Database Users

[Q] Using CWM 3.0.0.* to install HyperDroidGBX

Hi
I'm already install the Nexus android Nand on my HD2 T-Mobile using te special version of CWM 3.0.0.3
Now I need to try the Hyberdoid GBX, should I remove the 3.0.0.3 (and how??) to use the 150M version (V 1.3 I think) or I can use the CMW 3.0.0.3 to install the HyberdroidGBX
Thanks any way guys, U inspired me a lot

Call me stupid, but if it was me i'd:
1: Ask in the actual thread of the build
2: Follow the instructions how to install that build, written by the developer
or am i just stupid??
anyways.......step by step....just follow what dev has recomended.
Dunno bout you, but if an expert like the Dev has put a build together and he recomends..."install this"....."flash that" etc etc etc...then prob in best interests to do how he explains and install what he says is needed.
1. HyperDroid Installation
==========================
You should have at least MAGLDR 1.13 on device.
You should also have Clockworkmod (CWM) Recovery v1.3 by RaiderX303 installed.
Short version:
Install ROM from zip using CWM (Full Wipe Recommended if coming from another ROM)
Step by step version:
1. Boot into MAGLDR (Power On and HOLD the Power Button till MAGLDR options are shown)
2. Boot into AD SD or AD Recovery to enter CWM Recovery Mode
3. If coming from another ROM, do a Nandroid Backup (just to be sure)
4. Wipe data
5. Wipe cache
6. Wipe Dalvik Cache
7. Go to mounts and storage and mount sdcard
8. Copy the ZIP you downloaded to your sdcard and unmount
9. Select install zip from sdcard
10. Find the HyperDroidGingerbread.zip and install
11. Reboot and remove Phone from USB
12. After initial setup, reboot to get everything settled
13. Enjoy the Clean, Fast, Minimalist Gingerbread HyperDroid Goodness!

i can't install MAGLDR113_DAF.. any1 help pls??

closemyeyes said:
i can't install MAGLDR113_DAF.. any1 help pls??
Click to expand...
Click to collapse
dont use that, from bootloader screen (tricolor) use the ROMUpdateUtility.exe.

matthew33 said:
Call me stupid, but if it was me i'd:
1: Ask in the actual thread of the build
Click to expand...
Click to collapse
ur not of course
I cant ask in the actual thread of the build because I'm new member (less than 10 posts) and the nand development section restricted for me
this is the link of the build I already installed (I'm not even able to quote)
u notice that he said under installation :
Installations
===========
You should have at least MAGLDR 1.13 on device.
CWM (ClockworkMod) Recovery Version via SD card (Flash update.zip)
Installing the CWM_Recovery_for_NexusHD2 (135MB system and 2MB cache) to create a space-efficient NAND partition layout (via flash.cfg) designed specifically for NexusHD2 series is highly recommended if coming from another ROM.
now I'm going to install This Build
I'm asking if there is a problem if I use the same version of CWM or NOT
Thanks for help

[Q] sense 3.5 roms stuck at boot screen

hi guys i have used the Recommands partition for the roms 1GB ext4 partition on my sdcard and tried 2GB, flashed WIPE IT and wiped dalvik also tried task29 and started from scratch, any help would be much appreciated really want to try sense 3.5
thanks

Hi, a possible cause of problem - check your zip file (ROM), copy it to PC and try to unpack, may be it's broken. Sometimes you don't have error message when flashing, but when check on PC it shows errors.

thanks mate i will give that a try

i just extract the 2 roms i have been trying to get to work they seems ok

have you got the correct partition size for the rom ?

Which Sense ROM are you using, anyways?

Try a ext 3 partition on your sdcard then run clean install

thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again

cozman85 said:
thanks guys im sure that i have the correct partition size used HD2 tools and i have been trying to run SENSATION XL ROM EU Clk V 1.0, TBD_Runnymede_sensation_xl and not sure if i have a ext 3 partition i used cLk to partition the sd card thanks again
Click to expand...
Click to collapse
Have a look at this it enables you to see your partition and convert or revert, might be of some interest to you..... Good Luck.
http://forum.xda-developers.com/showthread.php?t=1154221

can that be flashed on the hd2

cozman85 said:
can that be flashed on the hd2
Click to expand...
Click to collapse
yep... just install via cmw and it will reboot go into ad recovery and you'll see some new options.
Note:Once you reboot it will be gone, if you want it back repeat install.
Nice and handy - Check it out..
Edit: I'm using 4EXTRecovery v2.1.3 RC2 - No problems.

i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext

same problem
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(

Nickman_83 said:
good morning everbody,
i have same problem - for days i am trying to flash a newer rom and after installing my phone is always keeping to show the bootup logo of each rom i flashed.
i use the magloader 1.13, the recovery 3.0.0.5 and the radio 15.
i am able to install the stock rom of winmo 6.5 from htc (vodafone) an everthing is fine. but going back to a custom android rom is not working anymore.
even if i try to go the "right" way, means:
having the winmo rom --> flashing radio --> flashing magloader --> flashing recovery --> wiping data/reset, wiping cache, wiping that dia*** --> putting rom.zip on the sd card via pc --> installing the zip via recovery. that all works until the phone has to boot. i tried over 8 different roms.
befor i startet to update, i hab an coredroid rom v1.3 and it was booting.
perhaps anybody knows whats my problem with this nd lets me now what i have too look for?
great thanx, cause until now i can only go back to my stock winmo rom and thats boring to me... :-(
Click to expand...
Click to collapse
cozman85 said:
i have had a go at 4EXTRecovery created ext3 and tried ext4 1gb partitions
and copied the rom over through 4EXTRecovery but the rom always hangs at wipe sd-ext
Click to expand...
Click to collapse
I'd try this: Back up sd if required.
1/ Remove sd from ph and place in a card reader on pc use "SDFormatter" change options format type to Full (Erase) this will erase the Ext Partition & format the card. Put the card back in the ph.
2/ Volume Down + Power Tri color connect usb. Using "HD2 Toolkit" do Task29 this will wipe the ph.
3/ Tri color Using "HD2 Toolkit" install Magldr (don't know about cLK)
4/ Boot ph go into Magldr navigate To "usb flasher" Using "HD2 Toolkit" select "Magldr repartition" Make sure that you are using the recommended partition size for your rom! Flash partition as directed. Ph will reboot go into "ad recovery" "advanced - partition sd card" select 1024m - 0M this will create 3EXT partition. (Some roms are not compatible with 4Ext) Reboot into "Recovery" select "mount sd" move your "Rom.zip" to sd. Close "mount sd" and select "Install zip from sd - Choose zip from sd" select the zip and install and reboot! .....

thanks everyone for your help after a week digging it was my sd card put a new one in and now running sense 3.5 . thanks again

@ a3r0n1 :
thansk for your advise. it took me some days cause i had no time but after i did exactly what you wrote, my newest coredroid rom is running.
Many Thanks !!!!

[Q] HELP ME! I dont know how to uninstall MAGLDR

I was installing Gingerbread on my HTC HD2, but I extracted the files in the gingerbread zip. He said not to extract it. I did not read that part. Now I have no zip to use with clockworkmod. I dont know what to do, I cant bypass the screen. Is there anyway to reset my phone to stock so I can redo this all over again? Please help me.
Or is there a way to by pass it?
Help me! I want my phone to be stock again!
If you cant bypass it how can I uninstall MAGLDR!!

ImNewHelp said:
I was installing Gingerbread on my HTC HD2, but I extracted the files in the gingerbread zip. He said not to extract it. I did not read that part. Now I have no zip to use with clockworkmod. I dont know what to do, I cant bypass the screen. Is there anyway to reset my phone to stock so I can redo this all over again? Please help me.
Or is there a way to by pass it?
Help me! I want my phone to be stock again!
If you cant bypass it how can I uninstall MAGLDR!!
Click to expand...
Click to collapse
bootloader> task29> rum windows mobile
That simple

[/COLOR]Erm, why would you need to do any of it again? You unzipped the rom,,, so what? Delete what you unzipped, get the zip again, put it on SD without unzipping, start phone with power held --> magldr option 8 ad recovery --> starts cwm, from there choose 'wipe data factory reset' just to be sure the partitions are clean (i(f you are gonna make an sd ext partitiom now would be the time))then 'install zip from sd ' job done.

I would have to agree with samsamuel. there is no need nor would "bootloader> task29> rum windows mobile" fix your issue. You only need to delete the unzipped version off your SD card and replace it with the zipped version. Then follow the instructions where you left off at.

[Q] HELP ME! I dont know how to uninstall MAGLDR
[A].. to uninstall magldr is to do:
1 task 29 (wipe all data and NAND)
.. to install Android on your HD2 you must do this:
1. Power on hd2 pressing vol down (three color display) and attach USB cable
2. Flash MAGLDR113 (phone is restarted and booted in magldr menu)
3. In menu with vol key select USB Flasher confirm key is green
4. Flash MAGLDR CWR 5.0.2.6 (partition size depends of the rom you are flashing)
5. Wait for magl menu and select AD Recovery (8) then select:
-mounts and storage
-mount USB storage and copy zip file from comp to sd card,go back (unmount) pres key arrow to go back to
-based recovery and select
-install zip from sdcard
Wait to ends,boot and you have android installed on your HD2!!!!

I'm kind of lost why you want to uninstall MAGLDR. If you want your phone to be stock windows mobile download your official stock rom. Extract it to get the nbh file. Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse you back to stock. I would do a search for help 1st. There are many threads already about how to flash back to stock.
What you only need to do is give a little clearer instructions on what your problem is, where your stuck at and what your trying to do.

HD2 hangs on 02 logo

please i need a perfect ROM to upgrad my phone.
here is my phone infio:
PB81100
SPL-1.42
also if i can get any magical hints on how to get HSPL to install on spl 1.42?

tr3pplea said:
also if i can get any magical hints on how to get HSPL to install on spl 1.42?
Click to expand...
Click to collapse
hmm, magic, , ,
phone into bootlaoder
connect to usb
run hspl 2
select desired spl/hspl (i'm guessing you wanna go to android, so choose 2.08.hspl)
click start or go or whatever teh button says
abaracadabara
hspl.

update failed
I have been able to upgrade the phone from SPL-2.0.8 I followed the bellow steps but it got to point and show " UPDATE TERMINATE UPADATE FAILED"
.Copy leoimg.nbh to SD card storage.
14.Disconnect USB cable from phone.
15.Open ‘File Explorer’.
16.Go to ‘Storage Card’.
17.Confirm that leoimg.nbh is in SD card root level.
18.Power off your phone.
19.Press volume down button (don’t let go) and power on your phone.
20.It will load into bootloader.
21.You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
22.Let go volume down button when you see ‘loading…’.
23.Then ROM upgrade screen will be loaded.
24.Press power button to start update the ROM.
25.ROM update process will take around 15 minutes.

Gosh, you're doing it in such a complicated way. I'll give you a simple idiot proof guide. (Android guide, as wp7 is too easy)
1. Flash the correct hspl and radio according to what the rom thread says, download links of these should be provided on rom thread.
2. Install MAGLDR (So much easier to use than CLK) From here
3. Install Clockwork mod recovery, from here
Although before flashing go onto the android rom thead that you wish you flash and on there you will see the recomended system and cache sizes. Once you unzip the clockwork download file, you should see a file called: Flash.cfg Open/edit this file and then enter the recommended files from the thread.
4. Then go onto the thread and download the nandroid rom you wish to flash.
5. Go onto MAGLDR and click on option mount storage and then mount SD card, then simply put the zip rom into the root of the sd card.
6. On Magldr select the option of Nand recovery.
7. Voila you're in Clockwork mod recovery, now clear system data, and clear cache. After that go onto additional options and clear the dalvik cache.
8.Next just simply follow the recovery steps and install zip from sd card and flash the rom.
9. Once flashed it should automatically reboot and select Nand as default boot, and load the android rom.
Simple.
Sent from my NexusHD2 using xda premium

Tenpin said:
5. Go to option 4 on MAGLDR and mount your sd card, then simply put the zip rom into the root of the sd card.
Click to expand...
Click to collapse
the magldr sd mount doesn't always work, sometimes corrupts larger files. Safer to use teh 'mounts and storage - mount sd card' option in cwm.

Boot problem or something

hello to everyone,i have a Tmobile HD2 with the latest radio and when i am trying to install EVERY android rom,when i have to go to the AD Recovery thing i got stuck...what do i need to do?

tsagas said:
hello to everyone,i have a Tmobile HD2 with the latest radio and when i am trying to install EVERY android rom,when i have to go to the AD Recovery thing i got stuck...what do i need to do?
Click to expand...
Click to collapse
What are the steps you've done so far? I know this may sound stupid, but you did flash CWM right? The other day I came across someone who was confused for ages then realised he didn't actually flash CWM

Have you Installed CWM recovery ?

Nigeldg said:
What are the steps you've done so far? I know this may sound stupid, but you did flash CWM right? The other day I came across someone who was confused for ages then realised he didn't actually flash CWM
Click to expand...
Click to collapse
I think i might havent done that...can u please give me the steps i have to do and what CWM is needed?

tsagas said:
I think i might havent done that...can u please give me the steps i have to do and what CWM is needed?
Click to expand...
Click to collapse
I followed this guide http://blog.dexterxx.pl/2012/01/07/urdroid-sensation-xl-v1-5-install-how-to-hspl-magldr-and-cmr/ the magldr version

tsagas said:
I followed this guide http://blog.dexterxx.pl/2012/01/07/urdroid-sensation-xl-v1-5-install-how-to-hspl-magldr-and-cmr/ the magldr version
Click to expand...
Click to collapse
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels

tsagas said:
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
Click to expand...
Click to collapse
Dont worry man, once you install CWM, you will be able to install a NAND rom of your choice on the internal memory of your phone. The rom you install will have everything eg. kernels, scripts. Basically all you need to do is install CWM then install a rom of your choice. Here is a guide to do install clockworkmod(CWM)
http://www.addictivetips.com/mobile...kmod-recovery-on-android-htc-hd2-with-magldr/
and here is how to install a rom using clockworkmod
1. turn off you phone
2. turn it on while keeping the power button pressed (dont let go until you see the MAGLDR menu)
3. Go to option 8 "AD recovery"
4. You will boot into clockworkmod
5. Go to mounts and storage
6. Mount the sd card(connect your phone to the pc via usb cable, and then select this option)
7. Place your downloaded rom .zip file on the sd card, root level
8. unmount your fone.
9. Go to "install zip from sd card option"
10. then select "choose zip from sd card"
11. Select the rom.
12. The rom will be installed on your fones internal memory.
13. When it is done, just reboot your phone.
14. ENJOY
NOTE: Remember to choose the correct partition size when selecting which clockworkmod to install. there are 150mb, 250mb and 400mb partitions available. The procedure to install them is the same.
Hope it helps.
any questions
Give me a thanks if you found this post useful

tsagas said:
And i also think that i might need a kernel cause when it boots it says that kernel is missing or something...but the tutorial doesnt say anything about kernels
Click to expand...
Click to collapse
Yeah, follow ^his guide. In case you get lost and want more detail, follow this guide. It also includes things such as partitioning the SD if needed.
When he talks about partition sizes, you need to look at the first post of the ROM you want to flash, and see what it says. Then use either the HD2 NAND Toolkit to flash that size, or do the following:
1. Download a CWM file (e.g. the ones at the bottom of the guide I posted)
2. Open the folder
3. Find flash.cfg (not flash.cfg.txt) and open it with notepad
4. Change the system value to the one stated in the OP
5. Save the file
6. Go to USB Flasher in MAGLDR
7. Connect phone to PC
8. Run Daf.exe in the CWM folder
9. Boot into CWM and follow the steps by adil1508 or the guide I posted to flash a ROM.

Nigeldg said:
Yeah, follow ^his guide. In case you get lost and want more detail, follow this guide. It also includes things such as partitioning the SD if needed.
When he talks about partition sizes, you need to look at the first post of the ROM you want to flash, and see what it says. Then use either the HD2 NAND Toolkit to flash that size, or do the following:
1. Download a CWM file (e.g. the ones at the bottom of the guide I posted)
2. Open the folder
3. Find flash.cfg (not flash.cfg.txt) and open it with notepad
4. Change the system value to the one stated in the OP
5. Save the file
6. Go to USB Flasher in MAGLDR
7. Connect phone to PC
8. Run Daf.exe in the CWM folder
9. Boot into CWM and follow the steps by adil1508 or the guide I posted to flash a ROM.
Click to expand...
Click to collapse
Installed CWM done everything right and i still got stuck on AD Recovery GO GO GO

http://forum.xda-developers.com/showthread.php?t=1275119 ok i want to install this rom...can someone post-write me a step by step extremely noobie guide please?if that works and my phone boots on android i will donate some money

tsagas said:
http://forum.xda-developers.com/showthread.php?t=1275119 ok i want to install this rom...can someone post-write me a step by step extremely noobie guide please?if that works and my phone boots on android i will donate some money
Click to expand...
Click to collapse
I genuinely cannot make it any simpler than this guide. When it says flash the correct partition size, use the HD2 NAND Toolkit to flash a 175mb partition.