hi guys i have used the Recommands partition for the roms 1GB ext4 partition on my sdcard and tried 2GB, flashed WIPE IT and wiped dalvik also tried task29 and started from scratch, any help would be much appreciated really want to try sense 3.5
thanks
Hi, a possible cause of problem - check your zip file (ROM), copy it to PC and try to unpack, may be it's broken. Sometimes you don't have error message when flashing, but when check on PC it shows errors.
thanks mate i will give that a try
i just extract the 2 roms i have been trying to get to work they seems ok
have you got the correct partition size for the rom ?
Which Sense ROM are you using, anyways?
Try a ext 3 partition on your sdcard then run clean install
thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again
cozman85 said:
thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again
Click to expand...
Click to collapse
Have a look at this it enables you to see your partition and convert or revert, might be of some interest to you..... Good Luck.
http://forum.xda-developers.com/showthread.php?t=1154221
can that be flashed on the hd2
cozman85 said:
can that be flashed on the hd2
Click to expand...
Click to collapse
yep... just install via cmw and it will reboot go into ad recovery and you'll see some new options.
Note:Once you reboot it will be gone, if you want it back repeat install.
Nice and handy - Check it out..
Edit: I'm using 4EXTRecovery v2.1.3 RC2 - No problems.
i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext
same problem
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(
Nickman_83 said:
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(
Click to expand...
Click to collapse
cozman85 said:
i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext
Click to expand...
Click to collapse
I'd try this: Back up sd if required.
1/ Remove sd from ph and place in a card reader on pc use "SDFormatter" change options format type to Full (Erase) this will erase the Ext Partition & format the card. Put the card back in the ph.
2/ Volume Down + Power Tri color connect usb. Using "HD2 Toolkit" do Task29 this will wipe the ph.
3/ Tri color Using "HD2 Toolkit" install Magldr (don't know about cLK)
4/ Boot ph go into Magldr navigate To "usb flasher" Using "HD2 Toolkit" select "Magldr repartition" Make sure that you are using the recommended partition size for your rom! Flash partition as directed. Ph will reboot go into "ad recovery" "advanced - partition sd card" select 1024m - 0M this will create 3EXT partition. (Some roms are not compatible with 4Ext) Reboot into "Recovery" select "mount sd" move your "Rom.zip" to sd. Close "mount sd" and select "Install zip from sd - Choose zip from sd" select the zip and install and reboot! .....
thanks everyone for your help after a week digging it was my sd card put a new one in and now running sense 3.5 . thanks again
@ a3r0n1 :
thansk for your advise. it took me some days cause i had no time but after i did exactly what you wrote, my newest coredroid rom is running.
Many Thanks !!!!
Related
Hi All
I don't know what I am doing wrong so I hope someone can help me.
I have tried using Clockworkmod and CLK but i am not able to flash my rom with any of them. I sometimes get a HTC screen but then nothing else. Sometimes my HD2 just reboots after a few seconds.
I have followed the guides word for word and tried CLK but still nothing.
I can update my rom using DAF, but all new roms come out in zip format only.
I have updated my radio to "Radio Leo 2.15.50.14"
I am doing something wrong? Can it be my SD card?
I hope someone can help.
Thank you in advance
Wrong forum.
I'm having the exact same issue - I was just about to open a new thread here but saw this thread and a post stating wrong forum - Please advise where can I post it?
Many thanks
LMGray said:
Hi All
I don't know what I am doing wrong so I hope someone can help me.
I have tried using Clockworkmod and CLK but i am not able to flash my rom with any of them. I sometimes get a HTC screen but then nothing else. Sometimes my HD2 just reboots after a few seconds.
I have followed the guides word for word and tried CLK but still nothing.
I can update my rom using DAF, but all new roms come out in zip format only.
I have updated my radio to "Radio Leo 2.15.50.14"
I am doing something wrong? Can it be my SD card?
I hope someone can help.
Thank you in advance
Click to expand...
Click to collapse
What ROM are you using?
What is System partition Size for that Rom you're using?
Have you used right partition size while flashing MagLdr or Clk?
And have you used Ksubedi's Toolkit?
Because the symptom you're describing is only experienced when you use a partition size smaller than what is recommended.
For example if the Rom requires a partition of ATLEAST 200M and you flash a partition of 150M. You will get stuck at the Logo Screen. AKA HTC Screen. Or as you proclaimed, it won't even boot. So please provide more information as to which Rom and partition size you used and I will try my best to help you.
And don't pay any attention to A jerk telling you "Wrong Forum"
We will help no matter where you post it.
And Spuri give your Rom and install method, I will try my best to help you as well.
Sent from my HTC HD2 using XDA App
Thank you so much - here it goes..
I've been flashing Android roms for a while but for the last couple of weeks I'm having issues with installing any CWR/CLK rom - After flashing the rom, the screen is stuck at GO GO GO and then it goes in a boot loop. I have searched and I have followed all the steps down to the T. Anyway, following are the steps I have taken so far:
Format SD Card using SD Formatter
HSPL3 (2.08)
Task 29 (Using HD2 NAND Toolkit)
Install Radio (2.15) (Using HD2 NAND Toolkit)
Install MAGLDR (Using HD2 NAND Toolkit)
System Partition (As Recommended by the Chef) (Using HD2 NAND Toolkit)
wipe cache partition
Wipe Dalvik Cache
Partition Card with 1GB (As Recommended by the Chef)
install zip from sdcard
Fix Permissions
Reboot
Currently, I'm using BOYPPC-SHIFTPDA_Desire HD A2SD V20 (21.Jul) via DAF method without any issues.
I have used different SD cards but no luck - Currently I'm using 16GB Lexar Class 4. I can flash fine via DAF method. I have also done dual boot with Android and Windows Mobile without any problems. So,if I have successfully run an Android via a SD card (dual boot) so obviously SD card is not the problem?
This is really doing my head in so if anyone can help me with this, that'd be great.
Many thanks
Okay. Try to find Coredroid v1.6. Go here: http://hotfile.com/list/1335611/19f8a51 download the second file. There are instructions in there that you can follow. And since you have already partitioned SdCard, you can skip that part. And Btw, you don't need to do the "Fix Permissions" thing that you stated before. That is only done when you experience problems with apps in the Roms after first boot. And for the above Rom use a partition size of 400M.
Sent from my HTC HD2 using XDA App
rafiqzadah said:
Okay. Try to find Coredroid v1.6. Go here: http://hotfile.com/list/1335611/19f8a51 download the second file. There are instructions in there that you can follow. And since you have already partitioned SdCard, you can skip that part. And Btw, you don't need to do the "Fix Permissions" thing that you stated before. That is only done when you experience problems with apps in the Roms after first boot. And for the above Rom use a partition size of 400M.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thanks for your prompt response - Btw, I forgot to mention that I have a LEO 512 - should I still install the second file which is for LEO 1024?
Rofl sorry ignore the step 1 and then jumping to 3. Just do this exactly. And I have adjusted the file to a EU version Rom with partition of 190m. And so with your SD that was partitioned already, you should be good to go.
1. Go here and Download. http://www.multiupload.com/ZH0WFJBT6P
3. On second Link download HD2_Core_Droid_Desire_HD_V1.6_TMOUS_NAND_ONLY_LEO1 024.rar file 4. In Toolkit Do "Task29." Then Flash MagLdr with size 190M and cache size 5M. 5. After the Flash of Magldr. Boot into MagLdr by HOLDING DOWN!!! Power Button during bootup. 6. Go to Option "5. Usb Flasher." and wait for "Wait USB...USB." 7. Once "Wait USB...USB." is confirmed. Go to the "Daf.exe" file in the COREDROID V1.6 file you downloaded before and "RUN AS ADMINISTRATOR." 8. Once Finished Reboot into MagLdr AGAIN. This Time go to Option "8. AD Recovery." 9. Since you have already Partitioned SD. Then no Need to do so again. 10. Go to "Mounts and Storage" Then "Mount USB Storage" 11. Copy the Pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip to SD. 12. Once finished Hit the "BACK ARROW" Button. 13. Go down to "Flash ZIP From SDCard" then "Choose Zip from SDCard" 14. And Pick Pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip and flash. 15. Once finished, Reboot Phone, Leave it for about 20 Minutes because its First Boot. And Your Done. 16. Hit Thnx if this Helped.
Sent from my HTC HD2 using XDA App
Sorry, I'm a bit confused - Do you want me to flash Pyramid rom or core droid rom? For Pyramid rom, use 190M and for Core Droid 400M right? I did previously try flashing the latest Pyramid rom which 1.7 bit it didn't work - I used 200M for that but I'll try your recommendation and see how it goes.
Thanks.
Yes try the pyramid Rom with my steps exactly and you should be fine. But you have to run the Daf.exe from the Coredroid Rom once you are in Option "5. USB Flasher"
Sent from my HTC HD2 using XDA App
rafiqzadah said:
Yes try the pyramid Rom with my steps exactly and you should be fine. But you have to run the Daf.exe from the Coredroid Rom once you are in Option "5. USB Flasher"
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
One final clarification - You mentioned that I should install 190/5, when I install DAF.exe from the core droid folder, wouldn't that override the 190/5 as I was under the impression that DAF.exe was a partition size as well.
Thanks
EDIT: This step 'Then Flash MagLdr with size 190M and cache size 5M.' I don't understand either - After Task 29, shouldn't I be installing mag and then flashing the 190/5 partition?
Ok - I followed the steps and after flashing the rom, the screen is stuck at GO GO GO - I'm sick of this - I just don't know what's the issue.
Anyone?
I tried flashing HD2_Core_Droid_Desire_HD_V1.6_Release_Version and that's stuck at GO GO GO screen as well.
spuri78 said:
I tried flashing HD2_Core_Droid_Desire_HD_V1.6_Release_Version and that's stuck at GO GO GO screen as well.
Click to expand...
Click to collapse
What flash.cfg did you use for CWR?
The reason of GO GO GO is in my opinion because of small CWR flash.cfg. Because I had the same problem and I just changed as it was in the rom's topic.
dawid. said:
What flash.cfg did you use for CWR?
The reason of GO GO GO is in my opinion because of small CWR flash.cfg. Because I had the same problem and I just changed as it was in the rom's topic.
Click to expand...
Click to collapse
I used the following:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 10M
system ya 390M
cache ya 5M
userdata ya|asize|hr allsize
Just want to reiterate that the GO GO GO issue is after flashing the rom - I can boot in CWR fine - The weird thing is that I have always followed what the chef has recommended in his/her rom - This issue has had me stumped - I virtually can't install any NAND rom - Maybe I should try a third SD card? I just don't know.
Did you try to install the one I gave to you?
Because from what I can see you are trying to install build with HTC SENSE right?
Try to install the one I gave you it is simple clean gingerbread rom.
If you tried then I don't know, try task29 and then try to install it all again.
Or try installing SD card version
Okay I will give you exact instructions. And BTW the Daf.exe is so you can boot into AD Recovery in MagLd.
1. Task 29.
2. Go to toolkit and Center Left you will see box with sizes of 150 200...... Click on 200M. Under that box is a little box with 45M as default cache size, change it to 5M.
4. Go in MagLdr. This is what I mean, try to go to Option "8. AD Recovery." It wont right? So go into Option "5. USB Flasher" and run the Daf.exe from the Coredroid folder and run as administrator.
5. Once finished boot into MagLdr once more this time going to Option "8. AD Recovery."
6. (This step is optional, but mandditory if you have not done so already)Once in AD Recovery, go to "Advance" menu, partition SdCard, and use the size 1024M,it will ask for swap size next, use 0M.
7. Once partitioned, go back to "Mounts and Storage" then to "Mount USB Storage."
8. Once mounted, copy the Pyramid Rom to root of SdCard. Once finished, hit back arrow once.
9. Go to "Install ZIP from SDCard" then "Choose ZIP from SdCard" and choose the Pyramid Rom. Let the flashing finish. And reboot phone.
10. Let the phone settle for 5 minutes in first boot, go through Setup. Then reboot phone.
Sent from my HTC HD2 using XDA App
dawid. said:
Did you try to install the one I gave to you?
Because from what I can see you are trying to install build with HTC SENSE right?
Try to install the one I gave you it is simple clean gingerbread rom.
If you tried then I don't know, try task29 and then try to install it all again.
Or try installing SD card version
Click to expand...
Click to collapse
I was trying all the HTC Sense builds but even a MIUI build giving me headaches - Obviously, I'm doing something wrong but can't figure it out - I have tested the SD card version and that works fine i.e dual boot Windows Mobile and Android - Sorry, which gingerbread rom you want me to install?
I'm heading to work - will try when I get back
spuri78 said:
I was trying all the HTC Sense builds but even a MIUI build giving me headaches - Obviously, I'm doing something wrong but can't figure it out - I have tested the SD card version and that works fine i.e dual boot Windows Mobile and Android - Sorry, which gingerbread rom you want me to install?
I'm heading to work - will try when I get back
Click to expand...
Click to collapse
Download CWR 4.0 and flash it in MAGLDR (it has configured parition size for this rom so just flash it don't change anything): http://www.multiupload.com/VZ1WB57AOY
then
Download this rom: http://www.multiupload.com/8UPNV5WUZU and install it in CWR.
one option: switch to DAF(MAGDLR)....
Hey guys long story short, i have tried to install android on my htc hd2 after not likind windows mobile at all.
Ok installed hardSPL 2.08...ok
task 29.... ok
radio 2.15.50.14 ....ok
mgldr 1.13....ok
run DAF.exe and rom installs fine, mgldr loads and goes to boot but says denied.
so i retried everything and this time tried the CMR way and istalled clockwork, again fine, then downloaded compatible rom for it and installed of sc card and flashed fine, now when it loads the android fella comes on but hangs,
so i then tried the CLK way, again everything installs fine but the rom still hangs,
any suggestions?
forgot to mention i used the 400mb partition size
laytonanthony said:
forgot to mention i used the 400mb partition size
Click to expand...
Click to collapse
Hi,
So what have you got on your phone now?cLK or ,magldr?
And which ROM are you trying to install?
LOL nothing atm just task29 to delete it off, and the rom i would like is [CWR-CLEAN] BOYPPC-SHIFTPDA_GINGER 2.3.4-HoneyComB V29 (12.Jun)
just cant seem to get it to work
ok updating back to factory rom now of HTC website, any pointers after as im gunna go for it again lol! Hate windows 6.5 and 7..
laytonanthony said:
ok updating back to factory rom now of HTC website, any pointers after as im gunna go for it again lol! Hate windows 6.5 and 7..
Click to expand...
Click to collapse
Hi,
Seems like you were doing everything correctly.
According to [OP]:
2.Flash Recovery
- Goto MAGLDR113 menu
- Choose USB Flasher (use Volume down/Volume up button, then press Call button)
- Connect your phone to PC
- Run DAF.exe and follow guide step by step
- Phone auto reboot and go to MAGLDR113 menu
3.Flash rom by recovery.
- copy rom boyppc-shiftpdaxxx.zip to sd card
- goto magdl menu
- ad recovery
- install zip from sdcard
- choose zip from sdcard
- boyppc-shiftpda xxx.zip
- yes.....waiting android boot.....
Make sure you use a card reader to transfer rom to sd card.Less chance of corrupting files.
P.S. ROM can take 15-20 minutes to boot
ok so that rom i posted above will work on mgldr but also will support clockwork!
laytonanthony said:
ok so that rom i posted above will work on mgldr but also will support clockwork!
Click to expand...
Click to collapse
HI,
Magldr is the bootloader(required)
Clockworkmod will flash the necessary partition for the system to run.
ok just tries the DAF.exe way throught MGLDR option 5 usb, installed, went to boot and went to boot and got "NAND kernal open failed"
hmmmm
laytonanthony said:
ok just tries the DAF.exe way throught MGLDR option 5 usb, installed, went to boot and went to boot and got "NAND kernal open failed"
hmmmm
Click to expand...
Click to collapse
Have you partitioned your sd card?
partition sd card? .....
laytonanthony said:
partition sd card? .....
Click to expand...
Click to collapse
OK,
Before flashing clockworkmod,go to magldr>ad recovery>advanced>Partition SD Card.1024m with 0 cache
ok partitioned, what next pal!
laytonanthony said:
ok partitioned, what next pal!
Click to expand...
Click to collapse
2.Flash Recovery
- Goto MAGLDR113 menu
- Choose USB Flasher (use Volume down/Volume up button, then press Call button)
- Connect your phone to PC
- Run DAF.exe and follow guide step by step
- Phone auto reboot and go to MAGLDR113 menu
3.Flash rom by recovery.
- copy rom boyppc-shiftpdaxxx.zip to sd card
- goto magdl menu
- ad recovery
- install zip from sdcard
- choose zip from sdcard
- boyppc-shiftpda xxx.zip
- yes.....waiting android boot.....
Make sure you use a card reader to transfer rom to sd card.Less chance of corrupting files.P.S. ROM can take 15-20 minutes to boot
ok pal i tried partitioning sd-card and was sucessful, then i tried the DAF.exe install and again failed so then i transferd the zip file over to the SD card and installed of card, and what do you no it,,,,, hey presto it worked, took some time to book but it booted lol.
thanks a bunch, send me a donation paypal link or even just ur paypal address and ill send you a drink over
again thank you fella!
+1 thanks was lookin for this answer all day thanks
hi guys
so yesterday i decided to update my miui rom and when i installed the new update through magldr CMR, hd2 won't go in android now its getting stuck on the HTC splash screen all the time i tried many different roms and i even went back to WM and then reflashed magldr and CMR thought that might fix the problem but it didn't so can u guys help me out
I was running the NDT MIUI GINGER V12.0 and i tried to update it to V14.0 and thats where the whole issue started
so help me out guys thanks
jimprime said:
hi guys
so yesterday i decided to update my miui rom and when i installed the new update through magldr CMR, hd2 won't go in android now its getting stuck on the HTC splash screen all the time i tried many different roms and i even went back to WM and then reflashed magldr and CMR thought that might fix the problem but it didn't so can u guys help me out
I was running the NDT MIUI GINGER V12.0 and i tried to update it to V14.0 and thats where the whole issue started
so help me out guys thanks
Click to expand...
Click to collapse
Hi,
Are you setting the correct CWM partition for the ROM and your phone?
am not sure i understand, if the same rom's older version was working properly why do i need to change the CWM partition for the next version
and also can u link me to the thread which can show me how to change the partition of the CWM recovery
thanks
jimprime said:
am not sure i understand, if the same rom's older version was working properly why do i need to change the CWM partition for the next version
and also can u link me to the thread which can show me how to change the partition of the CWM recovery
thanks
Click to expand...
Click to collapse
Hi,
Reading through the [OP] of your ROM,it appears that you don't need to change your partition,but having tried various other ROMS,it's best to start fresh.
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Open the toolkit.
Choose magldr repartition,choose 150MB and cache 5MB.Press repartition.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.
malybru said:
Hi,
Reading through the [OP] of your ROM,it appears that you don't need to change your partition,but having tried various other ROMS,it's best to start fresh.
Before starting anything,BACKUP YOUR DATA.
Download THIS TOOL (Don't forget to thank him for his work)
Open the toolkit.
Choose magldr repartition,choose 150MB and cache 5MB.Press repartition.(via number 5 usb flasher)
Then go to ad recovery and wipe data,cache partition,and dalvik(advanced).
Then go to install zip from sd card
Choose zip from sd card (which you should have placed on the root of your sd card,using a card reader)
After installation,reboot.
Give it time.
Some ROMS take 15-20 minutes to install.
Click to expand...
Click to collapse
How do you restore your data after doing all this?
Hi,
I have researched all the forums and threads and none have worked for me.
I had a previous rom installed and tried to install a new one and got this error at start "Nand open Kernal failed"
Can anyone tell me please how to fix this and install a new or previous rom?
xda_apprentice said:
Hi,
I have researched all the forums and threads and none have worked for me.
I had a previous rom installed and tried to install a new one and got this error at start "Nand open Kernal failed"
Can anyone tell me please how to fix this and install a new or previous rom?
Click to expand...
Click to collapse
Are you using CLK or Magldr (CWM)?
What exact procedure did you follow to flash the new Rom (and what Rom is it)?
Have you tried flashing other Roms?
Mark.
mskip said:
Are you using CLK or Magldr (CWM)?
What exact procedure did you follow to flash the new Rom (and what Rom is it)?
Have you tried flashing other Roms?
Mark.
Click to expand...
Click to collapse
Thanks for your reply Mark. The rom in question is "Dorimanx-Rom-2.8.4-Nightly-209-HIGH-END-CLK"
The procedure I followed using Magldr was:
1) task 29
2) flashed Radio
3) flashed mgldr
4)in mgldr repartition I choose 150mb partition size, 5 cache size, clicked repartition
5)mgldr, ad recovery, advanced, partition sd card , 1024, 0
6)ad recovery-mounts and storage-mount usb storage-when pc sees phone, send rom to phone
7)mgldr menu-ad recovery-install zip from sd-choose zip from sd-find your rom and choose with call button-after installation is complete reboot phone.
I am back on stock Windows Mobile 6.5 as I need a working phone.
xda_apprentice said:
Thanks for your reply Mark. The rom in question is "Dorimanx-Rom-2.8.4-Nightly-209-HIGH-END-CLK"
The procedure I followed using Magldr was:
1) task 29
2) flashed Radio
3) flashed mgldr
4)in mgldr repartition I choose 150mb partition size, 5 cache size, clicked repartition
5)mgldr, ad recovery, advanced, partition sd card , 1024, 0
6)ad recovery-mounts and storage-mount usb storage-when pc sees phone, send rom to phone
7)mgldr menu-ad recovery-install zip from sd-choose zip from sd-find your rom and choose with call button-after installation is complete reboot phone.
I am back on stock Windows Mobile 6.5 as I need a working phone.
Click to expand...
Click to collapse
the reason it failed is because you are using a cLK build for Magldr. Magldr uses a boot folder which contains an initd.gz and a zImage. cLK uses a raw boot.img like native android phones. Hope this helps.
[email protected] said:
the reason it failed is because you are using a cLK build for Magldr. Magldr uses a boot folder which contains an initd.gz and a zImage. cLK uses a raw boot.img like native android phones. Hope this helps.
Click to expand...
Click to collapse
As the previous user stated you have tried to flash a CLK Rom via the CWM method.
You need to download the correct type (with Dorimanx it will be the Dorimanx-Rom-2.8.4-Nightly-209-HIGH-END-MAG.zip version) and flash it via CWM Recovery as you did before.
It should work fine if you do that as everything else you did was correct.
Mark.
Hi i have htc hd 2 that is rooted and has
Android 2.3.4
15.42.50.11U_2.15.50.14
Kernel
2.6.32.15_tytung_r10-gbdfeaac
Mod version
CyanogenMod 7-05252011-Nightly-Desire)Typhoon_v3.3.3-Magldr)
Number
Grj22
And i want to change the rom with the most recent easy...and simple..(i have rom manager not the paid)
I dont know wich rom to put and how...can someone please tell me and help me???
Simple please because i dont know much...if it possible to copy the file at sd and just press the sd install from the recovery ...
Do you have the cLK bootloader installed? If you don't, you can't use ROM manager properly on the HD2.
However, I'd suggest downloading the ROM you want from the browser, booting the HD2 into MAGDLR--> recovery, and installing from there. [ That is assuming you using MADGLR, which I'm assuming you are].
ntisco said:
Hi i have htc hd 2 that is rooted and has
Android 2.3.4
15.42.50.11U_2.15.50.14
Kernel
2.6.32.15_tytung_r10-gbdfeaac
Mod version
CyanogenMod 7-05252011-Nightly-Desire)Typhoon_v3.3.3-Magldr)
Number
Grj22
And i want to change the rom with the most recent easy...and simple..(i have rom manager not the paid)
I dont know wich rom to put and how...can someone please tell me and help me???
Simple please because i dont know much...if it possible to copy the file at sd and just press the sd install from the recovery ...
Click to expand...
Click to collapse
Copy the rom you want to your sd card (download after which bootloader you are using)
Wipe data/cache/dalvik from cwm and install rom.
and how do i know wich bootloader i use?And if you be kind could you tell me by a link wich rom is mach to my phone without problems?
When you boot up your phone, do you see a cmd-like screen showing some text after the htc screen? If so, you are using MAGLDR. Otherwise, cLK.
yes there is one...like some comand are runing and writes "ok" "done" and after that is the android logo..
so
wich rom is the best fit to hd2 and how to i put it in?
Is this the way? "Wipe data/cache/dalvik from cwm and install rom" and if so the file with the rom i put it on sd card root?or in a folder?
Sorry for the lot of guestions..
ntisco said:
yes there is one...like some comand are runing and writes "ok" "done" and after that is the android logo..
so
wich rom is the best fit to hd2 and how to i put it in?
Is this the way? "Wipe data/cache/dalvik from cwm and install rom" and if so the file with the rom i put it on sd card root?or in a folder?
Sorry for the lot of guestions..
Click to expand...
Click to collapse
The best ROM depends on what you like. I'd suggest using Tytung's NexusHD2. http://forum.xda-developers.com/showthread.php?t=1434860
So, to install this ROM, you need to-
1. download the ROM and put it on your SD card. Just download it from your PC and drag it onto the SD card root, not in a folder. [it doesn't matter that much, but it's easier to just have it there instead of in a folder].
2. Boot into MAGDLR. Do this by holding the volume DOWN button and end call button at the same time while booting the phone.
3. In MAGDLR, scroll down into AD Recovery. From there, wipe data/factory reset, then install the .zip from SD card. Reboot your phone and enjoy the new ROM.
ElectroBeijing said:
The best ROM depends on what you like. I'd suggest using Tytung's NexusHD2. http://forum.xda-developers.com/showthread.php?t=1434860
So, to install this ROM, you need to-
1. download the ROM and put it on your SD card. Just download it from your PC and drag it onto the SD card root, not in a folder. [it doesn't matter that much, but it's easier to just have it there instead of in a folder].
2. Boot into MAGDLR. Do this by holding the volume DOWN button and end call button at the same time while booting the phone.
3. In MAGDLR, scroll down into AD Recovery. From there, wipe data/factory reset, then install the .zip from SD card. Reboot your phone and enjoy the new ROM.
Click to expand...
Click to collapse
Yes this is mostly right but:
1. Use the app Titanium Backup to create a backup of all your apps and data on your SD card
2. To boot into MAGLDR hold down the power button, not volume down
3. Before wiping data I would recommend creating a full backup of your ROM in CWM, just in case
Also, you may need to repartition your NAND if necessary. Look in the first few posts of any ROM you decide to flash, it will at some point tell you what size 'system partition' you will need to create. If this partition size is less than or the same as 150Mb, you don't need to change anything. If, however, it is larger than 150Mb do the following:
1. Download and install the NAND Toolkit
2. Boot into MAGLDR menu then select 5. USB Flasher
3. Select 'MAGLDR repartition' in the toolkit
4. Select the correct partition size from the options given in the toolkit
5. Repartition
6. Flash your ROM (as a .zip) in CWM
7. Reboot, then reboot another few times just to be safe
8. (Optional) Restore your apps by downloading Titanuim backup, then pressing menu>batch>restore all missing apps and data.
Hope this helps