got on your phone now?cLK or ,magldr?
And which ROM are you trying to install?
LOL nothing atm just task29 to delete it off, and the rom i would like is [CWR-CLEAN] BOYPPC-SHIFTPDA_GINGER 2.3.4-HoneyComB V29 (12.Jun)
just cant seem to get it to work
ok updating back to factory rom now of HTC website, any pointers after as im gunna go for it again lol! Hate windows 6.5 and 7..
laytonanthony said:
ok updating back to factory rom now of HTC website, any pointers after as im gunna go for it again lol! Hate windows 6.5 and 7..
Click to expand...
Click to collapse
Hi,
Seems like you were doing everything correctly.
According to [OP]:
2.Flash Recovery
- Goto MAGLDR113 menu
- Choose USB Flasher (use Volume down/Volume up button, then press Call button)
- Connect your phone to PC
- Run DAF.exe and follow guide step by step
- Phone auto reboot and go to MAGLDR113 menu
3.Flash rom by recovery.
- copy rom boyppc-shiftpdaxxx.zip to sd card
- goto magdl menu
- ad recovery
- install zip from sdcard
- choose zip from sdcard
- boyppc-shiftpda xxx.zip
- yes.....waiting android boot.....
Make sure you use a card reader to transfer rom to sd card.Less chance of corrupting files.
P.S. ROM can take 15-20 minutes to boot
ok so that rom i posted above will work on mgldr but also will support clockwork!
laytonanthony said:
ok so that rom i posted above will work on mgldr but also will support clockwork!
Click to expand...
Click to collapse
HI,
Magldr is the bootloader(required)
Clockworkmod will flash the necessary partition for the system to run.
ok just tries the DAF.exe way throught MGLDR option 5 usb, installed, went to boot and went to boot and got "NAND kernal open failed"
hmmmm
laytonanthony said:
ok just tries the DAF.exe way throught MGLDR option 5 usb, installed, went to boot and went to boot and got "NAND kernal open failed"
hmmmm
Click to expand...
Click to collapse
Have you partitioned your sd card?
partition sd card? .....
laytonanthony said:
partition sd card? .....
Click to expand...
Click to collapse
OK,
Before flashing clockworkmod,go to magldr>ad recovery>advanced>Partition SD Card.1024m with 0 cache
ok partitioned, what next pal!
laytonanthony said:
ok partitioned, what next pal!
Click to expand...
Click to collapse
2.Flash Recovery
- Goto MAGLDR113 menu
- Choose USB Flasher (use Volume down/Volume up button, then press Call button)
- Connect your phone to PC
- Run DAF.exe and follow guide step by step
- Phone auto reboot and go to MAGLDR113 menu
3.Flash rom by recovery.
- copy rom boyppc-shiftpdaxxx.zip to sd card
- goto magdl menu
- ad recovery
- install zip from sdcard
- choose zip from sdcard
- boyppc-shiftpda xxx.zip
- yes.....waiting android boot.....
Make sure you use a card reader to transfer rom to sd card.Less chance of corrupting files.P.S. ROM can take 15-20 minutes to boot
ok pal i tried partitioning sd-card and was sucessful, then i tried the DAF.exe install and again failed so then i transferd the zip file over to the SD card and installed of card, and what do you no it,,,,, hey presto it worked, took some time to book but it booted lol.
thanks a bunch, send me a donation paypal link or even just ur paypal address and ill send you a drink over
again thank you fella!
+1 thanks was lookin for this answer all day thanks
hi guys i have used the Recommands partition for the roms 1GB ext4 partition on my sdcard and tried 2GB, flashed WIPE IT and wiped dalvik also tried task29 and started from scratch, any help would be much appreciated really want to try sense 3.5
thanks
Hi, a possible cause of problem - check your zip file (ROM), copy it to PC and try to unpack, may be it's broken. Sometimes you don't have error message when flashing, but when check on PC it shows errors.
thanks mate i will give that a try
i just extract the 2 roms i have been trying to get to work they seems ok
have you got the correct partition size for the rom ?
Which Sense ROM are you using, anyways?
Try a ext 3 partition on your sdcard then run clean install
thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again
cozman85 said:
thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again
Click to expand...
Click to collapse
Have a look at this it enables you to see your partition and convert or revert, might be of some interest to you..... Good Luck.
http://forum.xda-developers.com/showthread.php?t=1154221
can that be flashed on the hd2
cozman85 said:
can that be flashed on the hd2
Click to expand...
Click to collapse
yep... just install via cmw and it will reboot go into ad recovery and you'll see some new options.
Note:Once you reboot it will be gone, if you want it back repeat install.
Nice and handy - Check it out..
Edit: I'm using 4EXTRecovery v2.1.3 RC2 - No problems.
i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext
same problem
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(
Nickman_83 said:
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(
Click to expand...
Click to collapse
cozman85 said:
i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext
Click to expand...
Click to collapse
I'd try this: Back up sd if required.
1/ Remove sd from ph and place in a card reader on pc use "SDFormatter" change options format type to Full (Erase) this will erase the Ext Partition & format the card. Put the card back in the ph.
2/ Volume Down + Power Tri color connect usb. Using "HD2 Toolkit" do Task29 this will wipe the ph.
3/ Tri color Using "HD2 Toolkit" install Magldr (don't know about cLK)
4/ Boot ph go into Magldr navigate To "usb flasher" Using "HD2 Toolkit" select "Magldr repartition" Make sure that you are using the recommended partition size for your rom! Flash partition as directed. Ph will reboot go into "ad recovery" "advanced - partition sd card" select 1024m - 0M this will create 3EXT partition. (Some roms are not compatible with 4Ext) Reboot into "Recovery" select "mount sd" move your "Rom.zip" to sd. Close "mount sd" and select "Install zip from sd - Choose zip from sd" select the zip and install and reboot! .....
thanks everyone for your help after a week digging it was my sd card put a new one in and now running sense 3.5 . thanks again
@ a3r0n1 :
thansk for your advise. it took me some days cause i had no time but after i did exactly what you wrote, my newest coredroid rom is running.
Many Thanks !!!!
Hello,
Ive magldr cwm recovery installed, and a magldr NAND rom.
Yesterday i tried to play with rom manager.
I didnt know it only work with clk, and i made the mistake to update recovery throug rom manager.
So it broke my MAGLDR cwm recovery :-(
My question is : can i repair my MAGLDR cwm recovery without wiping my rom?(because i didnt recently do a nandroid backup)
Thx for your help.
Unfortunately, no you can't.
The only way to fix your cwm is to re install cwm. And that will wipe off your rom, data and everything else.
Edit:
wow, i never knew about that !
denseye said:
Hello,
Ive magldr cwm recovery installed, and a magldr NAND rom.
Yesterday i tried to play with rom manager.
I didnt know it only work with clk, and i made the mistake to update recovery throug rom manager.
So it broke my MAGLDR cwm recovery :-(
My question is : can i repair my MAGLDR cwm recovery without wiping my rom?(because i didnt recently do a nandroid backup)
Thx for your help.
Click to expand...
Click to collapse
I think you can do it.
If your phone still don't boot, reflash your Rom without wipe maybe can help
Sent from my GT-I9100 using xda premium
get a version of cwm that loads from sd card,
put it on your sd
from magldr choose 'ad sd'
flash a new cwm.zip using 'instal zip from sd' option.
samsamuel said:
get a version of cwm that loads from sd card,
Click to expand...
Click to collapse
where can I find one ???
samsamuel said:
put it on your sd
from magldr choose 'ad sd'
flash a new cwm.zip using 'instal zip from sd' option.
Click to expand...
Click to collapse
won't it wipe my rom data ???
We are just writing an image to the already created recovery partition,, not using daf to write a partition layout. It's just like flashing a rom, but only the recovery partition is affected.
In the android nand section, titled something like "clockworkrecovery, nand,SD, ver 5.0.2 yes/no stable" or something, (currently top post
Get both
recovery_5.0.2.6_leo_sd.zip (3.93 MB, 1153 views)
and
recovery_5.0.2.6_leo_CWR.zip (4.25 MB, 3415 views)
Extract and copy the SD card ver onto SD card (copy the two files to SD, done)
And then copy the whole cwr.zip to SD card too.
Then, into magldr, "ad SD" will boot into the cwm files you placed on SD, and choose instal zip from SD,,, choose zip,, and select the cwm.zip you also placed on SD.
This will write the cwm image into the recovery partition without reflashing the cwm partition layout, so nothing lost.
it worked
thank you for your help and your very precise explanations
welcome. Its worth leaving those two files on the SD in case recovery fails for whatever reason, since you can backup and restore just like in nand cwm recovery.
samsamuel said:
welcome. Its worth leaving those two files on the SD in case recovery fails for whatever reason, since you can backup and restore just like in nand cwm recovery.
Click to expand...
Click to collapse
yes indeed
I will keep those to files on my sdcard
Many thanks to samsamuel !
i could not get into the CWM menu, but with your help i was able to flash to a new custom rom.
In attempting this, I get the following error:
Writing recovery partition...
assert failed: write_raw_image("/tmp/recovery.img", "recovery")
E:Error in /sdcard/recovery_5.0.2.6_leo_CWR.zip
(Status 7)
Installation aborted.
Any help?
Perhaps the recovery partition is too small? Perhaps you don't have a recovery partition? Check the flash.cfg you last used for partition sizes you used.
Alternatively, use the SD cwm to make a backup and do a fresh flash.
samsamuel said:
Perhaps the recovery partition is too small? Perhaps you don't have a recovery partition? Check the flash.cfg you last used for partition sizes you used.
Alternatively, use the SD cwm to make a backup and do a fresh flash.
Click to expand...
Click to collapse
I have the same error as the person above you. Do you recommend using the SD cwm to flash Recovery_150M_system_44M_cache[v3.0.2.4].zip? I cannot recall what flash.cfg I used.
I think I may have no recovery partition if I recall correctly. I digged through my old files I think this was the flash.cfg I usd:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 150M
cache ya 44M
userdata ya|asize|hr allsize
Click to expand...
Click to collapse
I had the same error. I made a copy of the recovery_5.0.2.6_leo_CWR.zip and copied my original CWMRecovery's recovery-raw.img on top of the new zip's recovery_leo.img file. That got me past the error and AD recovery works now.
Thanks for that just fixing mine as well now
does not work for me, boot AD SD = ssSD Kernel open failed, no idea.
But manage to reinstall the recovery without wipe with Windows version software - HD2 Toolkit, connect USB cable to PC, while phone staying in Andriod, run Toolkit > MAGLDR update recovery > click "update" and done.
gl7 said:
does not work for me, boot AD SD = ssSD Kernel open failed, no idea.
But manage to reinstall the recovery without wipe with Windows version software - HD2 Toolkit, connect USB cable to PC, while phone staying in Andriod, run Toolkit > MAGLDR update recovery > click "update" and done.
Click to expand...
Click to collapse
Same problem here??? Why?
I have the same problem. Add sd dir does not work. I only get back in the menu.
Using the toolkit and update the recovery shows this fault.
Look attachment.
I want to flash the new ics nexus rom without loosing data. Normal i would flash in ad recovery and make a update. Poorly i tried this Tom manager and now my recovery is broken.
Anyone can help? Sry for my german-english.
Wow, I didn't know that
Your radio links are blank
samsamuel said:
get a version of cwm that loads from sd card,
put it on your sd
from magldr choose 'ad sd'
flash a new cwm.zip using 'instal zip from sd' option.
Click to expand...
Click to collapse
Kindly check on the status of your radio links as the seem to lead to a dead end.