Database Users

[Q] Is my phone bricked?

First thing is first :
Radio 2.12.50.02.2
aMAGLDR 1.11
CWM Recovery 3.0.0.5
SPL 2.0.8
I was flashing from a custom nand to Hyper Droid CM7 v1.0.3. Now that I boot my phone it goes through magldr like normal but loaded zimage, says: load done ...123456 GOGOGO
Then it boots up into CWM recovery.. I tried to install the zip from here and it formats the boot and the system like normal... then copy's all the files to system. The install completes like normal. Then I reboot and it goes right back into CWM recovery. I have tried to flash other roms.. but now my phone wont active sync with my computer. I can only mount it. Any help would be amazing at this point. I have been troubleshooting this brick for the past 5 hours..
Thanks in advance for any help

I'm assuming i will have to start from scratch with wm 6.1... if so how would i flash the os to the phone is my phone doesnt sync with wmdc?

Gunblade77 said:
First thing is first :
Radio 2.12.50.02.2
aMAGLDR 1.11
CWM Recovery 3.0.0.5
SPL 2.0.8
I was flashing from a custom nand to Hyper Droid CM7 v1.0.3. Now that I boot my phone it goes through magldr like normal but loaded zimage, says: load done ...123456 GOGOGO
Then it boots up into CWM recovery.. I tried to install the zip from here and it formats the boot and the system like normal... then copy's all the files to system. The install completes like normal. Then I reboot and it goes right back into CWM recovery. I have tried to flash other roms.. but now my phone wont active sync with my computer. I can only mount it. Any help would be amazing at this point. I have been troubleshooting this brick for the past 5 hours..
Thanks in advance for any help
Click to expand...
Click to collapse
Did you try to reflash Magldr again, CWM recovery, then Android Rom again?

would i be able to do that without my phone syncing with the comp?

I tried it and it booted to CWM recovery

Gunblade77 said:
would i be able to do that without my phone syncing with the comp?
Click to expand...
Click to collapse
Yes, u should flash magldr 1.13, not magldr 1.11 because it will give stuck at GoGoGo. U need to enter bootloader to flash magldr 1.13.
Edit:sorry my bad. 1.11 wont give u stuck at gogogo, but flash 1.13 this time.

Do you actually know what you're doing? Your phone is most certainly not bricked. WMDC is useless once you don't have WinMo on your phone. I think the problem is your radio. Download and flash the 2.15.50.14 radio. It's the newest one. Then flash away and it should work. If not, task 29, reflash MAGLDR and then flash your ROM from clockwork.
Sent from my HTC Vision using XDA App

Ok i got the new mglrd and radio.. now when you tell me to flash the rom from cwm.. you mean from zip right?

ok so I installed from zip and the phone booted up into CWM yet again. Telling me that it failed to find cache/recovery/command, cache/recovery/log.
Failed to find cache partition to mount to cache.
I did update the radio and mglrd like you said.

I had the same problem I task 29'd it then flashed the build via splash mode
Sent from my HTC HD2 using XDA App

Just do the following
Below was taken from Tyween "TyphooN CyanogenMod 7 RC2+ v2.8.0"
1. Task 29
2. Flash Radio(2.15 Recommended)
3. MAGLDR 1.13
4. ClockworkMod Recovery v1.3 135M System/44M Cache/Recovery v3.0.1.9
5. Install TyphooN CyanogenMod 7 .zip with CWM

What i would do is download a stock rom, it will probably come as a single .exe file. rename the extension from .exe to .7z (if you have 7zip, im sure u can name it to what ever archieve program u have) then extract it. find the signed.nbh file and extract that. Then rename LEOIMG.nbh and put on root of sd card. power off phone and while booting hold the volume down button and the power button till you get the bootloader screen... follow prompts and then you are back to a stock hd2

I got it running now thanks for all the help guys. I just flashed a stock rom and changed the radio.
Sent from my HTC HD2 using XDA App

i think its needed to have a 2gb partition for ur sd xard befare install a rom.. partiton ur sdcard with cwm..
Sent from my HTC HD2 using XDA Premium App

Gunblade77 said:
I got it running now thanks for all the help guys. I just flashed a stock rom and changed the radio.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA Premium App

try this:
1) ensure you have magldr 1.13 loaded
2) boot into CWM
3) Do a wipe
4) re-download the ROM zip file (you could have gotten it corrupted somehow on the download)
5) put it on your SD card, load up CWM, flash choose.zip and find your ROM
6) after the flash do another wipe on CWM
7) restart your phone and from magldr load android from nand
edit: lol nvm, apparently I didn't see there was a page 2. Good job on gettin it running

orangekid said:
try this:
1) ensure you have magldr 1.13 loaded
2) boot into CWM
3) Do a wipe
4) re-download the ROM zip file (you could have gotten it corrupted somehow on the download)
5) put it on your SD card, load up CWM, flash choose.zip and find your ROM
6) after the flash do another wipe on CWM
7) restart your phone and from magldr load android from nand
edit: lol nvm, apparently I didn't see there was a page 2. Good job on gettin it running
Click to expand...
Click to collapse
lol thank you this would have helped also

JohnnyVolcom5 said:
What i would do is download a stock rom, it will probably come as a single .exe file. rename the extension from .exe to .7z (if you have 7zip, im sure u can name it to what ever archieve program u have) then extract it. find the signed.nbh file and extract that. Then rename LEOIMG.nbh and put on root of sd card. power off phone and while booting hold the volume down button and the power button till you get the bootloader screen... follow prompts and then you are back to a stock hd2
Click to expand...
Click to collapse
you're really telling him to go back to full stock, with stock spl, that's not necessary, if he has hardspl already, he doesn't have to go thru that again, task 29 will remove all traces causing issues, so all he needs is task 29, radio 2.15.50.14, MGLDR, CWM with the proper partition, and flash desired rom from clockwork.

Unable to use flash using CLK and Clockworkmod

Hi All
I don't know what I am doing wrong so I hope someone can help me.
I have tried using Clockworkmod and CLK but i am not able to flash my rom with any of them. I sometimes get a HTC screen but then nothing else. Sometimes my HD2 just reboots after a few seconds.
I have followed the guides word for word and tried CLK but still nothing.
I can update my rom using DAF, but all new roms come out in zip format only.
I have updated my radio to "Radio Leo 2.15.50.14"
I am doing something wrong? Can it be my SD card?
I hope someone can help.
Thank you in advance

Wrong forum.

I'm having the exact same issue - I was just about to open a new thread here but saw this thread and a post stating wrong forum - Please advise where can I post it?
Many thanks

LMGray said:
Hi All
I don't know what I am doing wrong so I hope someone can help me.
I have tried using Clockworkmod and CLK but i am not able to flash my rom with any of them. I sometimes get a HTC screen but then nothing else. Sometimes my HD2 just reboots after a few seconds.
I have followed the guides word for word and tried CLK but still nothing.
I can update my rom using DAF, but all new roms come out in zip format only.
I have updated my radio to "Radio Leo 2.15.50.14"
I am doing something wrong? Can it be my SD card?
I hope someone can help.
Thank you in advance
Click to expand...
Click to collapse
What ROM are you using?
What is System partition Size for that Rom you're using?
Have you used right partition size while flashing MagLdr or Clk?
And have you used Ksubedi's Toolkit?
Because the symptom you're describing is only experienced when you use a partition size smaller than what is recommended.
For example if the Rom requires a partition of ATLEAST 200M and you flash a partition of 150M. You will get stuck at the Logo Screen. AKA HTC Screen. Or as you proclaimed, it won't even boot. So please provide more information as to which Rom and partition size you used and I will try my best to help you.
And don't pay any attention to A jerk telling you "Wrong Forum"
We will help no matter where you post it.
And Spuri give your Rom and install method, I will try my best to help you as well.
Sent from my HTC HD2 using XDA App

Thank you so much - here it goes..
I've been flashing Android roms for a while but for the last couple of weeks I'm having issues with installing any CWR/CLK rom - After flashing the rom, the screen is stuck at GO GO GO and then it goes in a boot loop. I have searched and I have followed all the steps down to the T. Anyway, following are the steps I have taken so far:
Format SD Card using SD Formatter
HSPL3 (2.08)
Task 29 (Using HD2 NAND Toolkit)
Install Radio (2.15) (Using HD2 NAND Toolkit)
Install MAGLDR (Using HD2 NAND Toolkit)
System Partition (As Recommended by the Chef) (Using HD2 NAND Toolkit)
wipe cache partition
Wipe Dalvik Cache
Partition Card with 1GB (As Recommended by the Chef)
install zip from sdcard
Fix Permissions
Reboot
Currently, I'm using BOYPPC-SHIFTPDA_Desire HD A2SD V20 (21.Jul) via DAF method without any issues.
I have used different SD cards but no luck - Currently I'm using 16GB Lexar Class 4. I can flash fine via DAF method. I have also done dual boot with Android and Windows Mobile without any problems. So,if I have successfully run an Android via a SD card (dual boot) so obviously SD card is not the problem?
This is really doing my head in so if anyone can help me with this, that'd be great.
Many thanks

Okay. Try to find Coredroid v1.6. Go here: http://hotfile.com/list/1335611/19f8a51 download the second file. There are instructions in there that you can follow. And since you have already partitioned SdCard, you can skip that part. And Btw, you don't need to do the "Fix Permissions" thing that you stated before. That is only done when you experience problems with apps in the Roms after first boot. And for the above Rom use a partition size of 400M.
Sent from my HTC HD2 using XDA App

rafiqzadah said:
Okay. Try to find Coredroid v1.6. Go here: http://hotfile.com/list/1335611/19f8a51 download the second file. There are instructions in there that you can follow. And since you have already partitioned SdCard, you can skip that part. And Btw, you don't need to do the "Fix Permissions" thing that you stated before. That is only done when you experience problems with apps in the Roms after first boot. And for the above Rom use a partition size of 400M.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thanks for your prompt response - Btw, I forgot to mention that I have a LEO 512 - should I still install the second file which is for LEO 1024?

Rofl sorry ignore the step 1 and then jumping to 3. Just do this exactly. And I have adjusted the file to a EU version Rom with partition of 190m. And so with your SD that was partitioned already, you should be good to go.
1. Go here and Download. http://www.multiupload.com/ZH0WFJBT6P
3. On second Link download HD2_Core_Droid_Desire_HD_V1.6_TMOUS_NAND_ONLY_LEO1 024.rar file 4. In Toolkit Do "Task29." Then Flash MagLdr with size 190M and cache size 5M. 5. After the Flash of Magldr. Boot into MagLdr by HOLDING DOWN!!! Power Button during bootup. 6. Go to Option "5. Usb Flasher." and wait for "Wait USB...USB." 7. Once "Wait USB...USB." is confirmed. Go to the "Daf.exe" file in the COREDROID V1.6 file you downloaded before and "RUN AS ADMINISTRATOR." 8. Once Finished Reboot into MagLdr AGAIN. This Time go to Option "8. AD Recovery." 9. Since you have already Partitioned SD. Then no Need to do so again. 10. Go to "Mounts and Storage" Then "Mount USB Storage" 11. Copy the Pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip to SD. 12. Once finished Hit the "BACK ARROW" Button. 13. Go down to "Flash ZIP From SDCard" then "Choose Zip from SDCard" 14. And Pick Pyramid_HTC_WWE_1.35.401.1_v1.5_EU.zip and flash. 15. Once finished, Reboot Phone, Leave it for about 20 Minutes because its First Boot. And Your Done. 16. Hit Thnx if this Helped.
Sent from my HTC HD2 using XDA App

Sorry, I'm a bit confused - Do you want me to flash Pyramid rom or core droid rom? For Pyramid rom, use 190M and for Core Droid 400M right? I did previously try flashing the latest Pyramid rom which 1.7 bit it didn't work - I used 200M for that but I'll try your recommendation and see how it goes.
Thanks.

Yes try the pyramid Rom with my steps exactly and you should be fine. But you have to run the Daf.exe from the Coredroid Rom once you are in Option "5. USB Flasher"
Sent from my HTC HD2 using XDA App

rafiqzadah said:
Yes try the pyramid Rom with my steps exactly and you should be fine. But you have to run the Daf.exe from the Coredroid Rom once you are in Option "5. USB Flasher"
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
One final clarification - You mentioned that I should install 190/5, when I install DAF.exe from the core droid folder, wouldn't that override the 190/5 as I was under the impression that DAF.exe was a partition size as well.
Thanks
EDIT: This step 'Then Flash MagLdr with size 190M and cache size 5M.' I don't understand either - After Task 29, shouldn't I be installing mag and then flashing the 190/5 partition?

Ok - I followed the steps and after flashing the rom, the screen is stuck at GO GO GO - I'm sick of this - I just don't know what's the issue.
Anyone?

I tried flashing HD2_Core_Droid_Desire_HD_V1.6_Release_Version and that's stuck at GO GO GO screen as well.

spuri78 said:
I tried flashing HD2_Core_Droid_Desire_HD_V1.6_Release_Version and that's stuck at GO GO GO screen as well.
Click to expand...
Click to collapse
What flash.cfg did you use for CWR?
The reason of GO GO GO is in my opinion because of small CWR flash.cfg. Because I had the same problem and I just changed as it was in the rom's topic.

dawid. said:
What flash.cfg did you use for CWR?
The reason of GO GO GO is in my opinion because of small CWR flash.cfg. Because I had the same problem and I just changed as it was in the rom's topic.
Click to expand...
Click to collapse
I used the following:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 10M
system ya 390M
cache ya 5M
userdata ya|asize|hr allsize
Just want to reiterate that the GO GO GO issue is after flashing the rom - I can boot in CWR fine - The weird thing is that I have always followed what the chef has recommended in his/her rom - This issue has had me stumped - I virtually can't install any NAND rom - Maybe I should try a third SD card? I just don't know.

Did you try to install the one I gave to you?
Because from what I can see you are trying to install build with HTC SENSE right?
Try to install the one I gave you it is simple clean gingerbread rom.
If you tried then I don't know, try task29 and then try to install it all again.
Or try installing SD card version

Okay I will give you exact instructions. And BTW the Daf.exe is so you can boot into AD Recovery in MagLd.
1. Task 29.
2. Go to toolkit and Center Left you will see box with sizes of 150 200...... Click on 200M. Under that box is a little box with 45M as default cache size, change it to 5M.
4. Go in MagLdr. This is what I mean, try to go to Option "8. AD Recovery." It wont right? So go into Option "5. USB Flasher" and run the Daf.exe from the Coredroid folder and run as administrator.
5. Once finished boot into MagLdr once more this time going to Option "8. AD Recovery."
6. (This step is optional, but mandditory if you have not done so already)Once in AD Recovery, go to "Advance" menu, partition SdCard, and use the size 1024M,it will ask for swap size next, use 0M.
7. Once partitioned, go back to "Mounts and Storage" then to "Mount USB Storage."
8. Once mounted, copy the Pyramid Rom to root of SdCard. Once finished, hit back arrow once.
9. Go to "Install ZIP from SDCard" then "Choose ZIP from SdCard" and choose the Pyramid Rom. Let the flashing finish. And reboot phone.
10. Let the phone settle for 5 minutes in first boot, go through Setup. Then reboot phone.
Sent from my HTC HD2 using XDA App

dawid. said:
Did you try to install the one I gave to you?
Because from what I can see you are trying to install build with HTC SENSE right?
Try to install the one I gave you it is simple clean gingerbread rom.
If you tried then I don't know, try task29 and then try to install it all again.
Or try installing SD card version
Click to expand...
Click to collapse
I was trying all the HTC Sense builds but even a MIUI build giving me headaches - Obviously, I'm doing something wrong but can't figure it out - I have tested the SD card version and that works fine i.e dual boot Windows Mobile and Android - Sorry, which gingerbread rom you want me to install?
I'm heading to work - will try when I get back

spuri78 said:
I was trying all the HTC Sense builds but even a MIUI build giving me headaches - Obviously, I'm doing something wrong but can't figure it out - I have tested the SD card version and that works fine i.e dual boot Windows Mobile and Android - Sorry, which gingerbread rom you want me to install?
I'm heading to work - will try when I get back
Click to expand...
Click to collapse
Download CWR 4.0 and flash it in MAGLDR (it has configured parition size for this rom so just flash it don't change anything): http://www.multiupload.com/VZ1WB57AOY
then
Download this rom: http://www.multiupload.com/8UPNV5WUZU and install it in CWR.

one option: switch to DAF(MAGDLR)....

Android Splash Start-up hanging

Hey guys long story short, i have tried to install android on my htc hd2 after not likind windows mobile at all.
Ok installed hardSPL 2.08...ok
task 29.... ok
radio 2.15.50.14 ....ok
mgldr 1.13....ok
run DAF.exe and rom installs fine, mgldr loads and goes to boot but says denied.
so i retried everything and this time tried the CMR way and istalled clockwork, again fine, then downloaded compatible rom for it and installed of sc card and flashed fine, now when it loads the android fella comes on but hangs,
so i then tried the CLK way, again everything installs fine but the rom still hangs,
any suggestions?

forgot to mention i used the 400mb partition size

laytonanthony said:
forgot to mention i used the 400mb partition size
Click to expand...
Click to collapse
Hi,
So what have you got on your phone now?cLK or ,magldr?
And which ROM are you trying to install?

LOL nothing atm just task29 to delete it off, and the rom i would like is [CWR-CLEAN] BOYPPC-SHIFTPDA_GINGER 2.3.4-HoneyComB V29 (12.Jun)
just cant seem to get it to work

ok updating back to factory rom now of HTC website, any pointers after as im gunna go for it again lol! Hate windows 6.5 and 7..

laytonanthony said:
ok updating back to factory rom now of HTC website, any pointers after as im gunna go for it again lol! Hate windows 6.5 and 7..
Click to expand...
Click to collapse
Hi,
Seems like you were doing everything correctly.
According to [OP]:
2.Flash Recovery
- Goto MAGLDR113 menu
- Choose USB Flasher (use Volume down/Volume up button, then press Call button)
- Connect your phone to PC
- Run DAF.exe and follow guide step by step
- Phone auto reboot and go to MAGLDR113 menu
3.Flash rom by recovery.
- copy rom boyppc-shiftpdaxxx.zip to sd card
- goto magdl menu
- ad recovery
- install zip from sdcard
- choose zip from sdcard
- boyppc-shiftpda xxx.zip
- yes.....waiting android boot.....
Make sure you use a card reader to transfer rom to sd card.Less chance of corrupting files.
P.S. ROM can take 15-20 minutes to boot

ok so that rom i posted above will work on mgldr but also will support clockwork!

laytonanthony said:
ok so that rom i posted above will work on mgldr but also will support clockwork!
Click to expand...
Click to collapse
HI,
Magldr is the bootloader(required)
Clockworkmod will flash the necessary partition for the system to run.

ok just tries the DAF.exe way throught MGLDR option 5 usb, installed, went to boot and went to boot and got "NAND kernal open failed"
hmmmm

laytonanthony said:
ok just tries the DAF.exe way throught MGLDR option 5 usb, installed, went to boot and went to boot and got "NAND kernal open failed"
hmmmm
Click to expand...
Click to collapse
Have you partitioned your sd card?

partition sd card? .....

laytonanthony said:
partition sd card? .....
Click to expand...
Click to collapse
OK,
Before flashing clockworkmod,go to magldr>ad recovery>advanced>Partition SD Card.1024m with 0 cache

ok partitioned, what next pal!

laytonanthony said:
ok partitioned, what next pal!
Click to expand...
Click to collapse
2.Flash Recovery
- Goto MAGLDR113 menu
- Choose USB Flasher (use Volume down/Volume up button, then press Call button)
- Connect your phone to PC
- Run DAF.exe and follow guide step by step
- Phone auto reboot and go to MAGLDR113 menu
3.Flash rom by recovery.
- copy rom boyppc-shiftpdaxxx.zip to sd card
- goto magdl menu
- ad recovery
- install zip from sdcard
- choose zip from sdcard
- boyppc-shiftpda xxx.zip
- yes.....waiting android boot.....
Make sure you use a card reader to transfer rom to sd card.Less chance of corrupting files.P.S. ROM can take 15-20 minutes to boot

ok pal i tried partitioning sd-card and was sucessful, then i tried the DAF.exe install and again failed so then i transferd the zip file over to the SD card and installed of card, and what do you no it,,,,, hey presto it worked, took some time to book but it booted lol.
thanks a bunch, send me a donation paypal link or even just ur paypal address and ill send you a drink over
again thank you fella!

+1 thanks was lookin for this answer all day thanks

[Q] Can someone help me... please..

I'm here with one week old HTC HD2 (TMOUS) unlocked version (from BestBuy). I bought this to install Android. But after reading/searching hours and hours about installing instructions, I'm kinda confused now. I can install but don't know which one to begin and what goes after... pretty much the order of installation.
Currently, I have,
Windows Mobile 6.5 stock ROM
RAM 567MB
Flash memory size 1024MB
ROM version 3.14.531.1(04666) WWE
Radio version 2.15.50.14 (do I need to reflash radio?)
Manila version 2.5.20181424.0
Do I need to re-flash Radio?
I prefer to install cLK bootloader after reading 'senior member T-Macgnolia's' tutorial. Can someone kindly tell me, what to install and in which order?
How do I find cLK versions of HD2 Android ROM's? Any suggestions for better ROM?

Hi!!!
I don't use clk, I prefer magldr, but this is a guide to use clk:
http://forum.xda-developers.com/showthread.php?t=901305
hope it'll help you, otherwise someone else can help you better than me.
Your radio version I think is correct, I use it too, like all other people I think...
You find clk version of HD2 rom's generally in first posts of thread about NAND rom in HD2 Android NAND Development:
http://forum.xda-developers.com/forumdisplay.php?f=928
Roms: if you want a Sense rom, this is the best in my hopinion, very fast and smooth for a sense rom:
http://forum.xda-developers.com/showthread.php?t=1250703
I actually use this, has some problems (bluetooth, camera) but I like it very very much...
Otherwise, if you prefer non-sense rom, this is the best in my hopinion:
http://forum.xda-developers.com/showthread.php?t=933951

Your radio is correct,but you should flash HSPL before you flash custom WM ROMS or android builds. Ensure you flash the correct version of HSPL for your TMOUS. And as for the better builds, you should try them out yourself.It really depends on what you want.Sense,CM7,MIUI,MAGLDR,CLK...

kawshigan said:
Your radio is correct,but you should flash HSPL before you flash custom WM ROMS or android builds. Ensure you flash the correct version of HSPL for your TMOUS. And as for the better builds, you should try them out yourself.It really depends on what you want.Sense,CM7,MIUI,MAGLDR,CLK...
Click to expand...
Click to collapse
your radio is right
u need hardspl
magldr 1.13
RECOVERY 3.0.2.4
AND THEN THE PYRAMID ROM.............BEST 1 AROUND BAR NONE

suloch said:
I'm here with one week old HTC HD2 (TMOUS) unlocked version (from BestBuy). I bought this to install Android. But after reading/searching hours and hours about installing instructions, I'm kinda confused now. I can install but don't know which one to begin and what goes after... pretty much the order of installation.
Currently, I have,
Windows Mobile 6.5 stock ROM
RAM 567MB
Flash memory size 1024MB
ROM version 3.14.531.1(04666) WWE
Radio version 2.15.50.14 (do I need to reflash radio?)
Manila version 2.5.20181424.0
Do I need to re-flash Radio?
I prefer to install cLK bootloader after reading 'senior member T-Macgnolia's' tutorial. Can someone kindly tell me, what to install and in which order?
How do I find cLK versions of HD2 Android ROM's? Any suggestions for better ROM?
Click to expand...
Click to collapse
Try reading the guides in the sitckies of the NAND Android forum, especially MSkip's tutorial on how to flash NAND Android with Clockwork Mod.
Your radio is correct.
Install HardSPL (HSPL) 2.08 first.
Then install MAGLDR (I would recommend this as it's easier than CLK from what I've read.)
Select your ROM (don't flash yet)
In the OP of the ROM there will be guides as to which CWM partition you need etc, just download the right partition size and flash it. One of the reasons I recommend MSkip's tutorial is that all of the files are at the bottom of the post.
Flash the ROM via CWM.
Seeing as in the OP you said you understand how to flash the things, you should understand that I hope. Good Luck.

Thanks Ty5982, I followed one guide and installed cyanogenmod 7 ROM. What I did was
HSPL 2.08
(didn't touch radio since it's correct)
MAGLDR Bootloader 1.13
ClockworkMod Recovery v1.3 (made v1.3 150MB partition)
then went to 8. AD Recovery and installed ROM on the SD card using ClockworkMod Recovery.
As you said now I'm really interested about PYRAMID ROM since it has SENSE. Can you please tell me where to start with now?
Do I have to remove 'ClockworkMod Recovery'? or do I need to install RECOVERY 2.4?

Nigeldg said:
Try reading the guides in the sitckies of the NAND Android forum, especially MSkip's tutorial on how to flash NAND Android with Clockwork Mod.
Your radio is correct.
Install HardSPL (HSPL) 2.08 first.
Then install MAGLDR (I would recommend this as it's easier than CLK from what I've read.)
Select your ROM (don't flash yet)
In the OP of the ROM there will be guides as to which CWM partition you need etc, just download the right partition size and flash it. One of the reasons I recommend MSkip's tutorial is that all of the files are at the bottom of the post.
Flash the ROM via CWM.
Seeing as in the OP you said you understand how to flash the things, you should understand that I hope. Good Luck.
Click to expand...
Click to collapse
Thanks for the input. I did my first ROM installation... whhooohhoo . Thanks for all the help you all give here.
Now I'm really interested about PYRAMID ROM. But installation instructions doesn't say anything about CWM partition and it talk about different tools (http://forum.xda-developers.com/showthread.php?t=1185087)
Can you please tell me how I can remove this ROM and install PYRAMID ROM. Where should I start?

explanation made easier
make sure u av recovery 3.0.2.4 extracted on ur pc
right click on flash file NOT FLASH CFG and open it
CHANGE THE NUMBERS SO IT LOOKS LIKE BELOW:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 180M
cache ya 5M
userdata ya|asize|hr allsize
ONCE DONE,CLICK SAVE,NOT SAVE AS AND EXIT THE BOX
reeboot ur phone and keep hold of the power button so the magldr menu appears
go to USB FLASHER and select it
plug ur phone into ur pc
you should see USB............USB
when u do,go to the recovery folder and RIGHT CLICK ON DAF and RUN AS ADMINISTRATOR and click continue or yes or allow,what ever ur pc says
let it do its thing,then it reboots itself.
THIS WILL REPLACE YOUR OLD RECOVERY AND STAY THERE UNTIL U FLASH ANOTHER RECOVERY IF U EVER DO
when it does,unplug the usb from ur phone,keep hold of the power button again,but this time select AD RECOVERY
then select wipe cache,wipe data-factory reset,then go back and select ADVANCED and wipe dalvik cache,then select PARTITION SD CARD, select 2048M then select 0M,takes about 5 min.
THIS WILL WIPE UR SD CARD,SO BACK ANYTHING UP U NEED
then put the rom on ur sd card
go to magldr menu AGAIN and select ad recovery but this time select install zip from sd card,then select choose zip from sd card,choose ur rom,should start with NDT if its the same as mine lol,takes 10 mins max..........then your all done.........
when it boots up and the setup wizard appears,DO NOT SET UP,NO GOOGLE ACCOUNT OR WIFI,JUST KEEP ON CLICKIN NEXT,NEXT,NEXT,then when the home screen appears finally lol go to ur apps and click on QUICKBOOT and choose reboot,this time,fill in everythin on ur setup wizard..........then when it goes to the home screen,leave it for a min,REBOOT FOR THE LAST TIME,then the rom should settle......hope u enjoy it as much as i do.........
SORRY FOR THE LONG LIST,BUT THERE ARE SO MANY PPL ON ERE THAT JUST GIVE U A LINK WHEN U ASK FOR HELP...........I AINT 1 OF THEM,let me no how u get on and i'll then help u to tweak it to the max to get the best performance lol
HOPE THIS HELPS...................FEEL FREE TO HIT THANX

Ty5982 said:
make sure u av recovery 3.0.2.4 extracted on ur pc
right click on flash file NOT FLASH CFG and open it
CHANGE THE NUMBERS SO IT LOOKS LIKE BELOW:
misc ya 1M
recovery rrecov|ro|nospr filesize recovery-raw.img
boot yboot|ro 5M
system ya 180M
cache ya 5M
userdata ya|asize|hr allsize
ONCE DONE,CLICK SAVE,NOT SAVE AS AND EXIT THE BOX
reeboot ur phone and keep hold of the power button so the magldr menu
Click to expand...
Click to collapse
Thanks for the instructions (hit the button ) and I greatly appreciate it. When I change FLASH file, how important is that numbers and how it change the behavior of my ROM?
I'm asking because I saw your first reply and went to SENSE 3.0 PYRAMID V 6.0 ROM and installed it. But original thread instruct to change " system ya 160M " and yours 180M.
Some how I managed to install it and first it was okay but I noticed ROM is kind of slow and Wi-Fi didn't work.
Any help with that issue??? (anyway I'm gonna re-flash it with your instructions)

Help - NAND installation MGLDR

Hi guys
Im currently an SD user.
I want to install this via nand: http://forum.xda-developers.com/showthread.php?t=1250703
I used to use MGLDR etc, is there an easy way to install this? As i cannot find exact info. As there is stuff like CLK and clockwork recovery mod.
Can anynone provide me an easy installation method to do this?
I will really appreciated. I love Android, i dont think i want to boot via WM anymore, and im sure this will also increase the performance? Thanks!!

Have you even tried to look for everything yourself?
I mean, you should have looked for "what is cLK, MAGLDR and CWM?"After doing that little search you should have known that the easiest way to do it is through the NAND toolkit stickied in the NAND forum after (of course) choosing which bootloader you want to use

I would start here:
http://forum.xda-developers.com/showthread.php?t=1044830
If you get stuck on something, just ask and I'll see if I can help you out.

after install MGLDR 1.13, my HD2 Doesnt start
Hi,
After installing MGLDR 1.13 my HTC HD2 doesnt start, I have just the HTC screen(whit screnn with HTC in green), it's freeze no menu.... nothing at all, just the white HTC Screen
Can please some one help me

You need to install a rom... download a daf file rom for your hd2 on to your computer... unzip it... run the daf file... do all this your phone have to be plug in to your computer... in magldr... select USB flash... wait for it to say.... USB....USB. then run daf file that you just unzipped....
Or install clockwork mod recovery (install through USB flasher) with the right partition for the rom.... the rom have to be for magldr... the downloaded rom also have to be transfer to your SD... but into magldr... select ad recovery... then follow prompt... this is the best way to flash rom...
Sent from my LG-P999 using XDA App

neolan said:
Hi,
After installing MGLDR 1.13 my HTC HD2 doesnt start, I have just the HTC screen(whit screnn with HTC in green), it's freeze no menu.... nothing at all, just the white HTC Screen
Can please some one help me
Click to expand...
Click to collapse
Google or Search here how to flash HSLP to a version needed for this ROM. Be sure also having the right MAGDLR version installed after HSPL. (easier to change than SPL).
I recommend using CWM. (press long red button while booting - go 8. Recovery AD - mount USB - get .zip of ROM on SD and install from .zip)
I recommend you to make sure your SPL version and MAGLDR versions are right before continuing. Also a total wipe or SD formatting (just search here for the stickies) must be (optional) done.
The white screen comes from ? Just guess ? Did you install a ROM ?

If it were no rom flashed, it would stop at the magldr menu. If a phone goes straight to bootscreen after flashing magldr it means either the spl isn't 2.08.hspl or the radio isn't a 2.xx.50.
@neolan enter bootloader, set 2.08.hspl, re enter bootloader, flash radio 2.15.50, the phone will now start into magldr and you can proceed flashing cwm.