Database Users

[q] magldr stuck multiple problems please help!!!!!!!!!!!!!!!!

im having a couple of problems. when my phone turns on it goes straight to MAGLDR and says SD KERNEL OPEN FAILED.i have read numerous threads and still dont understand what i should do about this. the next problem is when i try to unzip a rom it says the "installation aborted" i would very greatful if u could help me get out of the MAGLDR menu and back to having a working phone. i have tried to flash back to a stock rom but i cant get my phone to connect to active sync. i have been struggling all day and cant figure out where i went wrong and i need your help please. I cant get out of MAGLDR at all and all i want is to flash back to a stock rom or any rom for that matter so i can use my phone again. Im sorry for creating a new thread because i know alot of people are having similar problems but i couldnt find an answer.
thanks adam

You need to flash ClockworkMod Recovery with the appropriate size system partition for the nand rom you intend to install. Flash the recovery from your pc with MAGLDR in usb flasher mode. Then in MAGLDR choose AD Recovery, and in recovery, choose 'install zip from sd', then pick 'choose zip from sd card' and choose the zip that is the rom you wish to install. Dont unzip it, Clockwork Recovery installs from .zip files.
Sent from my HTC HD2 using XDA App

huggs said:
You need to flash ClockworkMod Recovery with the appropriate size system partition for the nand rom you intend to install. Flash the recovery from your pc with MAGLDR in usb flasher mode. Then in MAGLDR choose AD Recovery, and in recovery, choose 'install zip from sd', then pick 'choose zip from sd card' and choose the zip that is the rom you wish to install. Dont unzip it, Clockwork Recovery installs from .zip files.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
im looking to flash HD2_NDT_MIUI_FROYO_ROM_V6.2_Multilang what would be the proper CWM recovery v1.3??

150 mb for that rom
For just about any rom, the cwm partiton size can be found in the first couple posts of the rom thread

huggs said:
150 mb for that rom
For just about any rom, the cwm partiton size can be found in the first couple posts of the rom thread
Click to expand...
Click to collapse
im not sure what u meen by partition size how do i select that and do u know of a way i could connect to active sync so i can just flash stock rom. in MAGLDR i havnt found a way to connect to active sync. any suggestions on how to go back to stock? thanks for helping.

Power your phone on while holding the vol down button. Your screen will have 4 colored bars. You can flash a stock rom from there. Your phone won't connect to ActiveSync or Windows Device Center while in this mode, but the stock windows rom will flash.

huggs said:
Power your phone on while holding the vol down button. Your screen will have 4 colored bars. You can flash a stock rom from there. Your phone won't connect to ActiveSync or Windows Device Center while in this mode, but the stock windows rom will flash.
Click to expand...
Click to collapse
so i tried flashing back to stock rom but when it brings up the loading bar it stays at 0% and its been there for about 6 minutes...........

sounds like you flashed the wrong rom

huggs said:
sounds like you flashed the wrong rom
Click to expand...
Click to collapse
i finally got it to work i had to flash the stock radio to get it to flash the stock rom for some reason thanks for helping me

No problem, glad your phone isn't wrecked. If you still want to use Android, but don't want to mess with flashing it to your phone's internal memory, you can always use sd builds. Then you still have WinMo, and you can even have multiple different Android builds on your sd card, in different folders, there are programs for Windows Mobile that will even launch Android for you and let you choose which build to launch. It's alot simpler than flashing nand roms, just drag n drop a folder onto your sd card and bot into WM, use File Explorer to navigate into the folder, tap CLRCAD and haret.exe , and Android launches.

Unable to use flash using CLK and Clockworkmod

Hi All
I don't know what I am doing wrong so I hope someone can help me.
I have tried using Clockworkmod and CLK but i am not able to flash my rom with any of them. I sometimes get a HTC screen but then nothing else. Sometimes my HD2 just reboots after a few seconds.
I have followed the guides word for word and tried CLK but still nothing.
I can update my rom using DAF, but all new roms come out in zip format only.
I have updated my radio to "Radio Leo 2.15.50.14"
I am doing something wrong? Can it be my SD card?
I hope someone can help.
Thank you in advance

Wrong forum.

I'm having the exact same issue - I was just about to open a new thread here but saw this thread and a post stating wrong forum - Please advise where can I post it?
Many thanks

LMGray said:
Hi All
I don't know what I am doing wrong so I hope someone can help me.
I have tried using Clockworkmod and CLK but i am not able to flash my rom with any of them. I sometimes get a HTC screen but then nothing else. Sometimes my HD2 just reboots after a few seconds.
I have followed the guides word for word and tried CLK but still nothing.
I can update my rom using DAF, but all new roms come out in zip format only.
I have updated my radio to "Radio Leo 2.15.50.14"
I am doing something wrong? Can it be my SD card?
I hope someone can help.
Thank you in advance
Click to expand...
Click to collapse
What ROM are you using?
What is System partition Size for that Rom you're using?
Have you used right partition size while flashing MagLdr or Clk?
And have you used Ksubedi's Toolkit?
Because the symptom you're describing is only experienced when you use a partition size smaller than what is recommended.
For example if the Rom requires a partition of ATLEAST 200M and you flash a partition of 150M. You will get stuck at the Logo Screen. AKA HTC Screen. Or as you proclaimed, it won't even boot. So please provide more information as to which Rom and partition size you used and I will try my best to help you.
And don't pay any attention to A jerk telling you "Wrong Forum"
We will help no matter where you post it.
And Spuri give your Rom and install method, I will try my best to help you as well.
Sent from my HTC HD2 using XDA App

Thank you so much - here it goes..
I've been flashing Android roms for a while but for the last couple of weeks I'm having issues with installing any CWR/CLK rom - After flashing the rom, the screen is stuck at GO GO GO and then it goes in a boot loop. I have searched and I have followed all the steps down to the T. Anyway, following are the steps I have taken so far:
Format SD Card using SD Formatter
HSPL3 (2.08)
Task 29 (Using HD2 NAND Toolkit)
Install Radio (2.15) (Using HD2 NAND Toolkit)
Install MAGLDR (Using HD2 NAND Toolkit)
System Partition (As Recommended by the Chef) (Using HD2 NAND Toolkit)
wipe cache partition
Wipe Dalvik Cache
Partition Card with 1GB (As Recommended by the Chef)
install zip from sdcard
Fix Permissions
Reboot
Currently, I'm using BOYPPC-SHIFTPDA_Desire HD A2SD V20 (21.Jul) via DAF method without any issues.
I have used different SD cards but no luck - Currently I'm using 16GB Lexar Class 4. I can flash fine via DAF method. I have also done dual boot with Android and Windows Mobile without any problems. So,if I have successfully run an Android via a SD card (dual boot) so obviously SD card is not the problem?
This is really doing my head in so if anyone can help me with this, that'd be great.
Many thanks

Okay. Try to find Coredroid v1.6. Go here: http://hotfile.com/list/1335611/19f8a51 download the second file. There are instructions in there that you can follow. And since you have already partitioned SdCard, you can skip that part. And Btw, you don't need to do the "Fix Permissions" thing that you stated before. That is only done when you experience problems with apps in the Roms after first boot. And for the above Rom use a partition size of 400M.
Sent from my HTC HD2 using XDA App

rafiqzadah said:
Okay. Try to find Coredroid v1.6. Go here: http://hotfile.com/list/1335611/19f8a51 download the second file. There are instructions in there that you can follow. And since you have already partitioned SdCard, you can skip that part. And Btw, you don't need to do the "Fix Permissions" thing that you stated before. That is only done when you experience problems with apps in the Roms after first boot. And for the above Rom use a partition size of 400M.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thanks for your prompt response - Btw, I forgot to mention that I have a LEO 512 - should I still install the second file which is for LEO 1024?

Rofl sorry ignore the step 1 and then jumping to 3. Just do this exactly. And I have adjusted the file to a EU version Rom with partition of 190m. And so with your SD that was partitioned already, you should be good to go.
1. Go here and Download. http://www.multiupload.com/ZH0WFJBT6P
3. On second Link download HD2_Core_Droid_Desire_HD_V1.6_TMOUS_NAND_ONLY_LEO1 024.rar file 4. In Toolkit Do "Task29." Then Flash MagLdr with size 190M and cache size 5M. 5. After the Flash of Magldr. Boot into MagLdr by HOLDING DOWN!!! Power Button during bootup. 6. Go to Option "5. Usb Flasher." and wait for "Wait USB...USB." 7. Once "Wait USB...USB." is confirmed. Go to the "Daf.exe" file in the COREDROID V1.6 file you downloaded before and "RUN AS ADMINISTRATOR." 8. Once Finished Reboot into MagLdr AGAIN. This Time go to Option "8. AD Recovery." 9. Since you have already Partitioned SD. Then no Need to do so again. 10. Go to "Mounts and Storage" Then "Mount USB Storage" 11. Copy the Pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip to SD. 12. Once finished Hit the "BACK ARROW" Button. 13. Go down to "Flash ZIP From SDCard" then "Choose Zip from SDCard" 14. And Pick Pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip and flash. 15. Once finished, Reboot Phone, Leave it for about 20 Minutes because its First Boot. And Your Done. 16. Hit Thnx if this Helped.
Sent from my HTC HD2 using XDA App

Sorry, I'm a bit confused - Do you want me to flash Pyramid rom or core droid rom? For Pyramid rom, use 190M and for Core Droid 400M right? I did previously try flashing the latest Pyramid rom which 1.7 bit it didn't work - I used 200M for that but I'll try your recommendation and see how it goes.
Thanks.

Yes try the pyramid Rom with my steps exactly and you should be fine. But you have to run the Daf.exe from the Coredroid Rom once you are in Option "5. USB Flasher"
Sent from my HTC HD2 using XDA App

rafiqzadah said:
Yes try the pyramid Rom with my steps exactly and you should be fine. But you have to run the Daf.exe from the Coredroid Rom once you are in Option "5. USB Flasher"
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
One final clarification - You mentioned that I should install 190/5, when I install DAF.exe from the core droid folder, wouldn't that override the 190/5 as I was under the impression that DAF.exe was a partition size as well.
Thanks
EDIT: This step 'Then Flash MagLdr with size 190M and cache size 5M.' I don't understand either - After Task 29, shouldn't I be installing mag and then flashing the 190/5 partition?

Ok - I followed the steps and after flashing the rom, the screen is stuck at GO GO GO - I'm sick of this - I just don't know what's the issue.
Anyone?

I tried flashing HD2_Core_Droid_Desire_HD_V1.6_Release_Version and that's stuck at GO GO GO screen as well.

spuri78 said:
I tried flashing HD2_Core_Droid_Desire_HD_V1.6_Release_Version and that's stuck at GO GO GO screen as well.
Click to expand...
Click to collapse
What flash.cfg did you use for CWR?
The reason of GO GO GO is in my opinion because of small CWR flash.cfg. Because I had the same problem and I just changed as it was in the rom's topic.

dawid. said:
What flash.cfg did you use for CWR?
The reason of GO GO GO is in my opinion because of small CWR flash.cfg. Because I had the same problem and I just changed as it was in the rom's topic.
Click to expand...
Click to collapse
I used the following:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 10M
system ya 390M
cache ya 5M
userdata ya|asize|hr allsize
Just want to reiterate that the GO GO GO issue is after flashing the rom - I can boot in CWR fine - The weird thing is that I have always followed what the chef has recommended in his/her rom - This issue has had me stumped - I virtually can't install any NAND rom - Maybe I should try a third SD card? I just don't know.

Did you try to install the one I gave to you?
Because from what I can see you are trying to install build with HTC SENSE right?
Try to install the one I gave you it is simple clean gingerbread rom.
If you tried then I don't know, try task29 and then try to install it all again.
Or try installing SD card version

Okay I will give you exact instructions. And BTW the Daf.exe is so you can boot into AD Recovery in MagLd.
1. Task 29.
2. Go to toolkit and Center Left you will see box with sizes of 150 200...... Click on 200M. Under that box is a little box with 45M as default cache size, change it to 5M.
4. Go in MagLdr. This is what I mean, try to go to Option "8. AD Recovery." It wont right? So go into Option "5. USB Flasher" and run the Daf.exe from the Coredroid folder and run as administrator.
5. Once finished boot into MagLdr once more this time going to Option "8. AD Recovery."
6. (This step is optional, but mandditory if you have not done so already)Once in AD Recovery, go to "Advance" menu, partition SdCard, and use the size 1024M,it will ask for swap size next, use 0M.
7. Once partitioned, go back to "Mounts and Storage" then to "Mount USB Storage."
8. Once mounted, copy the Pyramid Rom to root of SdCard. Once finished, hit back arrow once.
9. Go to "Install ZIP from SDCard" then "Choose ZIP from SdCard" and choose the Pyramid Rom. Let the flashing finish. And reboot phone.
10. Let the phone settle for 5 minutes in first boot, go through Setup. Then reboot phone.
Sent from my HTC HD2 using XDA App

dawid. said:
Did you try to install the one I gave to you?
Because from what I can see you are trying to install build with HTC SENSE right?
Try to install the one I gave you it is simple clean gingerbread rom.
If you tried then I don't know, try task29 and then try to install it all again.
Or try installing SD card version
Click to expand...
Click to collapse
I was trying all the HTC Sense builds but even a MIUI build giving me headaches - Obviously, I'm doing something wrong but can't figure it out - I have tested the SD card version and that works fine i.e dual boot Windows Mobile and Android - Sorry, which gingerbread rom you want me to install?
I'm heading to work - will try when I get back

spuri78 said:
I was trying all the HTC Sense builds but even a MIUI build giving me headaches - Obviously, I'm doing something wrong but can't figure it out - I have tested the SD card version and that works fine i.e dual boot Windows Mobile and Android - Sorry, which gingerbread rom you want me to install?
I'm heading to work - will try when I get back
Click to expand...
Click to collapse
Download CWR 4.0 and flash it in MAGLDR (it has configured parition size for this rom so just flash it don't change anything): http://www.multiupload.com/VZ1WB57AOY
then
Download this rom: http://www.multiupload.com/8UPNV5WUZU and install it in CWR.

one option: switch to DAF(MAGDLR)....

[Q] Can't install MAGLDR113 on my HTC HD2

Hi guys, Im a noob.
When i tried to install the ROMUpdateUtillity, it was smooth on the front part, but when it start installing, it always 0%, and after that, it pop up a error dialog... I followed every instruction in the ROMUpdateUtility. please help me.
I'm using Window 7
Window Mobile Centre 6.1
Thanks.

Go to Xda Hd2 Nand Development and at the top on the thread there will be a toolkit thread. You can search it in Google too. Toolkit is called HD2 Nand Toolkit by Ksubedi. Download the tool. And flash HSPL 2.08. Then flash Task29. Then flash MagLdr through that tool. You can set the size of the partition of MagLdr in center left.
Hit thnkx if this helped.
Sent from my HTC HD2 using XDA App

i guess u didnt change ur hspl ...change it first to 2.08 befor installing magldr

Thank guys, thank you so much

Omg guys, my HD2 can't load into the MAGLDR113 menu, it stuck at the HTC logo start up screen. it can't load into the phone too...

stucking at the htc screen means that theres a clean nand
did you task29? if yes, try to install magldr again..
follow these steps:
install hspl 4 (2.08 HSPL)
install radio 2.15.50.14 rom
Task29 (clean nand)
install magldr
install cwm
goto cwm (AD Recovery @ magldr menu)
flash rom (install zip from sd card - choose zip from sd card)
have fun
if you need to go manually into magldr menu, keep pressing phone end button while booting.
if this is just too much, just try to use a toolkit (like the nand toolkit or mine (click on banner in my signature )
hope it´ll help a bit.

I still can't figure out how to boot into the MGLDR113 menu, i tried reinstall it and try press the end call button many times when booting up. its not working... omg...
Thanks

Its works now, because i missed out the Radio installation part so it won't work.
I'm now using the EasyAndroid software, its really easy to use, it is design for idiot like me hahaha.
Thank you very much.

kenex91 said:
Its works now, because i missed out the Radio installation part so it won't work.
I'm now using the EasyAndroid software, its really easy to use, it is design for idiot like me hahaha.
Thank you very much.
Click to expand...
Click to collapse
well dont say idiot about urself ... no one was born knowing how to install android ... ignorant would be the perfect word ...just kidding

aaa... i installed the COREDRIOD into my phone and everything was fine. But when i restart my phone and boot it up, it stuck at the COREDROID logo. i waited for 15min and it still stuck there.
Do i have to wait longer? or i having a problem here?

have you made the necessary CWR partition for this rom?

nope.. how much should i partition them?

kenex91 said:
nope.. how much should i partition them?
Click to expand...
Click to collapse
Mostly it will say so in the ROM Thread, or a Readme file in the file you downloaded.

kenex91 said:
nope.. how much should i partition them?
Click to expand...
Click to collapse
in coredroid roms the necessary CWR partition comes within the downloaded rar. when you unpack it you'll see an exe file 'daf'.in your phone go to mgldr menu,with volume buttons come to 'usb flasher' you must see 'usb flasher....usb',right click on daf,choose run as administrator. now follow your screen to finish it. then in mgldr AD recovery-install zip from sdcard-choose zip from sdcard then in your sd find your coredroid........zip, choose it, after it finishes reboot and wait....

mutil said:
in coredroid roms the necessary CWR partition comes within the downloaded rar. when you unpack it you'll see an exe file 'daf'.in your phone go to mgldr menu,with volume buttons come to 'usb flasher' you must see 'usb flasher....usb',right click on daf,choose run as administrator. now follow your screen to finish it. then in mgldr AD recovery-install zip from sdcard-choose zip from sdcard then in your sd find your coredroid........zip, choose it, after it finishes reboot and wait....
Click to expand...
Click to collapse
i don't have DAF in the 300MB CoreDroid zip file, but i have it in the MAGLDR113. is that the same? or i have find CoreDroid DAF?, I read the forum of CoreDroid again and again. There is no DAF.exe file to download.
Please help me
Thank you.

is this the DAF? I don't understand them at all...
What is in the required NAND Partition (flash.cfg)
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 10M
system ya 390M
cache ya 5M
userdata ya|asize|hr allsize

in the first page of nand development there is hd2 nand toolkit by ksubedi. i use it. it has many tools. better download it. on left there is mgldr repartition choose 300 MB and at cache part write 5, then connect your phone to pc choose usb flasher....

or use this attached folder.

Its still not working. Still having the same problem.
This are the steps i have done.
-install hspl 4 (2.08 HSPL)
-install radio 2.15.50.14 rom
-Task29 (clean nand)
-install magldr113
-Go to USB FLASHER
-Repartition using Toolkit (300MB, 5mb Cache)
-flash rom (install CoreDroid from SDcard in zip format)
Stuck at the CoreDroid Logo Start up Screen.
Did i miss out anything to be done?
Please help me out.
Thank you.

if you use eu-hd2 this rom and many others need an ext partition in sd card. do you have an ext partition?

[Q] sense 3.5 roms stuck at boot screen

hi guys i have used the Recommands partition for the roms 1GB ext4 partition on my sdcard and tried 2GB, flashed WIPE IT and wiped dalvik also tried task29 and started from scratch, any help would be much appreciated really want to try sense 3.5
thanks

Hi, a possible cause of problem - check your zip file (ROM), copy it to PC and try to unpack, may be it's broken. Sometimes you don't have error message when flashing, but when check on PC it shows errors.

thanks mate i will give that a try

i just extract the 2 roms i have been trying to get to work they seems ok

have you got the correct partition size for the rom ?

Which Sense ROM are you using, anyways?

Try a ext 3 partition on your sdcard then run clean install

thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again

cozman85 said:
thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again
Click to expand...
Click to collapse
Have a look at this it enables you to see your partition and convert or revert, might be of some interest to you..... Good Luck.
http://forum.xda-developers.com/showthread.php?t=1154221

can that be flashed on the hd2

cozman85 said:
can that be flashed on the hd2
Click to expand...
Click to collapse
yep... just install via cmw and it will reboot go into ad recovery and you'll see some new options.
Note:Once you reboot it will be gone, if you want it back repeat install.
Nice and handy - Check it out..
Edit: I'm using 4EXTRecovery v2.1.3 RC2 - No problems.

i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext

same problem
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(

Nickman_83 said:
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(
Click to expand...
Click to collapse
cozman85 said:
i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext
Click to expand...
Click to collapse
I'd try this: Back up sd if required.
1/ Remove sd from ph and place in a card reader on pc use "SDFormatter" change options format type to Full (Erase) this will erase the Ext Partition & format the card. Put the card back in the ph.
2/ Volume Down + Power Tri color connect usb. Using "HD2 Toolkit" do Task29 this will wipe the ph.
3/ Tri color Using "HD2 Toolkit" install Magldr (don't know about cLK)
4/ Boot ph go into Magldr navigate To "usb flasher" Using "HD2 Toolkit" select "Magldr repartition" Make sure that you are using the recommended partition size for your rom! Flash partition as directed. Ph will reboot go into "ad recovery" "advanced - partition sd card" select 1024m - 0M this will create 3EXT partition. (Some roms are not compatible with 4Ext) Reboot into "Recovery" select "mount sd" move your "Rom.zip" to sd. Close "mount sd" and select "Install zip from sd - Choose zip from sd" select the zip and install and reboot! .....

thanks everyone for your help after a week digging it was my sd card put a new one in and now running sense 3.5 . thanks again

@ a3r0n1 :
thansk for your advise. it took me some days cause i had no time but after i did exactly what you wrote, my newest coredroid rom is running.
Many Thanks !!!!

HD2 hangs on 02 logo

please i need a perfect ROM to upgrad my phone.
here is my phone infio:
PB81100
SPL-1.42
also if i can get any magical hints on how to get HSPL to install on spl 1.42?

tr3pplea said:
also if i can get any magical hints on how to get HSPL to install on spl 1.42?
Click to expand...
Click to collapse
hmm, magic, , ,
phone into bootlaoder
connect to usb
run hspl 2
select desired spl/hspl (i'm guessing you wanna go to android, so choose 2.08.hspl)
click start or go or whatever teh button says
abaracadabara
hspl.

update failed
I have been able to upgrade the phone from SPL-2.0.8 I followed the bellow steps but it got to point and show " UPDATE TERMINATE UPADATE FAILED"
.Copy leoimg.nbh to SD card storage.
14.Disconnect USB cable from phone.
15.Open ‘File Explorer’.
16.Go to ‘Storage Card’.
17.Confirm that leoimg.nbh is in SD card root level.
18.Power off your phone.
19.Press volume down button (don’t let go) and power on your phone.
20.It will load into bootloader.
21.You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
22.Let go volume down button when you see ‘loading…’.
23.Then ROM upgrade screen will be loaded.
24.Press power button to start update the ROM.
25.ROM update process will take around 15 minutes.

Gosh, you're doing it in such a complicated way. I'll give you a simple idiot proof guide. (Android guide, as wp7 is too easy)
1. Flash the correct hspl and radio according to what the rom thread says, download links of these should be provided on rom thread.
2. Install MAGLDR (So much easier to use than CLK) From here
3. Install Clockwork mod recovery, from here
Although before flashing go onto the android rom thead that you wish you flash and on there you will see the recomended system and cache sizes. Once you unzip the clockwork download file, you should see a file called: Flash.cfg Open/edit this file and then enter the recommended files from the thread.
4. Then go onto the thread and download the nandroid rom you wish to flash.
5. Go onto MAGLDR and click on option mount storage and then mount SD card, then simply put the zip rom into the root of the sd card.
6. On Magldr select the option of Nand recovery.
7. Voila you're in Clockwork mod recovery, now clear system data, and clear cache. After that go onto additional options and clear the dalvik cache.
8.Next just simply follow the recovery steps and install zip from sd card and flash the rom.
9. Once flashed it should automatically reboot and select Nand as default boot, and load the android rom.
Simple.
Sent from my NexusHD2 using xda premium

Tenpin said:
5. Go to option 4 on MAGLDR and mount your sd card, then simply put the zip rom into the root of the sd card.
Click to expand...
Click to collapse
the magldr sd mount doesn't always work, sometimes corrupts larger files. Safer to use teh 'mounts and storage - mount sd card' option in cwm.